BIS Standards Catalogue
08/30151428 DC 08/30151428 DC. BS ISO 26802. Nuclear facilities. Criteria for the design and the operat ion of containment and ventilation systems for nuclear reactors
PAS 121:2007 PAS 121:2007. Specification for active fire curtain barrier assemblies and active fire barrier assemblies with smoke rating
ISO13823 : 2008 EDTN1 ISO13823 : 2008 EDTN1. ISO13823 : 2008 General principles on the design of structures for durability
PD IEC/TR 61912-1:2007 PD IEC/TR 61912-1:2007. Low-voltage switchgear and controlgear. Overcurrent protective devices. Application of short-circuit ratings
BS ISO 9183-1:2008 BS ISO 9183-1:2008. Tools for pressing. Wear plates for press dies. Type A
BS ISO 16366:2008 BS ISO 16366:2008. Tools for pressing. L-shaped guides
08/30151689 DC 08/30151689 DC. BS EN 60601-2-43. Medical electrical equipment. Part 2-43. Particular requirements for basic safety and essential performance of X-ray equipment for interventional proce
08/30151717 DC 08/30151717 DC. BS ISO 23185. Assessment and benchmarking of terminological resources. General concepts, principles and requirements
BS ISO/IEC 15459-6:2007 BS ISO/IEC 15459-6:2007. Information technology. Unique identifiers. Unique identifier for product groupings
BS ISO 23480:2008 BS ISO 23480:2008. Tools for pressing. Sliding plates
BS EN 60664-5:2007 BS EN 60664-5:2007. Insulation coordination for equipment within low-voltage systems. Comprehensive method for determining clearances and creepage distances equal to or less than 2
BS 9124:2008 BS 9124:2008. Specification for steel and aluminium access cover systems with over 1 m clear opening
BS ISO 18373-2:2008 BS ISO 18373-2:2008. Rigid PVC pipes. Differential scanning calorimetry (DSC) method. Measurement of the enthalpy of fusion of crystallites
BS ISO 21244:2008 BS ISO 21244:2008. Agricultural equipment. Mechanical connections between towed and towing vehicles. Implement hitch rings and attachment to tractor drawbars
BS EN ISO 14744-1:2008 BS EN ISO 14744-1:2008. Welding. Acceptance inspection of electron beam welding machines. Principles and acceptance conditions
BS EN ISO 7225:2007 BS EN ISO 7225:2007. Gas cylinders. Precautionary labels
08/30152038 DC 08/30152038 DC. BS ISO 24631-1. Radiofrequency identification of animals. Part 1. Evaluation of conformance of RFID transponders with ISO 11784 and ISO 11785 (including granting and use
08/30152041 DC 08/30152041 DC. BS ISO 24631-2. Radiofrequency identification of animals. Part 2. Evaluation of conformance of RFID transceivers with ISO 11784 and ISO 11785
08/30152044 DC 08/30152044 DC. BS ISO 24631-3. Radio frequency identification of animals. Part 3. Evaluation of performance of RFID transponders conforming with ISO 11784 and ISO 11785
08/30152047 DC 08/30152047 DC. BS ISO 24631-4. Radio frequency identification of animals. Part 4. Evaluation of performance of RFID transceivers conforming with ISO 11784 and ISO 11785
08/30152055 DC 08/30152055 DC. BS EN 50518-1. Monitoring and alarm receiving centre. Part 1. Location and construction requirements
BS EN ISO 15103-2:2007 BS EN ISO 15103-2:2007. Plastics. Poly(phenylene ether) (PPE) moulding and extrusion materials. Preparation of test specimens and determination of properties
08/30152069 DC 08/30152069 DC. BS EN ISO 1628-3. Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers. Part 3. Polyethylenes and polypropylenes
BS ISO/IEC 24754:2008 BS ISO/IEC 24754:2008. Information technology. Document description and processing languages. Minimum requirements for specifying document rendering systems
DD CEN/TS 15531-1:2007 DD CEN/TS 15531-1:2007. Public transport. Service interface for real-time information relating to public transport operations. Context and framework
DD CEN/TS 15531-2:2007 DD CEN/TS 15531-2:2007. Public transport. Service interface for real-time information relating to public transport operations. Communications infrastructure
DD CEN/TS 15531-3:2007 DD CEN/TS 15531-3:2007. Public transport. Service interface for real-time information relating to public transport operations. Functional service interfaces
BS EN 3375-001:2007 BS EN 3375-001:2007. Aerospace series. Cable, electrical, for digital data transmission. Technical specification
BS EN 3645-007:2007 BS EN 3645-007:2007. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175°C or 200°C continuous. Protective co
BS EN 3645-008:2007 BS EN 3645-008:2007. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175°C or 200°C continuous. Non release p
BS EN 3660-009:2007 BS EN 3660-009:2007. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style J, straight, sealed, for heat sh
BS EN 4008-015:2007 BS EN 4008-015:2007. Aerospace series. Elements of electrical and optical connection. Crimping tool and associated accessories. Positioner for crimping tool M22520/2-01. Product st
BS ISO 23481:2008 BS ISO 23481:2008. Tools for pressing. Cam driver plates
BS EN 14255-3:2008 BS EN 14255-3:2008. Measurement and assessment of personal exposures to incoherent optical radiation. UV-Radiation emitted by the sun
PD ISO/TR 20432:2007 PD ISO/TR 20432:2007. Guidelines for the determination of the long-term strength of geosynthetics for soil reinforcement
BS ISO/IEC 15939:2007 BS ISO/IEC 15939:2007. Systems and software engineering. Measurement process
BS EN ISO 1873-2:2007 BS EN ISO 1873-2:2007. Plastics. Polypropylene (PP) moulding and extrusion materials. Preparation of test specimens and determination of properties
DD IEC/TS 62257-12-1:2007 DD IEC/TS 62257-12-1:2007. Recommendations for small renewable energy and hybrid systems for rural electrification. Selection of self-ballasted lamps (CFL) for rural electrif
BS EN 61937-2:2007 BS EN 61937-2:2007. Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958. Burst-info
DD IEC/TS 62224:2007 DD IEC/TS 62224:2007. Multimedia home server systems. Conceptual model for digital rights management
BS EN 3646-001:2007 BS EN 3646-001:2007. Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175°C or 200°C continuous. Technical specification
BS 8491:2008 BS 8491:2008. Method for assessment of fire integrity of large diameter power cables for use as components for smoke and heat control systems and certain other active fire safety systems
08/30152625 DC 08/30152625 DC. BS ISO 16110-2. Hydrogen generators using fuel processing technologies. Part 2. Procedures to determine efficiency
08/30152628 DC 08/30152628 DC. BS ISO 6550-4. Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing. Part 4. M8 x 1 glow-plugs
BS EN ISO 15302:2007 BS EN ISO 15302:2007. Animal and vegetable fats and oils. Determination of benzo[a]pyrene content. Reverse-phase high-performance liquid chromatography method
BS EN 50342-2:2007 BS EN 50342-2:2007. Lead-acid starter batteries. Dimensions of batteries and marking of terminals
BS EN 62317-1:2007 BS EN 62317-1:2007. Ferrite cores. Dimensions. General specification
BS EN 15586:2008 BS EN 15586:2008. Textiles. Methods of testing the fibre proof properties of fabrics. Rubbing test
PD ISO/TR 27609:2007 PD ISO/TR 27609:2007. Vibration in hand-held tools. Vibration measurement methods for grinders. Evaluation of round-robin test
ISO/TS24348 : 2007 EDTN2 ISO/TS24348 : 2007 EDTN2. ISO/TS24348 : 2007 Ophthalmic optics. Spectacle frames. Method for the simulation of wear and detection of nickel release from metal and combination
ISO/TR22790 : 2007 EDTN1 ISO/TR22790 : 2007 EDTN1. ISO/TR22790 : 2007 Health informatics. Functional characteristics of prescriber support systems
BS EN 60904-9:2007 BS EN 60904-9:2007. Photovoltaic devices. Solar simulator performance requirements
08/30153153 DC 08/30153153 DC. BS EN 15821. Multi firing sauna stoves fired by solid fuel. Requirements and test methods
BS EN 15542:2008 BS EN 15542:2008. Ductile iron pipes, fittings and accessories. External cement mortar coating for pipes. Requirements and test methods
BS EN 15543:2008 BS EN 15543:2008. Glass packaging. Finishes for bottles. Screw thread finishes for bottles for non-carbonated liquids
08/30153234 DC 08/30153234 DC. BS ISO 17484-2. Plastics piping systems. Multilayer pipe systems for indoor gas installations. Part 2. Code of pratice
BS EN 13577:2007 BS EN 13577:2007. Chemical attack on concrete. Determination of aggressive carbon dioxide content in water
DD ISO/TS 16952-1:2007 DD ISO/TS 16952-1:2007. Technical product documentation. Reference designation system. General application rules
BS ISO 6668:2008 BS ISO 6668:2008. Green coffee. Preparation of samples for use in sensory analysis
BS EN 15546-1:2008 BS EN 15546-1:2008. Small bore connectors for liquids and gases in healthcare applications. General requirements
PD IEC/TR 62469:2007 PD IEC/TR 62469:2007. Guidance for residual stress measurement of optical fibre
BS ISO 9644:2008 BS ISO 9644:2008. Agricultural irrigation equipment. Pressure losses in irrigation valves. Test method
PD ISO/TR 25417:2007 PD ISO/TR 25417:2007. Acoustics. Definitions of basic quantities and terms
BS EN 60539-1:2008 BS EN 60539-1:2008. Directly heated negative temperature coefficient thermistors. Generic specification
ISO16572 : 2008 EDTN1 ISO16572 : 2008 EDTN1. ISO 16572 Timber structures - Wood-based panels - Test methods for structural properties
DD ISO/TS 11073-92001:2007 DD ISO/TS 11073-92001:2007. Health informatics. Medical waveform format. Encoding rules
ISO/IECTR24800-1 : 2007 EDTN1 ISO/IECTR24800-1 : 2007 EDTN1. ISO/IEC/TR24800 : 2007 Information technology - JPSearch. Part 1:System framework and components
BS EN 61157:2007 BS EN 61157:2007. Standard means for the reporting of the acoustic output of medical diagnostic ultrasonic equipment
