BIS Standards Catalogue
BS EN ISO 11252:2008 BS EN ISO 11252:2008. Lasers and laser-related equipment. Laser device. Minimum requirements for documentation
BS EN ISO 11145:2008 BS EN ISO 11145:2008. Optics and photonics. Lasers and laser-related equipment. Vocabulary and symbols
BS EN ISO 3471:2008 BS EN ISO 3471:2008. Earth-moving machinery. Roll-over protective structures. Laboratory tests and performance requirements
08/30178500 DC 08/30178500 DC. BS EN 61169-40. Radio-frequency connectors. Part 40. Sectional specification for 2.4 series R.F connectors
DD IEC/PAS 61169-40:2008 DD IEC/PAS 61169-40:2008. Radio-frequency connectors. Sectional specification for 2.4 series R.F connectors
ISO/IEC25434 : 2008 EDTN3 ISO/IEC25434 : 2008 EDTN3. ISO/IEC25434 : 2008 Information technology Data interchange on 120 mm and 80 mm optical disk using +R DL format Capacity: 8,55 Gbytes and 2,66 Gbyt
ISO/IEC11976 : 2008 EDTN1 ISO/IEC11976 : 2008 EDTN1. ISO/IEC11976 : 2008 Information technology - Data interchange on 130 mm rewritable and write-once-read-many ultra density optical (UDO) disk cartri
DD CEN/TS 15810:2008 DD CEN/TS 15810:2008. Graphical symbols for use on integrated building automation equipment
09/30178391 DC 09/30178391 DC. BS EN 12779 AMD1. Safety of woodworking machines. Chip and dust extraction systems with fixed installation. Safety related performances and safety requirements
09/30178388 DC 09/30178388 DC. BS EN 12750 AMD1. Safety of woodworking machines. Four-sided moulding machines
09/30178385 DC 09/30178385 DC. BS EN 1218-5 AMD1. Safety of woodworking machines. Tenoning machines. Part 5. One side profiling machines with fixed table and feed rollers or feed chain
09/30178372 DC 09/30178372 DC. BS EN 1218-1 AMD1. Safety of woodworking machines. Tenoning machines. Part 1. Single end tenoning machines with sliding table
09/30178369 DC 09/30178369 DC. BS EN 940 AMD1. Safety of woodworking machines. Combined woodworking machines
09/30178366 DC 09/30178366 DC. BS EN 848-3 AMD1. Safety of woodworking machines. One side moulding machines with rotating tools. Part 3. Numerically controlled (NC) boring and routing machines
09/30178363 DC 09/30178363 DC. BS EN 848-2 AMD1. Safety of woodworking machines. One side moulding machines with rotating tool. Part 2. Single spindle hand fed/integrated fed routing machines
09/30178359 DC 09/30178359 DC. BS EN 848-1 AMD1. Safety of woodworking machines. One side moulding machines with rotating tools. Part 1. Single spindle vertical moulding machines
09/30178356 DC 09/30178356 DC. BS EN 1870-17 AMD1. Safety of woodworking machines. Circular sawing machines. Part 17. Manual horizontal cutting cross-cut sawing machines with one saw unit (manual radi
09/30178353 DC 09/30178353 DC. BS EN 1870-16 AMD1. Safety of woodworking machines. Circular sawing machines. Part 16. Double mitre sawing machines for V-cutting
09/30178349 DC 09/30178349 DC. BS EN 1870-15 AMD1. Safety of woodworking machines. Circular sawing machines. Part 15. Multiblade cross-cut sawing machines with integrated feed of the workpiece and man
09/30178346 DC 09/30178346 DC. BS EN 1870-12 AMD1. Safety of woodworking machines. Circular sawing machines. Part 12. Pendulum cross-cut sawing machines
09/30178343 DC 09/30178343 DC. BS EN 1870-11 AMD1. Safety of woodworking machines. Circular sawing machines. Part 11. Semi-automatic and automatic horizontal cross-cut sawing machines with one saw uni
09/30178340 DC 09/30178340 DC. BS EN 1870-10 AMD1. Safety of woodworking machines. Circular sawing machines. Part 10. Single blade automatic and semi-automatic up-cutting cross-cut sawing machines
09/30178337 DC 09/30178337 DC. BS EN 1870-9 AMD1. Safety of woodworking machines. Circular sawing machines. Part 9. Double blade circular sawing machines for cross-cutting with integrated feed and wit
09/30178334 DC 09/30178334 DC. BS EN 1870-8 AMD1. Safety of woodworking machines. Circular sawing machines. Part 8. Single blade edging circular rip sawing machines with power driven saw unit and manu
09/30178331 DC 09/30178331 DC. BS EN 1870-7 AMD1. Safety of woodworking machines. Circular sawing machines. Part 7. Single blade log sawing machines with integrated feed table and manual loading and/o
09/30178328 DC 09/30178328 DC. BS EN 1870-6 AMD1. Safety of woodworking machines. Circular sawing machines. Part 6. Circular sawing machines for firewood and dual purpose circular sawing machines for
09/30178325 DC 09/30178325 DC. BS EN 1870-5 AMD1. Safety of woodworking machines. Circular sawing machines. Part 5. Circular sawbenches/up-cutting cross-cut sawing machines
09/30178322 DC 09/30178322 DC. BS EN 1870-4 AMD1. Safety of woodworking machines. Circular sawing machines. Part 4. Multiblade rip sawing machines with manual loading and/or unloading
08/30178313 DC 08/30178313 DC. BS ISO 11745. Brazing for aerospace applications. Qualification test of brazers and brazing operators. Brazing of metallic components
09/30178310 DC 09/30178310 DC. BS EN 1807 AMD1. Safety of woodworking machines. Band sawing machines
09/30178296 DC 09/30178296 DC. BS EN 860 AMD1. Safety of woodworking machines. One side thickness planing machines
09/30178293 DC 09/30178293 DC. BS EN 859 AMD1. Safety of woodworking machines. Hand fed surface planning machines
BS ISO 1891:2009 BS ISO 1891:2009. Fasteners. Terminology
09/30178203 DC 09/30178203 DC. BS EN 61193-3. Quality assessment systems. Part 3. Selection and use of sampling plans for printed board and laminate end-product and in-process auditing
BS 6365:2008 BS 6365:2008. Specification for precision vernier depth gauges
08/30178073 DC 08/30178073 DC. BS ISO 7117. Motorcycles. Measurement method for determining maximum speed
BS EN 62439:2008 BS EN 62439:2008. High availability automation networks
ISO16100-5 : 2009 EDTN1 ISO16100-5 : 2009 EDTN1. ISO 16100-5 Industrial automation systems and integration - Manufacturing software capability profiling for interoperability . Part 5: Methodology for
09/30178059 DC 09/30178059 DC. BS ISO 7176-9. Wheelchairs. Part 9. Climatic tests for electric wheelchairs
08/30178019 DC 08/30178019 DC. BS EN 13707 AMD2. Flexible sheets for waterproofing. Reinforced bitumen sheets for roof waterproofing. Definitions and characteristics
09/30178013 DC 09/30178013 DC. BS EN 1012-2 AMD1. Compressors and vacuum pumps. Safety requirements. Part 2. Vacuum pumps
DD IEC/PAS 62562:2008 DD IEC/PAS 62562:2008. Cavity resonator method to measure the complex permittivity of low-loss dielectric plates
PD CEN/TR 15809:2008 PD CEN/TR 15809:2008. Characterization of sludges. Hygienic aspects. Treatments
BS 817:2008 BS 817:2008. Specification for surface plates
09/30177741 DC 09/30177741 DC. BS ISO 29061-1. Road vehicles. Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems. Part 1. Vehic
09/30177728 DC 09/30177728 DC. BS ISO 4513. Road vehicles. Visibilty. Method for establishment of eyellipses for driver's eye location
BS 1044-1:2008 BS 1044-1:2008. Specification for gauge blanks. Plug, ring and calliper gauges
BS 6468:2008 BS 6468:2008. Specification for depth micrometers
BS 959:2008 BS 959:2008. Specification for internal micrometers (including stick micrometers)
DD ISO/TS 29041:2008 DD ISO/TS 29041:2008. Gas mixtures. Gravimetric preparation. Mastering correlations in composition
09/30177494 DC 09/30177494 DC. BS EN 14238 AMD1. Cranes. Manually controlled load manipulating devices
PD CEN/TR 81-10:2008 PD CEN/TR 81-10:2008. Safety rules for the construction and installation of lifts. Basics and interpretations. System of the EN 81 series of standards
09/30177484 DC 09/30177484 DC. BS EN ISO 18274. Welding consumables. Wire and strip electrodes, wires and rods for fusion welding of nickel and nickel alloys. Classification
BS EN 50131-3:2009 BS EN 50131-3:2009. Alarm systems. Intrusion and hold-up systems. Control and indicating equipment
08/30177412 DC 08/30177412 DC. BS ISO/IEC 15961-2. Information technology. Radio frequency identification (RFID) for item management. Data protocol. Part 2. Data encoding rules and logical memory func
08/30177409 DC 08/30177409 DC. BS ISO/IEC 15961-1. Information technology. Radio frequency (RFID) for item management. Data protocol. Part 1. Application interface
ISO/IEC23000-6 : 2009 EDTN1 ISO/IEC23000-6 : 2009 EDTN1. Information technology - Multimedia application format (MPEG-A). Part 6: Professional archival application format
08/30177295 DC 08/30177295 DC. BS ISO 14341. Welding consumables. Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels. Classification
BS EN ISO 13850:2008 BS EN ISO 13850:2008. Safety of machinery. Emergency stop. Principles for design
