BIS Standards Catalogue
BS EN 14768:2005 BS EN 14768:2005. Fibreboard drums. Removable head (open head) drums with slip on lids with a nominal capacity of 5 l to 600 l
DD CEN/TS 14631:2005 DD CEN/TS 14631:2005. Postal services. Automatic identification of receptacles and containers. Receptacle asset numbering
DD CEN/TS 14441:2005 DD CEN/TS 14441:2005. Postal services. Mail aggregates. Creation, processing and tracking
PD IEC/TR 62285:2005 PD IEC/TR 62285:2005. Application guide for non-linear coefficient measuring methods
BS EN 13141-8:2006 BS EN 13141-8:2006. Ventilation for buildings. Performance testing of components/products for residential ventilation. Performance testing of un-ducted mechanical supply and exhaust
BS EN 14034-2:2006 BS EN 14034-2:2006. Determination of explosion characteristics of dust clouds. Determination of the maximum rate of explosion pressure rise (dp/dt) max of dust clouds
BS EN 14034-3:2006 BS EN 14034-3:2006. Determination of explosion characteristics of dust clouds. Determination of the lower explosion limit LEL of dust clouds
BS EN ISO 10664:2005 BS EN ISO 10664:2005. Hexalobular internal driving feature for bolts and screws
BS EN ISO 17624:2004 BS EN ISO 17624:2004. Acoustics. Guidelines for noise control in offices and workrooms by means of acoustical screens
BS EN 60335-2-61:2003 BS EN 60335-2-61:2003. Specification for safety of household and similar electrical appliances. Particular requirements for thermal-storage room heaters
BS EN 60335-2-98:2003 BS EN 60335-2-98:2003. Specification for safety of household and similar electrical appliances. Particular requirements for humidifiers
BS ISO 21348:2007 BS ISO 21348:2007. Space environment (natural and artificial). Process for determining solar irradiances
04/30109635 DC 04/30109635 DC. BS EN 54-23. Fire detection and fire alarm systems. Part 23. Fire alarm devices. Visual alarms
BS EN 13454-1:2004 BS EN 13454-1:2004. Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate. Definitions and requirements
BS ISO 18084:2005 BS ISO 18084:2005. Press tools for tablets. Punches and dies
BS EN 14749:2005 BS EN 14749:2005. Domestic and kitchen storage units and worktops. Safety requirements and test methods
BS EN 1621-2:2003 BS EN 1621-2:2003. Motorcyclists' protective clothing against mechanical impact. Motorcyclists back protectors. Requirements and test methods
BS EN 54-3:2001 BS EN 54-3:2001. Fire detection and fire alarm systems. Fire alarm devices. Sounders
BS EN 14962:2006, BS 6068-5.40:2006 BS EN 14962:2006, BS 6068-5.40:2006. Water quality. Guidance on the scope and selection of fish sampling methods
BS ISO 18073:2004, BS 6068-2.90:2004 BS ISO 18073:2004, BS 6068-2.90:2004. Water quality. Determination of tetra- to octa-chlorinated dioxins and furans. Method using isotope dilution HRGC/HRMS
04/30109749 DC 04/30109749 DC. ISO 9355-4. Ergonomic requirements for the design of displays and control actuators. Part 4. Location and arrangement of displays and control actuators
BS EN ISO 7142:2004 BS EN ISO 7142:2004. Binders for paints and varnishes. Epoxy resins. General methods of test
ISO13926-1 : 2004 EDTN3 ISO13926-1 : 2004 EDTN3. ISO13926-1 : 2004 Pen systems -. Part 1: Glass cylinders for pen-injectors for medical use
04/30109842 DC 04/30109842 DC. IEC 61300-3-7 Ed 2.0. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-7. Examinations and measurements. Wavelen
04/30109862 DC 04/30109862 DC. BS EN ISO 294-1. AMD 2. Plastics. Injection moulding of test specimens of thermoplastic materials. Part 1. General principles, and moulding of multipurpose and bar test
BS ISO 4731:2006 BS ISO 4731:2006. Oil of geranium (Pelargonium X ssp.)
