BIS Standards Catalogue
PP 8888-2:2001 (Pack of 5) PP 8888-2:2001 (Pack of 5). Engineering drawing practice. Part 2: A guide for higher education to BS 8888:2000. Technical product documentation
BS EN 61249-2-8:2003 BS EN 61249-2-8:2003. Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad. Reinforced base materials clad and uncl
BS EN 61249-2-9:2003 BS EN 61249-2-9:2003. Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad. Reinforced base materials clad and uncl
BS EN 14161:2003 BS EN 14161:2003. Petroleum and natural gas industries. Pipeline transportation systems
DD ENV 1993-1-2:2001 DD ENV 1993-1-2:2001. Eurocode 3. Design of steel structures. General rules. Structural fire design (together with United Kingdom National Application Document)
BS EN 61249-2-21:2003 BS EN 61249-2-21:2003. Materials for printed boards and other interconnecting structures. Reinforced base materials, clad and unclad. Non-halogenated epoxide woven E-glass reinfo
BS EN ISO 9333:2006 BS EN ISO 9333:2006. Dentistry. Brazing materials
BS EN 60230:2002 BS EN 60230:2002. Impulse tests on cables and their accessories
BS EN ISO 22374:2005 BS EN ISO 22374:2005. Dentistry. Dental handpieces. Electrical-powered scalers and scaler tips
BS ISO/IEC 8652:1995 BS ISO/IEC 8652:1995. Programming languages. Ada
BS ISO/TS 13725:2001 BS ISO/TS 13725:2001. Hydraulic fluid power. Cylinders. Method for determining the buckling load
BS ISO 10300-2:2001 BS ISO 10300-2:2001. Calculation of load capacity of bevel gears. Calculation of surface durability (pitting)
BS EN 13061:2001 BS EN 13061:2001. Protective clothing. Shin guards for association football players. Requirements and test methods
BS ISO 15368:2001 BS ISO 15368:2001. Optics and optical instruments. Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
BS ISO 16269-6:2005 BS ISO 16269-6:2005. Statistical interpretation of data. Determination of statistical tolerance intervals
PD IEC/PAS 62276:2002 PD IEC/PAS 62276:2002. Single crystal wafers applied for surface acoustic wave device. Specification and measuring method
PD IEC/PAS 62277:2002, IEC/PAS 62277:2001 PD IEC/PAS 62277:2002, IEC/PAS 62277:2001. Test-fixture of surface mounting quartz crystal units
BS EN 771-6:2005 BS EN 771-6:2005. Specification for masonry units. Natural stone masonry units
BS EN 61280-1-4:2003 BS EN 61280-1-4:2003. Fibre optic communication subsystem basic test procedures. Test procedures for general communication subsystems. Collection and reduction of two-dimensional
ISO2896 : 2001 EDTN 3 ISO2896 : 2001 EDTN 3. ISO2896 : 2001 Rigid cellular plastics- Determination of water absorption
BS EN 61290-10-3:2003 BS EN 61290-10-3:2003. Optical amplifiers. Test methods. Multichannel parameters. Probe methods
BS EN 61290-11-1:2003 BS EN 61290-11-1:2003. Optical fibre amplifiers. Basic specification. Polarization mode dispersion. Jones matrix eigenanalysis method (JME)
BS EN 62148-10:2003 BS EN 62148-10:2003. Fibre optic active components and devices. Package and interface standards. SFF MU duplex 20-pin transceivers
BS EN 62148-7:2003 BS EN 62148-7:2003. Fibre optic active components and devices. Package and interface standards. SFF LC 10-pin transceivers
BS EN 62148-8:2003 BS EN 62148-8:2003. Fibre optic active components and devices. Package and interface standards. SFF LC 20-pin transceivers
BS EN 62148-9:2003 BS EN 62148-9:2003. Fibre optic active components and devices. Package and interface standards. SFF MU duplex 10-pin transceivers
BS EN 62149-4:2003 BS EN 62149-4:2003. Fibre optic active components and devices. Performance standards. 1300 nm fibre optic transceivers for Gigabit Ethernet application
BS ISO 10300-3:2001 BS ISO 10300-3:2001. Calculation of load capacity of bevel gears. Calculation of tooth root strength
EP 230 EP 230. BSI Electronic Book. Disability Access (BS 8300:2001) CD-ROM. (BS 8300:2001 as amended 2005 is only available in hard copy. New updated CD will be available Autumn 2005)
PD ISO/TS 16431:2002 PD ISO/TS 16431:2002. Hydraulic fluid power. Assembled systems. Verification of cleanliness
BS ISO/TR 14179-2:2001 BS ISO/TR 14179-2:2001. Gears. Thermal capacity. Thermal load carrying capacity
BS ISO 9083:2001 BS ISO 9083:2001. Calculation of load capacity of spur and helical gears. Application to marine gears
BS ISO/TR 14179-1:2001 BS ISO/TR 14179-1:2001. Gears. Thermal capacity. Rating gear drives with thermal equilibrium at 95°C sump temperature
ISO11898-1 : 2003 EDTN 1 ISO11898-1 : 2003 EDTN 1. ISO11898-1 : 2003 Road vehicles - Controller area network (CAN). Part 1: Data link layer and physical signalling
ISO11898-2 : 2003 EDTN 1 ISO11898-2 : 2003 EDTN 1. ISO11898-2 : 2003 Road vehicles - Controller area network (CAN). Part 2: High-speed medium access unit
BS EN 1804-1:2001 BS EN 1804-1:2001. Machines for underground mines. Safety requirements for hydraulic powered roof supports. Support units and general requirements
BS EN 1804-2:2001 BS EN 1804-2:2001. Machines for underground mines. Safety requirements for hydraulic powered roof supports. Power set legs and rams
BS ISO 6497:2002 BS ISO 6497:2002. Animal feeding stuffs. Sampling
BS 8504-1:2006 BS 8504-1:2006. Beach safety flags. Colour, shape and meaning
BS ISO 18928:2002 BS ISO 18928:2002. Imaging materials. Unprocessed photographic films and papers. Storage practices
BS EN 1297:2004 BS EN 1297:2004. Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Method of artificial ageing by long term exposure to the combination of U
BS ISO 17724:2003 BS ISO 17724:2003. Graphical symbols. Vocabulary
BS ISO 12006-2:2001 BS ISO 12006-2:2001. Building construction. Organization of information about construction works. Framework for classification of information
BS 5852:2006 BS 5852:2006. Methods of test for assessment of the ignitability of upholstered seating by smouldering and flaming ignition sources
BS EN 161:2002 BS EN 161:2002. Automatic shut-off valves for gas burners and gas appliances
WD/ISO/IEC9594-1 : 2001 EDTN 4 WD/ISO/IEC9594-1 : 2001 EDTN 4. ISO/IEC 9594-1 : 2002 Information technology- Open Systems interconnection- The Directory: Overview of concepts, models and services
ISO/IEC9594-2 : 2001 EDTN2 ISO/IEC9594-2 : 2001 EDTN2. ISO/IEC 9594-2 Information technology- Open Systems Interconnection- The Directory: Models
ISO/IEC9594-3 : 2001 EDTN4 ISO/IEC9594-3 : 2001 EDTN4. ISO/IEC9594-3 : 2002 Information technology - Open Systems Interconnection- The Directory: Abstract service definition
BS EN 10263-2:2001 BS EN 10263-2:2001. Steel rod, bars and wire for cold heading and cold extrusion. Technical delivery conditions for steels not intended for heat treatment after cold working
BS EN 10263-3:2001 BS EN 10263-3:2001. Steel rod, bars and wire for cold heading and cold extrusion. Technical delivery conditions for case hardening steels
ISO/IEC9594-4 : 2001 EDTN 4 ISO/IEC9594-4 : 2001 EDTN 4. ISO/IEC9594-4 : 2001 Information technology- Open Systems Interconnection- The Directory: Procedures for distributed operation
BS EN 10263-5:2001 BS EN 10263-5:2001. Steel rod, bars and wire for cold heading and cold extrusion. Technical delivery conditions for stainless steels
BS ISO 15373:2001 BS ISO 15373:2001. Plastics. Polymer dispersions. Determination of free formaldehyde
ISO13849-2 : 2003 EDTN 1 ISO13849-2 : 2003 EDTN 1. ISO13849-2 : 2003 Safety of machinery- Safety-related parts of control system. Part 2: Validation
BS EN 13294:2002 BS EN 13294:2002. Products and systems for the protection and repair of concrete structures. Test methods. Determination of stiffening time
BS EN 13395-1:2002 BS EN 13395-1:2002. Products and systems for the protection and repair of concrete structures. Test methods. Determination of workability. Test for flow of thixotropic mortars
BS EN 13395-2:2002 BS EN 13395-2:2002. Products and systems for the protection and repair of concrete structures. Test methods. Determination of workability. Test for flow of grout or mortar
BS EN 13395-3:2002 BS EN 13395-3:2002. Products and systems for the protection and repair of concrete structures. Test methods. Determination of workability. Test for flow of repair concrete
DD ISO/TS 21748:2004 DD ISO/TS 21748:2004. Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation
DD ISO/TS 21749:2005 DD ISO/TS 21749:2005. Measurement and uncertainty for metrological applications. Repeated measurements and nested experiments
BS EN 50153:2002 BS EN 50153:2002. Railway applications. Rolling stock. Protective provisions relating to electrical hazards
BS EN 13486:2002 BS EN 13486:2002. Temperature recorders and thermometers for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream. Periodic verifica
KIT 91 KIT 91. Space project management. General requirements
BS EN 10244-2:2001 BS EN 10244-2:2001. Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Zinc or zinc alloy coatings
BS EN ISO 15749-1:2004 BS EN ISO 15749-1:2004. Ships and marine technology. Drainage systems on ships and marine structures. Sanitary drainage-system design