09/30177189 DC 09/30177189 DC. BS ISO 10225. Gas welding equipment. Marking for equipment used for gas welding, cutting and allied processes
BS EN ISO 13753:2008 BS EN ISO 13753:2008. Mechanical vibration and shock. Hand-arm vibration. Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm sy
BS EN 61857-22:2008 BS EN 61857-22:2008. Electrical insulation systems. Procedures for thermal evaluation. Specific requirements for encapsulated-coil model. Wire-wound electrical insulation system (E
BS EN 61858:2008 BS EN 61858:2008. Electrical insulation systems. Thermal evaluation of modifications to an established wire-wound EIS
PD CLC/TR 50126-3:2008 PD CLC/TR 50126-3:2008. Railway applications. The specification and demonstration of reliability, availability, maintainability and safety (RAMS). Guide to the application of EN
09/30177067 DC 09/30177067 DC. BS EN 61097-14. Global maritime distress and safety system (GMDSS). Part 14. AIS search and rescue transmitter (AIS-SART). Operational and performance requirements, meth
DD CEN ISO/TS 21003-7:2008 DD CEN ISO/TS 21003-7:2008. Multilayer piping systems for hot and cold water installations inside buildings. Guidance for the assessment of conformity
BS 6396:2008 BS 6396:2008. Electrical systems in office furniture and educational furniture. Specification
BS EN ISO 14630:2008 BS EN ISO 14630:2008. Non-active surgical implants. General requirements
DD IEC/TS 62396-4:2008 DD IEC/TS 62396-4:2008. Process management for avionics. Atmospheric radiation effects. Guidelines for designing with high voltage aircraft electronics and potential single even
DD IEC/TS 62396-2:2008 DD IEC/TS 62396-2:2008. Process management for avionics. Atmospheric radiation effects. Guidelines for single event effects testing for avionics systems
DD IEC/TS 62396-5:2008 DD IEC/TS 62396-5:2008. Process management for avionics. Atmospheric radiation effects. Guidelines for assessing thermal neutron fluxes and effects in avionics systems
09/30176966 DC 09/30176966 DC. BS EN ISO 5667-13. Water quality. Sampling. Part 13. Guidance on sampling of sludges from sewage and water-treatment works
08/30176954 DC 08/30176954 DC. BS ISO 28279. Sintered metal materials. Determination of cleanliness of metallic-powder parts
08/30176943 DC 08/30176943 DC. BS ISO 23519. Sintered metal materials, excluding hardmetals. Measurement of surface roughness
DD CEN/TS 15790:2008 DD CEN/TS 15790:2008. Animal feeding stuffs. PCR typing of probiotic strains of Saccharomyces cerevisiae (yeast)
08/30176807 DC 08/30176807 DC. BS EN 12111 AMD1. Tunnelling machines. Road headers, continuous miners and impact rippers. Safety requirements
BS EN 61883-8:2009 BS EN 61883-8:2009. Consumer audio/video equipment. Digital interface. Transmission of ITU-R BT.601 style digital video data
08/30176616 DC 08/30176616 DC. BS EN 54-1. Fire detection and fire alarm systems. Part 1. Introduction
PD 8010-3:2009 PD 8010-3:2009. Code of practice for pipelines. Steel pipelines on land. Guide to the application of pipeline risk assessment to proposed developments in the vicinity of major accident
09/30176561 DC 09/30176561 DC. BS EN ISO 5667-23. Water quality. Sampling. Part 23. Determination of priority pollutants in surface water using passive sampling
09/30176542 DC 09/30176542 DC. BS EN ISO 30013. Rubber and thermoplastics hoses. Methods of exposure to laboratory light sources. Determination of changes in colour, appearance and other physical prop
08/30176520 DC 08/30176520 DC. BS ISO 27895. Vacuum technology. Valves. Leak test
09/30176512 DC 09/30176512 DC. BS EN 62508. Guidance on human aspects of dependability
BS EN 14214:2008 BS EN 14214:2008. Automotive fuels. Fatty acid methyl esters (FAME) for diesel engines. Requirements and test methods
DD IEC/TS 61850-80-1:2009 DD IEC/TS 61850-80-1:2009. Communication networks and systems for power utility automation. Guideline to exchanging information from a CDC-based data model using IEC 60870-5-
08/30176368 DC 08/30176368 DC. BS EN 60601-2-28. Medical electrical equipment. Part 2-28. Particular requirements for basic safety and essential performance of X-ray tube assemblies for medical diagno
OHSAS 18002:2008 OHSAS 18002:2008. Occupational health and safety management systems. Guidelines for the implementation of OHSAS 18001:2007
09/30176303 DC 09/30176303 DC. BS ISO 16431. Hydraulic fluid power. Assembled systems. System clean-up procedures and verification of cleanliness
BS ISO 15862:2009 BS ISO 15862:2009. Space systems. Launch-vehicle-to-spacecraft flight environments telemetry data processing
BS EN 61784-1:2008 BS EN 61784-1:2008. Industrial communication networks. Profiles. Fieldbus profiles
08/30176097 DC 08/30176097 DC. BS EN 14010 AMD1. Safety of machinery. Equipment for power driven parking of motor vehicles. Safety and EMC requirements for design, manufacturing, erection and commissi
08/30176094 DC 08/30176094 DC. BS EN 1495 AMD2. Lifting platforms. Mast climbing work platforms
08/30176091 DC 08/30176091 DC. BS EN 1808 AMD1. Safety requirements on suspended access equipment. Design calculations, stability criteria, construction. Tests
08/30176085 DC 08/30176085 DC. BS EN 1756-2 AMD1. Tail lifts. Platform lifts for mounting on wheeled vehicles. Safety requirements. Part 2. Tail lifts for passengers
08/30176079 DC 08/30176079 DC. BS EN 1570 AMD2. Safety requirements for lifting tables
BS EN 61158-5-20:2008 BS EN 61158-5-20:2008. Industrial communication networks. Fieldbus specifications. Application layer service definition. Type 20 elements
BS EN 61158-5-19:2008 BS EN 61158-5-19:2008. Industrial communication networks. Fieldbus specifications. Application layer service definition. Type 19 elements
BS EN 61158-5-18:2008 BS EN 61158-5-18:2008. Industrial communication networks. Fieldbus specifications. Application layer service definition. Type 18 elements
BS EN 61158-5-17:2008 BS EN 61158-5-17:2008. Industrial communication networks. Fieldbus specifications. Application layer service definition. Type 17 elements
BS EN 61158-5-16:2008 BS EN 61158-5-16:2008. Industrial communication networks. Fieldbus specifications. Application layer service definition. Type 16 elements
BS EN 61158-5-15:2008 BS EN 61158-5-15:2008. Industrial communication networks. Fieldbus specifications. Application layer service definition. Type 15 elements
BS EN 61158-5-14:2008 BS EN 61158-5-14:2008. Industrial communication networks. Fieldbus specifications. Application layer service definition. Type 14 elements
BS EN 61158-5-13:2008 BS EN 61158-5-13:2008. Industrial communication networks. Fieldbus specifications. Application layer service definition. Type 13 elements
BS EN 61158-5-12:2008 BS EN 61158-5-12:2008. Industrial communication networks. Fieldbus specifications. Application layer service definition. Type 12 elements
BS EN 61158-5-11:2008 BS EN 61158-5-11:2008. Industrial communication networks. Fieldbus specifications. Application layer service definition. Type 11 elements
BS EN 61158-5-10:2008 BS EN 61158-5-10:2008. Industrial communication networks. Fieldbus specifications. Application layer service definition. Type 10 elements
BS EN 61158-4-1:2008 BS EN 61158-4-1:2008. Industrial communication networks. Fieldbus specifications. Data-link layer protocol specification. Type 1 elements
BS EN 61158-3-19:2008 BS EN 61158-3-19:2008. Industrial communication networks. Fieldbus specifications. Data-link layer service definition. Type 19 elements
BS EN 61158-3-18:2008 BS EN 61158-3-18:2008. Industrial communication networks. Fieldbus specifications. Data-link layer service definition. Type 18 elements
BS EN 61158-3-17:2008 BS EN 61158-3-17:2008. Industrial communication networks. Fieldbus specifications. Data-link layer service definition. Type 17 elements
BS EN 61158-3-16:2008 BS EN 61158-3-16:2008. Industrial communication networks. Fieldbus specifications. Data-link layer service definition. Type 16 elements
BS EN 61158-3-14:2008 BS EN 61158-3-14:2008. Industrial communication networks. Fieldbus specifications. Data-link layer service definition. Type 14 elements
BS EN 61158-3-13:2008 BS EN 61158-3-13:2008. Industrial communication networks. Fieldbus specifications. Data-link layer service definition. Type 13 elements
BS EN 61158-3-12:2008 BS EN 61158-3-12:2008. Industrial communication networks. Fieldbus specifications. Data-link layer service definition. Type 12 elements
BS EN 61158-3-11:2008 BS EN 61158-3-11:2008. Industrial communication networks. Fieldbus specifications. Data-link layer service definition. Type 11 elements