BS EN 14776:2004 BS EN 14776:2004. Space engineering. Ground systems and operation. Telemetry and telecommand packet utilization
BS EN 14777:2004 BS EN 14777:2004. Space engineering. Multipaction design and test
BS EN 9104:2006 BS EN 9104:2006. Aerospace series. Quality management systems. Requirements for aerospace quality management system certification/ registrations programs
DD CEN/TS 81-29:2004 DD CEN/TS 81-29:2004. Safety rules for the construction and installation of lifts. Safety rules for the construction and installation of lifts. Lifts for the transport of persons
BS EN 62053-11:2003 BS EN 62053-11:2003. Electricity metering equipment (a.c.). Particular requirements. Electromechanical meters for active energy (classes 0,5, 1 and 2)
BIP 2028:2003 BIP 2028:2003. The project manager's guide to handling risk
BS EN 62053-22:2003 BS EN 62053-22:2003. Electricity metering equipment (a.c.). Particular requirements. Static meters for active energy (classes 0,2 S and 0,5 S)
BS EN 62053-21:2003 BS EN 62053-21:2003. Electricity metering equipment (a.c.). Particular requirements. Static meters for active energy (classes 1 and 2)
BS EN 62053-23:2003 BS EN 62053-23:2003. Electricity metering equipment (a.c.). Particular requirements. Static meters for reactive energy (classes 2 and 3)
BS EN 60335-2-90:2006 BS EN 60335-2-90:2006. Household and similar electrical appliances. Safety. Particular requirements for commercial microwave ovens
BS EN 60335-2-8:2003 BS EN 60335-2-8:2003. Specification for safety of household and similar electrical appliances. Particular requirements for shavers, hair clippers and similar appliances
BS ISO 18172-2:2007 BS ISO 18172-2:2007. Gas cylinders. Refillable welded stainless steel cylinders. Test pressure greater than 6 MPa
04/30109987 DC 04/30109987 DC. EN 9300-1. Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data within the aerospace industry. Part 1. Structure
04/30109990 DC 04/30109990 DC. EN 9300-2. Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data within the aerospace industry. Part 2. Requirements
04/30109993 DC 04/30109993 DC. EN 9300-4. Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data within the aerospace industry. Part 4. Description M
BS ISO 199:2005 BS ISO 199:2005. Rolling bearings. Thrust bearings. Tolerances
BIP 3008:2004 BIP 3008:2004. Accord EMS (environment management systems) CD-ROM
BS ISO 17432:2004 BS ISO 17432:2004. Health informatics. Messages and communication. Web access to DICOM persistent objects
BIP 3007:2004 BIP 3007:2004. Accord HS (health & safety software toolkit) CD-ROM
BS EN 144-3:2003 BS EN 144-3:2003. Respiratory protective devices. Gas cylinder valves. Outlet connections for diving gases Nitrox and oxygen
BS EN 14204:2004 BS EN 14204:2004. Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of mycobactericidal activity of chemical disinfectants and antiseptics used i
ISO20022-5 : 2004 (R08) EDTN1 ISO20022-5 : 2004 (R08) EDTN1. ISO20022-5 : 200 Financial services - UNIversal Financial Industry message scheme -. Part 5: ISO 20022 Reverse Engineering
ISO20022-3 : 2004 (R08) EDTN1 ISO20022-3 : 2004 (R08) EDTN1. ISO20022-3 : 2004 Financial services - UNIversal Financial Industry message scheme -. Part 3: ISO 20022 Modelling Guidelines
ISO20022-4 : 2004 (R08) EDTN1 ISO20022-4 : 2004 (R08) EDTN1. ISO20022-4 : 2004 Financial services - UNIversal Financial Industry message scheme -. Part 4 : ISO 20022 XML design rules
04/30110128 DC 04/30110128 DC. BS EN 14243. Post-consumer tyre. Materials and applications
CWA 14921:2004 CWA 14921:2004. Web services. Technology and standardization aspects
BS ISO/IEC 21000-5:2004 BS ISO/IEC 21000-5:2004. Information technology. Multimedia framework (MPEG-21). Rights Expression Language
ISO/IEC11581-5 : 2004 EDTN 1 ISO/IEC11581-5 : 2004 EDTN 1. ISO/IEC11581-5 : 2004 Information technology -- User system interfaces and symbols -- Icon symbols and functions -- . Part 5: Tool icons
BS EN 12863:2002 BS EN 12863:2002. Transportable gas cylinders. Periodic inspection and maintenance of dissolved acetylene cylinders
PD CEN/TR 15444:2006 PD CEN/TR 15444:2006. Transportable gas cylinders. Gas cylinders conforming to the TPED to be used for PED applications. Applicability and justifications
BS EN 12312-17:2004 BS EN 12312-17:2004. Aerospace series. Aircraft ground support equipment. Specific requirements. Air conditioning equipment
BS ISO 1304:2006 BS ISO 1304:2006. Rubber compounding ingredients. Carbon black. Determination of iodine adsorption number
PD IEC/TR 62383:2006 PD IEC/TR 62383:2006. Determination of magnetic loss under magnetic polarization waveforms including higher harmonic components. Measurement, modelling and calculation methods
BS 1970:2001 BS 1970:2001. Hot water bottles manufactured from rubber and PVC. Specification
PD 6682-6:2003 PD 6682-6:2003. Aggregates. Aggregates for unbound and hydraulically bound materials for use in civil engineering works and road construction. Guidance on the use of BS EN 13242
BS ISO 12648:2006 BS ISO 12648:2006. Graphic technology. Safety requirements for printing press systems
BS ISO 15243:2004 BS ISO 15243:2004. Rolling bearings. Damage and failures. Terms, characteristics and causes
