BIS Standards Catalogue
BS ISO 10816-3:2009 BS ISO 10816-3:2009. Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Industrial machines with nominal power above 15 kW and nominal spe
BS ISO 7919-3:2009 BS ISO 7919-3:2009. Mechanical vibration. Evaluation of machine vibration by measurements on rotating shafts. Coupled industrial machines
DD ISO/TS 16952-10:2008 DD ISO/TS 16952-10:2008. Technical product documentation. Reference designation system. Power plants
PD ISO/TR 11044:2008 PD ISO/TR 11044:2008. Water quality. Scientific and technical aspects of batch algae growth inhibition tests
PD ISO/TR 1281-1:2008 PD ISO/TR 1281-1:2008. Rolling bearings. Explanatory notes on ISO 281. Basic dynamic load rating and basic rating life
08/30190684 DC 08/30190684 DC. BS ISO 18436-5. Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel. Part 5. Lubricant laboratory technician/ana
PD ISO/TR 13154:2009 PD ISO/TR 13154:2009. Medical electrical equipment. Deployment, implementation and operational guidelines for indentifying febrile humans using a screening thermograph
08/30190670 DC 08/30190670 DC. BS ISO 29681. Pulps. Determination of pH of salted water extracts
08/30190667 DC 08/30190667 DC. BS ISO 17267. Intelligent transport systems (ITS). Navigation system application program interface (API)
08/30190666 DC 08/30190666 DC. BS ISO 7752-1. Cranes. Controls. Layout and characteristics. Part 1. General principles
08/30190664 DC 08/30190664 DC. BS ISO 7752-1. Cranes. Controls. Layout and characteristics. Part 1. General principles
08/30190663 DC 08/30190663 DC. BS ISO 7752-3. Cranes. Controls. Layout and characteristics. Part 3. Tower cranes
08/30190661 DC 08/30190661 DC. BS ISO 7752-3. Cranes. Controls. Layout and characteristics. Part 3. Tower cranes
08/30190636 DC 08/30190636 DC. BS ISO 10961. Gas cylinders. Cylinder bundles. Design, manufacture, identification and testing
08/30190628 DC 08/30190628 DC. BS ISO 21507. Earth-moving machinery. Performance requirements for nonmetallic fuel tanks
08/30190554 DC 08/30190554 DC. BS ISO 10545-16. Ceramic tiles. Part 16. Determination of small colour differences
08/30190551 DC 08/30190551 DC. BS ISO 10545-6. Ceramic tiles. Part 6. Determination of resistance to deep abrasion for unglazed tiles
08/30190548 DC 08/30190548 DC. BS EN ISO 17054. Routine method for analysis of high alloy steel by X-ray fluorescence spectrometry (XRF) by using a near by technique
08/30190530 DC 08/30190530 DC. BS ISO 14487-2. Pulps. Standard water for physical testing. Part 2. Conductivity 40 mS/m to 150 mS/m
09/30190527 DC 09/30190527 DC. BS ISO 26162. Systems to manage terminology, knowledge and content. Design, implementation and maintenance of terminology management systems
08/30190508 DC 08/30190508 DC. BS ISO 12643-4. Graphic technology. Safety requirements for graphic technology equipment and systems. Part 4. Converting equipment and systems
08/30190505 DC 08/30190505 DC. BS ISO 12643-1. Graphic technology. Safety requirements for graphic technology equipment and systems. Part 1. General requirements
08/30190502 DC 08/30190502 DC. BS ISO 18393-1. Thermal insulation products. Determination of ageing by settlement. Part 1. Blown loose fill for ventilated attics
08/30190494 DC 08/30190494 DC. BS ISO 5351. Pulps. Determination of limiting viscosity number in cupri-ethylenediamine (CED) solution
08/30190491 DC 08/30190491 DC. BS ISO 11702. Animal and vegetable fats and oils. Enzymatic determination of total sterols content
09/30190483 DC 09/30190483 DC. BS EN 15767-3. Portable equipment for projecting extinguishing agents supplied by fire fighting pumps. Portable monitors. Part 3. Foam devices
09/30190478 DC 09/30190478 DC. BS EN 1147. Portable ladders for fire service use
PD CEN/TR 15855:2009 PD CEN/TR 15855:2009. Construction products. Assessment of release of dangerous substances. Barriers to trade
09/30190431 DC 09/30190431 DC. BS EN 61190-1-3 AMD1. Attachment materials for electronic assembly. Part 1-3. Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solder for
09/30190385 DC 09/30190385 DC. BS ISO 15765-4. Road vehicles. Diagnostics on Controller Area Networks (CAN). Part 4. Requirements for emissions-related systems
BIP 2181:2008 BIP 2181:2008. Guide to PAS 2050. How to assess the carbon footprint of goods and services
09/30190356 DC 09/30190356 DC. BS EN 60749-40. Semiconductor devices. Mechanical and climatic test methods. Part 40. Board level drop test method using a strain gauge
08/30190352 DC 08/30190352 DC. BS EN ISO 105-D01. Textiles. Tests for colour fastness. Part D01. Colour fastness to dry cleaning using perchloroethylene solvent
09/30190333 DC 09/30190333 DC. BS EN 61400-24. Wind turbines. Part 24. Lightning protection
08/30190311 DC 08/30190311 DC. BS EN 12953-6. Shell boilers. Part 6. Requirements for equipment for the boiler
08/30190305 DC 08/30190305 DC. BS EN 15885. Classification and performance characteristics of techniques for renovation and repair of drains and sewers
08/30190302 DC 08/30190302 DC. BS EN 13044-3. Swap bodies. Marking. Part 3. Other operational marks
08/30190299 DC 08/30190299 DC. BS EN 13044-2. Swap bodies. Marking. Part 2. Markings related to rail operation
08/30190296 DC 08/30190296 DC. BS EN 13044-1. Swap bodies. Marking. Part 1. Markings for identification
BIP 0026:2008 BIP 0026:2008. The complete ISMS Documentation Toolkit CD-ROM and book. A Manager's Guide to Data Security and ISO 27001/ISO 27002
BS EN 50216-11:2008 BS EN 50216-11:2008. Power transformer and reactor fittings. Oil and winding temperature indicators
08/30190191 DC 08/30190191 DC. BS EN 60947-4-3 AMD2. Low-voltage switchgear and controlgear. Part 4-3. Contactors and motor-starters. AC semiconductor motor controllers and contactors for non-motor lo
BS EN 12649:2008 BS EN 12649:2008. Concrete compactors and smoothing machines. Safety
DD IEC/PAS 62588:2008 DD IEC/PAS 62588:2008. Marking and labeling of components, PCBs and PCBAs to identify lead(Pb), Pb-free and other attributes
08/30190030 DC 08/30190030 DC. BS EN 60191-6-21. Mechanical standardization of semiconductor devices. Part 6-21. General rules for the preparation of outline drawings of surface mounted semiconductor
08/30190026 DC 08/30190026 DC. BS EN 60191-6-20. Mechanical standardization of semiconductor devices. Part 6-20. General rules for the preparation of outline drawings of surface mounted semiconductor
08/30189974 DC 08/30189974 DC. BS EN 13245-1. Plastics. Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications. Part 1. Designation of PVC-U profiles
09/30189968 DC 09/30189968 DC. BS EN 13544-1 AMD1. Respiratory therapy equipment. Part 1. Nebulizing systems and their components
08/30189949 DC 08/30189949 DC. BS EN 61558-2-20. Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1100 V. Part 2-20. Particular requirements and test
08/30189945 DC 08/30189945 DC. BS EN 61558-2-12. Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1100 V. Part 2-12. Particular requirements and test
09/30189796 DC 09/30189796 DC. BS EN 61300-3-45. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-45. Examinations and measurements. Attenuatio
09/30189791 DC 09/30189791 DC. BS EN 61300-3-44. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-44. Examinations and measurements. Fibre opti
09/30189756 DC 09/30189756 DC. BS ISO/IEC 18000-3. Information technology. Radio frequency identification for item management. Part 3. Parameters for air interface communications at 13,56 MHz
09/30189744 DC 09/30189744 DC. BS ISO/IEC 24791-5. Information technology. Radio Frequency Identification (RFID) for item management. Software system infrastructure. Part 5. Device interface
08/30189628 DC 08/30189628 DC. BS EN 10257-2. Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables. Part 2. Submarine cables
08/30189625 DC 08/30189625 DC. BS EN 10257-1. Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables Part 1. Land cables
08/30189622 DC 08/30189622 DC. BS EN 10223-8. Steel wire and wire products for fences. Part 8. Welded mesh gabion products