DD CEN ISO/TS 25377:2007 DD CEN ISO/TS 25377:2007. Hydrometric uncertainty guide
BS EN 12004:2007 BS EN 12004:2007. Adhesives for tiles. Requirements, evaluation of conformity, classification and designation
BS EN 1308:2007 BS EN 1308:2007. Adhesives for tiles. Determination of slip
BS EN 1323:2007 BS EN 1323:2007. Adhesives for tiles. Concrete slabs for tests
BS EN 1324:2007 BS EN 1324:2007. Adhesives for tiles. Determination of shear adhesion strength of dispersion adhesives
BS EN 1346:2007 BS EN 1346:2007. Adhesives for tiles. Determination of open time
BS EN 1347:2007 BS EN 1347:2007. Adhesives for tiles. Determination of wetting capability
BS EN 1348:2007 BS EN 1348:2007. Adhesives for tiles. Determination of tensile adhesion strength for cementitious adhesives
BS ISO 27107:2008 BS ISO 27107:2008. Animal and vegetable fats and oils. Determination of peroxide value. Potentiometric end-point determination
ISO/IEC14496-4 AMD20 (CDROM) HEADER ISO/IEC14496-4 AMD20 (CDROM) HEADER. ISO/IEC 14496-4 Information technology - Coding of audio-visual objects -. Part 4: Conformance testing
ISO/IEC23004-5 : 2008 EDTN1 ISO/IEC23004-5 : 2008 EDTN1. ISO/IEC23004-5 : 2008 Information technology. Multimedia Middleware. Part 5. Component download
ISO/IEC23004-6 : 2008 EDTN1 ISO/IEC23004-6 : 2008 EDTN1. ISO/IEC23004-6 : 2008 Information technology. Multimedia Middleware. Part 6. Fault management
ISO/IEC23004-7 : 2008 EDTN1 ISO/IEC23004-7 : 2008 EDTN1. ISO/IEC23004-7 : 2008 Information technology. Multimedia Middleware. Part 7. System integrity management
BS EN ISO 4044:2008 BS EN ISO 4044:2008. Leather. Chemical tests. Preparation of chemical test samples
BS EN ISO 4045:2008 BS EN ISO 4045:2008. Leather. Chemical tests. Determination of pH
BS EN ISO 4048:2008 BS EN ISO 4048:2008. Leather. Chemical tests. Determination of matter soluble in dichloromethane and free fatty acid content
DD 266:2007 DD 266:2007. Design of accessible housing. Lifetime home. Code of practice
BS EN 1113:2008 BS EN 1113:2008. Sanitary tapware. Shower hoses for sanitary tapware for water supply systems of type 1 and type 2. General technical specification
BS EN 1112:2008 BS EN 1112:2008. Sanitary tapware. Shower outlets for sanitary tapware for water supply systems type 1 and type 2. General technical specification
08/30153875 DC 08/30153875 DC. BS ISO 25720. Genomic sequence variation markup language
BS EN 12693:2008 BS EN 12693:2008. Refrigerating systems and heat pumps. Safety and environmental requirements. Positive displacement refrigerant compressors
BS EN 12899-2:2007 BS EN 12899-2:2007. Fixed, vertical road traffic signs. Transilluminated traffic bollards (TTB)
BS EN 12899-3:2007 BS EN 12899-3:2007. Fixed, vertical road traffic signs. Delineator posts and retroreflectors
BS EN 12899-4:2007 BS EN 12899-4:2007. Fixed, vertical road traffic signs. Factory production control
BS EN 12899-5:2007 BS EN 12899-5:2007. Fixed, vertical road traffic signs . Initial type testing
ISO/IEC28361 : 2007 EDTN1 ISO/IEC28361 : 2007 EDTN1. ISO/IEC 28361 Information technology - Telecommunications and information exchange between systems - Near Field Communication Wired Interface (NFC-
BS EN 50173-3:2007 BS EN 50173-3:2007. Information technology. Generic cabling systems. Industrial premises
BS ISO 15930-7:2008 BS ISO 15930-7:2008. Graphic technology. Prepress digital data exchange using PDF. Complete exchange of printing data (PDF/X-4) and partial exchange of printing data with external
BS ISO 15930-8:2008 BS ISO 15930-8:2008. Graphic technology. Prepress digital data exchange using PDF. Partial exchange of printing data using PDF 1.6 (PDF/X-5)
BS EN 50464-1:2007 BS EN 50464-1:2007. Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2500 kVA with highest voltage for equipment not exceeding 36 kV. General requirements
BS ISO/IEC 15457-1:2008 BS ISO/IEC 15457-1:2008. Identification cards. Thin flexible cards. Physical characteristics
DD ISO/TS 23165:2006 DD ISO/TS 23165:2006. Geometrical product specifications (GPS). Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty
DD ISO/TS 22600-2:2006 DD ISO/TS 22600-2:2006. Health informatics. Privilege management and access control. Formal models
ISO/IEC19775-1 : 2008 (HEADER CDROM) ED2 ISO/IEC19775-1 : 2008 (HEADER CDROM) ED2. ISO/IEC 19775-1 Information technology - Computer graphics and image processing - Extensible 3D (X3D) -. Part 1: Arch
08/30154185 DC 08/30154185 DC. BS EN ISO 10360-5. Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). Part 5. CMMs using single and m
BS ISO 24101-1:2008 BS ISO 24101-1:2008. Intelligent transport systems. Communications access for land mobiles (CALM). Application management. General requirements
BS ISO 15077:2008 BS ISO 15077:2008. Tractors and self-propelled machinery for agriculture. Operator controls. Actuating forces, displacement, location and method of operation
ISO21873-1 : 2008 EDTN1 ISO21873-1 : 2008 EDTN1. ISO21873 : 2008 Building construction machinery and equipment - Mobile crushers. Part 1:Terminology and commercial specifications
BS EN 12967-3:2007 BS EN 12967-3:2007. Health informatics. Service architecture. Computational viewpoint
08/30154286 DC 08/30154286 DC. BS ISO 8026. Agricultural irrigation equipment. Sprayers. General requirements and test methods
DD ISO/TS 16610-22:2006 DD ISO/TS 16610-22:2006. Geometrical product specifications (GPS). Filtration. Linear profile filters. Spline filters
DD ISO/TS 16610-29:2006 DD ISO/TS 16610-29:2006. Geometrical product specifications (GPS). Filtration. Linear profile filters. Spline wavelets
DD ISO/TS 16610-40:2006 DD ISO/TS 16610-40:2006. Geometrical product specifications (GPS). Filtration. Morphological profile filters. Basic concepts
DD ISO/TS 16610-41:2006 DD ISO/TS 16610-41:2006. Geometrical product specifications (GPS). Filtration. Morphological profile filters. Disk and horizontal line-segment filters
DD ISO/TS 16610-49:2006 DD ISO/TS 16610-49:2006. Geometrical product specifications (GPS). Filtration. Morphological profile filters. Scale space techniques
BS EN 13121-3:2008 BS EN 13121-3:2008. GRP tanks and vessels for use above ground. Design and workmanship
DD ISO/TS 22240:2008 DD ISO/TS 22240:2008. Road vehicles. Vehicles safety information model (VSIM)
BS EN 15550:2007 BS EN 15550:2007. Animal feeding stuffs. Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion
BS EN 263:2008 BS EN 263:2008. Sanitary appliances. Crosslinked cast acrylic sheets for baths and shower trays for domestic purposes
BS ISO 18132-2:2008 BS ISO 18132-2:2008. Refrigerated light hydrocarbon fluids. General requirements for automatic level gauges. Gauges in refrigerated-type shore tanks
PD CEN/TR 15522-1:2006 PD CEN/TR 15522-1:2006. Oil spill identification. Waterborne petroleum and petroleum products. Sampling
08/30154538 DC 08/30154538 DC. BS ISO 18857-2. Water quality. Determination of selected alkylphenols. Part 2. Determination of alkylphenols, alkylphenol ethoxylates and bisphenol A. Method for non-fil
DD ISO/TS 3669-2:2007 DD ISO/TS 3669-2:2007. Vacuum technology. Bakable flanges. Dimensions of knife-edge flanges
08/30154605 DC 08/30154605 DC. BS ISO 15223-2. Medical devices. Symbols to be used with medical device labels, labelling and information to be supplied. Part 2. Symbol development, selection and valid
BS ISO 16367:2008 BS ISO 16367:2008. Tools for pressing. Guide plates. U- and V-blocks
DD CEN/TS 1591-4:2007 DD CEN/TS 1591-4:2007. Flanges and their joints. Design rules for gasketed circular flange connections. Qualification of personnel competency in the assembly of bolted joints fit
BS EN 50378-3-2:2007 BS EN 50378-3-2:2007. Passive components to be used in optical fibre communication systems. Product specifications. Type 4/8 channel CWDM module terminated on IEC 60793-2-50 categ
BS EN 50377-8-2:2007 BS EN 50377-8-2:2007. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Type LSH-APC simplex terminated on IEC
BS EN 50377-6-2:2007 BS EN 50377-6-2:2007. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. SC-RJ single mode terminated on IEC 607
BS EN 50377-8-3:2007 BS EN 50377-8-3:2007. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. LSH-PC simplex terminated on IEC 60793-
BS EN 50377-8-4:2007 BS EN 50377-8-4:2007. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. LSH-APC simplex terminated on IEC 60793
BS ISO 20481:2008 BS ISO 20481:2008. Coffee and coffee products. Determination of the caffeine content using high performance liquid chromatography (HPLC). Reference method
BS EN 61290-7-1:2007 BS EN 61290-7-1:2007. Optical amplifiers. Test methods. Out-of-band insertion losses. Filtered optical power meter method
BS EN 61291-2:2007 BS EN 61291-2:2007. Optical amplifiers. Digital applications. Performance specification template
BS EN 196-7:2007 BS EN 196-7:2007. Methods of testing cement. Methods of taking and preparing samples of cement
08/30154948 DC 08/30154948 DC. BS ISO 21809-4. Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems. Part 4. Polyethylene c
BS 8494:2007 BS 8494:2007. Electronic portable and transportable apparatus designed to detect and measure carbon dioxide in indoor ambient air. Requirements and test methods
BS EN 50377-8-5:2007 BS EN 50377-8-5:2007. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. LSH-PC simplex terminated on IEC 60793-
BS EN 50377-8-6:2007 BS EN 50377-8-6:2007. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. LSH-HR simplex terminated on IEC 60793-
BS EN 50377-8-7:2007 BS EN 50377-8-7:2007. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. LSH-PC terminated on IEC 60793-2-50 cat