BS EN 12813:2004 BS EN 12813:2004. Temporary works equipment. Load bearing towers of prefabricated components. Particular methods of structural design
WD/ISO/IEC17344 : 2005 EDTN1 WD/ISO/IEC17344 : 2005 EDTN1. ISO/IEC17344 : 2005 Information technology -- Data interchange on 120 mm and 80 mm using +R format -- Capacity: 4,7 Gbytes and 1,46 Gbytes pe
WD/ISO/IEC17345 : 2005 EDTN1 WD/ISO/IEC17345 : 2005 EDTN1. ISO/IEC17345 : 2005 Information technology -- Data interchange on 130 mm rewritable and read many ultra density optical (UDO) disk cartridges
ISO/IEC17346 : 2005 EDTN1 ISO/IEC17346 : 2005 EDTN1. ISO/IEC17346 : 2005 Information technology -- Data interchange on 90 mm optical disk cartridges -- Capacity: 1,3 Gbytes per cartridge
BS EN 12812:2004 BS EN 12812:2004. Falsework. Performance requirements and general design
ISO/IEC23290 : 2004 EDTN2 ISO/IEC23290 : 2004 EDTN2. ISO/IEC23290 : 2004 Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network - Ma
BS EN 12843:2004 BS EN 12843:2004. Precast concrete products. Masts and poles
ISO11087 : 2004 EDTN.2 ISO11087 : 2004 EDTN.2. ISO11087 : 2004 Alpine ski-bindings -Retention devices - Requirements and test methods
BS EN 1870-17:2007 BS EN 1870-17:2007. Safety of woodworking machines. Circular sawing machines. Manual horizontal cutting cross-cut sawing machines with one saw unit (manual radial arm saws)
BS EN 14889-1:2006 BS EN 14889-1:2006. Fibres for concrete. Steel fibres. Definitions, specifications and conformity
BS EN 14889-2:2006 BS EN 14889-2:2006. Fibres for concrete. Polymer fibres. Definitions, specifications and conformity
BS ISO 12611:2004 BS ISO 12611:2004. Cinematography. Audio head tones for use in international exchange of 35 mm analogue magnetic film masters. Specifications and location
BS ISO 11901-2:2004 BS ISO 11901-2:2004. Tools for pressing. Gas springs. Specification of accessories
BS EN 13094:2004 BS EN 13094:2004. Tanks for the transport of dangerous goods. Metallic tanks with a working pressure not exceeding 0,5 bar. Design and construction
BS EN 1366-8:2004 BS EN 1366-8:2004. Fire resistance tests for service installations. Smoke extraction ducts
BS ISO 248:2005 BS ISO 248:2005. Rubber, raw. Determination of volatile-matter content
BS ISO 2878:2005 BS ISO 2878:2005. Rubber. Antistatic and conductive products. Determination of electrical resistance
BS ISO 2921:2005 BS ISO 2921:2005. Rubber, vulcanized. Determination of low-temperature characteristics. Temperature-retraction procedure (TR test)
BS ISO 8567:2002 BS ISO 8567:2002. Cinematography. Maximum permissible area for subtitle on 35 mm and 16 mm motion-picture release prints. Position and dimensions
BS 7S 80:2002 BS 7S 80:2002. High chromium-nickel corrosion resisting steel forging stock, bars, forgings and parts (880 to 1080 MPa: limiting ruling section 100 mm)
BS 598-100:2004 BS 598-100:2004. Sampling and examination of bituminous mixtures for roads and other paved areas. Methods for sampling for analysis
BS 598-101:2004 BS 598-101:2004. Sampling and examination of bituminous mixtures for roads and other paved areas. Methods for preparatory treatments of samples for analysis
BS 598-104:2005 BS 598-104:2005. Sampling and examination of bituminous mixtures for roads and other paved areas. Methods of test for the determination of density and compaction
BS EN 407:2004 BS EN 407:2004. Protective gloves against thermal risks (heat and/or fire)
BS EN 1052-3:2002 BS EN 1052-3:2002. Methods of test for masonry. Determination of initial shear strength
BS ISO 14835-2:2005 BS ISO 14835-2:2005. Mechanical vibration and shock. Cold provocation tests for the assessment of peripheral vascular function. Measurement and evaluation of finger systolic blood
BS 598-108:2005 BS 598-108:2005. Sampling and examination of bituminous mixtures for roads and other paved areas. Methods for determination of the condition of the binder on coated chippings and for m
BS ISO 16160:2005 BS ISO 16160:2005. Continuously hot-rolled steel sheet products. Dimensional and shape tolerances
BS ISO 16162:2005 BS ISO 16162:2005. Continuously cold-rolled steel sheet products. Dimensional and shape tolerances
BS ISO 844:2004 BS ISO 844:2004. Rigid cellular plastics. Determination of compression properties
BS ISO 16163:2005 BS ISO 16163:2005. Continuously hot-dipped coated steel sheet products. Dimensional and shape tolerances
BS ISO 13976:2005 BS ISO 13976:2005. Hot-rolled steel sheet in coils of structural quality and heavy thickness
DD 232:2005 DD 232:2005. Method for determination of the maximum binder content of bituminous mixtures without excessive binder drainage
ISO15916: 2004 EDTN.1 ISO15916: 2004 EDTN.1. ISO15916: 2004 Basic considerations for the safety of hydrogen systems
BS ISO 2467:2004 BS ISO 2467:2004. Cinematography. Image area produced by 65 mm/5 perforation motion-picture camera aperture and maximum projectable image area on 70 mm/5 perforation motion-picture pr
BS EN ISO 10423:2004 BS EN ISO 10423:2004. Petroleum and natural gas industries. Drilling and production equipment. Wellhead and christmas tree equipment (CD-ROM)
ISO14790 : 2005 EDTN2 ISO14790 : 2005 EDTN2. ISO14790 : 2005 Snowboard plate-bindings without a release mechanism - Requirements and test methods