BS EN 61158-3-8:2008 BS EN 61158-3-8:2008. Industrial communication networks. Fieldbus specifications. Data-link layer service definition. Type 8 elements
BS EN 61158-3-7:2008 BS EN 61158-3-7:2008. Industrial communication networks. Fieldbus specifications. Data-link layer service definition. Type 7 elements
BS EN 61158-3-4:2008 BS EN 61158-3-4:2008. Industrial communication networks. Fieldbus specifications. Data-link layer service definition. Type 4 elements
BS EN 61158-3-3:2008 BS EN 61158-3-3:2008. Industrial communication networks. Fieldbus specifications. Data-link layer service definition. Type 3 elements
BS EN 61158-3-2:2008 BS EN 61158-3-2:2008. Industrial communication networks. Fieldbus specifications. Data-link layer service definition. Type 2 elements
BS EN 61158-3-1:2008 BS EN 61158-3-1:2008. Industrial communication networks. Fieldbus specifications. Data-link layer service definition. Type 1 elements
BS EN 61158-2:2008 BS EN 61158-2:2008. Industrial communication networks. Fieldbus specifications. Physical layer specification and service definition
09/30175820 DC 09/30175820 DC. BS ISO 22621-5. Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar). Polyamide (PA). Part 5. Fitne
BS ISO 1112:2009 BS ISO 1112:2009. Horology. Functional and non-functional jewels
09/30175758 DC 09/30175758 DC. BS ISO 28238. Compression and injection moulds. Components for gating systems. Vocabulary
BS ISO/IEC 11695-3:2008 BS ISO/IEC 11695-3:2008. Identification cards. Optical memory cards. Holographic recording method. Optical properties and characteristics
BS ISO/IEC 11695-2:2008 BS ISO/IEC 11695-2:2008. Identification cards. Optical memory cards. Holographic recording method. Dimensions and location of accessible optical area
BS ISO/IEC 11695-1:2008 BS ISO/IEC 11695-1:2008. Identification cards. Optical memory cards. Holographic recording method. Physical characteristics
09/30175729 DC 09/30175729 DC. BS ISO 28560-3. Information and documentation. RFID in libraries. Part 3. Fixed length encoding
09/30175726 DC 09/30175726 DC. BS ISO 28560-2. Information and documentation. RFID in libraries. Part 2. Encoding based on ISO/IEC 15962
09/30175723 DC 09/30175723 DC. BS ISO 28560-1. Information and documentation. RFID in libraries. Part 1. General requirements and data elements
09/30175700 DC 09/30175700 DC. BS EN 60601-2-46. Medical electrical equipment. Part 2-46. Particular requirements for basic safety and essential performance of operating tables
BS EN 1736:2008 BS EN 1736:2008. Refrigerating systems and heat pumps. Flexible pipe elements, vibration isolators, expansion joints and non-metallic tubes. Requirements, design and installation
BS EN 15492:2008 BS EN 15492:2008. Ethanol as a blending component for petrol. Determination of inorganic chloride and sulfate content. Ion chromatographic method
08/30175546 DC 08/30175546 DC. BS ISO/IEC 19785-4. Information technology. Common biometric exchange formats framework. Part 4. Security block format specifications
08/30175530 DC 08/30175530 DC. BS ISO/IEC 29109-1. Information technology. Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794. Part 1. Generalized conforma
BS EN 50514:2008 BS EN 50514:2008. Audio, video and information technology equipment. Routine electrical safety testing in production
BS ISO/IEC 9541-4:2009 BS ISO/IEC 9541-4:2009. Information technology. Font information interchange. Harmonization to open font format
09/30175272 DC 09/30175272 DC. BS ISO 17874-3. Remote handling devices for radioactive materials. Part 3. Electrical master-slave manipulators
ISO/IEC23000-8 : 2008 EDTN1 ISO/IEC23000-8 : 2008 EDTN1. ISO/IEC23000 : 2008 Information technology - Multimedia application format (MPEG-A). Part 8:Portable video application format
ISO/IEC15938-12 : 2008 EDTN1 ISO/IEC15938-12 : 2008 EDTN1. ISO/IEC15938 : 2008 Information technology - Multimedia content description interface. Part 12:Query format
PAS 197:2009 PAS 197:2009. Code of practice for cultural collections management
PD ISO/TR 11150:2007 PD ISO/TR 11150:2007. Natural gas. Hydrocarbon dew point and hydrocarbon content
08/30175103 DC 08/30175103 DC. BS ISO 27108. Water quality. Determination of selected plant treatment agents and biocide products. Method using solid-phase microextraction (SPME) followed by gas chrom
09/30175027 DC 09/30175027 DC. BS ISO 14934-1. Fire tests. Calibration and use of heat-flux meters. Part 1. General principles
08/30174997 DC 08/30174997 DC. BS ISO 17853. Wear of implant materials. Polymer and metal wear particles. Isolation, characterization and quantification
08/30174988 DC 08/30174988 DC. BS ISO 14243-2. Implants for surgery. Wear of total knee-joint prostheses. Part 2. Methods of measurement
08/30174980 DC 08/30174980 DC. BS ISO 14243-1. Implants for surgery. Wear of total knee-joint prostheses. Part 1. Loading and displacement parameters for wear-testing machines with load control and co
BS 10:2009 BS 10:2009. Specification for flanges and bolting for pipes, valves and fittings
BS EN 50465:2008 BS EN 50465:2008. Gas appliances. Fuel cell gas heating appliance. Fuel cell gas heating appliance of nominal heat input inferior or equal to 70 kW
08/30174903 DC 08/30174903 DC. BS ISO 25113. Intelligent transport systems. Communications access for land mobiles (CALM). Mobile wireless broadband using high capacity spatial division multiple acces
09/30174900 DC 09/30174900 DC. BS IEC 60462. Nuclear instrumentation. Photomultiplier tubes for scintillation counting. Test procedures
BS EN 50106:2008 BS EN 50106:2008. Safety of household and similar electrical appliances. Particular rules for routine tests referring to appliances under the scope of EN 60335-1
BS ISO/IEC 14651:2007 BS ISO/IEC 14651:2007. Information technology. International string ordering and comparison. Method for comparing character strings and description of the common template tailora
BS EN 485-2:2008 BS EN 485-2:2008. Aluminium and aluminium alloys. Sheet, strip and plate. Mechanical properties
BS EN 12808-5:2008 BS EN 12808-5:2008. Grouts for tiles. Determination of water absorption
BS EN 12808-3:2008 BS EN 12808-3:2008. Grouts for tiles. Determination of flexural and compressive strength
BS EN 12808-2:2008 BS EN 12808-2:2008. Grouts for tiles. Determination of resistance to abrasion
BS EN 589:2008 BS EN 589:2008. Automotive fuels. LPG. Requirements and test methods
BS ISO 30000:2009 BS ISO 30000:2009. Ships and marine technology. Ship recycling management systems. Specifications for management systems for safe and environmentally sound ship recycling facilities
09/30174467 DC 09/30174467 DC. BS EN 62563-1. Medical electrical equipment. Medical image display systems. Part 1. Evaluation methods
09/30174438 DC 09/30174438 DC. BS ISO 8820-3. Road vehicles. Fuse-links. Part 3. Fuse- links with tabs (blade type) Type C (medium), Type E (high current) and Type F (miniature)
09/30174294 DC 09/30174294 DC. BS EN ISO 24444. Cosmetics. Sun protection test methods. in vivo determination of SPF (Sun Protection Factor)
BS EN ISO 1179-4:2008 BS EN ISO 1179-4:2008. Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing. Stud ends for general u
BS EN ISO 1179-3:2008 BS EN ISO 1179-3:2008. Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing. Light-duty (L series) s
BS EN ISO 1179-2:2008 BS EN ISO 1179-2:2008. Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing. Heavy-duty (S series) a
BS EN ISO 1179-1:2008 BS EN ISO 1179-1:2008. Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing. Threaded ports
09/30174252 DC 09/30174252 DC. BS EN 62562. Cavity resonator method to measure the complex permittivity of low-loss dielectric plates
PD CLC/TR 61158-1:2008 PD CLC/TR 61158-1:2008. Industrial communication networks. Fieldbus specifications. Overview and guidance for the IEC 61158 and IEC 61784 series
BS ISO 26362:2009 BS ISO 26362:2009. Access panels in market, opinion and social research. Vocabulary and service requirements
08/30174205 DC 08/30174205 DC. BS ISO 25112. Intelligent transport systems. Communications access for land mobiles (CALM). Mobile wireless broadband using IEEE 802.16e/IEEE 802.16g
BS ISO 15371:2009 BS ISO 15371:2009. Ships and marine technology. Fire-extinguishing systems for protection of galley cooking equipment
BS EN 41003:2009 BS EN 41003:2009. Particular safety requirements for equipment to be connected to telecommunication networks and/or a cable distribution system
09/30174047 DC 09/30174047 DC. BS ISO 21216-1. Intelligent transport systems. Wireless communications. CALM using millimetre communications. Part 1. Air interface
09/30174004 DC 09/30174004 DC. BS ISO 13720. Meat and meat products. Enumeration of presumptive Pseudomonas spp.