BS EN 50377-8-8:2007 BS EN 50377-8-8:2007. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. LSH-APC simplex terminated on IEC 60793
BS EN 15330-2:2008 BS EN 15330-2:2008. Surfaces for sports areas. Synthetic turf and needle- punched surfaces primarily designed for outdoor use. Specification for needle-punched surfaces
BS EN 3298:2008 BS EN 3298:2008. Aerospace series. Inserts, thin wall, self-locking. Installation and removal procedure
BS ISO 12043:2007 BS ISO 12043:2007. Rolling bearings. Single-row cylindrical roller bearings. Chamfer dimensions for loose rib and non-rib sides
BS ISO 246:2007 BS ISO 246:2007. Rolling bearings. Cylindrical roller bearings, separate thrust collars. Boundary dimensions
ISO12460-3 : 2008 EDTN1 ISO12460-3 : 2008 EDTN1. ISO 12460-3 Wood-based panels - Determination of formaldehyde release. Part 3: Gas analysis method
ISO12460-4 : 2008 EDTN1 ISO12460-4 : 2008 EDTN1. ISO 12460-4 Wood-based panels - Determination of formaldehyde release. Part 4: Desiccator method
BS 7176:2007 BS 7176:2007. Specification for resistance to ignition of upholstered furniture for non-domestic seating by testing composites
BS EN 61228:2008 BS EN 61228:2008. Fluorescent ultraviolet lamps used for tanning. Measurement and specification method
BS ISO 9058:2008 BS ISO 9058:2008. Glass containers. Standard tolerances for bottles
BS ISO 28000:2007 BS ISO 28000:2007. Specification for security management systems for the supply chain
BS EN 61810-1:2008 BS EN 61810-1:2008. Electromechanical elementary relays. General requirements
08/30155570 DC 08/30155570 DC. BS ISO 7231. Polymeric materials, cellular, flexible Determination of air flow value at constant pressure-drop
BS 7671:2008 BS 7671:2008. Requirements for electrical installations. IEE Wiring Regulations. Seventeenth edition
BS ISO 22960:2008 BS ISO 22960:2008. Titanium and titanium alloys. Determination of iron. Molecular absorption spectrometry using 1, 10- phenanthroline
BS ISO 22961:2008 BS ISO 22961:2008. Titanium and titanium alloys. Determination of iron. Atomic absorption spectrometry
BS ISO 22962:2008 BS ISO 22962:2008. Titanium and titanium alloys. Determination of iron. Inductively coupled plasma atomic emission spectrometry
BS ISO 22963:2008 BS ISO 22963:2008. Titanium and titanium alloys. Determination of oxygen. Infrared method after fusion under inert gas
ISO/IEC 21000-8:2008 (CDROM)HEADER EDTN2 ISO/IEC 21000-8:2008 (CDROM)HEADER EDTN2. ISO/IEC21000-8 : 2008 Information technology. Multimedia framework (MPEG-21). Part 8. Reference Software
ISO/TS22809 : 2007 EDTN1 ISO/TS22809 : 2007 EDTN1. ISO/TS22809 : 2007 Non-destructive testing. Discontinuities in specimens for use in qualification examinations
BS EN 15565:2008 BS EN 15565:2008. Tourism services. Requirements for the provision of professional tourist guide training and qualification programmes
BS EN ISO 27971:2008 BS EN ISO 27971:2008. Cereals and cereal products. Common wheat (Triticum aestivum L.). Determination of alveograph properties of dough at constant hydration from commercial or te
PD 6695-1-9:2008 PD 6695-1-9:2008. Recommendations for the design of structures to BS EN 1993-1-9
DD CEN/TS 14159:2007 DD CEN/TS 14159:2007. Textile floor coverings. Requirements for tolerances on (linear) dimensions of rugs, runners, carpet tiles and wall-to-wall carpet and for tolerances on patt
BS EN ISO 3251:2008 BS EN ISO 3251:2008. Paints, varnishes and plastics. Determination of non- volatile-matter content
BS EN 62379-1:2007 BS EN 62379-1:2007. Common control interface for networked digital audio and video products. General
08/30155823 DC 08/30155823 DC. BS EN ISO 13503-2 AMD1. Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems. Part 2. Measur
BS EN 140401-803:2007 BS EN 140401-803:2007. Detail specification. Fixed low power film SMD resistors. Cylindrical. Stability classes 0,05; 0,1; 0,25; 0,5; 1; 2
BS EN 140401-802:2007 BS EN 140401-802:2007. Detail specification. Fixed low power film SMD resistors. Rectangular. Stability classes 1; 2
BS EN 140401-801:2007 BS EN 140401-801:2007. Detail specification. Fixed low power film SMD resistors. Rectangular. Stability classes 0,1; 0,25; 0,5; 1
BS EN 140100:2008 BS EN 140100:2008. Sectional specification. Fixed low power film resistors
PD CLC/TR 50456:2008 PD CLC/TR 50456:2008. Alarm systems. Guidelines to achieving compliance with EC directives for equipment of alarm systems
BS ISO 28004:2007 BS ISO 28004:2007. Security management systems for the supply chain. Guidelines for the implementation of ISO 28000
BS ISO 10998:2008 BS ISO 10998:2008. Agricultural tractors. Requirements for steering
08/30156013 DC 08/30156013 DC. BS EN ISO 21987. Ophthalmic optics. Mounted spectacle lenses
DD ISO/TS 23081-2:2007 DD ISO/TS 23081-2:2007. Information and documentation. Records management processes. Metadata for records. Conceptual and implementation issues
BIP 2117 BIP 2117. The Waste Electrical and Electronic Equipment Directive. Requirements and implementation
08/30156074 DC 08/30156074 DC. BS EN 1012-3. Compressors and vacuum pumps. Safety requirements. Part 3. Process compressors
BS EN ISO 1248:2008 BS EN ISO 1248:2008. Iron oxide pigments. Specifications and methods of test
BS EN 14682:2007 BS EN 14682:2007. Safety of children's clothing. Cords and drawstrings on children's clothing. Specifications
BS EN 50411-2-3:2007 BS EN 50411-2-3:2007. Fibre organisers and closures to be used in optical fibre communication systems. Product specifications. Sealed inline fibre splice closures Type 1, for cate
BS EN 50378-3-1:2007 BS EN 50378-3-1:2007. Passive components to be used in optical fibre communication systems. Product specifications. Type 100/200 GHz DWDM module terminated on IEC 60793-2-50 categ
BS EN 50377-10-1:2007 BS EN 50377-10-1:2007. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Type MU-PC simplex terminated on IEC
BS EN 50377-8-9:2007 BS EN 50377-8-9:2007. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. LSH-PC simplex terminated on IEC 60793-
BS EN 50464-2-2:2007 BS EN 50464-2-2:2007. Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV. Distribution trans
BS EN 50464-2-3:2007 BS EN 50464-2-3:2007. Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2500 kVA with highest voltage for equipment not exceeding 36 kV. Distribution transf
BS EN 50464-4:2007 BS EN 50464-4:2007. Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2500 kVA with highest voltage for equipment not exceeding 36 kV. Requirements and tests
BS EN 50464-3:2007 BS EN 50464-3:2007. Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2500 kVA with highest voltage for equipment not exceeding 36 kV. Determination of the po
BS EN 50464-2-1:2007 BS EN 50464-2-1:2007. Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2500 kVA with highest voltage for equipment not exceeding 36 kV. Distribution transf
BS 8495:2007 BS 8495:2007. Code of practice for digital CCTV recording systems for the purpose of image export to be used as evidence
08/30156431 DC 08/30156431 DC. BS EN 61804-3 AMD1. Function blocks (FB) for process control. Part 3. Electronic Device Description Language (EDDL)
BS EN 50505:2008 BS EN 50505:2008. Basic standard for the evaluation of human exposure to electromagnetic fields from equipment for resistance welding and allied processes
08/30156451 DC 08/30156451 DC. BS EN ISO 10993-13. Biological evaluation of medical devices. Part 13. Identification and quantification of degradation products from polymeric medical devices
BS EN 62021-2:2007 BS EN 62021-2:2007. Insulating liquids. Determination of acidity. Colourimetric titration
ISO19433 : 2008 EDTN1 ISO19433 : 2008 EDTN1. ISO19433 : 2008 Building construction machinery and equipment. Pedestrian-controlled vibratory plates. Terminology and commercial specifications
ISO19452 : 2008 EDTN1 ISO19452 : 2008 EDTN1. ISO19452 : 2008 Building construction machinery and equipment. Pedestrian-controlled vibratory (percussion) rammers. Terminology and commercial specificati
BS ISO 22197-1:2007 BS ISO 22197-1:2007. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials. Remova
BS EN 15567-1:2007 BS EN 15567-1:2007. Sports and recreational facilities. Ropes courses. Construction and safety requirements
BS EN 15567-2:2007 BS EN 15567-2:2007. Sports and recreational facilities. Ropes courses. Operation requirements
08/30156642 DC 08/30156642 DC. BS ISO 25119-1. Tractors and machinery for agriculture and foresty. Safety-related parts of control systems. Part 1. General principles for design and development
08/30156645 DC 08/30156645 DC. BS ISO 25119-2. Tractors and machinery for agriculture and foresty. Safety-related parts of control systems. Part 2. Concept phase
08/30156648 DC 08/30156648 DC. BS ISO 25119-3. Tractors and machinery for agriculture and foresty. Safety-related parts of control systems. Part 3. Series development, hardware and software
08/30156651 DC 08/30156651 DC. BS ISO 25119-4. Tractors and machinery for agriculture and foresty. Safety-related parts of control systems. Part 4. Production, operation, modification and supporting p
DD 265:2008 DD 265:2008. Protocol for communications between a lift alarm system and an alarm receiving station (rescue centre). Specification
BS EN 60384-11:2008 BS EN 60384-11:2008. Fixed capacitors for use in electronic equipment. Sectional specification. Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors
BS EN 60384-11-1:2008 BS EN 60384-11-1:2008. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed polyethylene- terephthalate film dielectric metal foil d.c. capacitors.