ISO15344 : 2005 EDTN1 ISO15344 : 2005 EDTN1. ISO15344 : 2005 Snowboard step-in bindings - Requirements and test methods
BS EN ISO 10427-3:2004 BS EN ISO 10427-3:2004. Petroleum and natural gas industries. Equipment for well cementing. Performance testing of cementing float equipment
BSISO23717 : 2006 BSISO23717 : 2006. BSISO23717 : 2006 Steel wire and wire products - Hose reinforcement wire
ISO11402 : 2004 EDTN.2 ISO11402 : 2004 EDTN.2. ISO11402 : 2004 Phenolic, amino and condensation resins - Determination of free- formaldehyde content
BS EN 13554:2002 BS EN 13554:2002. Non-destructive testing. Acoustic emission. General principles
BS EN 61672-3:2006 BS EN 61672-3:2006. Electroacoustics. Sound level meters. Periodic tests
BS ISO 8005:2005 BS ISO 8005:2005. Carbonaceous materials used in the production of aluminium. Green and calcined coke. Determination of ash content
BS EN 62148-2:2003 BS EN 62148-2:2003. Fibre optic active components and devices. Package and interface standards. SFF MT-RJ 10-pin transceivers
BS EN 60352-5:2001, IEC 60352-5:2001 BS EN 60352-5:2001, IEC 60352-5:2001. Solderless connections. Press-in connections. General requirements, test methods and practical guidance
BS EN ISO 1872-2:2007 BS EN ISO 1872-2:2007. Plastics. Polyethylene (PE) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS ISO 23509:2006 BS ISO 23509:2006. Bevel and hypoid gear geometry
BS EN ISO 21671:2006 BS EN ISO 21671:2006. Dentistry. Rotary polishers
04/30110677 DC 04/30110677 DC. IEC 60050-614 ED.1. International Electrotechnical Vocabulary. Part 614. Electric power system. Power system and planning operation
BS ISO/IEC 14496-15:2004 BS ISO/IEC 14496-15:2004. Information technology. Coding of audio-visual objects. Advanced Video Coding (AVC) file format
BS EN 1814:2005 BS EN 1814:2005. Textile floor coverings. Determination of resistance to damage at cut edges using the modified Vettermann drum test
04/30110704 DC 04/30110704 DC. IEC CISPR 16-3 AMD 1. F3 ED 2. Specification for radio disturbance and immunity measuring apparatus and methods. Part 3. CISPR Technical Reports. Background material on
BS EN 55020:2002 BS EN 55020:2002. Sound and television broadcast receivers and associated equipment.Immunity characteristics. Limits and methods of measurement
BS ISO/IEC 10373-1:2006 BS ISO/IEC 10373-1:2006. Identification cards. Test methods. General characteristics
BS ISO/IEC 7816-12:2005 BS ISO/IEC 7816-12:2005. Identification cards. Integrated circuit cards. Cards with contacts. USB electrical interface and operating procedures
BS ISO/IEC 18013-1:2005 BS ISO/IEC 18013-1:2005. Information technology. Personal identification. ISO-compliant driving licence. Physical characteristics and basic data set
BS ISO 1268-8:2004 BS ISO 1268-8:2004. Fibre-reinforced plastics. Methods of producing test plates. Compression moulding of SMC and BMC
KIT 132 KIT 132. Flanges kit
BS ISO 1222:2003 BS ISO 1222:2003. Photography. Tripod connections
BS EN ISO 6360-4:2004 BS EN ISO 6360-4:2004. Dentistry. Number coding system for rotary instruments. Specific characteristics of diamond instruments
BS 0-1:2005 BS 0-1:2005. A standard for standards. Development of standards. Specification
BS EN ISO 6360-6:2004 BS EN ISO 6360-6:2004. Dentistry. Number coding system for rotary instruments. Specific characteristics of abrasive instruments
CWA 14924-1:2004 CWA 14924-1:2004. European guide to good practice in knowledge management. Knowledge management framework
CWA 14924-2:2004 CWA 14924-2:2004. European guide to good practice in knowledge management. Organizational culture
CWA 14924-3:2004 CWA 14924-3:2004. European guide to good practice in knowledge management. SME Implementation
CWA 14924-4:2004 CWA 14924-4:2004. European guide to good practice in knowledge management. Guidelines for measuring KM
CWA 14924-5:2004 CWA 14924-5:2004. European guide to good practice in knowledge management. KM terminology
CWA 14926:2004 CWA 14926:2004. Guidelines for the production of learner information standards and specifications
CWA 14927:2004 CWA 14927:2004. Recommendations on a model for expressing learner competencies
CWA 14928:2004 CWA 14928:2004. Review on SIF infrastructure, architecture, message processing and transport layer
CWA 14929:2004 CWA 14929:2004. Internationalisation of SIF and harmonisation with other specs/standards
CWA 14925:2004 CWA 14925:2004. Generic ICT skills profiles for the ICT supply industry. A review by CEN/ISSS ICT-Skills Workshop of the career space work
BS EN 61300-3-18:2006 BS EN 61300-3-18:2006. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Keying accuracy of an ang
BS EN 61300-3-24:2007 BS EN 61300-3-24:2007. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Keying accuracy of optica
BS EN 61291-1:2006 BS EN 61291-1:2006. Optical amplifiers. Generic specification
BS EN 61290-1-2:2005 BS EN 61290-1-2:2005. Optical amplifiers. Test methods. Power and gain parameters. Electrical spectrum analyzer method
BS EN ISO 12193:2004 BS EN ISO 12193:2004. Animal and vegetable fats and oils. Determination of lead by direct graphite furnace atomic absorption spectroscopy