09/30173908 DC 09/30173908 DC. BS EN 13477-2. Non-destructive testing. Acoustic emission. Equipment characterization. Part 2. Verification of operating characteristics
BS EN 4384:2007 BS EN 4384:2007. Aerospace series. Heat resisting alloy NI-CH1303 (NiCo20Cr20Mo5Ti2Al). Non heat treated. Remelting stock
08/30173839 DC 08/30173839 DC. BS ISO 3548-2. Plain bearings. Thin walled half bearings with or without flange. Part 2. Measurement of wall-thickness and flange thickness
08/30173820 DC 08/30173820 DC. BS EN ISO 19146. Geographic information. Cross-domain vocabularies
BS EN 9104-002:2008 BS EN 9104-002:2008. Aerospace series. Quality management systems. Requirements for oversight of aerospace quality management system certification/registrations programs
BS EN 4301:2009 BS EN 4301:2009. Aerospace series. Identification marking methods for engine items. Engineering requirements
BS EN 14286:2008 BS EN 14286:2008. Aluminium and aluminium alloys. Weldable rolled products for tanks for the storage and transportation of dangerous goods
BS ISO 5832-14:2007 BS ISO 5832-14:2007. Implants for surgery. Metallic materials. Wrought titanium 15-molybdenum 5-zirconium 3-aluminium alloy
BS 93:2008 BS 93:2008. British Association (B.A.) screw threads. Requirements
09/30173454 DC 09/30173454 DC. BS EN 61881-1. Railway applications. Rolling stock equipment. Capacitors for power electronics. Part 1. Requirements, tests and general information
09/30173348 DC 09/30173348 DC. BS ISO 11639. Aerospace. Part numbering for hose assemblies
09/30173318 DC 09/30173318 DC. BS IEC 62523. Radiation protection instrumentation. Cargo/vehicle radiographic inspection system
09/30173298 DC 09/30173298 DC. BS EN 81-21. Safety rules for the construction and installation of lifts. Lifts for the transport of persons and goods. Part 21. New passenger and goods passenger lifts
BS ISO 7578:2008 BS ISO 7578:2008. Road vehicles. Sheath-type glow-plugs. General requirements and test methods
ISO/IEC14496-25 : 2009 EDTN1 ISO/IEC14496-25 : 2009 EDTN1. Information technology - Coding of audio-visual objects. Part 25: 3D Graphics Compression Model
ISO/IEC14496-4 AMD26 (CD-ROM) HEADER ISO/IEC14496-4 AMD26 (CD-ROM) HEADER. ISO/IEC 14496-4 Information technology - Coding of audio-visual objects. Part 4: Conformance testing
BS ISO/IEC 9798-2:2008 BS ISO/IEC 9798-2:2008. Information technology. Security techniques. Entity authentication. Mechanisms using symmetric encipherment algorithms
DD CEN/TS 15754:2008 DD CEN/TS 15754:2008. Animal feeding stuffs. Determination of sugar content. High performance exchange chromatographic method (HPAEC-PAD)
BS ISO 27991:2008 BS ISO 27991:2008. Ships and marine technology. Marine evacuation systems. Means of communication
BS EN 61300-3-34:2009 BS EN 61300-3-34:2009. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Attenuation of random mat
BS 10008:2008 BS 10008:2008. Evidential weight and legal admissibility of electronic information. Specification
BS ISO 10307-2:2009 BS ISO 10307-2:2009. Petroleum products. Total sediment in residual fuel oils. Determination using standard procedures for ageing
BS ISO 10307-1:2009 BS ISO 10307-1:2009. Petroleum products. Total sediment in residual fuel oils. Determination by hot filtration
DD CEN/TS 15747:2008 DD CEN/TS 15747:2008. Solid recovered fuels. 14C-based methods for the determination of the biomass content
DD CEN/TS 15750:2006 DD CEN/TS 15750:2006. Fertilizers. Determination of different forms of nitrogen in fertilizers containing nitrogen only as nitric, ammoniacal and urea nitrogen by two different me
DD CEN/TS 15749:2008 DD CEN/TS 15749:2008. Fertilizers. Determination of sulfates content using three different methods
09/30172818 DC 09/30172818 DC. BS ISO 15320. Paper, board and pulps. Determination of pentachlorophenol in an aqueous extract
BS ISO/IEC 19757-2:2008 BS ISO/IEC 19757-2:2008. Information technology. Document Schema Definition Language (DSDL). Regular-grammer-based validation. RELAX NG
BS ISO 26868:2009 BS ISO 26868:2009. Space data and information transfer systems. Image data compression
BIP 2034:2008 BIP 2034:2008. Disaster and Emergency Management Systems
08/30172647 DC 08/30172647 DC. BS ISO 8729-2. Ships and marine technology. Marine radar reflectors. Part 2. Active type
08/30172620 DC 08/30172620 DC. BS EN ISO 8536-6. Infusion equipment for medical use. Part 6. Freeze drying closures for infusion bottles
08/30172616 DC 08/30172616 DC. BS EN ISO 8536-2. Infusion equipment for medical use. Part 2. Closures for infusion bottles
PD CEN/TR 15745:2008 PD CEN/TR 15745:2008. Liquid petroleum products. Determination of hydrocarbon types and oxygenates via multidimensional gas chromatography method. Round Robin research report
09/30172555 DC 09/30172555 DC. BS ISO 15686-1. Buildings and constructed assets. Service life planning. Part 1. General principles and framework
BS EN 60335-2-54:2008 BS EN 60335-2-54:2008. Household and similar electrical appliances. Safety. Particular requirements for surface-cleaning appliances for household use employing liquids or steam
09/30172497 DC 09/30172497 DC. BS EN ISO 7887. Water quality. Examination and determination of colour
09/30172488 DC 09/30172488 DC. BS EN 60601-2-26. Medical electrical equipment. Part 2-26. Particular requirements for basic safety and essential performance of electroencephalographs
09/30172484 DC 09/30172484 DC. BS EN 60601-2-23. Medical electrical equipment. Part 2-23. Particular requirements for basic safety and essential performance of transcutaneous partial pressure monitori
08/30172385 DC 08/30172385 DC. BS ISO 11452-11. Road vehicles. Component test methods for electrical disturbances from narrowband radiated electromagnetic energy. Part 11. Radiated immunity test metho
BS EN 3323:2009 BS EN 3323:2009. Aerospace series. Bolts with double hexagon head, relieved shank, long thread, in heat resisting steel FE-PM 38 (FV 535). Classification: 1000 MPa/550 °C
BS EN 9101:2008 BS EN 9101:2008. Aerospace series. Quality management systems. Assessment (based on ISO 9001:2000)
BS EN 4626-001:2008 BS EN 4626-001:2008. Aerospace series. Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule. Operating temperatures -65 °C to 125
BS EN 3660-023:2008 BS EN 3660-023:2008. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style A, 90°, composite, unsealed, wit
BS EN 3733-101:2008 BS EN 3733-101:2008. Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous . Protective cover
PD CEN/TR 15738:2008 PD CEN/TR 15738:2008. Petroleum products. Heating fuels. Need, feasibility and required deliverables for a common European specification
PD ISO/TR 29381:2008 PD ISO/TR 29381:2008. Metallic materials. Measurement of mechanical properties by an instrumented indentation test. Indentation tensile properties
BS ISO 15726:2009 BS ISO 15726:2009. Metallic coatings and other inorganic coatings. Electrodeposited zinc alloys with nickel, cobalt or iron
BS ISO 9588:2007 BS ISO 9588:2007. Metallic and other inorganic coatings. Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement
BS EN 13348:2008 BS EN 13348:2008. Copper and copper alloys. Seamless, round copper tubes for medical gases or vacuum
09/30171920 DC 09/30171920 DC. BS EN ISO 11925-2. Reaction to fire tests. Ignitability of building products subjected to direct impingement of flame. Part 2. Single-flame source test
09/30171916 DC 09/30171916 DC. BS EN ISO 9239-1. Reaction to fire tests for floorings. Part 1. Determination of the burning behaviour using a radiant heat source
08/30171906 DC 08/30171906 DC. BS EN ISO 1716. Reaction to fire tests for building and transport products. Determination of the heat of combustion
08/30171902 DC 08/30171902 DC. BS EN ISO 1182. Reaction to fire tests for building and transport products. Non-combustibility test
BS 8515:2009 BS 8515:2009. Rainwater harvesting systems. Code of practice
DD IEC/PAS 62543:2008 DD IEC/PAS 62543:2008. DC transmission using voltage sourced converters