ISO13606-1 : 2008 EDTN1 ISO13606-1 : 2008 EDTN1. Health informatics. Electronic health record communication. Reference model
08/30156909 DC 08/30156909 DC. BS EN 15807. Railway applications. Pneumatic half couplings
BS 437:2008 BS 437:2008. Specification for cast iron drain pipes, fittings and their joints for socketed and socketless systems
08/30157012 DC 08/30157012 DC. BS ISO 28640. Random variate generation methods
BS ISO 4359:1983 BS ISO 4359:1983. Liquid flow measurement in open channels. Rectangular, trapezoidal and U-shaped flumes
BS ISO 23145-1:2007 BS ISO 23145-1:2007. Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of bulk density of ceramic powders. Tap density
BS ISO 4226:2007 BS ISO 4226:2007. Air quality. General aspects. Units of measurement
PD CEN/TR 15367-2:2007 PD CEN/TR 15367-2:2007. Petroleum products. Guide for good housekeeping. Automotive petrol fuels
BS ISO/IEC 7816-2:2007 BS ISO/IEC 7816-2:2007. Identification cards. Integrated circuit cards. Cards with contacts. Dimensions and location of the contacts
BS EN 736-3:2008 BS EN 736-3:2008. Valves. Terminology. Definition of terms
08/30157195 DC 08/30157195 DC. BS EN 15806. Railway application. Braking. Static brake testing
BS EN ISO 21227-2:2006 BS EN ISO 21227-2:2006. Paints and varnishes. Evaluation of defects on coated surfaces using optical imaging. Evaluation procedure for multi-impact stone-chipping test
PD ISO/TR 23462:2007 PD ISO/TR 23462:2007. Space systems. Guidelines to define the management framework for a space project
DD ISO/TS 6733:2006 DD ISO/TS 6733:2006. Milk and milk products. Determination of lead content. Graphite furnace atomic absorption spectrometric method
BS ISO 12637-4:2008 BS ISO 12637-4:2008. Graphic technology. Vocabulary. Postpress terms
DD CLC/TS 50457-1:2008 DD CLC/TS 50457-1:2008. Conductive charging for electric vehicles. D.C. charging station
DD CLC/TS 50457-2:2008 DD CLC/TS 50457-2:2008. Conductive charging for electric vehicles. Communication protocol between off-board charger and electric vehicle
BS EN 50090-5-3:2006 BS EN 50090-5-3:2006. Home and building electronic systems (HBES). Media and media dependent layers. Radio frequency
BS EN ISO 28300:2008 BS EN ISO 28300:2008. Petroleum, petrochemical and natural gas industries. Venting of atmospheric and low-pressure storage tanks
08/30157630 DC 08/30157630 DC. BS ISO 26872. Space systems. Disposal of satellites operating at geosynchronous altitude
BS EN 60670-21:2007 BS EN 60670-21:2007. Boxes and enclosures for electrical accessories for household and similar fixed electrical installations. Particular requirements for boxes and enclosures with
BS EN 50289-4-4:2008 BS EN 50289-4-4:2008. Communication cables. Specifications for test methods. Environmental test methods. Resistance to solvents and contaminating fluids
BS EN 50289-4-5:2008 BS EN 50289-4-5:2008. Communication cables. Specifications for test methods. Environmental test methods. Climatic sequence
BS EN 50289-4-7:2008 BS EN 50289-4-7:2008. Communication cables. Specifications for test methods. Environmental test methods. Damp heat, steady state
PD ISO/TR 27809:2007 PD ISO/TR 27809:2007. Health informatics. Measures for ensuring patient safety of health software
ISO/IEC14496-23 : 2008 EDTN1 ISO/IEC14496-23 : 2008 EDTN1. ISO/IEC14496 : 2008 Information technology - Coding of audio-visual objects. Part 23:Symbolic Music Representation
ISO8894-2 : 2007 EDTN2 ISO8894-2 : 2007 EDTN2. ISO8894-2 : 2007 Refractory materials. Determination of thermal conductivity. Part 2. Hot-wire method (parallel)
BS EN 14985:2007 BS EN 14985:2007. Cranes. Slewing jib cranes
ISO6316 : 2008 EDTN4 ISO6316 : 2008 EDTN4. ISO6316 : 2008 Hot-rolled steel strip of structural quality
ISO6317 : 2008 EDTN3 ISO6317 : 2008 EDTN3. ISO6317 : 2008 Hot-rolled carbon steel strip of commercial and drawing qualities
BS EN ISO 6360-5:2007 BS EN ISO 6360-5:2007. Dentistry. Number coding system for rotary instruments. Specific characteristics of root-canal instruments
BS EN ISO 21078-2:2007 BS EN ISO 21078-2:2007. Determination of boron (III) oxide in refractory products. Acid extraction method for the determination of boron (III) oxide in binder components
08/30158103 DC 08/30158103 DC. BS EN ISO 13666 AMD1. Ophthalmic optics. Spectacle lenses. Vocabulary
BS EN 13606-3:2008 BS EN 13606-3:2008. Health informatics. Electronic health record communication. Reference archetypes and term lists
BS EN 61318:2008 BS EN 61318:2008. Live working. Conformity assessment applicable to tools, devices and equipment
BS EN 140101:2008 BS EN 140101:2008. Blank Detail Specification. Fixed low power film resistors
08/30158227 DC 08/30158227 DC. BS EN ISO 21258. Stationary source emissions. Determination of the mass concentration of dinitrogen monoxide. Reference method. Non-dispersive infrared method
BS ISO 10110-5:2007 BS ISO 10110-5:2007. Optics and photonics. Preparation of drawings for optical elements and systems. Surface form tolerances
ISO22725 : 2007 EDTN1 ISO22725 : 2007 EDTN1. ISO22725 : 2007 Nickel alloys - Determination of tantalum - Inductively coupled plasma atomic emission spectrometric method
BS ISO 10110-14:2007 BS ISO 10110-14:2007. Optics and photonics. Preparation of drawings for optical elements and systems. Wavefront deformation tolerance
BS ISO 9129:2008 BS ISO 9129:2008. Motorcycles. Measurement methods for moments of inertia
BS EN 14886:2008 BS EN 14886:2008. Plastics and rubber machines. Bandknife cutting machines for block foams. Safety requirements
BS ISO 2834-2:2007 BS ISO 2834-2:2007. Graphic technology. Laboratory preparation of test prints. Liquid printing inks
BS EN ISO 21587-3:2007 BS EN ISO 21587-3:2007. Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method). Inductively coupled plasma and atomic absorption
BS 84:2007 BS 84:2007. Parallel screw threads of Whitworth form. Requirements
BS 3643-2:2007 BS 3643-2:2007. ISO metric screw threads. Specification for selected limits of size
BS 1580-3:2007 BS 1580-3:2007. Unified screw threads. Screw threads with diameters below ? in. Requirements
BS EN ISO 10447:2007 BS EN ISO 10447:2007. Resistance welding. Peel and chisel testing of resistance spot and projection welds
BS EN ISO 14373:2007 BS EN ISO 14373:2007. Resistance welding. Procedure for spot welding of uncoated and coated low carbon steels
BS EN 12151:2007 BS EN 12151:2007. Machinery and plants for the preparation of concrete and mortar. Safety requirements
BS EN 15614:2007 BS EN 15614:2007. Protective clothing for firefighters. Laboratory test methods and performance requirements for wildland clothing
BS EN 13971:2008 BS EN 13971:2008. Carbonate liming materials. Determination of reactivity. Potentiometric titration method with hydrochloric acid
BS EN 685:2007 BS EN 685:2007. Resilient, textile and laminate floor coverings. Classification
BS EN 959:2007 BS EN 959:2007. Mountaineering equipment. Rock anchors. Safety requirements and test methods
BS EN 568:2007 BS EN 568:2007. Mountaineering equipment. Ice anchors. Safety requirements and test methods
BS EN569:2007 BS EN569:2007. Mountaineering equipment. Pitons. Safety requirements and test methods
BS EN 12278:2007 BS EN 12278:2007. Mountaineering equipment. Pulleys. Safety requirements and test methods
BS EN 716-1:2008 BS EN 716-1:2008. Furniture. Children's cots and folding cots for domestic use. Safety requirements
DD CEN/TS 15604:2007 DD CEN/TS 15604:2007. Fertilizers. Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen
PD CEN/TR 15592:2007 PD CEN/TR 15592:2007. Health services. Quality management systems. Guide for the use of EN ISO 9004:2000 in health services for performance improvement
BS EN 14353:2007 BS EN 14353:2007. Metal beads and feature profiles for use with gypsum plasterboards. Definitions, requirements and test methods
PD CEN/TR 14520:2007 PD CEN/TR 14520:2007. Packaging. Reuse. Methods for assessing the performance of a reuse system
DD CEN ISO/TS 12180-1:2007 DD CEN ISO/TS 12180-1:2007. Geometrical product specifications (GPS). Cylindricity. Vocabulary and parameters of cylindrical form
DD CEN ISO/TS 12180-2:2007 DD CEN ISO/TS 12180-2:2007. Geometrical product specifications (GPS). Cylindricity. Specification operators
DD CEN ISO/TS 12181-1:2007 DD CEN ISO/TS 12181-1:2007. Geometrical product specifications (GPS). Roundness. Vocabulary and parameters of roundness
DD CEN ISO/TS 12780-2:2007 DD CEN ISO/TS 12780-2:2007. Geometrical product specifications (GPS). Straightness. Specification operators
DD CEN ISO/TS 12781-2:2007 DD CEN ISO/TS 12781-2:2007. Geometrical product specifications (GPS). Flatness. Specification operators
DD CEN ISO/TS 14253-3:2007 DD CEN ISO/TS 14253-3:2007. Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment. Guidelines for achieving agreements on
BS EN 15519:2007 BS EN 15519:2007. Paper and board intended to come into contact with foodstuffs. Preparation of an organic solvent extract
DD CEN/TS 1948-4:2007 DD CEN/TS 1948-4:2007. Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs. Sampling and analysis of dioxin-like PCBs
DD CEN/TS 12390-10:2007 DD CEN/TS 12390-10:2007. Testing hardened concrete. Determination of the relative carbonation resistance of concrete