08/30189619 DC 08/30189619 DC. BS EN 10223-7. Steel wire and wire products for fences. Part 7. Steel wire welded panels for fencing
08/30189616 DC 08/30189616 DC. BS EN 10223-6. Steel wire and wire products for fences. Part 6. Steel wire chain link fencing
08/30189613 DC 08/30189613 DC. BS EN 10223-5. Steel wire and wire products for fences. Part 5. Steel wire woven hinged joint and knotted mesh fencing
08/30189610 DC 08/30189610 DC. BS EN 10223-4. Steel wire and wire products for fences. Part 4. Steel wire welded mesh fencing
08/30189607 DC 08/30189607 DC. BS EN 10223-3. Steel wire and wire products for fences. Part 3. Hexagonal steel wire mesh products for engineering purposes
08/30189604 DC 08/30189604 DC. BS EN 10223-2. Steel wire and wire products for fences. Part 2. Hexagonal steel wire netting for agricultural, insulation and fencing purposes
08/30189601 DC 08/30189601 DC. BS EN 10223-1. Steel wire and wire products for fences. Part 1. Zinc and zinc-alloy coated steel barbed wire
08/30189596 DC 08/30189596 DC. BS EN 12846-2. Bitumen and bituminous binders. Determination of the efflux time by the efflux viscometer. Part 2. Cut-back and fluxed bituminous binders
08/30189593 DC 08/30189593 DC. BS EN 12846-1. Bitumen and bituminous binders. Determination of efflux time by the efflux viscometer. Part 1. Bituminous emulsions
08/30189590 DC 08/30189590 DC. BS EN 13074-1. Bitumen and bituminous binders. Recovery of binder from bituminous emulsion or cut-back or fluxed bitumen by evaporation
08/30189584 DC 08/30189584 DC. BS EN 13074-2. Bitumen and bituminous binders. Stabilisation of binder from bituminous emulsion or cut-back or fluxed bitumen after recovery
09/30189572 DC 09/30189572 DC. BS EN 12864 AMD3. Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or equal to 200 mbar, with a capacity of less than or equal to 4
08/30189569 DC 08/30189569 DC. BS EN 594. Timber structures. Test methods. Racking strength and stiffness of timber frame wall panels
08/30189566 DC 08/30189566 DC. BS EN 14825. Air conditioners, liquid chilling packages and heat pumps, with electrically driven compressors, for space heating and cooling. Testing and rating at part l
08/30189563 DC 08/30189563 DC. BS EN 15879-1. Testing and rating of direct exchange ground coupled heat pumps with electrically driven compressors for space heating and/or cooling. Part 1. Direct exch
BIP 2082:2008 BIP 2082:2008. Electrician's Guide to the Building Regulations Part P. 2nd Edition
09/30189522 DC 09/30189522 DC. BS ISO 17331 AMD1. Surface chemical analysis. Chemical methods for the collection of elements from the surface of silicon-wafer working reference materials and their det
08/30189495 DC 08/30189495 DC. BS EN ISO 9117-3. Paints and varnishes. Drying tests. Part 3. Surface-drying test using ballotini
08/30189484 DC 08/30189484 DC. BS EN ISO 9117-2. Paints and varnishes. Drying tests. Part 2. Pressure test for stackability
08/30189427 DC 08/30189427 DC. BS ISO/IEC 29141. Information technology. Tenprint Capture using BioAPI
08/30189276 DC 08/30189276 DC. BS EN 15875. Characterization of waste. Static test for determination of acid potential of sulfidic waste
08/30189270 DC 08/30189270 DC. BS EN 13236. Safety requirements for superabrasive products
BS 4875-5:2009 BS 4875-5:2009. Strength and stability of furniture. Requirements for strength, durability and stability of tables and trolleys for domestic use
08/30189225 DC 08/30189225 DC. BS EN ISO 7783. Paints and varnishes. Determination of water-vapour transmission properties. Cup method
08/30189211 DC 08/30189211 DC. PD 6694-1. Recommendations for the design of structures subject to traffic loading to BS EN 1997-1:2004
09/30189153 DC 09/30189153 DC. BS ISO/IEC 14496-5 AMD15. Information technology. Coding of audio-visual objects. Part 5. Reference software
08/30189150 DC 08/30189150 DC. BS EN 13381-4. Test methods for determining the contribution to the fire resistance of structural members. Part 4. Applied passive protection products to steel members
DD IEC/PAS 62601:2009 DD IEC/PAS 62601:2009. Industrial communication networks. Fieldbus Specifications. WIA-PA communication network and communication profile
08/30189118 DC 08/30189118 DC. BS EN 60317-58. Specifications for particular type of winding wires. Part 58. Polyamide-imide enameled rectangular copper wire, class 220
08/30189113 DC 08/30189113 DC. BS EN 60317-57. Specifications for particular type of winding wires. Part 57. Polyamide-imide enameled round copper wire, class 220
09/30189100 DC 09/30189100 DC. BS EN 60917-2-4. Modular order for the development of mechanical structures for electronic equipment practices. Part 2-4. Sectional specification. Interface coordination
09/30189092 DC 09/30189092 DC. BS EN 60297-3-106. Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482,6 mm (19 in) series. Part 3-106. Adaptation dimensions
08/30188904 DC 08/30188904 DC. BS EN 14605 AMD1. Protective clothing against liquid chemicals. Performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, inc
08/30188901 DC 08/30188901 DC. BS EN 13034 AMD1. Protective clothing against liquid chemicals. Performance requirements for chemical protective suits offering limited protective performance against li
08/30188887 DC 08/30188887 DC. BS EN 933-9. Tests for geometrical properties of aggregates. Part 9. Assessment of fines. Methylene blue test
08/30188882 DC 08/30188882 DC. BS EN 13523-29. Coil coated metals. Test methods. Part 29. Resistance to environmental soiling (Dirt pick-up and stripping)
08/30188879 DC 08/30188879 DC. BS EN 13523-8. Coil coated metals. Test methods. Part 8. Resistance to salt spray (fog)
08/30188842 DC 08/30188842 DC. BS EN 50525-3-41. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 3-41. Cables with special fire performance. Single cor
08/30188839 DC 08/30188839 DC. BS EN 50525-3-31. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 3-31. Cables with special fire performance. Single cor
08/30188836 DC 08/30188836 DC. BS EN 50525-3-21. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 3-21. Cables with special fire performance. Flexible c
08/30188833 DC 08/30188833 DC. BS EN 50525-3-11. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 3-11. Cables with special fire performance. Flexible c
08/30188826 DC 08/30188826 DC. BS EN 50525-2-83. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 2-83. Cables for general applications. Multicore cable
08/30188821 DC 08/30188821 DC. BS EN 50525-2-82. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 2-82. Cables for general applications. Cables with cro
08/30188818 DC 08/30188818 DC. BS EN 50525-2-81. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 2-81. Cables for general applications. Cables with cro
08/30188813 DC 08/30188813 DC. BS EN 50525-2-72. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 2-72. Cables for general applications. Flat divisible
08/30188810 DC 08/30188810 DC. BS EN 50525-2-71. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 2-71. Cables for general applications. Flat tinsel cab
08/30188804 DC 08/30188804 DC. BS EN 50525-2-51. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 2-51. Cables for general applications. Oil resistant c
08/30188799 DC 08/30188799 DC. BS EN 50525-2-42. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 2-42. Cables for general applications. Single core non
08/30188796 DC 08/30188796 DC. BS EN 50525-2-41. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 2-41. Cables for general applications. Single core cables with crosslin
08/30188793 DC 08/30188793 DC. BS EN 50525-2-31. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 2-31. Cables for general applications. Single core non
08/30188788 DC 08/30188788 DC. BS EN 50525-2-22. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 2-22. Cables for general applications. High flexibilit
08/30188786 DC 08/30188786 DC. BS IEC 60613. Electrical, thermal and loading characteristics of X-ray tube assemblies for medical diagnosis