BS EN 12385-1:2002 BS EN 12385-1:2002. Steel wire ropes. Safety. General requirements
BS EN ISO 21871:2006 BS EN ISO 21871:2006. Microbiology of food and animal feeding stuffs. Horizontal method for the determination of low numbers of presumptive Bacillus cereus. Most probable number t
BS EN 12697-18:2004 BS EN 12697-18:2004. Bituminous mixtures. Test methods for hot mix asphalt. Binder drainage
BS EN ISO 14673-2:2004 BS EN ISO 14673-2:2004. Milk and milk products. Determination of nitrate and nitrite contents. Method using segmented flow analysis (Routine method)
BS EN ISO 14673-3:2004 BS EN ISO 14673-3:2004. Milk and milk products. Determination of nitrate and nitrite contents. Method using cadmium reduction and flow injection analysis with in-line dialysis (
BS EN ISO 14673-1:2004 BS EN ISO 14673-1:2004. Milk and milk products. Determination of nitrate and nitrite contents. Method using cadmium reduction and spectrometry
BS EN 62310-2:2007 BS EN 62310-2:2007. Static transfer systems (STS). Electromagnetic compatibility (EMC) requirements
BS EN 1806:2006 BS EN 1806:2006. Chimneys Clay/ceramic flue blocks for single wall chimneys Requirements and test methods
BS 3289:2005 BS 3289:2005. Textile carcase conveyor belting for use in underground mines (including fire performance). Specification
BS 7291-1:2006 BS 7291-1:2006. Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings. General requirements
BS 7291-2:2006 BS 7291-2:2006. Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings. Specification for polybutylene (PB) pip
BS 7291-3:2006 BS 7291-3:2006. Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings. Specification for cross-linked polyethy
BS EN 14900:2006 BS EN 14900:2006. Textile floor coverings. Determination of the density of the textile fleece backing
BS EN 60079-7:2003 BS EN 60079-7:2003. Electrical apparatus for explosive gas atmospheres. Increased safety "e"
BS EN 61034-1:2005 BS EN 61034-1:2005. Measurement of smoke density of cables burning under defined conditions. Test apparatus
BS EN 61034-2:2005 BS EN 61034-2:2005. Measurement of smoke density of cables burning under defined conditions. Test procedure and requirements
BS EN 14255-2:2005 BS EN 14255-2:2005. Measurement and assessment of personal exposures to incoherent optical radiation. Visible and infrared radiation emitted by artificial sources in the workplace
BS EN 455-3:2006 BS EN 455-3:2006. Medical gloves for single use. Requirements and testing for biological evaluation
BS EN 1994-1-1:2004 BS EN 1994-1-1:2004. Eurocode 4. Design of composite steel and concrete structures. General rules and rules for buildings
BS EN 1994-1-2:2005 BS EN 1994-1-2:2005. Eurocode 4. Design of composite steel and concrete structures. General rules. Structural fire design
BS EN ISO 9018:2003 BS EN ISO 9018:2003. Destructive tests on welds in metallic materials. Tensile test on cruciform and lapped joints
BS EN ISO 16744:2003 BS EN ISO 16744:2003. Dentistry. Base metal materials for fixed dental restorations
BS EN ISO 3377-1:2002 BS EN ISO 3377-1:2002. Leather. Physical and mechanical tests. Determination of tear load. Single edge tear
BS EN ISO 5402:2002 BS EN ISO 5402:2002. Leather. Physical and mechanical tests. Determination of flex resistance by flexometer method
CWA 14172-3:2004 CWA 14172-3:2004. EESSI conformity assessment guidance. Trustworthy systems managing certificates for electronic signatures
CWA 14172-2:2004 CWA 14172-2:2004. EESSI conformity assessment guidance. Certification authority services and processes
CWA 14172-1:2004 CWA 14172-1:2004. EESSI conformity assessment guidance. General introduction
CWA 14890-1:2004 CWA 14890-1:2004. Application interface for smart cards used as secure signature creation devices. Basic requirements. Basic requirements
CWA 14947:2004 CWA 14947:2004. European econstruction architecture (EeA). Blueprint for an ICT system in construction
BS EN 14895:2006, BS 2000-542:2006 BS EN 14895:2006, BS 2000-542:2006. Bitumen and bituminous binders. Stabilisation of binder from bituminous emulsions or from cut-back and fluxed bituminous binders
CWA 14946:2004 CWA 14946:2004. European econstruction framework (EeF). Context and scope for econstruction
CWA 14172-4:2004 CWA 14172-4:2004. EESSI conformity assessment guidance. Signature-creation applications and general guidelines for electronic signature verification
CWA 14172-5:2004 CWA 14172-5:2004. EESSI conformity assessment guidance. Secure signature-creation devices
CWA 14172-6:2004 CWA 14172-6:2004. EESSI conformity assessment guidance. Signature-creation device supporting signatures other than qualified
CWA 14172-7:2004 CWA 14172-7:2004. EESSI conformity assessment guidance. Cryptographic modules used by certification service providers for signing operations and key generation services
CWA 14172-8:2004 CWA 14172-8:2004. EESSI conformity assessment guidance. Time-stamping authority services and processes
CWA 14355:2004 CWA 14355:2004. Guidelines for the implementation of secure signature-creation devices
CWA 14365-1:2004 CWA 14365-1:2004. Guide on the use of electronic signatures. Legal and technical aspects