BS EN 13731:2007 BS EN 13731:2007. Lifting bag systems for fire and rescue service use. Safety and peformance requirements
BS EN 14349:2007 BS EN 14349:2007. Chemical disinfectants and antiseptics. Quantitative surface test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in veter
BS EN ISO 1893:2008 BS EN ISO 1893:2008. Refractory products. Determination of refractoriness under load. Differential method with rising temperature
DD CEN/TS 15621:2007 DD CEN/TS 15621:2007. Animal feeding stuffs. Determination of calcium, sodium, phosphorus, magnesium, potassium, sulphur, iron, zinc, copper, manganese, cobalt and molybdenum afte
PD CEN/TR 15584:2007 PD CEN/TR 15584:2007. Characterisation of sludges. Guide to risk assessment especially in relation to use and disposal of sludges
PD CEN/TR 13445-9:2007 PD CEN/TR 13445-9:2007. Unfired pressure vessels. Conformance of the EN 13445 series to ISO 16528
BS EN 10273:2007 BS EN 10273:2007. Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
BS EN 10106:2007 BS EN 10106:2007. Cold rolled non-oriented electrical steel sheet and strip delivered in the fully processed state
DD CEN/TS 635-4:2007 DD CEN/TS 635-4:2007. Plywood. Classification by surface appearance. Parameters of ability for finishing, guideline
DD CEN/TS 1099:2007 DD CEN/TS 1099:2007. Plywood. Biological durability. Guidance for the assessment of plywood for use in different use classes
DD CEN/TS 12872:2007 DD CEN/TS 12872:2007. Wood-based panels. Guidance on the use of load-bearing boards in floors, walls and roofs
BS EN 3160:2007 BS EN 3160:2007. Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted, solution treated and precipitation treated, bar a or D ≤ 200 mm, Rm ≥ 1310 MPa
BS EN 3161:2007 BS EN 3161:2007. Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted, solution treated and precipitation treated, bar a or D ≤ 200 mm, Rm ≥ 930 MPa
BS EN 3162:2007 BS EN 3162:2007. Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted, solution treated and precipitation treated, sheet and strip a ≤ 6 mm, Rm ≥ 930 MPa
BS EN 3163:2007 BS EN 3163:2007. Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted, softened, forging stock a or D ≤ 300 mm
08/30159214 DC 08/30159214 DC. BS ISO 14715. Oil of thyme containing thymol, Spanish type [Thymus zygis (Loefl.) L.]
BS EN 60229:2008 BS EN 60229:2008. Electric cables. Tests on extruded oversheaths with a special protective function
08/30159296 DC 08/30159296 DC. BS EN ISO 15225. Nomenclature. Specification for a nomenclature system for medical devices for the purpose of regulatory data exchange
BS EN 60216-5:2008 BS EN 60216-5:2008. Electrical insulating materials. Thermal endurance properties. Determination of relative thermal endurance index (RTE) of an insulating material
08/30159339 DC 08/30159339 DC. BS EN 12668-1. Non-destructive testing. Characterization and verification of ultrasonic testing equipment. Part 1. Instruments
08/30159342 DC 08/30159342 DC. BS EN 12668-2. Non-destructive testing. Characterization and verification of ultrasonic examination equipment. Part 2. Probes
BS EN 60255-22-1:2008 BS EN 60255-22-1:2008. Measuring relays and protection equipment. Electrical disturbance tests. 1 MHz burst immunity tests
BS EN ISO 6785:2007 BS EN ISO 6785:2007. Milk and milk products. Detection of Salmonella spp.
08/30159366 DC 08/30159366 DC. BS ISO 26482. Hardmetals. Determination of lead and cadmium
BS EN 1506:2007 BS EN 1506:2007. Ventilation for buildings. Sheet metal air ducts and fittings with circular cross-section. Dimensions
BS EN 61462:2007 BS EN 61462:2007. Composite hollow insulators. Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1000 V. Definitions, test metho
BS ISO 28003:2007 BS ISO 28003:2007. Security management systems for the supply chain. Requirements for bodies providing audit and certification of supply chain security management systems
BS ISO/IEC 15457-3:2008 BS ISO/IEC 15457-3:2008. Identification cards. Thin flexible cards. Test methods
BS EN 3061:2007 BS EN 3061:2007. Aerospace series. Bearings, airframe rolling. Rigid single row ball bearings in corrosion resisting steel, with flanged alignment housing. Dimensions and loads
BS 2975-2:2008 BS 2975-2:2008. Sampling and analysis of glass-making sands. Methods for chemical analysis
DD 61010-100:2007 DD 61010-100:2007. Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for equipment rated for use by children and young
BS EN 62317-13:2008 BS EN 62317-13:2008. Ferrite cores. Dimensions. PQ-cores for use in power supply applications
PD ISO/TR 21707:2008 PD ISO/TR 21707:2008. Intelligent transport systems. Integrated transport information, management and control. Data quality in ITS systems
DD CEN ISO/TS 14823:2008 DD CEN ISO/TS 14823:2008. Traffic and travel information. Messages via media independent stationary dissemination systems. Graphic data dictionary for pre-trip and in-trip inf
08/30159870 DC 08/30159870 DC. BS EN 60800. Heating cables with a rated voltage of 300/500 V for comfort heating and prevention of ice formation
ISO8292-1 : 2008 EDTN1 ISO8292-1 : 2008 EDTN1. ISO8292-1 : 2008 Animal and vegetable fats and oils. Determination of solid fat content by pulsed NMR. Part 1. Direct method
ISO8292-2 : 2008 EDTN1 ISO8292-2 : 2008 EDTN1. ISO8292-2 : 2008 Animal and vegetable fats and oils. Determination of solid fat content by pulsed NMR. Part 2. Indirect method
08/30159958 DC 08/30159958 DC. BS EN 338. Structural timber. Strength classes
PAS 911:2007 PAS 911:2007. Fire strategies - guidance and framework for their formulation
08/30160023 DC 08/30160023 DC. BS EN ISO 21809-5. Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems. Part 5. External co
BS ISO 17564:2008 BS ISO 17564:2008. Raw hydrogenated nitrile rubber (HNBR). Determination of residual unsaturation by iodine value
BS ISO 7781:2008 BS ISO 7781:2008. Styrene-butadiene rubber, raw. Determination of soap and organic-acid content
08/30160045 DC 08/30160045 DC. BS ISO 22006. Quality management systems. Guidelines for the application of ISO 9001:2000 in crop production
BS IEC 61892-3:2007 BS IEC 61892-3:2007. Mobile and fixed offshore units. Electrical installations. Equipment
BS IEC 61892-6:2007 BS IEC 61892-6:2007. Mobile and fixed offshore units. Electrical installations. Installation
BS IEC 61892-7:2007 BS IEC 61892-7:2007. Mobile and fixed offshore units. Electrical installations. Hazardous areas
ISO11699-1 : 2008 EDTN2 ISO11699-1 : 2008 EDTN2. ISO 11699-1 Non-destructive testing - Industrial radiographic film -. Part 1: Classification of film systems for industrial radiography
08/30160325 DC 08/30160325 DC. BS ISO 27547-1. Plastics. Preparation of test specimens of thermoplastic materials using mouldless technologies. Part 1. General principles, and laser-sintering of speci
BS 7273-3:2008 BS 7273-3:2008. Code of practice for the operation of fire protection measures. Electrical actuation of pre-action watermist and sprinkler systems
BS 7273-5:2008 BS 7273-5:2008. Code of practice for the operation of fire protection measures . Electrical actuation of watermist systems (except pre-action systems)
BS EN 14753:2007 BS EN 14753:2007. Safety of machinery. Safety requirements for machinery and equipment for continuous casting of steel
DD IEC/TS 62312-2:2007 DD IEC/TS 62312-2:2007. Guideline for synchronization of audio and video. Methods for synchronization of audio and video systems
BS EN 14648:2007 BS EN 14648:2007. Building hardware. Fittings for shutters. Requirements and test methods
BS EN 13126-7:2007 BS EN 13126-7:2007. Building hardware. Requirements and test methods for windows and door height windows. Finger catches
PD CEN/TR 15623:2008 PD CEN/TR 15623:2008. Food processing machinery. Route map. Materials for food area
BS EN 13915:2007 BS EN 13915:2007. Prefabricated gypsum plasterboard panels with acellular paperboard core. Definitions, requirements and test methods
PD CEN/TR 15628:2007 PD CEN/TR 15628:2007. Maintenance. Qualification of maintenance personnel
BS EN 10272:2007 BS EN 10272:2007. Stainless steel bars for pressure purposes
08/30160532 DC 08/30160532 DC. BS EN 50122-1. Railway applications. Fixed installations. Electrical safety, earthing and bonding. Part 1. Protective provisions against electric shock
BS ISO/IEC 26514:2008 BS ISO/IEC 26514:2008. Software and systems engineering. Requirements for designers and developers of user documentation
08/30160607 DC 08/30160607 DC. BS ISO 26910-1. Springs. Shot peening. Part 1. General procedures
08/30160693 DC 08/30160693 DC. BS EN ISO 13855. Safety of machinery. Positioning of protective equipment with respect to the approach speeds of parts of the human body
BS EN 2624:2007 BS EN 2624:2007. Aerospace series. Pressure impulse testing of hydraulic system components
BS EN 4170:2007 BS EN 4170:2007. Aerospace series. Paints and varnishes. Test method for measurement of resistance to cold crack temperature cycle
BS EN 61161:2007 BS EN 61161:2007. Ultrasonics. Power measurement. Radiation force balances and performance requirements
BS EN ISO 664:2008 BS EN ISO 664:2008. Oilseeds. Reduction of laboratory sample to test sample