08/30188783 DC 08/30188783 DC. BS EN 50525-2-21. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 2-21. Cables for general applications. Flexible cables
08/30188779 DC 08/30188779 DC. BS EN 50525-2-12. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 2-12. Cables for general applications. Extensible lead
08/30188771 DC 08/30188771 DC. BS EN 50525-2-11. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 2-11. Cables for general applications. Flexible cables
08/30188764 DC 08/30188764 DC. BS EN 50525-1. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 1. General requirements
09/30188761 DC 09/30188761 DC. BS ISO/IEC 29143. Information technology. Automatic identification and data capture techniques. Air interface specification for Mobile RFID interrogators
BS ISO 14726:2008 BS ISO 14726:2008. Ships and marine technology. Identification colours for the content of piping systems
09/30188666 DC 09/30188666 DC. BS 4607-5 AMD3. Non-metallic conduits and fittings for electrical installations. Part 5. Specification for rigid conduits, fittings and components of insulating material
PD CLC/TR 50083-10-1:2009 PD CLC/TR 50083-10-1:2009. Cable networks for television signals, sound signals and interactive services. Guidelines for the implementation of return paths in cable networks
08/30188443 DC 08/30188443 DC. BS EN 15876-1. Electronic fee collection. Conformity evaluation of on board unit and roadside equipment to EN 15509. Part 1. Test suite structure and test purposes
08/30188440 DC 08/30188440 DC. BS EN 1911. Stationary source emissions. Determination of mass concentration of gaseous chlorides expressed as HCl. Standard reference method
08/30188437 DC 08/30188437 DC. BS EN 13766. Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas. Specification
09/30188434 DC 09/30188434 DC. BS EN 598 AMD1. Ductile iron pipes, fittings, accessories and their joints for sewerage applications. Requirements and test methods
BIP 2154:2008 BIP 2154:2008. Good Governance: A risk-based management systems approach to internal control
BS ISO 10071-1:2008 BS ISO 10071-1:2008. Tools for pressing. Ball-lock punches. Ball-lock punches for light duty
09/30188288 DC 09/30188288 DC. BS ISO 21828. Guidance on standards available for preparation and testing of unshaped refractory products
08/30188146 DC 08/30188146 DC. BS EN 10169. Continuously organic coated (coil coated) steel flat products. Technical delivery conditions
08/30188125 DC 08/30188125 DC. BS EN 15269-3. Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements o
09/30187984 DC 09/30187984 DC. BS EN ISO 10808. Nanotechnologies. Characterization of nanoparticles in inhalation exposure chambers for inhalation toxicity testing. Complementary element
DD IEC/PAS 60704-2-15:2008 DD IEC/PAS 60704-2-15:2008. Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Particular requirements for household
PD ISO/IEC TR 15504-6:2008 PD ISO/IEC TR 15504-6:2008. Information technology. Process assessment. An exemplar system life cycle process assessment model
08/30187754 DC 08/30187754 DC. BS EN 1457-2. Chimneys. Clay ceramic flue liners. Part 2. Flue liners operating under wet conditions. Requirements and test methods
08/30187751 DC 08/30187751 DC. BS EN 1457-1. Chimneys - Clay/ceramic flue liners. Part 1. Flue liners operating under dry conditions. Requirements and test methods
08/30187745 DC 08/30187745 DC. BS EN 12566-6. Small wastewater treatment systems for up to 50 PT. Part 6. Prefabricated treatment units for septic tank effluent
09/30187726 DC 09/30187726 DC. BS EN 1870-17 AMD2. Safety of woodworking machines. Circular sawing machines. Part 17. Manual horizontal cutting cross-cut sawing machines with one saw unit (manual radi
08/30187719 DC 08/30187719 DC. BS EN 1493. Vehicle lifts
09/30187715 DC 09/30187715 DC. BS EN 81-2 AMD3. Safety rules for the construction and installation of lifts. Part 2. Hydraulic lifts
09/30187712 DC 09/30187712 DC. BS EN 81-1 AMD3. Safety rules for the construction and installation of lifts. Part 1. Electric lifts
BS ISO 11903:2008 BS ISO 11903:2008. Tools for pressing. Guide pillar mountings
BS ISO 11900-2:2008 BS ISO 11900-2:2008. Tools for pressing. Ball-lock punch retainers. Types C and D, reduced for light duty
BS ISO 8406:2008 BS ISO 8406:2008. Tools for moulding. Mould bases. Round locating elements and spacers
09/30187627 DC 09/30187627 DC. BS ISO 12573. Aircraft. Tubing tolerances. Inch series
08/30187612 DC 08/30187612 DC. BS ISO/IEC 18000-2. Information technology AIDC techniques. RFID for item management. Air interface. Parameters for air interface. Part 2. Parameters for air interface c
08/30187610 DC 08/30187610 DC. BS ISO/IEC 15459-8. Information technology. Automatic identification and data capture techniques. Unique identification. Part 8. Grouping of transport units
09/30187607 DC 09/30187607 DC. BS ISO/IEC 23000-9 AMD1. Information technology. Multimedia application format (MPEGA). Part 9. Digital Multimedia Broadcasting application format
09/30187605 DC 09/30187605 DC. BS ISO/IEC 14496-20 AMD2. Information technology. Coding of audio-visual objects. Part 20. Lightweight Application Scene Representation (LASeR) and Simple Aggregation Fo
ISO/IEC19776-2 : 2008 EDTN2 ISO/IEC19776-2 : 2008 EDTN2. ISO/IEC19776-2 : 2008 Information technology. Computer graphics, image processing and environmental data representation. Extensible 3D (X3D) en
08/30187552 DC 08/30187552 DC. BS EN 13306. Maintenance. Maintenance terminology
08/30187544 DC 08/30187544 DC. BS EN 13765. Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals. Specification
09/30187532 DC 09/30187532 DC. BS EN 14492-2 AMD1. Cranes. Power driven winches and hoists. Part 2. Power driven hoists
09/30187529 DC 09/30187529 DC. BS EN 14492-1 AMD1. Cranes. Power driven winches and hoists. Part 1. Power driven winches
08/30187521 DC 08/30187521 DC. BS EN 593. Industrial valves. Metallic butterfly valves
BS ISO 10907-1:2008 BS ISO 10907-1:2008. Tools for moulding. Locating rings. Locating rings for mounting without thermal insulating sheets in small or medium moulds (types A and B)
BS EN ISO 217:2008 BS EN ISO 217:2008. Paper. Untrimmed sizes. Designation and tolerances for primary and supplementary ranges, and indication of machine direction
DD IEC/PAS 62137-3:2009 DD IEC/PAS 62137-3:2009. Electronics assembly technology. Selection guidance of environmental and endurance test methods for solder joints
09/30187320 DC 09/30187320 DC. BS ISO 12759. Fans. Efficiency classification for fans
BS EN 12850:2009, BS 2000-488:2009 BS EN 12850:2009, BS 2000-488:2009. Bitumen and bituminous binders. Determination of the pH value of bituminous emulsions
BS EN 12849:2009, BS 2000-487:2009 BS EN 12849:2009, BS 2000-487:2009. Bitumen and bituminous binders. Determination of penetration power of bituminous emulsions
BS EN 12848:2009, BS 2000-486:2009 BS EN 12848:2009, BS 2000-486:2009. Bitumen and bituminous binders. Determination of mixing stability with cement of bituminous emulsions
08/30187196 DC 08/30187196 DC. BS EN 1533. Wood and parquet flooring. Determination of bending strength under static load. Test methods
08/30187193 DC 08/30187193 DC. BS EN 15871. Ventilation for buildings. Fire resisting duct sections
09/30187082 DC 09/30187082 DC. BS EN 60958-3 AMD1. Digital audio interface. Part 3. Consumer application
BS EN ISO 20643:2008 BS EN ISO 20643:2008. Mechanical vibration. Hand-held and hand-guided machinery. Principles for evaluation of vibration emission
09/30186956 DC 09/30186956 DC. BS EN 12342 AMD1. Breathing tubes intended for use with anaesthetic apparatus and ventilators
09/30186950 DC 09/30186950 DC. BS EN 1782 AMD1. Tracheal tubes and connectors
09/30186912 DC 09/30186912 DC. BS EN 14908-6. Open data communication in building automation, controls and building management. Control network protocol. Part 6. Application elements