PD 6680:2002 PD 6680:2002. Guidance on the new European Standards for thermal insulation materials
BS EN 12004:2001 BS EN 12004:2001. Adhesives for tiles. Definitions and specifications
BS EN 61300-2-47:2004 BS EN 61300-2-47:2004. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Thermal shocks
KIT 92 KIT 92. Safety of machinery. Permanent means of access to machinery
BS 3936-4:2007 BS 3936-4:2007. Nursery stock. Specification for forest trees, poplars and willows
BS 6465-1:2006 BS 6465-1:2006. Sanitary installations. Code of practice for the design of sanitary facilities and scales of provision of sanitary and associated appliances
BS EN 50050:2001 BS EN 50050:2001. Electrical apparatus for potentially explosive atmospheres. Electrostatic hand-held spraying equipment
BS EN 13506:2002, BS 6068-2.74:2002 BS EN 13506:2002, BS 6068-2.74:2002. Water quality. Determination of mercury by atomic fluorescence spectrometry
BS EN 1186-11:2002 BS EN 1186-11:2002. Materials and articles in contact with foodstuffs. Plastics. Test methods for overall migration into mixtures of C-labelled synthetic triglycerides
BS EN 1186-10:2002 BS EN 1186-10:2002. Materials and articles in contact with foodstuffs. Plastics. Test methods for overall migration into olive oil (modified method for use in cases where incomplete
BS EN 13484:2002 BS EN 13484:2002. Helmets for users of luges
BS EN 1186-15:2002 BS EN 1186-15:2002. Materials and articles in contact with foodstuffs. Plastics. Alternative test methods to migration into fatty food simulants by rapid extraction into iso-octane
BS ISO 13528:2005 BS ISO 13528:2005. Statistical methods for use in proficiency testing by interlaboratory comparisons
BS EN 1186-13:2002 BS EN 1186-13:2002. Materials and articles in contact with foodstuffs. Plastics. Test methods for overall migration at high temperatures
BS EN 1186-14:2002 BS EN 1186-14:2002. Materials and articles in contact with foodstuffs. Plastics. Test methods for 'substitute tests' for overall migration from plastics intended to come into contac
DD ENV 302-5:2002 DD ENV 302-5:2002. Adhesives for load-bearing timber structures. Test tethods. Determination of the conventional assembly time
BS EN 1443:2003 BS EN 1443:2003. Chimneys. General requirements
BS EN ISO 9227:2006 BS EN ISO 9227:2006. Corrosion tests in artificial atmospheres. Salt spray tests
BS EN ISO 10308:2006 BS EN ISO 10308:2006. Metallic coatings. Review of porosity tests
BS EN 14278-1:2004 BS EN 14278-1:2004. Textiles. Determination of cotton fibre stickiness. Method using a manual theromodetection device
BS EN 14278-2:2004 BS EN 14278-2:2004. Textiles. Determination of cotton fibre stickiness. Method using an automatic thermodetection plate device
BS EN 12436:2002 BS EN 12436:2002. Adhesives for load-bearing timber structures. Casein adhesives. Classification and performance requirements
BS EN 14278-3:2004 BS EN 14278-3:2004. Textiles. Determination of cotton fibres stickiness. Method using an automatic thermodetection rotating drum device
BS EN 14533:2003 BS EN 14533:2003. Textiles and textile products. Burning behaviour of bedding items. Classification scheme
BS ISO 6533:2001 BS ISO 6533:2001. Forestry machinery. Portable chain-saw front hand-guard. Dimensions and clearances
BS ISO 21747:2006 BS ISO 21747:2006. Statistical methods. Process performance and capability statistics for measured quality characteristics
BS EN 1456-1:2001 BS EN 1456-1:2001. Plastic piping systems for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC-U). Specifications for piping comp
BS EN ISO 17662:2005 BS EN ISO 17662:2005. Welding. Calibration, verification and validation of equipment used for welding, including ancillary activities
BS ISO 8406:2001 BS ISO 8406:2001. Tools for moulding. Mould bases. Round locating elements and spacers
ISO8607 : 2003 (R08) EDTN 1 ISO8607 : 2003 (R08) EDTN 1. ISO8607 : 2003 Artificial insemination of animals- Frozen semen of breeding bulls- Enumeration of living aerobic microorganisms
BS EN 12617-4:2002 BS EN 12617-4:2002. Products and systems for the protection and repair of concrete structures. Test methods. Determination of shrinkage and expansion
BS EN 12192-1:2002 BS EN 12192-1:2002. Products and systems for the protection and repair of concrete structures. Granulometry analysis. Test method for dry components of premixed mortar
BS EN 13412:2002 BS EN 13412:2002. Products and systems for the protection and repair of concrete structures. Test methods. Determination of modulus of elasticity in compression
BS EN 13057:2002 BS EN 13057:2002. Products and systems for the protection and repair of concrete structures. Test methods. Determination of resistance of capillary absorption
BS EN 13441:2002 BS EN 13441:2002. Biotechnology. Laboratories for research, development and analysis. Guidance on containment of genetically modified plants
BS EN 12999:2002+A2:2006 BS EN 12999:2002+A2:2006. Cranes. Loader cranes
BS EN 13137:2001 BS EN 13137:2001. Characterisation of waste. Determination of total organic carbon (TOC) in waste, sludges and sediments
ISO/IEC13240 : 2001 EDTN 1 ISO/IEC13240 : 2001 EDTN 1. ISO/IEC13240 : 2001 Information technology- Document description and processing languages- Interchange Standard for Multimedia Interactive Docume
BS EN 14238:2004 BS EN 14238:2004. Cranes. Manually controlled load manipulating devices
DD ENV 14027:2001 DD ENV 14027:2001. Method for the simulation of wear before the detection of nickel release from coated metal and combination spectacle frames
BS EN 14268:2005 BS EN 14268:2005. Irrigation techniques. Meters for irrigation water
BS EN 19:2002 BS EN 19:2002. Industrial valves. Marking of metallic valves
BS EN 50123-2:2003 BS EN 50123-2:2003. Railway applications. Fixed installations. D.C. switchgear. D.C. circuit breakers
BS EN 12274-8:2005 BS EN 12274-8:2005. Slurry surfacing. Test methods. Visual assessment of defects
BS EN 50123-3:2003 BS EN 50123-3:2003. Railway applications. Fixed installations. D.C. switchgear. Indoor d.c. disconnectors, switch-disconnectors and earthing switches
BS ISO 10816-5:2001 BS ISO 10816-5:2001. Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Machine sets in hydraulic power and pumping plants
BS EN 50123-4:2003 BS EN 50123-4:2003. Railway applications. Fixed installations. D.C. switchgear. Outdoor d.c. disconnectors, switch-disconnectors and earthing switches
BS EN 50123-5:2003 BS EN 50123-5:2003. Railway applications. Fixed installations. D.C. switchgear. Surge arresters and low-voltage limiters for specific use in d.c. systems
BS EN 13530-1:2002 BS EN 13530-1:2002. Cryogenic vessels. Large transportable vacuum insulated vessels. Fundamental requirements
BS 7291-1:2001 BS 7291-1:2001. Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings. General requirements
BS EN 50123-6:2003 BS EN 50123-6:2003. Railway applications. Fixed installations. D.C. switchgear. D.C. switchgear assemblies
BS 7291-2:2001 BS 7291-2:2001. Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings. Specification for polybutylene (PB) pip
BS 7291-3:2001 BS 7291-3:2001. Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings. Specification for cross-linked polyethy
BS 5955-8:2001 BS 5955-8:2001. Plastics pipework (thermoplastics materials). Specification for the installation of thermoplastic pipes and associated fittings for use in domestic hot and cold services
BS EN 50123-7-1:2003 BS EN 50123-7-1:2003. Railway applications. Fixed installations. d.c. switchgear. Measurement, control and protection devices for specific use in d.c. traction systems. Measuremen
BS EN 50123-7-2:2003 BS EN 50123-7-2:2003. Railway applications. Fixed installations. d.c. switchgear. Measurement, control and protection devices for specific use in d.c. traction systems. Isolating
BS EN 50123-7-3:2003 BS EN 50123-7-3:2003. Railway applications. Fixed installations. d.c. switchgear. Measurement, control and protection devices for specific use in d.c. traction systems. Isolating
PAS 41:2003 PAS 41:2003. Directional sounders. Requirements and tests
DD ENV 14194:2002 DD ENV 14194:2002. Foodstuffs. Determination of saxitoxin and dc-saxitoxin in mussels. HPLC method using post column derivatisation
BS EN 13284-1:2002 BS EN 13284-1:2002. Stationary source emissions. Determination of low range mass concentration of dust. Manual gravimetric method
BS ISO/IEC 5218:2004 BS ISO/IEC 5218:2004. Information technology. Codes for the representation of human sexes
BS ISO 4148:2004 BS ISO 4148:2004. Road vehicles. Special warning lamps. Dimensions
ISO209 : 2007 EDTN1 ISO209 : 2007 EDTN1. ISO 209 Aluminium and aluminium alloys - Chemical composition
BS EN 12371:2001 BS EN 12371:2001. Natural stone test methods. Determination of frost resistance
PD ISO/TR 18569:2004 PD ISO/TR 18569:2004. Safety of machinery. Guidelines for the understanding and use of safety of machinery standards.