PD ISO/TR 25477:2008 PD ISO/TR 25477:2008. Paper, board and pulps. Basic guidelines for image analysis measurements
ISO10303-59 : 2008 EDTN1 ISO10303-59 : 2008 EDTN1. ISO10303-59 : 2008 Industrial automation systems and integration. Product data representation and exchange. Part 59: Integrated generic resource. Qua
BS EN 3034:2009 BS EN 3034:2009. Aerospace series. Nuts, self-locking, hexagonal with captive washer. In heat resisting steel FE-PA92HT (A286), silver coated. Classification: 1100 MPa/425 °
DD ISO/TS 19072-3:2008 DD ISO/TS 19072-3:2008. Road vehicles. Connection interface for pyrotechnic devices, two-way and three-way connections. Pyrotechnic device and harness connector assembly. Type 1
ISO25902-1 : 2009 EDTN1 ISO25902-1 : 2009 EDTN1. ISO 25902-1 Titanium pipes and tubes - Non-destructive testing -. Part 1: Eddy-current examination
ISO23727 : 2009 EDTN1 ISO23727 : 2009 EDTN1. ISO 23727 Earth-moving machinery - Wheeled loader coupler for attachments
BS EN 61162-3:2008 BS EN 61162-3:2008. Maritime navigation and radiocommunication equipment and systems. Digital interfaces. Serial data instrument network
BS EN 975-1:2009 BS EN 975-1:2009. Sawn timber. Appearance grading of hardwoods. Oak and beech
08/30171478 DC 08/30171478 DC. BS ISO 29621. Cosmetics. Microbiology. Guidance factors to the risk assessment and identification of microbiologically low-risk products
BS ISO 26865:2009 BS ISO 26865:2009. Road vehicles. Brake lining friction materials. Standard performance test procedure for commercial vehicles with air brakes
BS 8888:2008 BS 8888:2008. Technical product specification. Specification
BS 3193:2008 BS 3193:2008. Specification for thermally toughened glass panels for use in domestic appliances
BS EN 228:2008 BS EN 228:2008. Automotive fuels.Unleaded petrol.Requirements and test methods
09/30171027 DC 09/30171027 DC. BS ISO 11171. Hydraulic fluid power. Calibration of automatic particle counters for liquids
PD CEN/TR 15728:2008 PD CEN/TR 15728:2008. Design and use of inserts for lifting and handling of precast concrete. Elements
DD IEC/TS 61000-1-2:2008 DD IEC/TS 61000-1-2:2008. Electromagnetic compatibility (EMC). General. Methodology for the achievement of functional safety of electrical and electronic systems including equ
BS ISO 26430-3:2008 BS ISO 26430-3:2008. Digital cinema (D-cinema) operations. Generic extra-theatre message format
BS ISO 26430-2:2008 BS ISO 26430-2:2008. Digital cinema (D-cinema) operations. Digital certificate
BS ISO 26429-7:2008 BS ISO 26429-7:2008. Digital cinema (D-cinema) packaging. Composition playlist
BS ISO 26429-3:2008 BS ISO 26429-3:2008. Digital cinema (D-cinema) packaging. Sound and picture track file
BS ISO 26428-2:2008 BS ISO 26428-2:2008. Digital cinema (D-cinema) distribution master. Audio characteristics
BS ISO 26428-1:2008 BS ISO 26428-1:2008. Digital cinema (D-cinema) distribution master. Image characteristics
BS ISO 15592-3:2008 BS ISO 15592-3:2008. Fine-cut tobacco and smoking articles made from it. Methods of sampling, conditioning and analysis. Determination of total particulate matter of smoking articl
BS EN 60027-1:2006+A2:2007 BS EN 60027-1:2006+A2:2007. Letter symbols to be used in electrical technology. General
08/30170762 DC 08/30170762 DC. BS ISO 11990-2. Lasers and laser-related equipment. Determination of laser resistance of tracheal tubes. Part 2. Tracheal tube cuffs
BS ISO 13606-2:2008 BS ISO 13606-2:2008. Health informatics. Electronic health record communication. Archetype interchange specification
BS ISO 11414:2009 BS ISO 11414:2009. Plastics pipes and fittings. Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion
BS ISO 27831-1:2008 BS ISO 27831-1:2008. Metallic and other inorganic coatings. Cleaning and preparation of metal surfaces. Ferrous metals and alloys
BS ISO 27831-2:2008 BS ISO 27831-2:2008. Metallic and other inorganic coatings. Cleaning and preparation of metal surfaces. Non-ferrous metals and alloys
08/30170610 DC 08/30170610 DC. BS EN ISO 12543-5. Glass in building. Laminated glass and laminated safety glass. Part 5. Dimensions and edge finishing
BS ISO 11413:2008 BS ISO 11413:2008. Plastics pipes and fittings. Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting
BS EN 3672:2008 BS EN 3672:2008. Aerospace series. Shank nuts, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated, for 30° swage. Classification: 1210 MPa (at ambien
BS EN 3631:2008 BS EN 3631:2008. Aerospace series. Fluid fittings, flanged, 90° elbowed. Sealing by O-ring for 0,8 mm thick tubes
BS EN 1646-2:2008 BS EN 1646-2:2008. Leisure accommodation vehicles. Motor caravans. User payload
08/30170415 DC 08/30170415 DC. BS ISO 5667-21. Water quality. Sampling. Part 21. Guidance on sampling of drinking water distributed by tankers or means other than distribution pipes
08/30170398 DC 08/30170398 DC. BS ISO 10932. Milk and milk products. Determination of the minimal inhibitory concentration (MIC) of antibiotics applicable to bifidobacteria and non-enterococcal lactic
BS EN 62503:2008 BS EN 62503:2008. Multimedia quality. Method of assessment of synchronization of audio and video
BS EN 61800-7-304:2008 BS EN 61800-7-304:2008. Adjustable speed electrical power drive systems. Generic interface and use of profiles for power drive systems. Mapping of profile type 4 to network tech
BS EN 61800-7-204:2008 BS EN 61800-7-204:2008. Adjustable speed electrical power drive systems. Generic interface and use of profiles for power drive Systems. Profile type 4 specification
09/30170243 DC 09/30170243 DC. BS EN 54-12. Fire detection and fire alarm systems. Part 12. Smoke detectors. Line detectors using an optical beam
08/30170237 DC 08/30170237 DC. BS ISO 18920. Imaging materials. Reflection prints. Storage practices
BS EN 61230:2008 BS EN 61230:2008. Live working. Portable equipment for earthing or earthing and short-circuiting
BS EN 62288:2008 BS EN 62288:2008. Maritime navigation and radiocommunication equipment and systems. Presentation of navigation-related information on shipborne navigational displays. General requirem
BS EN 15073:2006+A1:2008 BS EN 15073:2006+A1:2008. Chemicals used for treatment of swimming pool water. Sodium dichloroisocyanurate, dihydrate
BS EN 15072:2006+A1:2008 BS EN 15072:2006+A1:2008. Chemicals used for treatment of swimming pool water. Sodium dichloroisocyanurate, anhydrous
BS EN 4604-010:2009 BS EN 4604-010:2009. Aerospace series. Cable, electrical, for signal transmission. Cable, coaxial, 50 ohms, 200 °C, Type KX (light WN). Product standard
BS EN 4604-009:2009 BS EN 4604-009:2009. Aerospace series. Cable, electrical, for signal transmission. Cable, coaxial, light weight, 50 ohms, 180 °C, type KW (light WN). Product standard
BS 7629-1:2008 BS 7629-1:2008. Electric cables. Specification for 300/500 V fire resistant screened cables having low emission of smoke and corrosive gases when affected by fire. Multicore and multipa
PAS 2020:2009 PAS 2020:2009. Direct marketing. Environmental performance. Specification
09/30169964 DC 09/30169964 DC. BS 8550. Guide for the auditing of water quality sampling
09/30169960 DC 09/30169960 DC. BS ISO 22840. Intelligent transport systems. Devices to aid reverse manoeuvres. Extended range backing aid systems (ERBA)
09/30169955 DC 09/30169955 DC. BS 8511. Code of practice for the installation of solid fuel fired heating and cooking appliances in recreational craft
BS EN ISO 11979-4:2008 BS EN ISO 11979-4:2008. Ophthalmic implants. Intraocular lenses. Labelling and information
BS EN 50490:2008 BS EN 50490:2008. Electrical installations for lighting and beaconing of aerodromes. Technical requirements for aeronautical ground lighting control and monitoring systems. Units for
08/30169896 DC 08/30169896 DC. BS EN 61907. Guidance on communication network dependability engineering
08/30169888 DC 08/30169888 DC. BS EN ISO 6887-5. Microbiology of food and animal feeding stuffs. Preparation of test samples, initial suspension and decimal dilutions for microbiological examination.