08/30186903 DC 08/30186903 DC. BS EN 1014-4. Wood preservatives. Creosote and creosoted timber. Methods of sampling and analysis. Part 4. Determination of the water-extractable phenols content of creo
08/30186900 DC 08/30186900 DC. BS EN 1014-3. Wood preservatives. Creosote and creosoted timber. Methods of sampling and analysis. Part 3. Determination of the benzo[a]pyrene content of creosote
08/30186896 DC 08/30186896 DC. BS EN 1014-2. Wood preservatives. Creosote and creosoted timber. Methods of sampling and analysis. Part 2. Procedure for obtaining a sample of creosote from creosoted ti
08/30186893 DC 08/30186893 DC. BS EN 1014-1. Wood preservatives. Creosote and creosoted timber. Methods of sampling and analysis. Part 1. Procedure for sampling creosote
08/30186890 DC 08/30186890 DC. BS EN 12490. Durability of wood and wood-based products. Preservative-treated solid wood. Determination of the penetration and retention of creosote in treated wood
09/30186768 DC 09/30186768 DC. BS ISO 6462. Face and shoulder milling cutters with indexable inserts. Dimensions
09/30186728 DC 09/30186728 DC. BS EN 62040-3. Uninterruptible power systems (UPS). Part 3. Method of specifying the performance and test requirements
BIP 0009:2008 BIP 0009:2008. Evidential Weight and Legal Admissibility of Electronic Information. Compliance Workbook for Use with BS 10008
PD ISO/TR 26762:2008 PD ISO/TR 26762:2008. Natural gas. Upstream area. Allocation of gas and condensate
09/30186636 DC 09/30186636 DC. BS EN ISO 9241-210. Ergonomics of human-system interaction. Part 210. Human-centred design for interactive systems
08/30186620 DC 08/30186620 DC. BS EN 13381-7. Test methods for determining the contribution to the fire resistance of structural members. Part 7. Applied protection to timber members
08/30186617 DC 08/30186617 DC. BS EN 13381-6. Test methods for determining the contribution to the fire resistance of structural members. Part 6. Applied protection to concrete filled hollow steel col
08/30186613 DC 08/30186613 DC. BS EN 13381-5. Test methods for determining the contribution to the fire resistance of structural members. Part 5. Applied protection to concrete/profiled sheet steel co
08/30186609 DC 08/30186609 DC. BS EN 13381-3. Test methods for determining the contribution to the fire resistance of structural members. Part 3. Applied protection to concrete members
08/30186605 DC 08/30186605 DC. BS EN 13381-2. Test methods for determining the contribution to the fire resistance of structural members. Part 2. Vertical protective membranes
09/30186600 DC 09/30186600 DC. BS EN 13381-1. Test methods for determining the contribution to the fire resistance of structural members. Part 1. Horizontal protective membranes
DD ISO/TS 22304:2008 DD ISO/TS 22304:2008. Tobacco. Determination of tobacco specific nitrosamines. Method using alkaline dichloromethane extraction
PD ISO/IEC TR 90005:2008 PD ISO/IEC TR 90005:2008. Systems engineering. Guidelines for the application of ISO 9001 to system life cycle processes
BS ISO 16528-1:2007 BS ISO 16528-1:2007. Boilers and pressure vessels. Performance requirements
BIP 0008-3:2008 BIP 0008-3:2008. Evidential Weight and Legal Admissibility of Linking Electronic Identity to Documents. Code of Practice for the Implementation of BS 10008
BIP 0008-2:2008 BIP 0008-2:2008. Evidential Weight and Legal Admissibility of Information Transferred Electronically. Code of Practice for the Implementation of BS 10008
BIP 0008-1:2008 BIP 0008-1:2008. Evidential Weight and Legal Admissibility of Information Stored Electronically. Code of Practice for the Implementation of BS 10008
DD CEN/TS 15867:2009 DD CEN/TS 15867:2009. Advanced technical ceramics. Ceramic composites. Guide to the determination of the degree of misalignment in uniaxial mechanical tests
DD CEN/TS 15866:2009 DD CEN/TS 15866:2009. Advanced technical ceramics. Ceramic composites. Determination of the thermal diffusivity of ceramic fibres
09/30186180 DC 09/30186180 DC. BS EN 61760-3. Surface mounting technology. Part 3. Standard method for the specification of components for through hole reflow (THR) soldering
PD IEC/TR 62002-3:2008 PD IEC/TR 62002-3:2008. Mobile and portable DVB-T/H radio access. Measurement interface
09/30186154 DC 09/30186154 DC. BS ISO 11323. Iron ore and direct-reduced iron. Vocabulary
BS EN 13305:2009 BS EN 13305:2009. Bitumen and bituminous binders. Framework for specification of hard industrial bitumens
BS EN 13304:2009 BS EN 13304:2009. Bitumen and bituminous binders. Framework for specification of oxidised bitumen
BS EN 13303:2009, BS 2000-506:2009 BS EN 13303:2009, BS 2000-506:2009. Bitumen and bituminous binders. Determination of the loss in mass after heating of industrial bitumen
08/30185977 DC 08/30185977 DC. BS EN 438-9. High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates). Part 9. Classification and specifications for alt
09/30185974 DC 09/30185974 DC. BS EN 520 AMD1. Gypsum plasterboards. Definitions, requirements and test methods
09/30185971 DC 09/30185971 DC. BS EN 15283-2 AMD1. Gypsum boards with fibrous reinforcement. Definitions, requirements and test methods. Part 2. Gypsum fibre boards
09/30185968 DC 09/30185968 DC. BS EN 15283-1 AMD1. Gypsum boards with fibrous reinforcement. Definitions, requirements and test methods. Part 1. Gypsum boards with mat reinforcement
09/30185965 DC 09/30185965 DC. BS EN 14566 AMD1. Mechanical fasteners for gypsum plasterboard systems. Definitions, requirements and test methods
09/30185951 DC 09/30185951 DC. BS EN 15889. Fire-fighting hoses. Test methods
08/30185924 DC 08/30185924 DC. BS EN 1071-10. Advanced technical ceramics. Methods of test for ceramic coatings. Part 10. Determination of coating thickness by cross sectioning
09/30185912 DC 09/30185912 DC. BS EN 843-6. Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature. Part 6. Guidance for fractographic investigation
09/30185903 DC 09/30185903 DC. BS EN 14232. Advanced technical ceramics. Terms, definitions and abbreviations
09/30185900 DC 09/30185900 DC. BS EN 1343. Kerbs of natural stone for external paving. Requirements and test methods
09/30185897 DC 09/30185897 DC. BS EN 1341. Slabs of natural stone for external paving. Requirements and test methods
09/30185888 DC 09/30185888 DC. BS EN 13411-8. Terminations for steel wire ropes. Safety. Part 8. Swage terminals and swaging
09/30185830 DC 09/30185830 DC. BS EN 15887. Building hardware. Uncontrolled Door Closing Devices for single action doors. Requirements and test methods
08/30185791 DC 08/30185791 DC. BS EN 15878. Steel static storage systems. Adjustable pallet racking. Terms and definitions
08/30185788 DC 08/30185788 DC. BS EN 15864. Characterisation of waste. Leaching behaviour test for basic characterization. Dynamic monolithic leaching test with continuous leachant renewal under condi
08/30185785 DC 08/30185785 DC. BS EN 15863. Characterisation of waste. Leaching behaviour test for basic characterisation. Dynamic monolithic leaching test with periodic leachant renewal, under fixed
08/30185782 DC 08/30185782 DC. BS EN 15862. Characterization of waste. Compliance leaching test. One stage batch leaching test for monoliths at a fixed liquid to surface area ratio (L/A) for test port
08/30185757 DC 08/30185757 DC. BS EN 1856-2. Chimneys. Requirements for metal chimneys. Part 2. Metal flue liners and connecting flue pipes
BS EN 14419:2009 BS EN 14419:2009. District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Surveillance systems
08/30185648 DC 08/30185648 DC. BS EN 60728-13. Cable networks for television signals, sound signals and interactive services. Part 13. Optical systems for broadcast signal transmissions (TA 5)
08/30185633 DC 08/30185633 DC. BS EN 60728-1-1. Cable networks for television signals, sound signals and interactive services. Part 1-1. RF cabling for two way home networks (TA 5)
BS EN ISO 11553-2:2008 BS EN ISO 11553-2:2008. Safety of machinery. Laser processing machines. Safety requirements for hand-held laser processing devices
BS EN ISO 11553-1:2008 BS EN ISO 11553-1:2008. Safety of machinery. Laser processing machines. General safety requirements