BS EN 14502-1:2005 BS EN 14502-1:2005. Cranes. Equipment for lifting persons. Suspended baskets
BS ISO 15161:2001 BS ISO 15161:2001. Guidelines on the application of ISO 9001:2000 for the food and drink industry
BS EN 14198:2004 BS EN 14198:2004. Railway applications. Braking. Requirements for the brake systems of trains hauled by a locomotive
BS EN 13000:2004 BS EN 13000:2004. Cranes. Mobile cranes
BS EN 14439:2006 BS EN 14439:2006. Cranes. Safety. Tower cranes
BS EN 772-6:2001 BS EN 772-6:2001. Methods of test for masonry units. Determination of bending tensile strength of aggregate concrete masonry units
BS EN ISO 5269-2:2001 BS EN ISO 5269-2:2001. Pulps. Preparation of laboratory sheets for physical testing. Rapid-Kothen method
BS EN 50306-4:2002 BS EN 50306-4:2002. Railway applications. Railway rolling stock cables having special fire performance. Thin wall. Multicore and multipair cables standard wall sheathed
BS EN 50306-3:2002 BS EN 50306-3:2002. Railway applications. Railway rolling stock cables having special fire performance. Thin wall. Single core and multicore cables (pairs, triples and quads) screen
BS EN 50306-1:2002 BS EN 50306-1:2002. Railway applications. Railway rolling stock cables having special fire performance. Thin wall. General requirements
BS EN 50306-2:2002 BS EN 50306-2:2002. Railway applications. Railway rolling stock cables having special fire performance. Thin wall. Single core cables
BS 7985:2002 BS 7985:2002. Code of Practice for the use of rope access methods for industrial purposes
BS 5325:2001 BS 5325:2001. Installation of textile floor coverings. Code of practice
BS EN 13852-2:2004 BS EN 13852-2:2004. Cranes. Offshore cranes. Floating cranes
BS EN 13157:2004 BS EN 13157:2004. Cranes. Safety. Hand powered lifting equipment
BS EN 13155:2003 BS EN 13155:2003. Cranes. Safety. Non-fixed load lifting attachments
BS EN 13655:2002 BS EN 13655:2002. Plastics. Mulching thermoplastic films for use in agriculture and horticulture
BS ISO 3867:2001 BS ISO 3867:2001. Composition cork. Expansion joint fillers. Test methods
BS ISO 3869:2001 BS ISO 3869:2001. Composition cork. Expansion joint fillers. Specifications, packaging and marking
BS EN 13528-3:2003 BS EN 13528-3:2003. Ambient air quality. Diffusive samplers for the determination of concentrations of gases and vapours. Requirements and test methods. Guide to selection, use and
BS EN 13781:2002 BS EN 13781:2002. Protective helmets for drivers and passengers of snowmobiles and bobsleighs
KIT 93 KIT 93. Records management standards kit
ISO5267-2 : 2001 EDTN 2 ISO5267-2 : 2001 EDTN 2. ISO5267-2 : 2001 Pulps- Determination of drainability. Part 2: Canadian standard freeness method
BS EN 14250:2004 BS EN 14250:2004. Timber structures. Product requirements for prefabricated structural members assembled with punched metal plate fasteners
BS EN 14251:2003 BS EN 14251:2003. Structural round timber. Test methods
BS ISO 15724:2001 BS ISO 15724:2001. Metallic and other inorganic coatings. Electrochemical measurement of diffusible hydrogen in steels. Barnacle electrode method
WD/ISO/IEC14496-1 : 2001 WD/ISO/IEC14496-1 : 2001 . ISO/IEC 14496-1 : 2001 Information Technology- Coding of audio-visual objects. Part 1: Systems
BS ISO 491:2002 BS ISO 491:2002. Cinematography. 35 mm motion-picture film and magnetic film. Cutting and perforating dimensions
BS EN 60601-2-49:2001, IEC 60601-2-49:2001 BS EN 60601-2-49:2001, IEC 60601-2-49:2001. Medical electrical equipment. Particular requirements for safety. Particular requirements for the safety of multi
BS ISO 11393-5:2001 BS ISO 11393-5:2001. Protective clothing for users of hand-held chain-saws. Test methods and performance requirements for protective gaiters
BS EN 1514-6:2003 BS EN 1514-6:2003. Flanges and their joints. Dimensions of gaskets for PN-designated flanges. Covered serrated metal gaskets for use with steel flanges
BS ISO 17058:2004 BS ISO 17058:2004. Steel and iron. Determination of arsenic content. Spectrophotometric method
BS ISO/IEC 15457-1:2001 BS ISO/IEC 15457-1:2001. Identification cards. Thin flexible cards. Physical characteristics
BS ISO/IEC 15457-2:2001 BS ISO/IEC 15457-2:2001. Identification cards. Thin flexible cards. Magnetic recording techniques
BS ISO/IEC 11694-4:2001 BS ISO/IEC 11694-4:2001. Identification cards. Optical memory cards. Linear recording method. Logical data structures
BS ISO 8600-2:2002 BS ISO 8600-2:2002. Optics and optical instruments. Medical endoscopes and endoscopic accessories. Particular requirements for rigid bronchoscopes
BS ISO 15303:2001 BS ISO 15303:2001. Animal and vegetable fats and oils. Detection and identification of a volatile organic contaminent by GC/MS
BS ISO 22234:2005 BS ISO 22234:2005. Cinematography. Relative and absolute sound pressure levels for motion-picture multi-channel sound systems. Measurement methods and levels applicable to analog pho
BS ISO 1223:2003 BS ISO 1223:2003. Cinematography. Picture areas for motion-picture films for television. Position and dimensions
BS 8747:2007 BS 8747:2007. Reinforced bitumen membranes (RBMs) for roofing. Guide to selection and specification
BS ISO 9236-1:2004 BS ISO 9236-1:2004. Photography. Sensitometry of screen/film systems for medical radiography. Determination of sensitometric curve shape, speed and average gradient
BS 5306-3:2003 BS 5306-3:2003. Fire extinguishing installations and equipment on premises. Code of practice for the inspection and maintenance of portable fire extinguishers
BS EN 1514-7:2004 BS EN 1514-7:2004. Flanges and their joints. Dimensions of gaskets for PN-designated flanges. Covered metal jacketed gaskets for use with steel flanges
BS EN 376:2002 BS EN 376:2002. Information supplied by the manufacturer with in vitro diagnostic reagents for self-testing
BS EN 592:2002 BS EN 592:2002. Instructions for use for in vitro diagnostic instruments for self-testing
BS EN 12560-6:2003 BS EN 12560-6:2003. Flanges and their joints. Gaskets for class-designated flanges. Covered serrated metal gaskets for use with steel flanges
BS EN 12560-7:2004 BS EN 12560-7:2004. Flanges and their joints. Gaskets for class-designated flanges. Covered metal jacketed gaskets for use with steel flanges
WD/ISO19338 : 2003 EDTN1 WD/ISO19338 : 2003 EDTN1. ISO19338 : 2003 Performance and assessment requirements for acceptance of national standards on structural concrete
BS EN 61834-8:2001 BS EN 61834-8:2001. Recording. Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems). PALpl
BS EN 61947-2:2002 BS EN 61947-2:2002. Electronic projection. Measurement and documentation of key performance criteria. Variable resolution projectors
DD ENV 13734:2000 DD ENV 13734:2000. Health informatics. Vital signs information representation
DD ENV 12251:2001 DD ENV 12251:2001. Health informatics. Secure user identification for health care. Management and security of authentication by passwords
DD ENV 13735:2001 DD ENV 13735:2001. Health informatics. Interoperability of patient connected medical devices
PD IEC TR 62285:2002 PD IEC TR 62285:2002. Non-linear coefficient measuring methods. Application guide
BS EN 60793-1-1:2003 BS EN 60793-1-1:2003. Optical fibres. Measurement methods and test procedures. General and guidance