PD IEC/TR 62258-7:2007 PD IEC/TR 62258-7:2007. Semiconductor die products. XML schema for data exchange
BS EN 60404-13:2007 BS EN 60404-13:2007. Magnetic materials. Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip
BS EN ISO 3493:2007 BS EN ISO 3493:2007. Vanilla. Vocabulary
BS ISO/IEC 11770-3:2008 BS ISO/IEC 11770-3:2008. Information technology. Security techniques. Key management. Mechanisms using asymmetric techniques
BS EN ISO 19902:2007 BS EN ISO 19902:2007. Petroleum and natural gas industries. Fixed steel offshore structures
BS EN 1007-6:2007 BS EN 1007-6:2007. Advanced technical ceramic. Ceramic composites. Methods of test for reinforcements. Determination of tensile properties of filaments at high temperature
08/30161340 DC 08/30161340 DC. BS EN 60404-8-10. Magnetic materials. Part 8. Specifications for individual materials. Section 1. Specifications for magnetic materials (iron and steel) for use in relay
ISO/IEC23000-7 : 2008 (CDROM) HEADER ED1 ISO/IEC23000-7 : 2008 (CDROM) HEADER ED1. ISO/IEC 23000-7 Information technology - Multimedia application format (MPEG-A). Part 7: Open access application form
ISO/IEC23000-9 : 2008 (CDROM) HEADER ED1 ISO/IEC23000-9 : 2008 (CDROM) HEADER ED1. ISO/IEC 23000-9 Information technology - Multimedia application format (MPEG-A). Part 9: Digital Multimedia Broadcast
08/30161395 DC 08/30161395 DC. BS ISO 25358. Crop protection equipment. Measurement and classification procedure for droplet size spectra from atomisers
08/30161404 DC 08/30161404 DC. BS EN ISO 17672. Brazing. Filler metals
TickIT Guide (5.5) (Hardcopy) TickIT Guide (5.5) (Hardcopy). A Guide to software quality management system construction and certification to ISO 9001:2000
PD ISO/TR 29846:2008 PD ISO/TR 29846:2008. Tyres, valves and tubes. kPa/psi equivalencies for inflation pressures
BS EN 60738-1-1:2008 BS EN 60738-1-1:2008. Thermistors. Directly heated positive step-function temperature coefficient. Blank detail specification. Current limiting application. Assessment level EZ
BS EN 60738-1-2:2008 BS EN 60738-1-2:2008. Thermistors. Directly heated positive step-function temperature coefficient. Blank detail specification. Heating element application. Assessment level EZ
BS EN 60738-1-3:2008 BS EN 60738-1-3:2008. Thermistors. Directly heated positive step-function temperature coefficient. Blank detail specification. Inrush current application. Assessment level EZ
BS EN 60738-1-4:2008 BS EN 60738-1-4:2008. Thermistors. Directly heated positive step-function temperature coefficient. Blank detail specification. Sensing application. Assessment level EZ
BS ISO 28001:2007 BS ISO 28001:2007. Security management systems for the supply chain. Best practices for implementing supply chain security, assessments and plans. Requirements and guidance
BS ISO 20299-3:2008 BS ISO 20299-3:2008. Film for wrapping rubber bales. Ethylene-propylene-diene rubber (EPDM), acrylonitrile- butadiene rubber (NBR), hydrogenated nitrile-butadiene rubber (HNBR), ac
BS EN 14186:2007 BS EN 14186:2007. Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature. Determination of elastic properties by an ultrasonic technique
BS EN 14511-1:2007 BS EN 14511-1:2007. Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling. Terms and definitions
BS EN 14511-2:2007 BS EN 14511-2:2007. Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling. Test conditions
BS EN 14511-4:2007 BS EN 14511-4:2007. Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling. Requirements
BS ISO 8525:2008 BS ISO 8525:2008. Airborne noise emitted by machine tools. Operating conditions for metal-cutting machines
BS ISO 24453:2008 BS ISO 24453:2008. Rubber. Acquisition and presentation of comparable single-point data
BS ISO 24454:2008 BS ISO 24454:2008. Rubber. Acquisition and presentation of comparable multi-point data
08/30161739 DC 08/30161739 DC. BS EN ISO 11771. Air quality. Determination of time-averaged mass emissions and emission factors. General approach
PD CEN/TR 15641:2007 PD CEN/TR 15641:2007. Food analysis. Determination of pesticide residues by LC-MS/MS. Tandem mass spectrometric parameters
DD CEN/TS 15639:2007 DD CEN/TS 15639:2007. Solid recovered fuels.Methods for the determination of mechanical durability of pellets
BS EN 12080:2007 BS EN 12080:2007. Railway applications. Axleboxes. Rolling bearings
BS EN 12081:2007 BS EN 12081:2007. Railway applications. Axleboxes. Lubricating greases
BS EN 12082:2007 BS EN 12082:2007. Railway applications. Axleboxes. Performance testing
PD CEN/TR 15642:2008 PD CEN/TR 15642:2008. Unified tests procedures for the tests of EN 3-7
BS ISO 24213:2008 BS ISO 24213:2008. Metallic materials. Sheet and strip. Method for springback evaluation in stretch bending
BS ISO 13457:2008 BS ISO 13457:2008. Agricultural irrigation equipment. Water-driven chemical injector pumps
BIP 2125:2007 BIP 2125:2007. F is for fire. Dictionary of fire terminology
08/30162037 DC 08/30162037 DC. BS ISO 26909. Springs. Terminology and classification of terms
08/30162045 DC 08/30162045 DC. BS ISO 4080. Rubber and plastics hoses and hose assemblies. Determination of permeability to gas
BS ISO/IEC 38500:2008 BS ISO/IEC 38500:2008. Corporate governance of information technology
08/30162066 DC 08/30162066 DC. BS ISO 7507-4. Petroleum and liquid petroleum products. Calibration of vertical cylindrical tanks. Part 4. Internal electro-optical distance-ranging method
BS ISO 24698-1:2008 BS ISO 24698-1:2008. Rubber, raw. Determination of bound Acrylonitrile content in acrylonitrile-butadiene rubber (NBR). Combustion (Dumas) method
08/30162072 DC 08/30162072 DC. BS EN 62507-1. Requirements for identification systems enabling unambiguous information interchange. Part 1. Principles and methods
BS ISO 24698-2:2008 BS ISO 24698-2:2008. Rubber, raw. Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR). Kjeldahl method
08/30162101 DC 08/30162101 DC. BS ISO 148-1 AMD1. Metallic materials. Charpy pendulum impact test. Part 1. Test method
BS EN 14276-2:2007 BS EN 14276-2:2007. Pressure equipment for refrigerating systems and heat pumps. Piping. General requirements
DD CEN/TS 15658:2007 DD CEN/TS 15658:2007. Advanced technical ceramics. Mechanical properties of ceramic fibres at high temperature under non-reactive environment. Determination of creep behaviour by
08/30162181 DC 08/30162181 DC. BS EN 54-26. Fire detection and fire alarm systems. Part 26. Point fire detectors using carbon monoxide sensors
BS 8497-1:2008 BS 8497-1:2008. Eyewear for protection against intense light sources used on humans and animals for cosmetic and medical applications. Specification for products
BS 8497-2:2008 BS 8497-2:2008. Eyewear for protection against intense light sources used on humans and animals for cosmetic and medical applications. Guidance on use
BS EN 15664-1:2008 BS EN 15664-1:2008. Influence of metallic materials on water intended for human consumption. Dynamic rig test for assessment of metal release. Design and operation
08/30162220 DC 08/30162220 DC. BS EN ISO 1402. Rubber and plastics hoses and hose assemblies. Hydrostatic testing
BS ISO 9276-3:2008 BS ISO 9276-3:2008. Representation of results of particle size analysis. Adjustment of an experimental curve to a reference model
ISO/IEC18051 : 2007 EDTN4 ISO/IEC18051 : 2007 EDTN4. ISO/IEC18051 : 2007 Information technology - Telecommunications and information exchange between systems - Services for Computer Supported Telecomm
BS ISO 2781:2008 BS ISO 2781:2008. Rubber, vulcanized or thermoplastic. Determination of density
ISO19993 : 2007 EDTN1 ISO19993 : 2007 EDTN1. ISO19993 : 2007 Timber structures - Glued laminated timber - Face and edge joint cleavage test
BS ISO 6621-1:2007 BS ISO 6621-1:2007. Internal combustion engines. Piston rings. Vocabulary
08/30162354 DC 08/30162354 DC. BS ISO 24097-1. Using Web Services (machine-machine delivery) for ITS service delivery. Part 1. Realization of interoperable web services
07/30162368 DC 07/30162368 DC. BS IEC 60050-732. International electrotechnical vocabulary. Part 732. Computer network technology
BS ISO 9112:2008 BS ISO 9112:2008. Truck and bus tyres. Methods of measuring tyre rolling circumference. Loaded new tyres
DD IEC/TS 60870-5-604:2007 DD IEC/TS 60870-5-604:2007. Telecontrol equipment and systems. Conformance test cases for the IEC 60870-5-104 companion standard
PD ISO/TR 28980:2007 PD ISO/TR 28980:2007. Ophthalmic optics. Spectacle lenses. Parameters affecting lens power measurement
08/30162505 DC 08/30162505 DC. BS EN 15780. Ventilation for buildings. Ductwork. Cleanliness of ventilation systems
BS EN 50131-2-2:2008 BS EN 50131-2-2:2008. Alarm systems. Intrusion and hold-up systems. Intrusion detectors. Passive infrared detectors
ISO14704 : 2008 EDTN2 ISO14704 : 2008 EDTN2. ISO 14704 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at room temperature
ISO/IEC17343 : 2007 EDTN2 ISO/IEC17343 : 2007 EDTN2. ISO/IEC17343 : 2007 Information technology - Telecommunications and information exchange between systems - Corporate telecommunication networks - S
BS ISO 7743:2008 BS ISO 7743:2008. Rubber, vulcanized or thermoplastic. Determination of compression stress-strain properties