ISO/IEC14165-521 : 2009 EDTN1 ISO/IEC14165-521 : 2009 EDTN1. Information technology. Fibre channel. Part 521: Fabric application interface standard (FAIS)
ISO/IEC/TR12860 : 2009 EDTN1 ISO/IEC/TR12860 : 2009 EDTN1. Information technology - Telecommunications and information exchange between systems - Next Generation Corporate Networks (NGCN) - General
ISO/IEC/TR12861 : 2009 EDTN1 ISO/IEC/TR12861 : 2009 EDTN1. Information technology - Telecommunications and information exchange between systems - Next Generation Corporate Networks (NGCN) - Identifica
ISO/IEC22535 : 2009 EDTN3 ISO/IEC22535 : 2009 EDTN3. Information technology - Telecommunications and information exchange between systems - Corporate telecommunication networks - Tunnelling of QSIG ov
PD ISO/TR 22694:2008 PD ISO/TR 22694:2008. Gas cylinders. Methods for establishing acceptance/ rejection criteria for flaws in seamless steel and aluminium alloy cylinders at time of periodic inspecti
BS EN 62002-2:2008 BS EN 62002-2:2008. Mobile and portable DVB-T/H radio access. Interface conformance testing
09/30185062 DC 09/30185062 DC. BS EN 12966-1 AMD1. Road vertical signs. Variable message traffic signs. Part 1. Product standard
BS ISO 12189:2008 BS ISO 12189:2008. Implants for surgery. Mechanical testing of implantable spinal devices. Fatigue test method for spinal implant assemblies using an anterior support
ISO/IEC24767-2 : 2009 ED1 ISO/IEC24767-2 : 2009 ED1. Information technology. Home network security . Part 2: Internal security services. Secure communication protocol for middleware (SCPM)
ISO/IEC24771 : 2009 EDTN1 ISO/IEC24771 : 2009 EDTN1. ISO/IEC24771 : 2009 Information technology - Telecommunications and information exchange between systems - MAC/PHY standard for ad hoc wireless net
ISO/IEC9834-9 : 2008 ED1 ISO/IEC9834-9 : 2008 ED1. Information technology. Open Systems Interconnection. Procedures for the operation of OSI Registration Authorities. Part 9: Registration of object id
ISO/IEC9834-1 : 2008 EDTN3 ISO/IEC9834-1 : 2008 EDTN3. Information technology. Open Systems Interconnection. Procedures for the operation of OSI Registration Authorities. General procedures and top ar
ISO/IEC10646 AMD5 (12/08) CD-ROM HEADER ISO/IEC10646 AMD5 (12/08) CD-ROM HEADER. ISO/IEC 10646 Information technology - Universal Multiple-Octet Coded Character Set (UCS)
BS EN ISO 10472-6:2008 BS EN ISO 10472-6:2008. Safety requirements for industrial laundry machinery. Ironing and fusing presses
BS EN ISO 10472-5:2008 BS EN ISO 10472-5:2008. Safety requirements for industrial laundry machinery. Flatwork ironers, feeders and folders
BS EN ISO 10472-4:2008 BS EN ISO 10472-4:2008. Safety requirements for industrial laundry machinery. Air dryers
BS EN ISO 15088:2008 BS EN ISO 15088:2008. Water quality. Determination of the acute toxicity of waste water to zebrafish eggs (Danio rerio)
BS EN 50164-5:2009 BS EN 50164-5:2009. Lightning protection components (LPC). Requirements for earth electrode inspection housings and earth electrode seals
DD CEN/TS 15436-3:2009 DD CEN/TS 15436-3:2009. Road service area maintenance equipment. Classification
BS EN 1463-1:2009 BS EN 1463-1:2009. Road marking materials. Retroreflecting road studs. Initial performance requirements
BS ISO 12745:2008 BS ISO 12745:2008. Copper, lead and zinc ores and concentrates. Precision and bias of mass measurement techniques
BS ISO 6914:2008 BS ISO 6914:2008. Rubber, vulcanized or thermoplastic. Determination of ageing characteristics by measurement of stress relaxation in tension
09/30184534 DC 09/30184534 DC. BS ISO/IEC 20000-1. Information technology. Service management. Part 1. Service management system requirements
BS ISO 3858:2008 BS ISO 3858:2008. Rubber compounding ingredients. Carbon black. Determination of light transmittance of toluene extract
09/30184483 DC 09/30184483 DC. BS EN 54-3. Fire detection and fire alarm systems. Part 3. Fire alarm devices. Sounders
PAS 700:2009 PAS 700:2009. Provision of ICT facilities and services in workplaces. Specification
08/30184361 DC 08/30184361 DC. BS ISO 9270-2. 7/24 tapers for spindle noses for automatic tool changers. Part 2. Dimensions and designation of spindle noses of forms J and JF
08/30184358 DC 08/30184358 DC. BS ISO 9270-1. 7/24 taper spindle noses for automatic tool changers. Part 1. Dimensions and designation of spindle noses of forms S and SF
PD ISO/IEC TR 15504-7:2008 PD ISO/IEC TR 15504-7:2008. Information technology. Process assessment. Assessment of organizational maturity
BS EN ISO 1854:2008 BS EN ISO 1854:2008. Whey cheese. Determination of fat content. Gravimetric method (Reference method)
BS EN ISO 7208:2008 BS EN ISO 7208:2008. Skimmed milk, whey and buttermilk. Determination of fat content. Gravimetric method (Reference method)
BS EN ISO 1737:2008 BS EN ISO 1737:2008. Evaporated milk and sweetened condensed milk. Determination of fat content. Gravimetric method (Reference method)
BS EN ISO 7328:2008 BS EN ISO 7328:2008. Milk-based edible ices and ice mixes. Determination of fat content. Gravimetric method (Reference method)
BS EN ISO 2450:2008 BS EN ISO 2450:2008. Cream. Determination of fat content. Gravimetric method (Reference method)
BS EN ISO 8381:2008 BS EN ISO 8381:2008. Milk-based infant foods. Determination of fat content. Gravimetric method (Reference method)
BS EN ISO 1736:2008 BS EN ISO 1736:2008. Dried milk and dried milk products. Determination of fat content. Gravimetric method (Reference method)
09/30184235 DC 09/30184235 DC. BS ISO 10210. Plastics. Preparation of samples for biodegradation testing
09/30184131 DC 09/30184131 DC. BS ISO 29081. Surface chemical analysis. Auger electron spectroscopy. Reporting of methods used for charge control and charge correction
09/30184056 DC 09/30184056 DC. BS ISO 10845-1. Construction procurement. Part 1. Processes, methods and procedures
BS EN ISO 4611:2008 BS EN ISO 4611:2008. Plastics. Determination of the effects of exposure to damp heat, water spray and salt mist
BS EN ISO 2898-2:2008 BS EN ISO 2898-2:2008. Plastics. Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials. Preparation of test specimens and determination of properties (ISO 289
BS ISO 488:2008 BS ISO 488:2008. Milk. Determination of fat content. Gerber butyrometers
BS EN ISO 6683:2008 BS EN ISO 6683:2008. Earth-moving machinery. Seat belts and seat belt anchorages. Performance requirements and tests
BS EN ISO 3450:2008 BS EN ISO 3450:2008. Earth-moving machinery. Braking systems of rubber-tyred machines. Systems and performance requirements and test procedures
DD CLC/TS 61496-3:2008 DD CLC/TS 61496-3:2008. Safety of machinery. Electro-sensitive protective equipment. Particular requirements for active opto-electronic protective devices responsive to diffuse
BS EN ISO 3449:2008 BS EN ISO 3449:2008. Earth-moving machinery. Falling-object protective structures. Laboratory tests and performance requirements
BS EN ISO 7096:2008 BS EN ISO 7096:2008. Earth-moving machinery. Laboratory evaluation of operator seat vibration
BS EN ISO 6682:2008 BS EN ISO 6682:2008. Earth-moving machinery. Zones of comfort and reach for controls
BS EN ISO 3457:2008 BS EN ISO 3457:2008. Earth-moving machinery. Guards. Definitions and requirements
BS EN ISO 3164:2008 BS EN ISO 3164:2008. Earth-moving machinery. Laboratory evaluations of protective structures. Specifications for deflection-limiting volume
BS EN ISO 2860:2008 BS EN ISO 2860:2008. Earth-moving machinery. Minimum access dimensions
09/30183765 DC 09/30183765 DC. BS EN 60695-6-1 AMD1. Fire hazard testing. Part-6-1. Smoke obscuration. General guidance
BS ISO 124:2008 BS ISO 124:2008. Latex, rubber. Determination of total solids content
08/30183528 DC 08/30183528 DC. BS EN 50518-2. Monitoring and alarm receiving centre. Part 2. Requirements for technical facilities
09/30183454 DC 09/30183454 DC. BS EN 1870-14 AMD1. Safety of woodworking machines. Circular sawing machines. Part 14. Vertical panel sawing machines