PD IEC/TR 61948-1:2001 PD IEC/TR 61948-1:2001. Nuclear medicine instrumentation. Routine tests. Radiation counting systems
PD CEN/TR 15310-2:2006 PD CEN/TR 15310-2:2006. Characterization of waste. Sampling of waste materials. Guidance on sampling techniques
PD CEN/TR 15310-3:2006 PD CEN/TR 15310-3:2006. Characterization of waste. Sampling of waste materials. Guidance on procedures for sub-sampling in the field
PD CEN/TR 15310-4:2006 PD CEN/TR 15310-4:2006. Characterization of waste. Sampling of waste materials. Guidance on procedures for sample packaging, storage, preservation, transport and delivery
BS ISO 2631-4:2001 BS ISO 2631-4:2001. Mechanical vibration and shock. Evaluation of human exposure to whole-body vibration. Guidelines for the evaluation of the effects of vibration and rotational mo
BS EN 50107-2:2005 BS EN 50107-2:2005. Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV. Requirements for earth-leak
BS EN 13572:2002 BS EN 13572:2002. Footwear. Test methods for uppers, lining and insocks. Seam strength
BS EN 10151:2002 BS EN 10151:2002. Stainless steel strip for springs. Technical delivery conditions
BS ISO 16063-11:1999 BS ISO 16063-11:1999. Methods for the calibration of vibration and shock transducers. Primary vibration calibration by laser interferometry
BS ISO 14964:2000 BS ISO 14964:2000. Mechanical vibration and shock. Vibration of stationary structures. Specific requirements for quality management in measurement and evaluation of vibration
BS AU 50-1.2.1b:2001, ISO 4209-1:2001 BS AU 50-1.2.1b:2001, ISO 4209-1:2001. Tyres and wheels. Tyres. Commercial vehicle tyres. Tyres
BS EN 14182:2002 BS EN 14182:2002. Packaging. Terminology. Basic terms and definitions
DD ENV ISO/TR 13843:2001 DD ENV ISO/TR 13843:2001. Water quality. Guidance on validation of microbiological methods
BS EN 61523-1:2002, IEC 61523-1:2001 BS EN 61523-1:2002, IEC 61523-1:2001. Delay and power calculation standards. Integrated circuit delay and power calculation systems
BS EN 82045-1:2001, IEC 82045-1:2001 BS EN 82045-1:2001, IEC 82045-1:2001. Document management. Principles and methods
BS ISO 10056:2001 BS ISO 10056:2001. Mechanical vibration. Measurement and analysis of whole-body vibration to which passengers and crew are exposed in railway vehicles
BS ISO 10326-2:2001 BS ISO 10326-2:2001. Mechanical vibration. Laboratory method for evaluating vehicle seat vibration. Application to railway vehicles
BS 7981:2002 BS 7981:2002. Code of practice for the installation, maintenance, thorough examination and safe use of mast climbing work platforms (MCWPs)
BS EN ISO 9239-1:2002 BS EN ISO 9239-1:2002. Reaction to fire tests. Horizontal surface spread of flame on floor-covering systems. Determination of the burning behaviour using a radiant heat source
BS EN ISO 11925-2:2002 BS EN ISO 11925-2:2002. Reaction to fire tests. Ignitability of building products subjected to direct impingement of flame. Single-flame source test
BS EN ISO 1716:2002 BS EN ISO 1716:2002. Reaction to fire tests for building products. Determination of the heat of combustion
BS EN 13823:2002 BS EN 13823:2002. Reaction to fire tests for building products. Building products excluding floorings exposed to the thermal attack by a single burning item
BS EN 13501-1:2002 BS EN 13501-1:2002. Fire classification of construction products and building elements. Classification using test data from reaction to fire tests
BS EN 50016:2002 BS EN 50016:2002. Electrical apparatus for potentially explosive atmospheres. Pressurized apparatus "p"
BS EN 12882:2002 BS EN 12882:2002. Conveyor belts for general purpose use. Electrical and flammability safety requirements
BS EN 60601-2-26:2003 BS EN 60601-2-26:2003. Medical electrical equipment. Particular requirements for safety. Particular requirements for the safety of electroencephalographs
BS EN ISO 11378-2:2001 BS EN ISO 11378-2:2001. Textile floor coverings. Laboratory soiling tests. Drum test
BS EN 50394-1:2004 BS EN 50394-1:2004. Electrical apparatus for potentially explosive atmospheres. Group I. Intrinsically safe systems. Construction and testing
BS EN 61958:2001, IEC 61958:2000 BS EN 61958:2001, IEC 61958:2000. High-voltage prefabricated switchgear and controlgear assemblies. Voltage presence indicating systems
KIT 94 KIT 94. Design management systems kit
BS ISO 6743-3:2003 BS ISO 6743-3:2003. Lubricants, industrial oils and related products (class L). Classification. Family D (Compressors)
BS EN 80416-3:2003 BS EN 80416-3:2003. Basic principles for graphical symbols for use on equipment. Guidelines for the application of graphical symbols
BS EN ISO 9832:2003 BS EN ISO 9832:2003. Animal and vegetable fats and oils. Determination of residual technical hexane content
PD CR 13097:2001 PD CR 13097:2001. Characterisation of sludges. Good practice for utilisation in agriculture
BS ISO 6870:2002 BS ISO 6870:2002. Animal feeding stuffs. Qualitative determination of zearalenone
BS EN 13599:2002 BS EN 13599:2002. Copper and copper alloys. Copper plate, sheet and strip for electrical purposes
ISO8583-3 : 2003 EDTN 2 ISO8583-3 : 2003 EDTN 2. ISO8583-3 : 2003 Financial transaction card originated messages- Interchange message specifications. Part 3: Maintenance procedures for messages, data
BS EN 14260:2003 BS EN 14260:2003. Derivatives from coal pyrolysis. Coal tar and pitch based binders and related products. Road tars. Characteristics and test methods
BS EN 14261:2003 BS EN 14261:2003. Derivatives from coal pyrolysis. Coal tar and pitch based binders and related products. Refractory binders. Characteristics and test methods
BS EN 14262:2003 BS EN 14262:2003. Derivatives from coal pyrolysis. Coal tar and pitch based binders and related products. Briquetting pitch. Characteristics and test methods
BS EN 14263:2003 BS EN 14263:2003. Derivatives from coal pyrolysis. Coal tar and pitch based binders and related products. Carbon binder pitch. Characteristics and test methods
BS EN 14264:2003 BS EN 14264:2003. Derivatives from coal pyrolysis. Coal tar and pitch based binders and related products. Impregnating pitch. Characteristics and test methods
BS EN 14265:2003 BS EN 14265:2003. Derivatives from coal pyrolysis. Coal tar and pitch based binders and related products. Painting tar. Characteristics and test methods
BS EN 62114:2001, IEC 62114:2001 BS EN 62114:2001, IEC 62114:2001. Electrical insulation systems (EIS). Thermal classification
BS EN 14266:2003 BS EN 14266:2003. Derivatives from coal pyrolysis. Coal tar and pitch based binders and related products. Coating tar. Characteristics and test methods
BS EN 14037-2:2003 BS EN 14037-2:2003. Ceiling mounted radiant panels supplied with water at temperature below 120°C. Test methods for thermal output
BS EN 14037-3:2003 BS EN 14037-3:2003. Ceiling mounted radiant panels supplied with water at temperature below 120°C. Rating method and evaluation of radiant thermal output
BS EN 14037-1:2003 BS EN 14037-1:2003. Ceiling mounted radiant panels supplied with water at temperature below 120°C. Technical specifications and requirements
HB 10195:2001 HB 10195:2001. Sustainability. A manager's guide
ISO6187 : 2001 EDTN 1 ISO6187 : 2001 EDTN 1. ISO6187 : 2001 Rigid cellular plastics - Determination of friability.