CWA 14365-2:2004 CWA 14365-2:2004. Guide on the use of electronic signatures. Protection profile for software signature creation devices
CWA 14949:2004 CWA 14949:2004. funStep AP-application interpreted model, including validation guidelines
CWA 14950:2004 CWA 14950:2004. Implementation planning for AP236
CWA 14948:2004 CWA 14948:2004. Guidelines for XML/EDITEX messages in the textile/clothing sector
CWA 14050-29:2004 CWA 14050-29:2004. Extensions for financial services (XFS) interface specification. Release 3.02. XFS MIB architecture and SNMP extensions
CWA 14050-30:2004 CWA 14050-30:2004. Extensions for financial services (XFS) interface specification. Release 3.02. XFS MIB device specific definitions. Printer device
CWA 14050-31:2004 CWA 14050-31:2004. Extensions for financial services (XFS) interface specification. Release 3.02. XFS MIB device specific definitions. Identification card device class
CWA 14050-32:2004 CWA 14050-32:2004. Extensions for financial services (XFS) interface specification. Release 3.02. XFS MIB device specific definitions. Cash dispenser device class
CWA 14050-33:2004 CWA 14050-33:2004. Extensions for financial services (XFS) interface specification. Release 3.02. XFS MIB device specific definitions. PIN keypad device class
CWA 14050-34:2004 CWA 14050-34:2004. Extensions for financial services (XFS) interface specification. Release 3.02. XFS MIB device specific definitions. Check reader/scanner device class
CWA 14050-35:2004 CWA 14050-35:2004. Extensions for financial services (XFS) interface specification. Release 3.02. XFS MIB device specific definitions. Depository device class
CWA 14050-36:2004 CWA 14050-36:2004. Extensions for financial services (XFS) interface specification. Release 3.02. XFS MIB device specific definitions. Text terminal unit device class
BS EN 14896:2006, BS 2000-546:2006 BS EN 14896:2006, BS 2000-546:2006. Bitumen and bituminous binders. Dynamic viscosity of bituminous emulsions, cut-back and fluxed bituminous binders. Rotating spind
CWA 14050-37:2004 CWA 14050-37:2004. Extensions for financial services (XFS) interface specification. Release 3.02. XFS MIB device specific definitions. Sensors and indicators unit device class
CWA 14050-38:2004 CWA 14050-38:2004. Extensions for financial services (XFS) interface specification. Release 3.02. XFS MIB device specific definitions. Camera device class
CWA 14050-39:2004 CWA 14050-39:2004. Extensions for financial services (XFS) interface specification. Release 3.02. XFS MIB device specific definitions. Alarm device class
CWA 14050-40:2004 CWA 14050-40:2004. Extensions for financial services (XFS) interface specification. Release 3.02. XFS MIB device specific definitions. Card embossing unit device class
CWA 14050-41:2004 CWA 14050-41:2004. Extensions for financial services (XFS) interface specification. Release 3.02. XFS MIB device specific definitions. Cash in module device class
BS EN 13675:2004 BS EN 13675:2004. Safety of machinery. Safety requirements for tube forming and rolling mills and their finishing line equipment
BIP 2032:2003 BIP 2032:2003. Fire Safety. Questions and answers. A practical approach
BS EN 13245-1:2004 BS EN 13245-1:2004. Plastics. Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications. Designation of light coloured profiles
BS EN 60793-2-40:2006 BS EN 60793-2-40:2006. Optical fibres. Product specifications. Sectional specification for category A4 multimode fibres
BS EN 50214:2006 BS EN 50214:2006. Flat polyvinyl chloride sheathed flexible cables
BS ISO/IEC 14496-19:2004 BS ISO/IEC 14496-19:2004. Information technology. Coding of audio-visual objects. Synthesized texture stream
BS EN ISO 7380:2004 BS EN ISO 7380:2004. Hexagon socket button head screws
BS EN ISO 9886:2004 BS EN ISO 9886:2004. Ergonomics. Evaluation of thermal strain by physiological measurements
BS EN ISO 16264:2004, BS 6068-2.78:2002 BS EN ISO 16264:2004, BS 6068-2.78:2002. Water quality. Determination of soluble silicates by flow analysis (FIA and CFA) and photometric detection
PD ISO/IEC TR 14143-5:2004 PD ISO/IEC TR 14143-5:2004. Information technology. Software measurement. Functional size measurement. Determination of functional domains for use with functional size measu
BS EN 1124-4:2005 BS EN 1124-4:2005. Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems. Components for vacuum drainage systems and for dr
BS EN 1337-2:2004 BS EN 1337-2:2004. Structural bearings. Sliding elements
BS EN 1337-7:2004 BS EN 1337-7:2004. Structural bearings. Spherical and cylindrical PTFE bearings
ISO/IEC21481 : 2005 EDTN1 ISO/IEC21481 : 2005 EDTN1. ISO/IEC21481 : 2005 Information technology - Telecommunications and information exchange between systems - Near Field Communication Interface and P
WD/ISO/IEC9834-1 : 2005 EDTN 2 WD/ISO/IEC9834-1 : 2005 EDTN 2. ISO/IEC9834-1 : 2005 Information technology. Open Systems Interconnection. Procedures for operation of OSI Registration Authorities. Part
WD/ISO/IEC9834-3 : 2005 EDTN3 WD/ISO/IEC9834-3 : 2005 EDTN3. ISO/IEC9834-3 : 2005 Information technology - Open Systems Interconnection - Procedures for operation of OSI Registration Authorities . Par
ISO/IEC9834-6 : 2005 EDTN2 ISO/IEC9834-6 : 2005 EDTN2. ISO/IEC9834-6 : 2005 Information technology - Open Systems Interconnection - Procedures for operation of OSI registration authorities . Part 6 :