BS EN 15004-10:2008 BS EN 15004-10:2008. Fixed firefighting systems. Gas extinguishing systems. Physical properties and system design of gas extinguishing systems for IG-541 extinguishant
BS EN 15004-9:2008 BS EN 15004-9:2008. Fixed firefighting systems. Gas extinguishing systems. Physical properties and system design of gas extinguishing systems for IG-55 extinguishant
BS EN 15004-8:2008 BS EN 15004-8:2008. Fixed firefighting systems. Gas extinguishing systems. Physical properties and system design of gas extinguishing systems for IG-100 extinguishant
BS EN 15004-7:2008 BS EN 15004-7:2008. Fixed firefighting systems. Gas extinguishing systems. Physical properties and system design of gas extinguishing systems for IG-01 extinguishant
BS EN 15004-6:2008 BS EN 15004-6:2008. Fixed firefighting systems. Gas extinguishing systems. Physical properties and system design of gas extinguishing systems for HFC 23 extinguishant
BS EN 15004-5:2008 BS EN 15004-5:2008. Fixed firefighting systems. Gas extinguishing systems. Physical properties and system design of gas extinguishing systems for HFC 227ea extinguishant
BS EN 15004-4:2008 BS EN 15004-4:2008. Fixed firefighting systems. Gas extinguishing systems. Physical properties and system design of gas extinguishing systems for HFC 125 extinguishant
BS EN 15004-3:2008 BS EN 15004-3:2008. Fixed firefighting systems. Gas extinguishing systems. Physical properties and system design of gas extinguishing systems for HCFC Blend A extinguishant
BS EN 15004-2:2008 BS EN 15004-2:2008. Fixed firefighting systems. Gas extinguishing systems. Physical properties and system design of gas extinguishing systems for FK-5-1-12 extinguishant
DD CEN/TS 15717:2008 DD CEN/TS 15717:2008. Parquet flooring. General guideline for installation
DD IEC/TS 62257-9-6:2008 DD IEC/TS 62257-9-6:2008. Recommendations for small renewable energy and hybrid systems for rural electrification. Integrated system. Selection of photovoltaic individual elec
PD ISO/TR 1281-2:2008 PD ISO/TR 1281-2:2008. Rolling bearings. Explanatory notes on ISO 281. Modified rating life calculation, based on a systems approach to fatigue stresses
09/30169722 DC 09/30169722 DC. BS ISO 18911. Imaging materials. Processed safety photographic films. Storage practices
BS EN 61174:2008 BS EN 61174:2008. Maritime navigation and radiocommunication equipment and systems. Electronic chart display and information system (ECDIS). Operational and performance requirements,
08/30169640 DC 08/30169640 DC. BS ISO 17089-1. Measurement of fluid flow in closed conduits. Ultrasonic meters for gas. Part 1. Meters for custody transfer and allocation measurement
BS ISO 4040:2009 BS ISO 4040:2009. Road vehicles. Location of hand controls, indicators and tell-tales in motor vehicles
DD CEN/TS 15722:2009 DD CEN/TS 15722:2009. Road transport and traffic telematics. ESafety. ECall minimum set of data (MSD)
BS EN 15333-2:2009 BS EN 15333-2:2009. Respiratory equipment. Open-circuit umbilical supplied compressed gas diving apparatus. Free flow apparatus
08/30169511 DC 08/30169511 DC. BS ISO/IEC 13888-3. Information technology. Security techniques. Non-repudiation. Part 3. Mechanisms using asymmetric techniques
08/30169502 DC 08/30169502 DC. BS ISO/IEC 9798-5. Information technology. Security techniques. Part 5. Mechanisms using zero-knowledge techniques
BS EN 50117-4-1:2008 BS EN 50117-4-1:2008. Coaxial cables. Sectional specification for cables for BCT cabling in accordance with EN 50173. Indoor drop cables for systems operating at 5 MHz - 3000 MHz
BS EN 4644-003:2009 BS EN 4644-003:2009. Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C continuous. Rectangular inserts. P
09/30169469 DC 09/30169469 DC. BS ISO 5667-22. Water quality. Sampling. Part 22. Guidance on the design and installation of groundwater monitoring points
DD ISO/TS 16610-20:2006 DD ISO/TS 16610-20:2006. Geometrical product specifications (GPS). Filtration. Linear profile filters. Basic concepts
DD ISO/TS 16610-1:2006 DD ISO/TS 16610-1:2006. Geometrical product specifications (GPS). Filtration. Overview and basic concepts
BS ISO 13885-1:2008 BS ISO 13885-1:2008. Binders for paints and varnishes. Gel permeation chromatography (GPC). Tetrahydrofuran (THF) as eluent
BS ISO 7267-2:2008 BS ISO 7267-2:2008. Rubber-covered rollers. Determination of apparent hardness. Shore-type durometer method
BS ISO 7267-1:2008 BS ISO 7267-1:2008. Rubber-covered rollers. Determination of apparent hardness. IRHD method
BS EN 4649:2009 BS EN 4649:2009. Aerospace series. Handheld fire extinguishers with synthesis gases, for aircraft use. Technical specification and qualification conditions
09/30169326 DC 09/30169326 DC. BS EN 60601-2-49. Medical electrical equipment. Part 2-49. Particular requirements for basic safety and essential performance of multifunction patient monitoring equipme
09/30169322 DC 09/30169322 DC. BS EN 60601-2-47. Medical electrical equipment. Part 2-47. Particular requirements for the basic safety and essential performance of ambulatory electrocardiographic syst
09/30169318 DC 09/30169318 DC. BS EN 60601-2-34. Medical electrical equipment. Part 2-34. Particular requirements for basic safety and essential performance of invasive blood pressure monitoring equip
09/30169314 DC 09/30169314 DC. BS EN 60601-2-27. Medical electrical equipment. Part 2-27. Particular requirements for basic safety and essential performance of electrocardiographic monitoring equipmen
BS 7079:2009 BS 7079:2009. General introduction to standards for preparation of steel substrates before application of paints and related products
ISO/IEC23004-8:2009 EDTN1 ISO/IEC23004-8:2009 EDTN1. ISO/IEC23004-8 : 2009 Information technology. Multimedia middleware. Part 8: Reference software
ISO/IEC14496-4 AMD27 (CD-ROM) HEADER ISO/IEC14496-4 AMD27 (CD-ROM) HEADER. ISO/IEC 14496-4 Information technology - Coding of audio-visual objects . Part 4: Conformance testing
ISO/IECTR18047-6 : 2008 EDTN2 ISO/IECTR18047-6 : 2008 EDTN2. ISO/IEC/TR18047 : 2008 Information technology - Radio frequency identification device conformance test methods. Part 6: Test methods for ai
ISO28706-3 : 2008 EDTN1 ISO28706-3 : 2008 EDTN1. ISO28706 : 2008 Vitreous and porcelain enamels - Determination of resistance to chemical corrosion. Part 3:Determination of resistance to chemical corr
BS EN 61291-4:2008 BS EN 61291-4:2008. Optical amplifiers. Multichannel applications. Performance specification template
08/30169101 DC 08/30169101 DC. BS EN 61978-1. Fibre optic interconnecting devices and passive components. Fibre optic passive chromatic dispersion compensators. Part 1. Generic specification
BS EN 61184:2008 BS EN 61184:2008. Bayonet lampholders
BS EN 60400:2008 BS EN 60400:2008. Lampholders for tubular fluorescent lamps and starterholders
BS ISO 26906:2009 BS ISO 26906:2009. Hydrometry. Fishpasses at flow measurement structures
BS ISO 7573:2008 BS ISO 7573:2008. Technical product documentation. Parts lists
BS EN 14563:2008 BS EN 14563:2008. Chemical disinfectants and antiseptics. Quantitative carrier test for the evaluation of mycobactericidal or tuberculocidal activity of chemical disinfectants used fo
09/30168911 DC 09/30168911 DC. BS ISO 28399. Dentistry. Products for external tooth bleaching
09/30168908 DC 09/30168908 DC. BS ISO 28319. Dentistry. Laser welding
09/30168905 DC 09/30168905 DC. BS ISO 28158. Dentistry. Integrated dental floss holders
09/30168902 DC 09/30168902 DC. BS ISO 27020. Dentistry. Brackets and tubes for use in orthodontics
09/30168887 DC 09/30168887 DC. BS EN 60601-2-25. Medical electrical equipment. Part 2-25. Particular requirements for basic safety and essential performance of electrocardiographs
09/30168835 DC 09/30168835 DC. BS EN ISO 7885. Dentistry. Sterile injection needles for single use
BS EN 61606-3:2008 BS EN 61606-3:2008. Audio and audiovisual equipment. Digital audio parts. Basic measurement methods of audio characteristics. Professional use
BS EN 1914:2009 BS EN 1914:2009. Inland navigation vessels. Work boats, ship's boats and lifeboats
DD IEC/TS 62538:2009 DD IEC/TS 62538:2009. Categorization of optical devices
ISO29042-4 : 2009 ED1 ISO29042-4 : 2009 ED1. Safety of machinery. Evaluation of the emission of airborne hazardous substances. Part 4: Tracer method for the measurement of the capture efficiency of an
ISO29042-3 : 2009 ED1 ISO29042-3 : 2009 ED1. Safety of machinery. Evaluation of the emission of airborne hazardous substances. Part 3: Test bench method for the measurement of the emission rate of a g
ISO29042-2 : 2009 ED1 ISO29042-2 : 2009 ED1. Safety of machinery. Evaluation of the emission of airborne hazardous substances. Part 2: Tracer gas method for the measurement of the emission rate of a g
09/30168526 DC 09/30168526 DC. BS ISO/IEC 27033-1. Information technology. Security techniques. Network security. Part 1. Guidelines for network security
BS EN 253:2009 BS EN 253:2009. District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Pipe assembly of steel service pipe, polyurethane thermal insulation and
BS EN 13588:2008, BS 2000-522:2008 BS EN 13588:2008, BS 2000-522:2008. Bitumen and bituminous binders. Determination of cohesion of bituminous binders with pendulum test
BS EN 12859:2008 BS EN 12859:2008. Gypsum blocks. Definitions, requirements and test methods
BS EN 15116:2008 BS EN 15116:2008. Ventilation in buildings. Chilled beams. Testing and rating of active chilled beams
BS EN 508-3:2008 BS EN 508-3:2008. Roofing products from metal sheet. Specification for self-supporting products of steel, aluminium or stainless steel sheet. Stainless steel
BS EN 508-1:2008 BS EN 508-1:2008. Roofing products from metal sheet. Specification for self-supporting products of steel, aluminium or stainless steel sheet. Steel
BS EN 506:2008 BS EN 506:2008. Roofing products of metal sheet. Specification for self-supporting products of copper or zinc sheet
BS EN 13573:2009 BS EN 13573:2009. Inland navigation vessels. Anchoring, coupling, towing, hauling and mooring systems