BS ISO 16065-1:2001 BS ISO 16065-1:2001. Pulps. Determination of fibre length by automated optical analysis. Polarized light method
BS 5276-2:2003 BS 5276-2:2003. Pressure vessel details (dimensions). Specification for saddle supports for horizontal cylindrical pressure vessels
BS EN 1860-4:2004 BS EN 1860-4:2004. Appliances, solid fuels and firelighters for barbecueing. Single use barbecues burning solid fuels. Requirements and test methods
WD/ISO/TS17477 : 2003 EDTN 1 WD/ISO/TS17477 : 2003 EDTN 1. ISO/TS17477 : 2003 Acceptance tests for CO2-laser beam machines for welding and cutting - using 2D moving optics type
BS EN 61850-9-2:2004 BS EN 61850-9-2:2004. Communication networks and systems in substations. Specific communication service mapping (SCSM). Sampled values over ISO/IEC 8802-3
BS EN 413-2:2005 BS EN 413-2:2005. Masonry cement. Test methods
BS EN 885:2001 BS EN 885:2001. Chemicals used for treatment of water intended for human consumption. Polyaluminium chloride hydroxide silicate
BS EN 886:2001 BS EN 886:2001. Chemicals used for treatment of water intended for human consumption. Polyaluminium hydroxide silicate sulfate
BS ISO 14892:2002 BS ISO 14892:2002. Dried skimmed milk. Determination of vitamin D content using high-performance liquid chromatography
DD ISO/TS 19127:2005 DD ISO/TS 19127:2005. Geographic information. Geodetic codes and parameters
BS EN 13526:2002 BS EN 13526:2002. Stationary source emissions. Determination of the mass concentration of total gaseous organic carbon in flue gases from solvent using processes. Continuous flame ion
BS EN 887:2001 BS EN 887:2001. Chemicals used for treatment of water intended for human consumption. Aluminium iron (III) sulfate
BS EN 935:2001 BS EN 935:2001. Chemicals used for treatment of water intended for human consumption. Aluminium iron (III) chloride (monomeric) and aluminium iron (III) chloride hydroxide (monomeric)
BS EN 10210-1:2006 BS EN 10210-1:2006. Hot finished structural hollow sections of non-alloy and fine grain steels. Technical delivery requirements
BS ISO 6656:2002 BS ISO 6656:2002. Animal and vegetable fats and oils. Determination of polyethylene-type polymers
BS ISO 8066-2:2001 BS ISO 8066-2:2001. Rubber and plastics hoses and hose assemblies for automotive air conditioning. Specification. Refrigerant 134a
BS EN 13816:2002 BS EN 13816:2002. Transportation. Logistics and services. Public passenger transport. Service quality definition, targeting and measurement
PD ISO/TS 16949:2002 PD ISO/TS 16949:2002. Quality management systems. Particular requirements for the application of ISO 9001:2000 for automotive production and relevant service part organizations
BS ISO 3901:2001 BS ISO 3901:2001. Information and documentation. International Standard Recording Code (ISRC)
BS ISO 7176-2:2001 BS ISO 7176-2:2001. Wheelchairs. Determination of dynamic stability of electric wheelchairs
BS ISO 10542-2:2001 BS ISO 10542-2:2001. Technical systems and aids for disabled or handicapped persons. Wheelchair tiedown and occupant-restraint systems. Four-point strap-type tiedown systems
BS ISO 10542-1:2001 BS ISO 10542-1:2001. Technical systems and aids for disabled or handicapped persons. Wheelchair tiedown and occupant-restraint systems. Requirements and test methods for all system
PD IEC/TR 61948-2:2001, IEC/TR 61948-2:2001 PD IEC/TR 61948-2:2001, IEC/TR 61948-2:2001. Nuclear medicine instrumentation. Routine tests. Scintillation cameras and single photon emission computed tomo
BS EN 13482:2001 BS EN 13482:2001. Rubber hoses and hose assemblies for asphalt and bitumen. Specification
BS ISO 5061:2002 BS ISO 5061:2002. Animal feeding stuffs. Determination of castor oil seed husks. Microscope method
BS 5499-6:2002 BS 5499-6:2002. Graphical symbols and signs. Safety signs, including fire safety signs. Creation and design of graphical symbols for use in safety signs. Requirements
BS 8412:2004 BS 8412:2004. Equipment for crop protection. Performance requirements for application systems used to make spatially variable applications to field crops. Specification
BS 5350-C5:2002 BS 5350-C5:2002. Methods of test for adhesives. Determination of bond strength in longitudinal shear for rigid adherends
BS ISO 7176-6:2001 BS ISO 7176-6:2001. Wheelchairs. Determination of maximum speed, acceleration and deceleration of electric wheelchairs
BS EN 13466-1:2001 BS EN 13466-1:2001. Fertilizers. Determination of water content (Karl Fischer methods). Methanol as extracting medium
BS ISO/IEC 15292:2001 BS ISO/IEC 15292:2001. Information technology. Security techniques. Protection profile registration procedures
BS EN 13466-2:2001 BS EN 13466-2:2001. Fertilizers. Determination of water content (Karl Fischer methods). 2-propanol as extracting medium
BS 7722:2002 BS 7722:2002. Surface covered PVC-U profiles for windows and doors. Specification
BS EN 12944-3:2002 BS EN 12944-3:2002. Fertilizers and liming materials. Vocabulary. Terms relating to liming materials
BS EN 13266:2001 BS EN 13266:2001. Slow-release fertilizers. Determination of the release of the nutrients. Method for coated fertilizers
BS EN 13475:2002 BS EN 13475:2002. Liming materials. Determination of calcium content. Oxalate method
BS ISO/IEC 15946-1:2002 BS ISO/IEC 15946-1:2002. Information technology. Security techniques. Cryptographic techniques based on elliptic curves. General
BS ISO/IEC 15946-2:2002 BS ISO/IEC 15946-2:2002. Information technology. Security techniques. Cryptographic techniques based on elliptic curves. Digital signatures
BS ISO/IEC 15946-3:2002 BS ISO/IEC 15946-3:2002. Information technology. Security techniques. Cryptographic techniques based on elliptic curves. Key establishment
PD IEC TR 62296:2003 PD IEC TR 62296:2003. Considerations of unaddressed safety aspects in the Second Edition of IEC 60601-1 and proposals for new requirements
BS IEC/TS 60695-8-2:2001 BS IEC/TS 60695-8-2:2001. Fire hazard testing. Heat release. Summary and relevance of test methods
PD 6673:2002 PD 6673:2002. PNO-ISC Information Document 015 ISUP Overload Controls
BS 4971:2002 BS 4971:2002. Repair and allied processes for the conservation of documents. Recommendations
BS ISO 18436-1:2004 BS ISO 18436-1:2004. Condition monitoring and diagnostics of machines. Requirements for training and certification of personnel. General requirements for certifying bodies and the
BS ISO 18436-2:2003 BS ISO 18436-2:2003. Condition monitoring and diagnostics of machines. Requirements for training and certification of personnel. Vibration condition monitoring and diagnostics
BS EN 12805:2002 BS EN 12805:2002. Automotive LPG components. Containers
BS EN 1870-8:2001 BS EN 1870-8:2001. Safety of woodworking machines. Circular sawing machines. Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unl
BS EN 13413:2002 BS EN 13413:2002. Resilient floor coverings. Polyvinyl chloride floor coverings on a filled fibrous backing. Specification
BS EN 14295:2003 BS EN 14295:2003. Welding consumables. Wire and tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels. Classification
BS ISO 8587:2006 BS ISO 8587:2006. Sensory analysis. Methodology. Ranking
BS EN 60601-1-6:2004 BS EN 60601-1-6:2004. Medical electrical equipment. General requirements for safety. Collateral standard. Usability
BS ISO 21093:2003 BS ISO 21093:2003. Oil of dwarf pine (Pinus mugo Turra)
BS ISO 15509:2001 BS ISO 15509:2001. Adhesives. Determination of the bond strength of engineering-plastic joints
DD 257-1:2003 DD 257-1:2003. Methods of analysis of wood preservatives and treated timber. Quantitative analysis of wood preservative solutions and treated timber containing boron compounds. Determina
BS EN 14672:2005 BS EN 14672:2005. Characterization of sludges. Determination of total phosphorous
BS EN 14701-1:2006 BS EN 14701-1:2006. Characterization of sludges. Filtration properties. Capillary suction time (CST)
BS EN 61300-2-14:2006 BS EN 61300-2-14:2006. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Optical power handling and damage threshold chara
BS EN 14702-1:2006 BS EN 14702-1:2006. Characterization of sludges. Settling properties. Determination of settleability (Determination of the proportion of sludge volume and sludge volume index)
BS EN 14701-2:2006 BS EN 14701-2:2006. Characterization of sludges. Filtration properties. Determination of the specific resistance to filtration