WD/ISO/IEC9834-7 : 2005 EDTN2 WD/ISO/IEC9834-7 : 2005 EDTN2. ISO/IEC9834-7 : 2005 Information technology - Open Systems Interconnection - Procedures for operation of OSI Registration Authorities . Par
BS ISO 13372:2004 BS ISO 13372:2004. Condition monitoring and diagnostics of machines. Vocabulary
BS EN 2085:2004 BS EN 2085:2004. Aerospace series. Aluminium alloy AL-P2618A-T6. Hand and die forgings. a ≤ 150 mm
BS EN 2086:2004 BS EN 2086:2004. Aerospace series. Aluminium alloy AL-P2618A-T851. Hand and die forgings. a ≤ 150 mm
BS EN 2681:2004 BS EN 2681:2004. Aerospace series. Aluminium alloy AL-P7010-T74. Hand and die forgings. a ≤ 150 mm
BS EN 2684:2004 BS EN 2684:2004. Aerospace series. Aluminium alloy AL-P7010-T7651. Plate. 6 mm < a ≤ 140 mm
BS EN 2687:2004 BS EN 2687:2004. Aerospace series. Aluminium alloy AL-P7010-T7451. Plate. 6 mm < a ≤ 160 mm
04/30111436 DC 04/30111436 DC. EN 50434. Safety of household and similar electrical appliances. Particular requirements for powered shredders
BS EN 3553:2004 BS EN 3553:2004. Aerospace series. Aluminium alloy AL-P2618A-T6511. Extruded bar and section. a or D ≤ 160 mm
BS IEC 61588:2004 BS IEC 61588:2004. Precision clock synchronization protocol for networked measurement and control systems
ISO23570-2 : 2005 EDTN1 ISO23570-2 : 2005 EDTN1. ISO23570-2 : 2005 Industrial automation systems and integration - Distributed installation in industrial applications. Part 2: Hybrid communication bus
ISO23570-1 : 2005 EDTN1 ISO23570-1 : 2005 EDTN1. ISO23570-1 : 2005 Industrial automation systems and integration - Distributed installationin industrial applications. Part 1: Sensors and actuators
BS 5163-2:2004 BS 5163-2:2004. Valves for waterworks purposes. Stem caps for use on isolating valves and associated water control apparatus. Specification
BS ISO/IEC 19794-8:2006 BS ISO/IEC 19794-8:2006. Information technology. Biometric data interchange formats. Finger pattern skeletal data
BS EN 15196:2006, BS 6068-5.43:2006 BS EN 15196:2006, BS 6068-5.43:2006. Water quality. Guidance on sampling and processing of the pupal exuviae of Chironomidae (Order Diptera) for ecological assessme
BS EN ISO 2897-2:2003 BS EN ISO 2897-2:2003. Plastics. Impact-resistant polystyrene (PS-I) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN 62040-1-2:2003 BS EN 62040-1-2:2003. Uninterruptible power systems (UPS). General and safety requirements for UPS used in restricted access locations
BS EN ISO 10993-12:2004 BS EN ISO 10993-12:2004. Biological evaluation of medical devices. Sample preparation and reference materials
BS EN 14227-10:2006 BS EN 14227-10:2006. Hydraulically bound mixtures. Specifications. Soil treated by cement
CWA 14169:2004 CWA 14169:2004. Secure signature-creation devices "EAL 4+"
ISO16100-3 : 2005 EDTN 1 ISO16100-3 : 2005 EDTN 1. ISO16100-3 : 2005 Industrial automation systems and integration - Manufacturing software capability profiling for interoperability. Part 3: Interface
BS 6100-1:2004, BS ISO 6707-1:2004 BS 6100-1:2004, BS ISO 6707-1:2004. Building and civil engineering. Vocabulary. General terms
BS ISO 8870:2006 BS ISO 8870:2006. Milk and milk-based products. Detection of thermonuclease produced by coagulase-positive staphylococci
BS EN 60384-2:2005 BS EN 60384-2:2005. Fixed capacitors for use in electronic equipment. Sectional specification: fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors
04/30111604 DC 04/30111604 DC. IEC 61994-4-4 ED.1. Piezoelectric and dielectric devices for frequency control and selection glossary. Part 4-4. Materials for SAW devices
BS EN 60384-2-1:2005 BS EN 60384-2-1:2005. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed metallized polyethtylene-terephthalate film dielectric D.C. capacitors. A
BS EN 60384-16:2005 BS EN 60384-16:2005. Fixed capacitors for use in electronic equipment. Sectional specification: fixed metallized polypropylene film dielectric d.c. capacitors
BS EN 60384-16-1:2005 BS EN 60384-16-1:2005. Fixed capacitors for use in electronic equipment. Blank detail specification: fixed metallized polypropylene film dielectric d.c. capacitors. Assessment le
BS EN 14908-1:2005 BS EN 14908-1:2005. Open data communication in building automation, controls and building management. Building network protocol. Protocol stack
BS EN 14908-2:2005 BS EN 14908-2:2005. Open data communication in building automation, controls and building management. Control network protocol. Twisted pair communication
BS EN 60384-17-1:2005 BS EN 60384-17-1:2005. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed metallized polypropylene film d ielectric a.c. and pulse capacitors. As
BS EN 60384-17:2005 BS EN 60384-17:2005. Fixed capacitors for use in electronic equipment. Sectional specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors
BS EN 60929:2004 BS EN 60929:2004. A.C. supplied electronic ballasts for tubular fluorescent lamps. Performance requirements
WD/ISO/IEC9834-8 : 2005 EDTN 1 WD/ISO/IEC9834-8 : 2005 EDTN 1. ISO/IEC9834-8 : 2005 Information technology. Open Systems Interconnection. Procedures for the operation of OSI Registration Authorities.