BS EN 62535:2009 BS EN 62535:2009. Insulating liquids. Test method for detection of potentially corrosive sulphur in used and unused insulating oil
BS ISO 27830:2008 BS ISO 27830:2008. Metallic and other inorganic coatings. Guidelines for specifying metallic and inorganic coatings
BS 8510:2009 BS 8510:2009. Child use and care articles. Safety of children's sleep bags. Safety requirements and test methods
08/30168258 DC 08/30168258 DC. BS IEC 62534. Radiation protection instrumentation. Highly sensitive hand-held instruments for neutron detection of radioactive material
09/30168253 DC 09/30168253 DC. BS IEC 62533. Radiation protection instrumentation. Highly sensitive hand-held instruments for photon detection of radioactive material
DD IEC/TS 62257-9-1:2008 DD IEC/TS 62257-9-1:2008. Recommendations for small renewable energy and hybrid systems for rural electrification. Micropower systems
BS ISO/IEC 25012:2008 BS ISO/IEC 25012:2008. Software engineering. Software product quality requirements and evaluation (SQuaRE). Data quality model
PD CEN ISO/TR 24094:2007 PD CEN ISO/TR 24094:2007. Analysis of natural gas. Validation methods for gaseous reference materials
09/30168197 DC 09/30168197 DC. BS 8102. Code of practice for protection of structures against water from the ground
BS EN 61300-2-2:2008 BS EN 61300-2-2:2008. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Mating durability
BS ISO/IEC 24773:2008 BS ISO/IEC 24773:2008. Software engineering. Certification of software engineering professionals. Comparison framework
PD CEN/TR 15615:2008 PD CEN/TR 15615:2008. Explanation of the general relationship between various CEN standards and the Energy Performance of Buildings Directive (EPBD). Umbrella document
PD CEN/TR 15716:2008 PD CEN/TR 15716:2008. Solid recovered fuels. Determination of combustion behaviour
BS EN 13172:2008 BS EN 13172:2008. Thermal insulating products. Evaluation of conformity
BS 6073-2:2008 BS 6073-2:2008. Precast concrete masonry units. Guide for specifying precast concrete masonry units
BS ISO 26623-2:2008 BS ISO 26623-2:2008. Polygonal taper interface with flange contact surface. Dimensions and designation of receivers
BS ISO 26623-1:2008 BS ISO 26623-1:2008. Polygonal taper interface with flange contact surface. Dimensions and designation of shanks
BS ISO 26622-2:2008 BS ISO 26622-2:2008. Modular taper interface with ball track system. Dimensions and designation of receivers
BS ISO 26622-1:2008 BS ISO 26622-1:2008. Modular taper interface with ball track system. Dimensions and designation of shanks
PD 6695-1-10:2009 PD 6695-1-10:2009. Recommendations for the design of structures to BS EN 1993-1-10
08/30167985 DC 08/30167985 DC. BS ISO 8664 AMD1. Tyres for agricultural tractors and machines. Code-designated and service-description marked radial drive-wheel tyres
09/30167981 DC 09/30167981 DC. BS ISO 7867-2 AMD1. Tyres and rims (metric series) for agricultural tractors and machines. Part 2. Service description and load ratings
08/30167904 DC 08/30167904 DC. BS ISO 4251-1 AMD1. Tyres (ply rating marked series) and rims for agricultural tractors and machines. Part 1. Tyre designation and dimensions, and approved rim contours
BS ISO 11155-2:2009 BS ISO 11155-2:2009. Road vehicles. Air filters for passenger compartments. Test for gaseous filtration
BS EN 115-1:2008 BS EN 115-1:2008. Safety of escalators and moving walks. Construction and installation
BS ISO 32000-1:2008 BS ISO 32000-1:2008. Document management. Portable document format. PDF 1.7
08/30167693 DC 08/30167693 DC. BS EN 50085-2-3. Cable trunking systems and cable ducting systems for electrical installations. Part 2-3. Particular requirements for slotted cable trunking systems inte
BS EN 10120:2008 BS EN 10120:2008. Steel sheet and strip for welded gas cylinders
BS EN 15696:2008 BS EN 15696:2008. Self storage. Specification for self storage services
BS EN 62137-1-4:2009 BS EN 62137-1-4:2009. Surface mounting technology. Environmental and endurance test methods for surface mount solder joint. Cyclic bending test
BS EN 80000-13:2008 BS EN 80000-13:2008. Quantities and units. Information science and technology
BS 148:2009 BS 148:2009. Reclaimed mineral insulating oil for transformers and switchgear. Specification
09/30167484 DC 09/30167484 DC. BS ISO 10332. Non-destructive testing of steel tubes. Automated ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for verification of h
BS EN ISO 27874:2008 BS EN ISO 27874:2008. Metallic coatings. Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes. Specification and test methods
BS EN 13126-4:2008 BS EN 13126-4:2008. Building hardware. Requirements and test methods for windows and doors height windows. Espagnolettes
08/30167401 DC 08/30167401 DC. BS ISO 20492-3. Glass in buildings. Insulating glass. Part 3. Gas concentration and gas leakage
09/30167386 DC 09/30167386 DC. BS EN ISO 17573. Electronic fee collection. Systems architecture for vehicle related tolling
08/30167362 DC 08/30167362 DC. BS ISO 10710. Water quality. Growth inhibition test with the marine and brackish water macroalgae Ceramium tenuicorne
BS EN 61755-3-8:2009 BS EN 61755-3-8:2009. Fibre optic interconnecting devices and passive Components. Fibre optic connector optical interfaces. Optical interface, 2,5 mm and 1,25 mm diameter cylindri
BS ISO 21278-2:2008 BS ISO 21278-2:2008. Equipment for crop protection. Induction hoppers. General requirements and performance limits
08/30167126 DC 08/30167126 DC. BS EN ISO 14171. Welding consumables. Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine gra
08/30167121 DC 08/30167121 DC. BS EN ISO 14174. Welding consumables. Fluxes for submerged arc welding and electroslag welding. Classification
09/30167117 DC 09/30167117 DC. BS EN ISO 17633. Welding consumables. Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels. C
BS EN 61000-3-3:2008 BS EN 61000-3-3:2008. Electromagnetic compatibility (EMC). Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipm
BS EN 3733-004:2008 BS EN 3733-004:2008. Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 °C continuous. Receptacle, connector, f
BS EN 60519-21:2009 BS EN 60519-21:2009. Safety in electroheat installations. Particular requirements for resistance heating equipment. Heating and melting glass equipment
BS 25777:2008 BS 25777:2008. Information and communications technology continuity management. Code of practice
08/30166961 DC 08/30166961 DC. BS ISO 24100. Privacy. The basic principles for probe personal data protection
BS EN 50131-2-6:2008 BS EN 50131-2-6:2008. Alarm systems. Intrusion and hold-up systems. Opening contacts (magnetic)
DD CEN ISO/TS 25110:2008 DD CEN ISO/TS 25110:2008. Electronic fee collection. Interface definition for on- board account using integrated circuit card (ICC)
PD 6688-1-7:2009 PD 6688-1-7:2009. Recommendations for the design of structures to BS EN 1991-1-7
08/30166853 DC 08/30166853 DC. BS ISO 21254-3. Lasers and laser-related equipment. Test methods for laser radiation-induced damage threshold. Part 3. Assurance of laser power (energy) handling capabil
08/30166850 DC 08/30166850 DC. BS EN ISO 21254-2. Lasers and laser-related equipment. Test methods of laser radiation-induced damage threshold. Part 2. Threshold determination
08/30166847 DC 08/30166847 DC. BS ISO 21254-1. Lasers and laser-related equipment. Test methods for laser radiation-induced damage threshold. Part 1. Definitions and general principles
08/30166844 DC 08/30166844 DC. BS ISO 19012-2. Optics and photonics. Designation of microscope objectives. Part 2. Chromatic correction
BS EN 50164-7:2008 BS EN 50164-7:2008. Lightning protection components (LPC). Requirements for earthing enhancing compounds
BS EN 50164-1:2008 BS EN 50164-1:2008. Lightning protection components (LPC). Requirements for connection components
BS EN 50164-2:2008 BS EN 50164-2:2008. Lightning protection components (LPC). Requirements for conductors and earth electrodes
BS ISO 26602:2009 BS ISO 26602:2009. Fine ceramics (advanced ceramics, advanced technical ceramics). Silicon nitride materials for rolling bearing balls
BS 18004:2008 BS 18004:2008. Guide to achieving effective occupational health and safety performance
BS EN 50164-4:2008 BS EN 50164-4:2008. Lightning protection components (LPC). Requirements for conductor fasteners
BS 1427:2009 BS 1427:2009. Guide to on-site test methods for the analysis of waters
BS 6798:2009 BS 6798:2009. Specification for installation and maintenance of gas-fired boilers of rated input not exceeding 70 kW net
08/30166507 DC 08/30166507 DC. BS ISO 10580. Resilient, textile and laminate floor coverings. Test method for emissions of volatile organic compounds (VOC)
09/30166492 DC 09/30166492 DC. BS ISO 10893-12. Non-destructive testing of steel tubes. Part 12. Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-wel
09/30166488 DC 09/30166488 DC. BS ISO 10893-11. Non-destructive testing of steel tubes. Part 11. Automated ultrasonic testing of weld seam of welded steel tubes forthe detection of longitudinal and/or
09/30166485 DC 09/30166485 DC. BS ISO 10893-10. Non-destructive testing of steel tubes. Part 10. Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel
09/30166482 DC 09/30166482 DC. BS ISO 10893-9. Non-destructive testing of steel tubes. Part 9. Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manuf
09/30166479 DC 09/30166479 DC. BS ISO 10893-8. Non-destructive testing of steel tubes. Part 8. Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfection
09/30166476 DC 09/30166476 DC. BS ISO 10893-7. Non-destructive testing of steel tubes. Part 7. Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
09/30166473 DC 09/30166473 DC. BS ISO 10893-6. Non-destructive testing of steel tubes. Part 6. Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
09/30166470 DC 09/30166470 DC. BS ISO 10893-5. Non-destructive testing of steel tubes. Part 5. Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surfac