BS EN 14701-3:2006 BS EN 14701-3:2006. Characterization of sludges. Filtration properties. Determination of the compressibility
BS 5293-7:2001, ISO 1125:1999 BS 5293-7:2001, ISO 1125:1999. Sampling and testing carbon black for use in the rubber industry. Method for determination of ash content
PD CR 14230:2001 PD CR 14230:2001. Global medical device nomenclature for the purpose of regulatory data exchange
BS EN 60401-2:2003 BS EN 60401-2:2003. Terms and nomenclature for cores made of magnetically soft ferrites. Reference of dimensions
PD CEN/TR 15126:2005 PD CEN/TR 15126:2005. Characterization of sludges. Good practice for land filling of sludgesan d sludge treatment residues
DD 257-2:2003 DD 257-2:2003. Methods of analysis of wood preservatives and treated timber. Quantitative analysis of wood preservative solutions and treated timber containing n-butyltin compounds. Dete
BS 5293-10:2001, ISO 1304:1999 BS 5293-10:2001, ISO 1304:1999. Sampling and testing carbon black for use in the rubber industry. Method for determination of iodine absorption number
DD 257-4:2003 DD 257-4:2003. Methods of analysis of wood preservatives and treated timber. Quantitative analysis of cypermethrin in solutions of wood preservatives in organic solvents
BS EN 60401-3:2003 BS EN 60401-3:2003. Terms and nomenclature for cores made of magnetically soft ferrites. Guidelines on the format of data appearing in manufacturers' catalogues of transformer and i
BS 8414-1:2002 BS 8414-1:2002. Fire performance of external cladding systems. Test methods for non-loadbearing external cladding systems applied to the face of a building
BS EN 13569:2001 BS EN 13569:2001. Cabinet roller towels. Performance requirements and processing
BS AU 50-3.2a:2002 BS AU 50-3.2a:2002. Tyres and wheels. Valves. Tyre valve threads. Section 2a: Tyre valve threads
BS EN 60512-25-4:2001, IEC 60512-25-4:2001 BS EN 60512-25-4:2001, IEC 60512-25-4:2001. Connectors for electronic equipment. Test and measurements. Test 25d. Propagation delay
BS EN 62092:2002, IEC 62092:2001 BS EN 62092:2002, IEC 62092:2001. Ultrasonics. Hydrophones. Characteristics and calibration in the frequency range from 15 MHz to 40 MHz
BS EN 1745:2002 BS EN 1745:2002. Masonry and masonry products. Methods for determining design thermal values
BS EN 14276-1:2006 BS EN 14276-1:2006. Pressure equipment for refrigerating systems and heat pumps. Vessels. General requirements
BS EN 14277:2006 BS EN 14277:2006. Ventilation for buildings. Air terminal devices. Method for airflow measurement by calibrated sensors in or close to ATD/plenum boxes
BS EN 62156:2001 BS EN 62156:2001. Digital video recording with video compression 12,65 mm type D-9 component format 525/60 and 625/50 (digital S)
BS EN 14286:2004 BS EN 14286:2004. Aluminium and aluminium alloys. Weldable rolled products for tanks for the storage and transportation of dangerous goods
BS EN 13364:2002 BS EN 13364:2002. Natural stone test methods. Determination of the breaking load at dowel hole
WD/ISO IWA 1 : 2001 WD/ISO IWA 1 : 2001 . ISO IWA 1 : 2001 Quality Management Systems - Guidelines for process improvements in health service organizations
BS EN 12152:2002 BS EN 12152:2002. Curtain walling. Air permeability. Performance requirements and classification
BS ISO 7176-9:2001 BS ISO 7176-9:2001. Wheelchairs. Climatic tests for electric wheelchairs
PD ROBT-004:2002 PD ROBT-004:2002. EC Directives, functional safety and the role of CENELEC standardization
BS ISO 12142:2001 BS ISO 12142:2001. Electronic imaging. Media error monitoring and reporting techniques for verification of stored data on optical digital data disks
BS EN 14200:2004 BS EN 14200:2004. Railway applications. Suspension components. Parabolic springs, steel
BS EN 50377-5-1:2003 BS EN 50377-5-1:2003. Connectors sets and interconnect components to be used in optical fibre communication systems. Product specifications. Connector sets and interconnect compon
BS EN ISO 22478:2006 BS EN ISO 22478:2006. Water quality. Determination of certain explosives and related compounds. Method using high-performance liquid chromatography (HPLC) with UV detection
BS EN ISO 18412:2006 BS EN ISO 18412:2006. Water quality. Determination of chromium (VI). Photometric method for weakly contaminated water
BS EN 1504-5:2004 BS EN 1504-5:2004. Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. Concrete inject
BS EN 62149-6:2003 BS EN 62149-6:2003. Fibre optic active components and devices. Performance standards. 650-nm 250-Mbit/s plastic optical fibre transceivers
BS EN 13146-6:2002 BS EN 13146-6:2002. Railway applications. Track. Test methods for fastening systems. Effect of severe environmental conditions
BS EN ISO 22777:2004 BS EN ISO 22777:2004. Footwear. Test method for accessories: touch and close fasteners. Peel strenght before and after repeated closingst method for accessories. Touch and close f
BS EN 187104:2001 BS EN 187104:2001. Harmonized system of quality assessment for electronic components. Family specification. Single-mode optical fibre cables to be used as underwater cables for lakes
BS EN ISO 22776:2004 BS EN ISO 22776:2004. Footwear. Test method for accessories. Touch and close fasteners. Shear strength before and after repeated closing
BS EN 423:2002 BS EN 423:2002. Resilient floor coverings. Determination of resistance to staining
BS EN ISO 22775:2004 BS EN ISO 22775:2004. Footwear. Test methods for accessories. Metallic accessories. Corrosion resistance
DD ENV 14272:2002 DD ENV 14272:2002. Plywood. Calculation method for some mechanical properties
BS EN 424:2002 BS EN 424:2002. Resilient floor coverings. Determination of the effect of simulated movement of a furniture leg
BS EN 14279:2004 BS EN 14279:2004. Laminated veneer lumber (LVL). Definitions, classification and specifications
BS EN ISO 22774:2004 BS EN ISO 22774:2004. Footwear. Test methods for accessories. Shoe laces. Abrasion resistance
BS 8407:2002 BS 8407:2002. Specification for mechanical and spliced joints in conveyor belting for use underground
BS ISO/PAS 12006-3:2001 BS ISO/PAS 12006-3:2001. Building construction. Organization of information about construction works. Framework for object-oriented information exchange
EP 920 EP 920. GMDN CD-ROM (Global Medical Devices Nomenclature)
BS ISO 6072:2002 BS ISO 6072:2002. Hydraulic fluid power. Compatibility between fluids and standard elastomeric materials
BS EN 14173:2002 BS EN 14173:2002. Structural adhesives. T-peel test for flexible-to-flexible bonded assemblies
BS EN 60601-2-44:2001, BS 5724-2.44:2001 BS EN 60601-2-44:2001, BS 5724-2.44:2001. Medical electrical equipment. Particular requirements for safety. Particular requirements for the safety of X-ray equ
BS EN ISO 4934:2003 BS EN ISO 4934:2003. Steel and iron. Determination of sulfur content. Gravimetric method
BS EN ISO 8289:2001 BS EN ISO 8289:2001. Vitreous and porcelain enamels. Low voltage test for detecting and locating defects
BS EN 60601-2-47:2001, IEC 60601-2-47:2001 BS EN 60601-2-47:2001, IEC 60601-2-47:2001. Medical electrical equipment. Particular requirements for safety. Particular requirements for the safety, includi
BS EN ISO 6942:2002 BS EN ISO 6942:2002. Protective clothing. Protection against heat and fire. Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat
BS EN 13532:2002 BS EN 13532:2002. General requirements for in vitro diagnostic medical devices for self-testing
BS ISO 17497-1:2004 BS ISO 17497-1:2004. Acoustics. Sound scattering properties of surfaces. Measurement of the random-incidence scattering coefficient in a reverberation room
BS ISO 6743-99:2002 BS ISO 6743-99:2002. Lubricants, industrial oils and related products (class L). Classification. General
BS EN 12945:2002 BS EN 12945:2002. Liming materials. Determination of neutralizing value. Titrimetric methods
BS EN 12948:2002 BS EN 12948:2002. Liming materials. Determination of size distribution by dry and wet sieving
BS EN 3475-807:2002 BS EN 3475-807:2002. Aerospace series. Cables, electrical, aircraft use. Test methods. Transfer impedance
BS EN 3475-808:2002 BS EN 3475-808:2002. Aerospace series. Cables, electrical, aircraft use. Test methods. Cross-talk
BS ISO 4728:2003 BS ISO 4728:2003. Oil of Spanish wild marjoram (Thymus mastichina L.)