PD CEN/TR 15367-3:2009 PD CEN/TR 15367-3:2009. Petroleum products. Guide for good housekeeping. Prevention of cross contamination
09/30183439 DC 09/30183439 DC. BS EN ISO 1133-2. Plastics. Determination of the melt volume-flow rate (MVR) and melt mass-flow rate (MFR) of thermoplastics materials. Part 2. Method for materials sens
09/30183435 DC 09/30183435 DC. BS EN ISO 1133-1. Plastics. Determination of the melt volume-flow rate (MVR) and melt mass-flow rate (MFR) of thermoplastics materials. Part 1. Standard method
08/30183430 DC 08/30183430 DC. BS ISO 10924-4. Road vehicles. Circuit breakers. Part 4. Medium circuit breakers with tabs (blade type), Form CB15
08/30183427 DC 08/30183427 DC. BS ISO 10924-1. Road vehicles. Circuit breakers. Part 1. Definitions and general test requirements
09/30183416 DC 09/30183416 DC. BS ISO 21215. Intelligent transport systems. Communications access for land mobiles (CALM). CALM M5
BS ISO 2446:2008 BS ISO 2446:2008. Milk. Determination of fat content
08/30183229 DC 08/30183229 DC. BS ISO/IEC 23003-2. Information technology. MPEG audio technologies. Part 2. Spatial Audio Object Coding (SAOC)
BS EN ISO 707:2008 BS EN ISO 707:2008. Milk and milk products. Guidance on sampling
08/30183175 DC 08/30183175 DC. BS EN 62490-2. Low ESL measuring method. Part 2. Surface mount capacitors for use in electrical and electronic equipment
09/30183147 DC 09/30183147 DC. BS EN 60404-3 AMD2. Magnetic materials. Part 3. Methods of measurement of the magnetic properties of magnetic sheet and strip by means of a single sheet tester
BS EN 4640-002:2009 BS EN 4640-002:2009. Aerospace series. Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder. List of produc
BS EN 60404-8-6:2009 BS EN 60404-8-6:2009. Magnetic materials. Specifications for individual materials. Soft magnetic metallic materials
08/30183125 DC 08/30183125 DC. BS EN 1857. Chimneys. Components. Concrete flue liners
09/30183113 DC 09/30183113 DC. BS EN 81-7. Safety rules for the construction and installation of lifts. Part 7. Rack and pinion lifts
09/30183074 DC 09/30183074 DC. BS ISO 24415-2. Tips for assistive products for walking. Requirements and test methods. Part 2. Durability of tips for crutches
BS 8887-2:2009 BS 8887-2:2009. Design for manufacture, assembly, disassembly and end-of-life processing (MADE). Terms and definitions
BS ISO 18927:2008 BS ISO 18927:2008. Imaging materials. Recordable compact disc systems. Method for estimating the life expectancy based on the effects of temperature and relative humidity
BS ISO 18921:2008 BS ISO 18921:2008. Imaging materials. Compact discs (CD-ROM). Method for estimating the life expectancy based on the effects of temperature and relative humidity
BS ISO 18925:2008 BS ISO 18925:2008. Imaging materials. Optical disc media. Storage practices
BS ISO 10073:2008 BS ISO 10073:2008. Tools for moulding. Support pillars
BS ISO 10069-1:2008 BS ISO 10069-1:2008. Tools for pressing. Elastomer pressure springs. General specification
BS 7933-3:2008, HD 631.3:2008 BS 7933-3:2008, HD 631.3:2008. Electric cables. Accessories. Material characterisation. Fingerprinting for heat shrinkable components for medium voltage applications from
BS EN 10208-2:2009 BS EN 10208-2:2009. Steel pipes for pipelines for combustible fluids. Technical delivery conditions. Pipes of requirement class B
BS EN 10208-1:2009 BS EN 10208-1:2009. Steel pipes for pipelines for combustible fluids. Technical delivery conditions. Pipes of requirement class A
BS EN 3660-019:2009 BS EN 3660-019:2009. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style A, 45°, unsealed, with cable tie
BS EN 3660-018:2009 BS EN 3660-018:2009. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style A, 90°, unsealed, with cable tie
BS EN 3475-417:2009 BS EN 3475-417:2009. Aerospace series. Cables, electrical, aircraft use. Test methods. Fire resistance of cables confined inside a harness
09/30182353 DC 09/30182353 DC. BS EN 12215 AMD1. Coating plants. Spray booths for application of organic liquid coating materials. Safety requirements
09/30182344 DC 09/30182344 DC. BS EN 1953 AMD1. Atomising and spraying equipment for coating materials. Safety requirements
08/30182293 DC 08/30182293 DC. BS EN 746-3 AMD1. Industrial thermoprocessing equipment. Part 3. Safety requirements for the generation and use of atmosphere gases
09/30182290 DC 09/30182290 DC. BS EN 746-1 AMD1. Industrial thermoprocessing equipment. Part 1. Common safety requirements for industrial thermoprocessing equipment
08/30182278 DC 08/30182278 DC. BS EN 1547 AMD1. Industrial thermoprocessing equipment. Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment
09/30182170 DC 09/30182170 DC. BS EN 12978 AMD1. Industrial, commercial and garage doors and gates. Safety devices for power operated doors and gates. Requirements and test methods
08/30182125 DC 08/30182125 DC. BS ISO 10679. Steel. Cast tool steel
08/30182118 DC 08/30182118 DC. BS EN 50397-3. Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV A.C. and not exceeding 36 kV A.C. Part 3. Guide to Use
PAS 97:2009 PAS 97:2009. A specification for mail screening and security
08/30182096 DC 08/30182096 DC. BS ISO 27894. Vacuum technology. Vacuum gauges. Specifications for hot cathode ionization gauges
BS EN ISO 14113:2008 BS EN ISO 14113:2008. Gas welding equipment. Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)
08/30182040 DC 08/30182040 DC. BS EN ISO 1211. Milk. Determination of fat content. Gravimetric method (Reference method)
08/30182014 DC 08/30182014 DC. BS EN 60034-24. Rotating electrical machines. Part 24. Online detection and diagnosis of potential failures at the active parts of rotating electrical machines and of be
BS EN ISO 10524-4:2008 BS EN ISO 10524-4:2008. Pressure regulators for use with medical gases. Low-pressure regulators
09/30181772 DC 09/30181772 DC. BS EN 1837 AMD1. Safety of machinery. Integral lighting of machines
09/30181685 DC 09/30181685 DC. BS EN 13042-3 AMD1. Machines and plants for the manufacture, treatment and processing of hollow glass. Safety requirements. Part 3. IS machines
09/30181679 DC 09/30181679 DC. BS EN 13042-1 AMD1. Machines and plants for the manufacture, treatment and processing of hollow glass. Safety requirements. Part 1. Gob feeder
09/30181661 DC 09/30181661 DC. BS EN 13035-3 AMD1. Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements. Part 3. Cutting machines
09/30181658 DC 09/30181658 DC. BS EN 13157 AMD1. Cranes. Safety. Hand powered lifting equipment
09/30181599 DC 09/30181599 DC. BS EN 62386-210. Digital addressable lighting interface. Part 210. Particular requirements for control gears. Sequencer (device type 9)
09/30181595 DC 09/30181595 DC. BS EN 62386-209. Digital addressable lighting interface. Part 209. Particular requirements for control gear. Colour control (Device Type 8)
09/30181566 DC 09/30181566 DC. BS ISO 29481-1. Building information models. Information delivery manual. Part 1. Methodology and format
BS EN 1594:2009 BS EN 1594:2009. Gas supply systems. Pipelines for maximum operating pressure over 16 bar. Functional requirements
BS 812-124:2009 BS 812-124:2009. Testing aggregates. Method for determination of frost heave
08/30181434 DC 08/30181434 DC. BS EN 12159 AMD1. Builders hoists for persons and materials with vertically guided cages
09/30181371 DC 09/30181371 DC. BS ISO 29541. Solid mineral fuels. Determination of total carbon, hydrogen and nitrogen content. Instrumental method
09/30181333 DC 09/30181333 DC. BS ISO 22621-6. Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar). Polyamide (PA). Part 6. Code
PAS 220:2008 PAS 220:2008. Prerequisite programmes on food safety for food manufacturing
08/30181308 DC 08/30181308 DC. BS ISO 2575 AMD6. Road vehicles. Symbols for controls, indicators and tell-tales
BS EN 61109:2008 BS EN 61109:2008. Insulators for overhead lines. Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1000 V. Definitions, test methods and