BS EN 50131-2-4:2008 BS EN 50131-2-4:2008. Alarm systems. Intrusion and hold-up systems. Requirements for combined passive infrared and microwave detectors
ISO14705 : 2008 EDTN2 ISO14705 : 2008 EDTN2. ISO 14705 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for hardness of monolithic ceramics at room temperature
BS EN ISO 703:2007 BS EN ISO 703:2007. Conveyor belts. Transverse flexibility (troughability). Test method
DD CLC/TS 50509:2007 DD CLC/TS 50509:2007. Use of LED signal heads in road traffic signal systems
PD IEC/TR 62510:2008 PD IEC/TR 62510:2008. Standardising the characteristics of electricity
PD CLC/TR 50511:2007 PD CLC/TR 50511:2007. Railway applications. Communications, signalling and processing systems. ERTMS/ETCS. External signalling for lines equipped with ERTMS/ETCS Level 2
BS EN 50425:2008 BS EN 50425:2008. Switches for household and similar fixed electrical installations. Collateral standard. Fireman's switches for exterior and interior signs and luminaires
08/30162845 DC 08/30162845 DC. BS ISO 3780. Road vehicles. World manufacturer identifier (WMI) code
BS ISO/IEC 10373-7:2008 BS ISO/IEC 10373-7:2008. Identification cards. Test methods. Vicinity cards
DD IEC/PAS 62344:2007 DD IEC/PAS 62344:2007. General guidelines for the design of ground electrodes for high-voltage direct current (HVDC) links (NPPAS)
BS EN ISO 8748:2007 BS EN ISO 8748:2007. Spring-type straight pins. Coiled, heavy duty
08/30163012 DC 08/30163012 DC. BS ISO 7176-21. Wheelchairs. Part 21. Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and scooters, and battery chang
BS EN 12464-2:2007 BS EN 12464-2:2007. Lighting of work places. Outdoor work places
BS EN 61937-9:2007 BS EN 61937-9:2007. Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958. Non-linear PCM bitstreams according to the MAT format
BS EN 14123:2007 BS EN 14123:2007. Foodstuffs. Determination of aflatoxin B1 and the sum of aflatoxin B1, B2, G1 and G2 in hazelnuts, peanuts, pistachios, figs, and paprika powder. High performance li
08/30163094 DC 08/30163094 DC. BS EN ISO 286-2 AMD 1. ISO system of limits and fits. Part 2. Tables of standard tolerance grades and limit deviations for holes and shafts
DD IEC/TS 62257-7:2008 DD IEC/TS 62257-7:2008. Recommendations for small renewable energy and hybrid systems for rural hybrid systems for rural electrification. Generators
DD IEC/TS 62257-7-3:2008 DD IEC/TS 62257-7-3:2008. Recommendations for small renewable energy and hybrid systems for rural electrification. Generator set. Selection of generator sets for rural electri
BS 7000-2:2008 BS 7000-2:2008. Design management systems. Guide to managing the design of manufactured products
BS 7000-10:2008 BS 7000-10:2008. Design management systems. Vocabulary of terms used in design management
BS ISO 26402:2008 BS ISO 26402:2008. Agricultural vehicles. Steering systems for agricultural trailers. Interface for articulated steering device of semi-mounted trailers
BS EN ISO 13287:2007 BS EN ISO 13287:2007. Personal protective equipment. Footwear. Test method for slip resistance
PAS 88:2008 PAS 88:2008. Guidance on accessibility of large hotel premises and hotel chains
BS EN 13161:2008 BS EN 13161:2008. Natural stone test methods. Determination of flexural strength under constant moment
BS EN 13755:2008 BS EN 13755:2008. Natural stone test methods. Determination of water absorption at atmospheric pressure
BS ISO 6626-3:2008 BS ISO 6626-3:2008. Internal combustion engines. Piston rings. Coil-spring-loaded oil control rings made of steel
08/30163333 DC 08/30163333 DC. BS IEC 61500. Nuclear power plants. Instrumentation and control important to safety. Data communication
NA to BS EN 1991-1-6:2005 NA to BS EN 1991-1-6:2005. UK National Annex to Eurocode 1. Actions on structures. General actions. Actions during execution
BS 7861-1:2007 BS 7861-1:2007. Strata reinforcement support system components used in coal mines. Specification for rockbolting
BS 1192:2007 BS 1192:2007. Collaborative production of architectural, engineering and construction information. Code of practice
BS EN 13274-7:2008 BS EN 13274-7:2008. Respiratory protective devices. Methods of test. Determination of particle filter penetration
BS EN 1036-2:2008 BS EN 1036-2:2008. Glass in building. Mirrors from silver-coated float glass for internal use. Evaluation of conformity; product standard
DD CEN/TS 15676:2007 DD CEN/TS 15676:2007. Wood flooring. Slip resistance. Pendulum test
DD CEN/TS 15679:2007 DD CEN/TS 15679:2007. Thermal modified timber. Definitions and characteristics
BS EN 14164:2008 BS EN 14164:2008. Foodstuffs. Determination of vitamin B6 by HPLC
BS EN 1440:2008 BS EN 1440:2008. LPG equipment and accessories. Periodic inspection of transportable refillable LPG cylinders
BS EN 1439:2008 BS EN 1439:2008. LPG equipment and accessories. Procedure for checking LPG cylinders before, during and after filling
BS ISO/IEC 7816-4:2005+A1:2008 BS ISO/IEC 7816-4:2005+A1:2008. Identification cards. Integrated circuit cards. Organization, security and commands for interchange
08/30163745 DC 08/30163745 DC. BS EN 12561-2. Railway applications. Tank wagons. Part 2. Bottom emptying devices for liquid products including vapour return
BS EN 50377-3-1:2008 BS EN 50377-3-1:2008. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Type SG terminated on IEC 60793-2-10 ca
BS 939:2007 BS 939:2007. Engineers' squares (including cylindrical and block squares). Specification
08/30163829 DC 08/30163829 DC. BS EN 1076. Workplace exposure. Procedures for measuring gases and vapours using pumped samplers. Requirements and test methods
08/30163839 DC 08/30163839 DC. BS EN 13890. Workplace exposure. Procedures for measuring metals and metalloids in airborne particles. Requirements and test methods
PD 6696-2:2007 PD 6696-2:2007. Background paper to BS EN 1994-2 and the UK National Annex to BS EN 1994-2. Eurocode 4. Design of composite steel and concrete structures. General rules and rules for br
BS ISO/IEC 7816-15:2004+A2:2008 BS ISO/IEC 7816-15:2004+A2:2008. Identification cards. Integrated circuit cards. Cryptographic information application
DD CEN/TS 15675:2007 DD CEN/TS 15675:2007. Air quality. Measurement of stationary source emissions. Application of EN ISO/IEC 17025:2005 to periodic measurements
DD CEN/TS 15674:2007 DD CEN/TS 15674:2007. Air quality. Measurement of stationary source emissions. Guidelines for the elaboration of standardised methods
BS EN 716-2:2008 BS EN 716-2:2008. Furniture. Children's cots and folding cots for domestic use. Test methods
BS EN 12953-9:2007 BS EN 12953-9:2007. Shell boilers. Requirements for limiting devices of the boiler and accessories
ISO14703 : 2008 EDTN2 ISO14703 : 2008 EDTN2. ISO14703 : 2008 Fine ceramics (advanced ceramics, advanced technical ceramics). Sample preparation for the determination of particle size distribution of c
BS ISO 15490:2008 BS ISO 15490:2008. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for tensile strength of monolithic ceramics at room temperature
ISO15490 : 2008 EDTN2 ISO15490 : 2008 EDTN2. ISO15490 : 2008 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for tensile strength of monolithic ceramics at room temperature
BS ISO 23909:2008 BS ISO 23909:2008. Soil quality. Preparation of laboratory samples from large samples
08/30164047 DC 08/30164047 DC. BS ISO 14813-5. Transport information and control systems. Reference model architecture(s) for the TICS sector. Part 5. Requirements for architecture description in TICS
BS EN ISO 20795-1:2008 BS EN ISO 20795-1:2008. Dentistry. Base polymers. Denture base polymers
PD 6687-2:2008 PD 6687-2:2008. Recommendations for the design of structures to BS EN 1992-2:2005
08/30164186 DC 08/30164186 DC. BS ISO 5173. Destructive tests on welds in metallic materials. Bend tests
PD ISO/TR 25104:2008 PD ISO/TR 25104:2008. Intelligent transport systems. System architecture, taxonomy, terminology and data modelling. Training requirements for ITS architecture
PD CEN/TR 15678:2008 PD CEN/TR 15678:2008. Concrete. Release of regulated dangerous substances into soil, groundwater and surface water. Test method for new or unapproved constituents of concrete and
DD CEN/TS 15680:2007 DD CEN/TS 15680:2007. Prefabricated timber stairs. Mechanical test methods
BS EN 12193:2007 BS EN 12193:2007. Light and lighting. Sports lighting
BS EN ISO 16720:2007 BS EN ISO 16720:2007. Soil quality. Pretreatment of samples by freeze-drying for subsequent analysis
BS ISO 5600:2007 BS ISO 5600:2007. Rubber. Determination of adhesion to rigid materials using conical shaped parts
BS ISO 2007:2007 BS ISO 2007:2007. Rubber, unvulcanized. Determination of plasticity. Rapid-plastimeter method
BS 7000-1:2008 BS 7000-1:2008. Design management systems. Guide to managing innovation
08/30164296 DC 08/30164296 DC. BS EN ISO 10497. Testing of valves. Fire type-testing requirements
BS ISO 5950:2008 BS ISO 5950:2008. Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities
PD IEC/TR 61000-3-6:2008 PD IEC/TR 61000-3-6:2008. Electromagnetic compatibility (EMC). Limits. Assessment of emission limits for the connection of distorting installations to MV, HV and EHV power sys