09/30166467 DC 09/30166467 DC. BS ISO 10893-4. Non-destructive testing of steel tubes. Part 4. Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections
09/30166464 DC 09/30166464 DC. BS ISO 10893-3. Non-destructive testing of steel tubes. Part 3. Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferro
09/30166461 DC 09/30166461 DC. BS ISO 10893-2. Non-destructive testing of steel tubes. Part 2. Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the d
09/30166458 DC 09/30166458 DC. BS ISO 10893-1. Non-destructive testing of steel tubes. Part 1. Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for th
BS EN 15706:2009 BS EN 15706:2009. Hardware for furniture. Strength and durability of slide fittings for sliding doors and roll fronts
BS EN 61512-3:2008 BS EN 61512-3:2008. Batch control. General and site recipe models and representation
BS ISO 12164-4:2008 BS ISO 12164-4:2008. Hollow taper interface with flange contact surface. Dimensions of receivers for stationary tools
BS ISO 12164-3:2008 BS ISO 12164-3:2008. Hollow taper interface with flange contact surface. Dimensions of shanks for stationary tools
BS EN 15704:2008 BS EN 15704:2008. Liming materials. Determination of the breakdown of granulated calcium and calcium/magnesium carbonates under the influence of water
DD CEN/TS 15705:2009 DD CEN/TS 15705:2009. Fertilizers. Determination of urea condensates using high-performance liquid chromotography (HPLC). Isobutylidenediurea and crotonylidenediurea (method A) an
BS EN 15701:2009 BS EN 15701:2009. Plastics. Thermoplastic jackets for insulation products for building equipment and industrial installations. Requirements and test methods
BS EN 15702:2008 BS EN 15702:2008. Cellular plastics. Cell count procedure for flexible and rigid polyurethane
BS ISO 26424:2008 BS ISO 26424:2008. Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of the abrasion resistance of coatings by a micro-scale abrasion test
BS ISO 6301-1:2009 BS ISO 6301-1:2009. Pneumatic fluid power. Compressed-air lubricators. Main characteristics to be included in supplier's literature and product-marking requirements
BS ISO 26945:2008 BS ISO 26945:2008. Metallic and other inorganic coatings. Electrodeposited coatings of tin-cobalt alloy
BS ISO 26423:2009 BS ISO 26423:2009. Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of coating thickness by crater-grinding method
BS EN 61076-2-105:2008 BS EN 61076-2-105:2008. Connectors for electronic equipment. Product requirements. Circular connectors. Detail specification for M5 connectors with screw-locking
09/30165942 DC 09/30165942 DC. BS ISO 21438-3. Workplace atmospheres. Determination of inorganic acids by ion chromatography. Part 3. Hydrofluoric acid and particulate fluorides
09/30165939 DC 09/30165939 DC. BS ISO 30011. Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
09/30165933 DC 09/30165933 DC. BS EN 61975. System tests for high-voltage direct current (HVDC) installations
ISO29771 : 2008 EDTN1 ISO29771 : 2008 EDTN1. ISO29771 : 2008 Thermal insulating materials for building applications Determination of organic content
ISO29768 : 2008 EDTN1 ISO29768 : 2008 EDTN1. ISO29768 : 2008 Thermal insulating products for building applications - Determination of linear dimensions of test specimens
ISO29770 : 2008 EDTN1 ISO29770 : 2008 EDTN1. ISO29770 : 2008 Thermal insulating products for building applications Determination of thickness for floating-floor insulating products
ISO29466 : 2008 EDTN1 ISO29466 : 2008 EDTN1. ISO29466 : 2008 Thermal insulating products for building applications - Determination of thickness
ISO29764 : 2008 EDTN1 ISO29764 : 2008 EDTN1. ISO29764 : 2008 Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature condi
ISO29472 : 2008 EDTN1 ISO29472 : 2008 EDTN1. ISO29472 : 2008 Thermal insulating products for building applications -Determination of dimensional stability under specified temperature and humidity cond
ISO29766 : 2008 EDTN1 ISO29766 : 2008 EDTN1. ISO29766 : 2008 Thermal insulating products for building applications - Determination of tensile strength parallel to faces
ISO29767 : 2008 EDTN1 ISO29767 : 2008 EDTN1. ISO29767 : 2008 Thermal insulating products for building applications - Determination of short-term water absorption by partial immersion
ISO29465 : 2008 EDTN1 ISO29465 : 2008 EDTN1. ISO29465 : 2008 Thermal insulating products for building applications - Determination of length and width
ISO29467 : 2008 EDTN1 ISO29467 : 2008 EDTN1. ISO29467 : 2008 Thermal insulating products for building applications - Determination of squareness
ISO29468 : 2008 EDTN1 ISO29468 : 2008 EDTN1. ISO29468 : 2008 Thermal insulating products for building applications - Determination of flatness
BS ISO 29470:2008 BS ISO 29470:2008. Thermal insulating products for building applications. Determination of the apparent density
ISO29471 : 2008 EDTN1 ISO29471 : 2008 EDTN1. ISO29471 : 2008 Thermal insulating products for building applications - Determination of dimensional stability under constant normal laboratory conditions
ISO29769 : 2008 EDTN1 ISO29769 : 2008 EDTN1. ISO29769 : 2008 Thermal insulating products for building applications - Determination of behaviour under point load
09/30165797 DC 09/30165797 DC. BS EN 60601-2-57. Medical electrical equipment. Part 2-57. Particular requirements for basic safety and essential performance of non-laser light source equipment intende
09/30165791 DC 09/30165791 DC. BS IEC 60737. Nuclear power plant. Instrumentation important to safety. Temperature sensors (In-core and primary coolant circuit). Characteristics and test methods
DD CEN/TS 13476-4:2008 DD CEN/TS 13476-4:2008. Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U),
BS EN 1097-7:2008 BS EN 1097-7:2008. Tests for mechanical and physical properties of aggregates. Determination of the particle density of filler. Pyknometer method
BS EN 933-4:2008 BS EN 933-4:2008. Tests for geometrical properties of aggregates. Determination of particle shape. Shape index
DD CEN/TS 15398:2008 DD CEN/TS 15398:2008. Resilient, textile and laminate floor coverings. Floor covering standard symbols
BS EN 1093-1:2008 BS EN 1093-1:2008. Safety of machinery. Evaluation of the emission of airborne hazardous substances. Selection of test methods
BS EN 15698-1:2009 BS EN 15698-1:2009. District heating pipes. Preinsulated bonded twin pipe systems for directly buried hot water networks. Twin pipe assembly of steel service pipe, polyurethane ther
DD CEN/TS 15699:2009 DD CEN/TS 15699:2009. Health informatics. Clinical knowledge resources. Metadata
BS EN 1852-1:2009 BS EN 1852-1:2009. Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP). Specifications for pipes, fittings and the system
BS EN 448:2009 BS EN 448:2009. District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Fitting assemblies of steel service pipes, polyurethane thermal insulati
BS ISO 14798:2009 BS ISO 14798:2009. Lifts (elevators), escalators and moving walks. Risk assessment and reduction methodology
BS 5266-10:2008 BS 5266-10:2008. Guide to the design and provision of emergency lighting to reduce the risks from hazards in the event of failure of the normal lighting supply
08/30165441 DC 08/30165441 DC. BS ISO 5610-15. Tool holders with rectangular shank for indexable inserts. Part 15. Style V
08/30165435 DC 08/30165435 DC. BS ISO 5610-14. Tool holders with rectangular shank for indexable inserts. Part 14. Style H
08/30165431 DC 08/30165431 DC. BS ISO 5610-13. Tool holders with rectangular shank for indexable inserts. Part 13. Style T
08/30165427 DC 08/30165427 DC. BS ISO 5610-12. Tool holders with rectangular shank for indexable inserts. Part 12. Style S
08/30165424 DC 08/30165424 DC. BS ISO 5610-11. Tool holders with rectangular shank for indexable inserts. Part 11. Style R
08/30165420 DC 08/30165420 DC. BS ISO 5610-10. Tool holders with rectangular shank for indexable inserts. Part 10. Style N
08/30165416 DC 08/30165416 DC. BS ISO 5610-9. Tool holders with rectangular shank for indexable inserts. Part 9. Style L
08/30165412 DC 08/30165412 DC. BS ISO 5610-8. Tool holders with rectangular shank for indexable inserts. Part 8. Style K
08/30165406 DC 08/30165406 DC. BS ISO 5610-7. Tool holders with rectangular shank for indexable inserts. Part 7. Style J
08/30165402 DC 08/30165402 DC. BS ISO 5610-6. Tool holders with rectangular shank for indexable inserts. Part 6. Style G
08/30165399 DC 08/30165399 DC. BS ISO 5610-5. Tool holders with rectangular shank for indexable inserts. Part 5. Style F
08/30165395 DC 08/30165395 DC. BS ISO 5610-4. Tool holders with rectangular shank for indexable inserts. Part 4. Style D
08/30165392 DC 08/30165392 DC. BS ISO 5610-3. Tool holders with rectangular shank for indexable inserts. Part 3. Style B
08/30165388 DC 08/30165388 DC. BS ISO 5610-2. Tool holders with rectangular shank for indexable inserts. Part 2. Style A
08/30165376 DC 08/30165376 DC. BS ISO 5610-1. Tool holders with rectangular shank for indexable inserts. Part 1. General survey, correlation and determination of dimensions
BS EN ISO 7263:2008 BS EN ISO 7263:2008. Corrugating medium. Determination of the flat crush resistance after laboratory fluting
BS EN 1431:2009, BS 2000-458:2009 BS EN 1431:2009, BS 2000-458:2009. Bitumen and bituminous binders. Determination of residual binder and oil distillate from bitumen emulsions by distillation
BS EN 1430:2009, BS 2000-292:2009 BS EN 1430:2009, BS 2000-292:2009. Bitumen and bituminous binders. Determination of particle polarity of bituminous emulsions
BS EN 1429:2009, BS 2000-91:2009 BS EN 1429:2009, BS 2000-91:2009. Bitumen and bituminous binders. Determination of residue on sieving of bituminous emulsions, and determination of storage stability b
BS 8498:2008 BS 8498:2008. British Standards for screw threads and screw gauges. Introduction and guidance
09/30165207 DC 09/30165207 DC. BS ISO 28801. Double sampling plans by attributes with minimal sample sizes, indexed by producer's risk quality (PRQ) and consumer's risk quality (CRQ)
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