BS 8475:2006 BS 8475:2006. Instrumental colour measurement of textiles. Method
BS ISO 10766:2006 BS ISO 10766:2006. Hydraulic fluid power. Cylinders. Housing dimensions forrectangular-sect bearing rings for pistons and rods
BS ISO 8216-99:2002 BS ISO 8216-99:2002. Petroleum products. Fuels (class F). Classification. General
BS ISO 6743-1:2002 BS ISO 6743-1:2002. Lubricants, industrial oils and related products (class L). Classification. Family A (Total loss systems)
ISO6743-13 : 2002 EDTN 2 ISO6743-13 : 2002 EDTN 2. ISO6743-13 : 2002 Lubricants, industrial oils and related products (class L) - Classification. Part 13: Family G (Slideways)
BS EN 3745-201:2002 BS EN 3745-201:2002. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Visual examination
BS EN 3745-205:2002 BS EN 3745-205:2002. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Cable longitudinal dimensional stability
BS EN 3745-301:2002 BS EN 3745-301:2002. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Attenuation
BS EN 3745-302:2002 BS EN 3745-302:2002. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Numerical aperture
BS EN 3745-305:2002 BS EN 3745-305:2002. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Immunity to ambient light coupling
BS EN 3745-504:2002 BS EN 3745-504:2002. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Micro bending test
BS EN 3745-507:2002 BS EN 3745-507:2002. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Cut-through
BS EN 3745-508:2002 BS EN 3745-508:2002. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Torsion
BS EN 3745-509:2002 BS EN 3745-509:2002. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Kink test
BS EN 3745-510:2002 BS EN 3745-510:2002. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Bending test
BS EN 3745-511:2002 BS EN 3745-511:2002. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Cable to cable abrasion
BS EN 3745-701:2002 BS EN 3745-701:2002. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Strippability
BS EN ISO 17495:2003 BS EN ISO 17495:2003. Water quality. Determination of selected nitrophenols. Method by solid-phase extraction and gas chromatography with mass spectrometric detection
BS EN ISO 6878:2004, BS 6068-2.28:2004 BS EN ISO 6878:2004, BS 6068-2.28:2004. Water quality. Determination of phosphorus. Ammonium molybdate spectrometric method
BS IEC 60092-201:1994 BS IEC 60092-201:1994. Electrical installation in ships. System design. General
DD IEC TS 62282-1:2005 DD IEC TS 62282-1:2005. Fuel cell technologies. Terminology
BS IEC 60092-302:1997 BS IEC 60092-302:1997. Electrical installation in ships. Low-voltage switchgear and controlgear assemblies
BS IEC 60092-306:1980 BS IEC 60092-306:1980. Electrical installation in ships. Equipment. Luminaires and accessories
BS IEC 60092-307:1980 BS IEC 60092-307:1980. Electrical installation in ships. Equipment. Heating and cooking appliances
BS ISO 7507-3:2006 BS ISO 7507-3:2006. Petroleum and liquid petroleum products. Calibration of vertical cylindrical tanks. Optical-triangulation method
BS IEC 60092-501:1984 BS IEC 60092-501:1984. Electrical installation in ships. Special features. Electric propulsion plant
BS IEC 60092-502:1999 BS IEC 60092-502:1999. Electrical installation in ships. Tankers. Special features
BS IEC 60092-503:1975 BS IEC 60092-503:1975. Electrical installation in ships. Special features. A.C. supply systems with voltages in the range above 1 kV up to and including 11 kV
BS IEC 60092-504:2001 BS IEC 60092-504:2001. Electrical installation in ships. Special features. Control and instrumentation
BS IEC 60092-506:1996 BS IEC 60092-506:1996. Electrical installation in ships. Special features. Ships carrying specific dangerous goods and materials hazardous only in bulk
BS IEC 60533:1999 BS IEC 60533:1999. Electrical and electronic installations in ships. Electromagnetic compatibility
BS IEC 61363-1:1998 BS IEC 61363-1:1998. Electrical installations of ships and mobile and fixed offshore units. Procedures for calculating short-circuit currents in three-phase a.c.
ISO/IEC18017 : 2001 EDTN 1 ISO/IEC18017 : 2001 EDTN 1. ISO/IEC18017 : 2001 Information technology. Telecommunications and information exchange between systems. Private integrated services network. Map
BS EN 61935-2:2003 BS EN 61935-2:2003. Generic cabling systems. Specification for the testing of balanced communication cabling in accordance with EN 50173. Patch cords and work area cords
BS EN 60073:2002 BS EN 60073:2002. Basic and safety principles for man-machine interface, marking and identification. Coding principles for indicators and actuators
BS EN 60447:2004 BS EN 60447:2004. Basic and safety principles for man-machine interface, marking and identification. Actuating principles
BS EN 60695-5-1:2003 BS EN 60695-5-1:2003. Fire hazard testing. Assessment of potential corrosion damage by fire effluent. General guidance
PD IEC/TR 60071-4:2004 PD IEC/TR 60071-4:2004. Insulation co-ordination. Computational guide to insulation co-ordination and modelling of electrical networks
BS EN ISO 5674:2004 BS EN ISO 5674:2004. Tractors and machinery for agriculture and forestry. Guards for power take-off (PTO) drive-shafts. Strength and wear tests and acceptance criteria
KIT 95 KIT 95. Environmental labelling kit
BS EN 13879:2002 BS EN 13879:2002. Wood-based panels. Determination of edgewise bending properties
BS EN 14297:2004 BS EN 14297:2004. Chimneys. Freeze-thaw resistance test method for chimney products
BS EN ISO 8795:2001 BS EN ISO 8795:2001. Plastics piping systems for the transport of water intended for human consumption. Migration assessment. Determination of migration values of plastics pipes an
BS ISO 11648-2:2001 BS ISO 11648-2:2001. Statistical aspects of sampling from bulk materials. Sampling of particulate materials
BS ISO 8085-2:2001 BS ISO 8085-2:2001. Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels. Metric series. Specifications. Spigot fittings for butt fusion, for socket
BS EN 14290:2004 BS EN 14290:2004. Zinc and zinc alloys. Secondary raw material
BS EN 13390:2002 BS EN 13390:2002. Food processing machinery. Pie and tart machines. Safety and hygiene requirements
04/30061005 DC 04/30061005 DC. ISO 17769. Liquid pumps. General terms and installation. Definitions, quantities, letter symbols and units
BS ISO 18738:2003 BS ISO 18738:2003. Lifts (elevators). Measurement of lift ride quality
BS 7870-4.12:2001 BS 7870-4.12:2001. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables with extruded insulation for rated vol
BS 7870-4.13:2001 BS 7870-4.13:2001. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables with extruded insulation for rated vol
BS ISO 15166-2:2000 BS ISO 15166-2:2000. Adhesives. Methods of preparing bulk specimens. Elevated-temperature-curing one-part systems
BS EN ISO 6259-1:2001 BS EN ISO 6259-1:2001. Thermoplastics pipes. Determination of tensile properties. General test method
BS EN 60749-19:2003 BS EN 60749-19:2003. Semiconductor devices. Mechanical and climatic test methods. Die shear strength
BS EN 61988-2-2:2003 BS EN 61988-2-2:2003. Plasma display panels. Measuring methods. Optoelectrical
BS EN 60749-36:2003 BS EN 60749-36:2003. Semiconductor devices. Mechanical and climatic test methods. Acceleration, steady state
BS EN 60749-21:2005 BS EN 60749-21:2005. Semiconductor devices. Mechanical and climatic test methods. Solderability
ISO16124 : 2004 EDTN1 ISO16124 : 2004 EDTN1. ISO16124 : 2004 Steel wire rod - Dimensions and tolerances
BS EN 60749-6:2002 BS EN 60749-6:2002. Semiconductor devices. Mechanical and climatic test methods. Storage at high temperature
ISO16650 : 2004 EDTN 1 ISO16650 : 2004 EDTN 1. ISO16650 : 2004 Bead wire
BS EN 60191-6-4:2003 BS EN 60191-6-4:2003. Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packages.
BS EN 61196-4:2004 BS EN 61196-4:2004. Coaxial communication cables. Sectional specification for radiating cables
BS EN 60191-6-1:2001, IEC 60191-6-1:2001 BS EN 60191-6-1:2001, IEC 60191-6-1:2001. Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface
DD IEC/TS 61967-3:2005 DD IEC/TS 61967-3:2005. Integrated circuits. Measurement of electromagnetic emissions, 150 kHzto 1 GHz. Measurement of radiated emissions. Surface scan method
DD IEC TS 61000-1-2:2001 DD IEC TS 61000-1-2:2001. Electromagnetic compatibility (EMC). General. Methodology for the achievement of the functional safety of electrical and electronic equipment with re
BS ISO 9276-4:2001 BS ISO 9276-4:2001. Representation of results of particle size analysis. Characterization of a classification process
ISO/IEC10164-15 : 2002 EDTN 2 ISO/IEC10164-15 : 2002 EDTN 2.