BS EN 14256:2007 BS EN 14256:2007. Adhesives for non-structural wood applications. Test method and requirements for resistance to static load
PD CLC/TR 50510:2007 PD CLC/TR 50510:2007. Fibre optic access to end-user. A guideline to building of FTTX fibre optic network
BS ISO 814:2007 BS ISO 814:2007. Rubber, vulcanized or thermoplastic. Determination of adhesion to metal. Two-plate method
BS ISO 9026:2007 BS ISO 9026:2007. Raw rubber or unvulcanized compounds. Determination of green strength
BS ISO 5603:2007 BS ISO 5603:2007. Rubber, vulcanized. Determination of adhesion to wire cord
BS ISO 10295-1:2007 BS ISO 10295-1:2007. Fire tests for building elements and components. Fire testing of service installations. Penetration seals
OHSAS 18001:2007 OHSAS 18001:2007. OHSAS18001 Occupational health and safety management systems. Requirements
BS ISO 2285:2007 BS ISO 2285:2007. Rubber, vulcanized or thermoplastic. Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
BS ISO 1827:2007 BS ISO 1827:2007. Rubber, vulcanized or thermoplastic. Determination of shear modulus and adhesion to rigid plates. Quadruple-shear methods
08/30164750 DC 08/30164750 DC. BS EN 993-14. Methods of testing insulating and dense shaped refractory products. Part 14. Determination of thermal conductivity by the hot wire (cross-array) and resist
PD CEN/TR 15645-1:2008 PD CEN/TR 15645-1:2008. Paper and board intended to come into contact with foodstuffs. Calibration of the off-flavour test. Odour
PD CEN/TR 15645-2:2008 PD CEN/TR 15645-2:2008. Paper and board intended to come into contact with foodstuffs. Calibration of the off-flavour test. Fatty food
PD CEN/TR 15645-3:2008 PD CEN/TR 15645-3:2008. Paper and board intended to come into contact with foodstuffs. Calibration of the off-flavour test. Dry food
PD CEN/TR 15697:2008 PD CEN/TR 15697:2008. Cement. Performance testing for sulfate resistance. State of the art report
08/30164856 DC 08/30164856 DC. BS ISO 3664. Graphic technology and photography. Viewing conditions
PD CEN/TR 15473:2007 PD CEN/TR 15473:2007. Characterization of sludges. Good practice for sludgesdrying
BS ISO 633:2007 BS ISO 633:2007. Cork. Vocabulary
08/30164917 DC 08/30164917 DC. BS EN 12504-1. Testing concrete in structures. Part 1. Cored specimens. Taking, examining and testing in compression
BS ISO 34-2:2007 BS ISO 34-2:2007. Rubber, vulcanized or thermoplastic. Determination of tear strength. Small (Delft) test pieces
08/30165015 DC 08/30165015 DC. BS ISO 28017. Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications. Specification
08/30165041 DC 08/30165041 DC. BS ISO 28078-1. Plastics. Poly(phenylene sulfide) (PPS) moulding and extrusion materials. Part 1. Designation system and basis for specifications
08/30165044 DC 08/30165044 DC. BS ISO 28078-2. Plastics. Poly(phenylene sulfide) (PPS) moulding and extrusion materials. Part 2. Preparation of test specimens and determination of properties
08/30165047 DC 08/30165047 DC. BS EN ISO 9906. Rotodynamic pumps. Hydraulic performance acceptance tests
08/30165177 DC 08/30165177 DC. BS ISO 15472 AMD1. Surface chemical analysis. X-ray photoelectron spectrometers. Calibration of energy scales
ISO23146 : 2008 EDTN1 ISO23146 : 2008 EDTN1. ISO23146 : 2008 Fine ceramics (advanced ceramics, advanced technical ceramics). Test methods for fracture toughness of monolithic ceramics. Single-edge V-n
BS ISO 13985:2006 BS ISO 13985:2006. Liquid hydrogen. Land vehicle fuel tanks
BS EN 60255-22-2:2008 BS EN 60255-22-2:2008. Measuring relays and protection equipment. Electrical disturbance tests. Electrostatic discharge tests
BS EN 60255-22-4:2008 BS EN 60255-22-4:2008. Measuring relays and protection equipment. Electrical disturbance tests. Electrical fast transient/burst immunity test
08/30165230 DC 08/30165230 DC. BS ISO 29945. Refrigerated non-petroleum-based liquefied gaseous fuels. Di-methyl ether (DME). Method of manual sampling on shore terminals
BS EN 993-11:2007 BS EN 993-11:2007. Methods of test for dense shaped refractory products. Determination of resistance to thermal shock
BS EN 15430-1:2007 BS EN 15430-1:2007. Winter and road service area maintenance equipments. Data acquisition and transmission. In vehicle data acquisition
07/30165274 DC 07/30165274 DC. BS EN 61076-2-106. Connectors for electronic equipment. Product requirements. Part 2-106. Circular connectors. Detail specification for circular connectors M16x0,75 with
08/30165284 DC 08/30165284 DC. BS ISO 10936-2. Optics and photonics. Operation microscopes. Part 2. Light hazard from operation microscopes used in ocular surgery
BIP 0064:2007 BIP 0064:2007. Information security incident management. A methodology
DD CEN/TS 15506:2007 DD CEN/TS 15506:2007. Foodstuffs. Determination of trace elements. Determination of tin in fruit and vegetables preserved in cans by flame atomic absorption spectrometry (AAS)
PAS 43:2008 PAS 43:2008. Safe working of vehicle breakdown, recovery and removal operations. Management system specification
ISO22307 : 2008 EDTN1 ISO22307 : 2008 EDTN1. ISO22307 : 2008 Financial services industry. Privacy impact assessment
BIP 0090:2008 BIP 0090:2008. Web accessibility. Making PAS 78 work
BIP 0027:2007 BIP 0027:2007. Moving to Mobility. Creating a Successful Remote Work Environment
BIP 0020:2008 BIP 0020:2008. Securing Email and Electronic Messages
08/30165463 DC 08/30165463 DC. BS EN 50122-2. Railway applications. Fixed installations. Electrical safety, earthing and bonding. Part 2. Provisions against the effects of stray currents caused by D.C
BS ISO 4217:2008 BS ISO 4217:2008. Codes for the representation of currencies and funds
08/30165493 DC 08/30165493 DC. BS EN ISO 10426-1. Petroleum and natural gas industries. Cements and materials for well cementing. Part 1. Specification
BS EN 1548:2007 BS EN 1548:2007. Flexible sheets for waterproofing. Plastic and rubber sheets for roof waterproofing. Method for exposure to bitumen
DD IEC/TS 61251:2008 DD IEC/TS 61251:2008. Electrical insulating materials. A.C. voltage endurance evaluation. Introduction
ISO10675-1 : 2008 EDTN1 ISO10675-1 : 2008 EDTN1. ISO10675-1 : 2008 Non-destructive testing of welds. Accepetance levels for radiographic testing. Part 1. Steel, nickel, titanium and their alloys
BS EN 12493:2008 BS EN 12493:2008. LPG equipment and accessories. Welded steel tanks for liquefied petroleum gas (LPG). Road tankers design and manufacture
DD IEC/PAS 62473:2007 DD IEC/PAS 62473:2007. Clothes washing machines for household use. Methods for measuring the mechanical action in household washing machines
BS ISO 20858:2007 BS ISO 20858:2007. Ships and marine technology. Maritime port facility security assessments and security plan development
BS IEC 60092-503:2007 BS IEC 60092-503:2007. Electrical installations in ships. Special features. AC supply systems with voltages in the range of above 1 kV up to and including 15 kV
BS ISO 27027:2008 BS ISO 27027:2008. Aerospace. Solid-state remote power controllers. General performance requirements
08/30165680 DC 08/30165680 DC. BS EN 15856. Non-destructive testing. Acoustic emission. General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid
BIP 0096:2007 BIP 0096:2007. ITIL version 3. Official introduction to the ITIL service lifecycle
BIP 0095:2007 BIP 0095:2007. ITIL version 3. Service transition
BIP 0094:2007 BIP 0094:2007. ITIL version 3. Service strategy
BIP 0093:2007 BIP 0093:2007. ITIL version 3. Service operation
08/30165724 DC 08/30165724 DC. BS EN ISO 3506-1. Mechanical properties of corrosion- resistant stainless-steel fasteners. Part 1. Bolts, screws and studs
BIP 0092:2007 BIP 0092:2007. ITIL version 3. Service design
BIP 0091:2007 BIP 0091:2007. ITIL version 3. Continual service improvement
08/30165729 DC 08/30165729 DC. BS EN ISO 3506-2. Mechanical properties of corrosion-resistant stainless steel fasteners. Part 2. Nuts
08/30165732 DC 08/30165732 DC. BS EN ISO 3506-3. Mechanical properties of corrosion- resistant stainless steel fasteners. Part 3. Set screws and similar fasteners not under tensile stress
08/30165735 DC 08/30165735 DC. BS EN ISO 3506-4. Mechanical properties of corrosion- resistant stainless steel fasteners. Part 4. Tapping screws
BS EN ISO 4264:2007, BS 2000-380:2007 BS EN ISO 4264:2007, BS 2000-380:2007. Petroleum products. Calculation of cetane index of middle-distillate fuels by the four-variable equation
ISO29470 : 2008 EDTN1 ISO29470 : 2008 EDTN1. ISO29470 : 2008 Thermal insulating products for building applications - Determination of the apparent density
ISO/IEC18000-3 : 2008 EDTN2 ISO/IEC18000-3 : 2008 EDTN2. ISO/IEC18000-3 : 2008 Information technology. Radio frequency identification for item management. Part 3. Parameters for air interface communic
08/30165875 DC 08/30165875 DC. BS ISO/IEC 18000-6. Information technology. Radio frequency identification for item management. Part 6. Parameters for air interface communications at 860 MHz to 960 MHz
08/30165924 DC 08/30165924 DC. BS ISO 24095. Workplace air. Guidance for the measurement of respirable crystalline silica
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