09/30181283 DC 09/30181283 DC. BS ISO/IEC 24727-6. Identification cards. Integrated circuit card programming interfaces. Part 6. Registration authority procedures for the authentication protocols for
08/30181280 DC 08/30181280 DC. BS ISO 20022-6. Financial services. UNIversal Financial Industry message scheme. Part 6. Message transport characteristics
09/30181277 DC 09/30181277 DC. BS ISO 10681-2. Road vehicles. Communication on FlexRay. Part 2. Communication layer services
09/30181274 DC 09/30181274 DC. BS ISO 10681-1. Road vehicles. Communication on FlexRay. Part 1. General requirements and use case definitions
09/30181213 DC 09/30181213 DC. BS 2B 100. Procedure for inspection, testing and acceptance of wrought copper alloys
09/30181211 DC 09/30181211 DC. BS 3B 33. Specification for copper-beryllium alloy wire (solution treated and precipitation treated)
09/30181209 DC 09/30181209 DC. BS 3B 32. Specification for copper-beryllium alloy rods and sections (solution treated and precipitation treated)
09/30181207 DC 09/30181207 DC. BS 3B 31. Specification for copper-beryllium alloy strip and foil (solution treated, cold rolled: full hard and precipitation treated)
09/30181205 DC 09/30181205 DC. BS 3B 30. Specification for copper-beryllium alloy strip and foil (solution treated, cold rolled: half hard and precipitation treated)
09/30181203 DC 09/30181203 DC. BS 3B 29. Specification for copper-beryllium alloy strip and foil (solution treated, cold rolled: quarter hard and precipitation treated)
09/30181199 DC 09/30181199 DC. BS 3B 27. Specification for copper-zinc-aluminium- nickel-silicon alloy tube
09/30181197 DC 09/30181197 DC. BS 3B 26. Specification for copper-nickel-silicon alloy rods, sections and parts (solution treated, cold worked and precipitation treated)
09/30181195 DC 09/30181195 DC. BS 3B 25. Specification for copper-nickel-silicon alloy rods, sections, forging stock, forgings and parts (heat treated)
09/30181193 DC 09/30181193 DC. BS 2B 24. Specification for copper-tin-phosphorous alloy rods and sections
09/30181191 DC 09/30181191 DC. BS 2B 23. Specification for copper-aluminium-nickel- iron alloy rods, sections, forging stock and forgings
DD IEC/PAS 62246-2-1:2008 DD IEC/PAS 62246-2-1:2008. Reed contact units. Heavy-duty reed switches. Quality assessment specification
09/30181168 DC 09/30181168 DC. BS EN 1047-2. Secure storage units. Classification and methods of test for resistance to fire. Part 2. Data rooms and data container
ISO/TS27893 : 2009 EDTN1 ISO/TS27893 : 2009 EDTN1. ISO/TS27893 : 2009 Vacuum technology - Vacuum gauges - Evaluation of the uncertainties of results of calibrations by direct comparison with a referen
09/30180963 DC 09/30180963 DC. BS ISO 11852. Rubber. Determination of magnesium content of field and concentrated natural rubber latex by titration
PD IEC/TR 62572-2:2008 PD IEC/TR 62572-2:2008. Fibre optic active components and devices. Reliability standards. Laser module degradation
09/30180872 DC 09/30180872 DC. BS EN 1501-1 AMD2. Refuse collection vehicles and their associated lifting devices. General requirements and safety requirements. Part 1. Rear-end loaded refuse collecti
09/30180869 DC 09/30180869 DC. BS EN 1501-2 AMD1. Refuse collection vehicles and associated lifting devices. General requirements and safety requirements. Part 2. Side loaded refuse collection vehicle
BS EN 50164-6:2009 BS EN 50164-6:2009. Lightning protection components (LPC). Requirements for lightning strike counters
BS 25999-2:2007 (German) BS 25999-2:2007 (German). Business continuity management. Specification (German translation of BS 25999-2:2007)
DD IEC/TS 62312-1-1:2008 DD IEC/TS 62312-1-1:2008. Guideline for synchronization of audio and video. Measurement methods for synchronization of audio and video equipment and systems. General
08/30180629 DC 08/30180629 DC. BS EN 61557-13. Electrical safety in low voltage distribution systems up to 1000 v A.C. and 1500 v D.C. equipment for testing, measuring or monitoring of protective meas
PAS 1188-4:2009 PAS 1188-4:2009. Flood protection products. Specification. Demountable products
PAS 1188-3:2009 PAS 1188-3:2009. Flood protection products. Specification. Building skirt systems
PAS 1188-2:2009 PAS 1188-2:2009. Flood protection products. Specification. Temporary products
PAS 1188-1:2009 PAS 1188-1:2009. Flood protection products. Specification. Building aperture products
09/30180608 DC 09/30180608 DC. BS ISO 10869. Oil of fir needle, Siberian (Abies sibirica Ledeb.)
09/30180605 DC 09/30180605 DC. BS ISO 8897. Oil of juniper berry (Juniperus communis L.)
09/30180587 DC 09/30180587 DC. BS ISO/IEC 24724. Information technology. Automatic identification and data capture techniques. GS1 DataBar bar code symbology specification
BS OHSAS 18002:2008 BS OHSAS 18002:2008. Occupational health and safety management systems. Guidelines for the implementation of OHSAS 18001:2007
BS EN 61290-3-2:2008 BS EN 61290-3-2:2008. Optical amplifiers. Test methods. Noise figure parameters. Electrical spectrum analyzer method
09/30180415 DC 09/30180415 DC. NA to BS EN 1992-1-1 AMD1. Eurocode 2. Design of concrete structures. Part 1-1. General rules and rules for buildings
08/30180398 DC 08/30180398 DC. BS EN 60747-16-5. Semiconductor devices. Part 16-5. Microwave integrated circuits. Oscillators
PAS 500:2008 PAS 500:2008. National specification for travel plans
09/30180393 DC 09/30180393 DC. BS EN ISO 10451. Dentistry. Contents of technical file for dental implant systems
08/30180387 DC 08/30180387 DC. BS 8878. Web accessibility. Building accessible experiences for disabled people. Code of practice
09/30180383 DC 09/30180383 DC. BS EN 61162-450. Maritime navigation and radiocommunication equipment and systems. Digital interfaces. Part 450. Multiple talkers and multiple listeners. Lightweight shi
09/30180307 DC 09/30180307 DC. BS ISO 2004. Natural rubber latex concentrate. Centrifuged or creamed, ammonia-preserved types. Specifications
BS EN 1465:2009 BS EN 1465:2009. Adhesives. Determination of tensile lap-shear strength of bonded assemblies
BS EN 1966:2009 BS EN 1966:2009. Structural adhesives. Characterization of a surface by measuring adhesion by means of the three point bending method
09/30180272 DC 09/30180272 DC. BS EN 934-3. Admixtures for concrete, mortar and grout. Part 3. Admixtures for masonry mortar. Definitions, requirements, conformity, marking and labelling
08/30180209 DC 08/30180209 DC. BS ISO 9211-2. Optics and photonics. Optical coatings. Part 2. Optical properties
08/30180203 DC 08/30180203 DC. BS ISO 9211-1. Optics and photonics. Optical coatings. Part 1. Definitions
ISO27085 : 2009 EDTN1 ISO27085 : 2009 EDTN1. ISO27085 : 2009 Animal feeding stuffs - Determination of calcium, sodium, phosphorus, magnesium, potassium, iron, zinc, copper, manganese, cobalt, molybden
BS EN ISO 2151:2008 BS EN ISO 2151:2008. Acoustics. Noise test code for compressors and vacuum pumps. Engineering method (Grade 2)
09/30179909 DC 09/30179909 DC. BS ISO 22155. Soil quality. Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected ethers. Static headspace method
09/30179882 DC 09/30179882 DC. BS ISO 4107. Commercial vehicles. Wheel hub attachment dimensions
09/30179854 DC 09/30179854 DC. BS EN 13114 AMD1. Tannery machines. Rotating process vessels. Safety requirements
09/30179845 DC 09/30179845 DC. BS EN 13112 AMD1. Tannery machines. Splitting and bandknife shearing machines. Safety requirements
09/30179776 DC 09/30179776 DC. BS EN 12203 AMD1. Footwear, leather and imitation leather goods manufacturing machines. Shoe and leather presses. Safety requirements
09/30179773 DC 09/30179773 DC. BS EN 12387 AMD1. Footwear, leather and imitation leather goods manufacturing machines. Modular shoe repair equipment. Safety requirements
08/30179770 DC 08/30179770 DC. BS EN 12545 AMD1. Footwear, leather and imitation leather goods manufacturing machines. Noise test code. Common requirements
09/30179767 DC 09/30179767 DC. BS EN 12653 AMD2. Footwear, leather and imitation leather manufacturing machines. Nailing machines. Safety requirements