ISO17565 : 2003 EDTN1 ISO17565 : 2003 EDTN1. ISO17565 : 2003 Fine ceramics - Test method for flexural strength of monolithic ceramicsat elevated temperature
BS EN 50377-9-1:2003 BS EN 50377-9-1:2003. Connectors sets and interconnect components to be used in optical fibre communication systems. Product specifications. Type MT-RJ terminated on IEC 60793-2 c
BS EN ISO 20200:2005 BS EN ISO 20200:2005. Plastics. Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test
PD ES 59008-5-3:2001, ES 59008-5-3:2001 PD ES 59008-5-3:2001, ES 59008-5-3:2001. Data requirements for semiconductor die. Particular requirements and recommendations for die types. Minimally-packaged
BS EN 50377-10-1:2003 BS EN 50377-10-1:2003. Connectors sets and interconnect components to be used in optical fibre communication systems. Product specifications. Type MU-PC terminated on IEC 60793-2
BS EN 50083-9:2002 BS EN 50083-9:2002. Cabled distribution systems for television and sound signals. Interfaces for CATV/SMATV headends and similar professional equipment for DVB/MPEG-2 transport stre
BS ISO 3272-3:2001 BS ISO 3272-3:2001. Microfilming of technical drawings and other drawing office documents. Aperture card for 35 mm microfilm
BS ISO/IEC 13249-2:2003 BS ISO/IEC 13249-2:2003. Information technology. Database languages. SQL multimedia and application packages. Full-text
BS ISO/IEC 9075 1-4,9-11,13-14:2003 BS ISO/IEC 9075 1-4,9-11,13-14:2003. Information technology. Database languages. SQL. Various parts (CD-ROM)
BS EN 14299:2004 BS EN 14299:2004. Non-active surgical implants. Particular requirements for cardiac and vascular implants. Specific requirements for arterial stents
PDIEC/TR61010-3-032 : 2002 PDIEC/TR61010-3-032 : 2002 . PDIEC/TR61010-3-032 : 2002 Safety rquirements for electrical equipment for measurement, control, and laboratory use. Part 3-032 Conformity verif
ISO/IEC14476-1 : 2002 EDTN 1 ISO/IEC14476-1 : 2002 EDTN 1. ISO/IEC14476-1 : 2002 Information technology- Enhanced Communications Transport Protocol. Part 1: Specification of simplex multicast transpor
BS ISO 14377:2002 BS ISO 14377:2002. Canned evaporated milk. Determination of tin content. Method using graphite furnace atomic absorption spectrometry
PDIEC/TR61010-3-041 : 2002 PDIEC/TR61010-3-041 : 2002 . PDIEC/TR61010-3-041 : 2002 Safety requirements for electrical equipment for measurment, control, and laboratory use. Part 3-041: Conformity veri
PDIEC/TR61010-3-042 : 2002 PDIEC/TR61010-3-042 : 2002 . PDIEC/TR61010-3-042 : 2002 Safety requirements for electrical equipment for measurement, control, and laboratory use-. Part 3-042: Conformity ve
BS ISO 8216-1:2005 BS ISO 8216-1:2005. Petroleum products. Fuels (class F). Classification. Categories of marine fuels
BS ISO 8217:2005 BS ISO 8217:2005. Petroleum products. Fuels (class F). Specifications of marine fuels
BS ISO 7251:2005 BS ISO 7251:2005. Microbiology of food and animal feeding stuffs. Horizontal method for the detection and enumeration of presumptive Escherichia coli. Most probable number technique
ISO841 : 2001 EDTN 2 ISO841 : 2001 EDTN 2. ISO841 : 2001 Industrial automation systems and intergration- Numerical control of machines- Coordinate system and motion nomenclature
BS ISO 13302:2003 BS ISO 13302:2003. Sensory analysis. Methods for assessing modifications to the flavour of foodstuffs due to packaging
ISO/IEC15444-5 : 2003 EDTN 1 ISO/IEC15444-5 : 2003 EDTN 1. ISO/IEC15444-5 : 2003 Information technology -- JPEG 2000 image coding system: Reference software. Reference software for the JP2 file format
BS EN 10088-2:2005 BS EN 10088-2:2005. Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
BS EN 10088-3:2005 BS EN 10088-3:2005. Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for gene
ISO1209-1 : 2007 EDTN3 ISO1209-1 : 2007 EDTN3. ISO 1209-1:2007 Rigid cellular plastics - Determination of flexural properties -. Part 1: Basic bending test
BS EN 14361:2004 BS EN 14361:2004. Aluminium and aluminium alloys. Chemical analysis. Sampling from metal melts
WD/AMD13605 (TO BS6493-2.1 : 1985) WD/AMD13605 (TO BS6493-2.1 : 1985). BS6493-2.1 : 1985 Semiconductor devices. Part 2: Integrated circuits - Section 2.1 General
BS ISO 11056:1999 BS ISO 11056:1999. Sensory analysis. Methodology. Magnitude estimation method
ISO/IECTR18016 : 2003 (R08)EDTN1 ISO/IECTR18016 : 2003 (R08)EDTN1. ISO/IECTR18016 : 2003 Information Technology -- Message Handling Systems (MHS) -- Interworking with Internet E-mail
PD CR 14244:2001 PD CR 14244:2001. Durability of wood and wood based products. Recommendations for measurement of emissions to the environment from treated wood in service
PD CR 12401:2003 PD CR 12401:2003. Dentistry. Guidance on the classification of dental devices and accessories
BS EN 3083:2001 BS EN 3083:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Unions, bulkhead, long welded end, for repair
BS EN 10088-1:2005 BS EN 10088-1:2005. Stainless steels. List of stainless steels
BS EN 12097:2006 BS EN 12097:2006. Ventilation for buildings. Requirements for ductwork components to facilitate maintenance of ductwork systems
DD ISO/TR 15235:2001 DD ISO/TR 15235:2001. Preparation of steel substrates before application of paints and related products. Collected information on the effect of levels of water-soluble salt contam
BS EN 14298:2004 BS EN 14298:2004. Sawn timber. Assessment of drying quality
BS EN 13053:2006 BS EN 13053:2006. Ventilation for buildings. Air handling units. Rating and performance for units, components and sections
BS EN ISO 3262-22:2001 BS EN ISO 3262-22:2001. Extenders for paints. Specifications and methods of test. Flux-calcined kieselguhr
BS ISO 14648-1:2001 BS ISO 14648-1:2001. Micrographics. Quality control of COM recorders that generate images using a single internal display system. Characteristics of the software test target
BS ISO 14648-2:2001 BS ISO 14648-2:2001. Micrographics. Quality control of COM recorders that generate images using a single internal display system. Method of use
BS EN 1028-2:2002 BS EN 1028-2:2002. Fire-fighting pumps. Fire-fighting centrifugal pumps with primer. Verification of general and safety requirements
BS EN 61300-2-42:2005 BS EN 61300-2-42:2005. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Static side load for connectors
BS EN 62216-1:2002 BS EN 62216-1:2002. Digital terrestrial television receivers for the DVB-T system. Baseline receiver specification
BS ISO 7504:2001 BS ISO 7504:2001. Gas analysis. Vocabulary
BS ISO 6547:1981 BS ISO 6547:1981. Hydraulic fluid power. Cylinders. Piston seal housings incorporating bearing rings. Dimensions and tolerances
BS AU 268:2003 BS AU 268:2003. Passenger cars and light vans. Commercial towing pole assemblies. Specification
BS ISO 7617-1:2001 BS ISO 7617-1:2001. Plastics-coated fabrics for upholstery. Specification for PVC-coated knitted fabrics
BS EN 14233:2002 BS EN 14233:2002. Materials and articles in contact with foodstuffs. Plastics. Determination of temperature of plastics materials and articles at the plastics/food interface during mi
BS EN 60747-16-3:2002 BS EN 60747-16-3:2002. Discrete semiconductor devices and integrated circuits. Microwave integrated circuits. Frequency converters
BS EN ISO 11064-1:2001 BS EN ISO 11064-1:2001. Ergonomic design of control centres. Principles for the design of control centres
BS EN 1263-2:2002 BS EN 1263-2:2002. Safety nets. Safety requirements for the positioning limits
BS EN ISO 11146-1:2005 BS EN ISO 11146-1:2005. Lasers and laser-related equipment. Test methods for laser beam widths, divergence angles and beam propagation ratios. Stigmatic and simple astigmatic be
BS EN ISO 11146-2:2005 BS EN ISO 11146-2:2005. Lasers and laser-related equipment. Test methods for laser beam widths, divergence angles and beam propagation ratios. General astigmatic beams
PD ISO/TR 11146-3:2004 PD ISO/TR 11146-3:2004. Lasers and laser-related equipment. Test methods for laser beam widths, divergence angles and beam propagation ratios. Intrinsic and geometrical laser be
BS EN 572-9:2004 BS EN 572-9:2004. Glass in building. Basic soda lime silicate glass products. Evaluation of conformity/Product standard
BS EN ISO 3656:2002 BS EN ISO 3656:2002. Animal and vegetable fats and oils. Determination of ultraviolet absorbance expressed as specific UV extinction
BS ISO 5758:2002 BS ISO 5758:2002. Cinematography. Labelling of containers for motion-picture film and magnetic material. Minimum information for exchange of materials
BS ISO/IEC 19761:2003 BS ISO/IEC 19761:2003. Software engineering. COSMIC-FFP. A functional size measurement method
BS ISO 2907:2002 BS ISO 2907:2002. Cinematography. Maximum projectable image area on 35 mm motion-picture film. Position and dimensions
BS EN 50392:2004 BS EN 50392:2004. Generic standard to demonstrate the compliance of electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic fields
BS EN 50385:2002 BS EN 50385:2002. Product standard to demonstrate the compliances of radio base stations and fixed terminal stations for wireless telecommunication systems with the basic restrictions
BS ISO 8085-1:2001 BS ISO 8085-1:2001. Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels. Metric series. Specifications. Fittings for socket fusion using heated too
BS EN 50384:2002 BS EN 50384:2002. Product standard to demonstrate the compliance of radio base stations and fixed terminal stations for wireless telecommunication systems with the basic restrictions
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