09/30179764 DC 09/30179764 DC. BS EN 931 AMD2. Footwear manufacturing machines. Lasting machines. Safety requirements
09/30179761 DC 09/30179761 DC. BS EN 930 AMD2. Footwear, leather and imitation leather goods manufacturing machines. Roughing, scouring, polishing and trimming machines. Safety requirements
09/30179758 DC 09/30179758 DC. BS EN 12044 AMD1. Footwear, leather and imitation leather goods manufacturing machines. Cutting and punching machines. Safety requirements
08/30179728 DC 08/30179728 DC. BS EN 12321 AMD1. Underground mining machinery. Specification for the safety requirements of armoured face conveyors
08/30179725 DC 08/30179725 DC. BS EN 1889-2 AMD1. Machines for underground mines. Mobile machines working underground. Safety. Rail locomotives
09/30179627 DC 09/30179627 DC. BS ISO 4007. Personal protective equipment. Eye and face protection. Vocabulary
09/30179580 DC 09/30179580 DC. BS EN ISO 29664. Plastics. Artificial weathering including acidic deposition
09/30179503 DC 09/30179503 DC. BS ISO 29301. Microbeam analysis. Analytical transmission electron microscopy. Methods for calibrating image magnification by using reference materials giving a periodic
BS ISO 16565:2008 BS ISO 16565:2008. Rubber. Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers
BS EN 3475-810:2009 BS EN 3475-810:2009. Aerospace series. Cables, electrical, aircraft use. Test methods. Structural return loss
BS EN 3475-809:2009 BS EN 3475-809:2009. Aerospace series. Cables, electrical, aircraft use. Test methods. Resistance unbalance
BS EN 3475-802:2009 BS EN 3475-802:2009. Aerospace series. Cables, electrical, aircraft use. Test methods. Capacitance unbalance
BS EN 3375-009:2009 BS EN 3375-009:2009. Aerospace series. Cable, electrical, for digital data transmission. Single braid. CAN Bus. 120 Ohms. Type WX. Product standard
BS EN 3373-011:2009 BS EN 3373-011:2009. Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors. Terminal lugs, ring shaped, nickel plated, for crimping on copper cond
BS EN 3373-010:2009 BS EN 3373-010:2009. Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors. Terminal lugs, ring shaped, tin plated, for crimping on copper conduct
BS EN 2997-013:2009 BS EN 2997-013:2009. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire- resistant, operating temperatures -65 °C to 175 °C co
BS EN 2997-012:2009 BS EN 2997-012:2009. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire- resistant, operating temperatures -65 °C to 175 °C co
BS EN 2854-003:2009 BS EN 2854-003:2009. Aerospace series. Cables, electrical for general purpose. Cross sections equal to and greater than 9 mm2. Operating temperatures between -55 °C and 260 °C. Pro
BS EN 4626-201:2009 BS EN 4626-201:2009. Aerospace series. Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule. Operating temperatures -65 °C to 125
BS EN 3155-069:2009 BS EN 3155-069:2009. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, coaxial, size 16, female, type D, solder, class P. Product standard
BS EN 3155-068:2009 BS EN 3155-068:2009. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, coaxial, size 08, female, type D, solder, class R. Product standard
BS EN 3155-067:2009 BS EN 3155-067:2009. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, coaxial, size 08, male, type D, solder, class R. Product standard
BS EN 4499:2009 BS EN 4499:2009. Aerospace series. Screws, 100° countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with alumini
BS EN 4604-006:2009 BS EN 4604-006:2009. Aerospace series. Cable, electrical, for signal transmission. Cable, coaxial, 50 ohm, 200 °C, type WM. Product standard
BS EN 4604-003:2009 BS EN 4604-003:2009. Aerospace series. Cable, electrical, for signal transmission. Cable, coaxial, 50 ohm, 200 °C, type WZ. Product standard
BS EN 3155-001:2009 BS EN 3155-001:2009. Aerospace series. Electrical contacts used in elements of connection. Technical specification
BS EN 15558:2009 BS EN 15558:2009. Fertilizers. Determination of nitric and ammoniacal nitrogen according to Ulsch
BS EN 15479:2009 BS EN 15479:2009. Fertilizers. Spectrophotometric determination of biuret in urea
BS EN 15478:2009 BS EN 15478:2009. Fertilizers. Determination of total nitrogen in urea
BS EN 15477:2009 BS EN 15477:2009. Fertilizers. Determination of the water-soluble potassium content
BS EN 15476:2009 BS EN 15476:2009. Fertilizers. Determination of nitric and ammoniacal nitrogen according to Devarda
BS EN 15475:2009 BS EN 15475:2009. Fertilizers. Determination of ammoniacal nitrogen
PD IEC/TR 60909-2:2008 PD IEC/TR 60909-2:2008. Short-circuit currents in three-phase a.c. systems. Data of electrical equipment for short-circuit current calculations
08/30179150 DC 08/30179150 DC. BS 7958. Closed-circuit television (CCTV). Management and operation. Code of practice
09/30179135 DC 09/30179135 DC. BS EN 61249-2-42. Materials for printed boards and other interconnecting structures. Part 2-42. Reinforced base materials clad and unclad. Brominated Epoxide non-woven /
BS EN 50521:2008 BS EN 50521:2008. Connectors for photovoltaic systems. Safety requirements and tests
08/30179080 DC 08/30179080 DC. BS EN 61666. Industrial systems, installations and equipment and industrial products. Identification of terminals within a system
PD IEC/TR 62513:2008 PD IEC/TR 62513:2008. Safety of machinery. Guidelines for the use of communication systems in safety-related applications
BS EN 12808-1:2008 BS EN 12808-1:2008. Grouts for tiles. Determination of chemical resistance of reaction resin mortars
DD IEC/TS 62396-3:2008 DD IEC/TS 62396-3:2008. Process management for avionics. Atmospheric radiation effects. Optimising system design to accommodate the single event effects (SEE) of atmospheric rad
09/30178949 DC 09/30178949 DC. BS ISO 4802-2. Glassware. Hydrolytic resistance of the interior surfaces of glass containers. Part 2. Determination by flame spectrometry and classification
09/30178946 DC 09/30178946 DC. BS ISO 4802-1. Glassware. Hydrolytic resistance of the interior surfaces of glass containers. Part 1. Determination by titration method and classification
09/30178870 DC 09/30178870 DC. BS ISO 10638. Raw rubber, latex, rubber compounds and rubber products. Identification of antidegradants by gas chromatography/mass spectrometry
PD CEN/TR 13932:2009 PD CEN/TR 13932:2009. Rotodynamic pumps. Recommendations for fitting of inlet and outlet on piping
PD CEN/TR 13931:2009 PD CEN/TR 13931:2009. Rotodynamic pumps. Forces and moments on flanges. Centrifugal, mixed flow and axial flow horizontal and vertical shafts pumps
PD CEN/TR 13930:2009 PD CEN/TR 13930:2009. Rotodynamic pumps. Design of pump intakes. Recommendations for installation of pumps
09/30178813 DC 09/30178813 DC. BS EN 1870-13 AMD1. Safety of woodworking machines. Circular sawing machines. Part 13. Horizontal beam panel sawing machines
09/30178783 DC 09/30178783 DC. BS EN 62509. Performance and functioning of photovoltaic battery charge controllers
BS 2SP 90:2008 BS 2SP 90:2008. Specification for corrosion-resisting steel split cotter pins for aircraft. Inch series
BS ISO 29783-1:2008 BS ISO 29783-1:2008. Prosthetics and orthotics. Vocabulary. Normal gait
BS ISO 29782:2008 BS ISO 29782:2008. Prostheses and orthoses. Factors to be considered when specifying a prosthesis for a person who has had a lower limb amputation
BS ISO 29781:2008 BS ISO 29781:2008. Prostheses and orthoses. Factors to be included when describing physical activity of a person who has had a lower limb amputation(s) or who has a deficiency of a l
BS EN 14917:2009 BS EN 14917:2009. Metal bellows expansion joints for pressure applications
08/30178569 DC 08/30178569 DC. BS ISO 27892. Vacuum technology. Turbomolecular pumps. Measurement of rapid shutdown torque
BS EN ISO 11554:2008 BS EN ISO 11554:2008. Optics and photonics. Lasers and laser-related equipment. Test methods for laser beam power, energy and temporal characteristics
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