BS ISO 23205:2006 BS ISO 23205:2006. Agricultural tractors. Instructional seat
BS EN 14912:2005 BS EN 14912:2005. LPG equipment and accessories. Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylinders
BS EN 14913:2005 BS EN 14913:2005. LPG equipment and accessories. Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG). Alternative design and construction. Procedure for
BS EN 14914:2005 BS EN 14914:2005. LPG equipment and accessories. Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG). Alternative design and construction. Periodic inspe
BS ISO 24408:2005 BS ISO 24408:2005. Ships and marine technology. Position-indicating lights for life-saving appliances. Testing, inspection, and marking of production units
ISO4927 : 2005 EDTN2 ISO4927 : 2005 EDTN2. ISO4927 : 2005 Road vehicles - Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid
BS ISO 4927:2005 BS ISO 4927:2005. Road vehicles. Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 12
DD IEC/TS 60695-9-2:2005 DD IEC/TS 60695-9-2:2005. Fire hazard testing. Surface spread of flame. Summary and relevance of test methods
DD CEN/TS 13149-6:2005 DD CEN/TS 13149-6:2005. Public transport. Road vehicle scheduling and control systems. CAN message content
BS ISO 4141-2:2006 BS ISO 4141-2:2006. Road vehicles. Multi-core connecting cables. Test methods and requirements for high performance sheathed cables
BS ISO 4141-3:2006 BS ISO 4141-3:2006. Road vehicles. Multi-core connecting cables. Construction, dimensions and marking of unscreened sheathed low-voltage cables
BS EN ISO 6402-2:2003 BS EN ISO 6402-2:2003. Plastics. Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styre
BS EN 60652:2004 BS EN 60652:2004. Loading tests on overhead line structures
BS EN 13055-2:2004 BS EN 13055-2:2004. Lightweight aggregates. Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications
BS EN ISO 9692-1:2003 BS EN ISO 9692-1:2003. Welding and allied processes. Recommendations for joint preparation. Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and
BS 7376:2004 BS 7376:2004. Inclusion of glass in the construction of tables and trolleys. Specification
BS EN 926-1:2006 BS EN 926-1:2006. Paragliding equipment. Paragliders. Requirements and test methods for structural strength
BS EN 14254:2004 BS EN 14254:2004. In vitro diagnostic medical devices. Single-use receptacles for the collection of specimens, other than blood, from humans
BS EN ISO 2580-2:2003 BS EN ISO 2580-2:2003. Plastics. Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 11551:2003 BS EN ISO 11551:2003. Optics and optical instruments. Lasers and laser-related equipment. Test method for absorptance of optical laser components
BS EN ISO 20783-2:2003 BS EN ISO 20783-2:2003. Petroleum and related products. Determination of emulsion stability of fire-resistant fluids. Fluids in category HFB
BS ISO 17282:2004 BS ISO 17282:2004. Plastics. Guide to the acquisition and presentation of design data
BS EN ISO 293:2005 BS EN ISO 293:2005. Plastics. Compression moulding of test specimens of thermoplastic materials
BS EN ISO 11337:2004 BS EN ISO 11337:2004. Plastics. Polyamides. Determination of e-caprolactam and w-laurolactum by gas chromatography
BS ISO 8600-6:2005 BS ISO 8600-6:2005. Optics and photonics. Medical endoscopes and endotherapy devices. Vocabulary
BS EN ISO 6385:2004 BS EN ISO 6385:2004. Ergonomic principles in the design of work systems
BS EN ISO 4029:2003 BS EN ISO 4029:2003. Hexagon socket set screws with cup point
BS EN ISO 4026:2003 BS EN ISO 4026:2003. Hexagon socket set screws with flat point
ISO/IEC21000-15 : 2006 EDTN 1 ISO/IEC21000-15 : 2006 EDTN 1. Information technology. Multimedia Framework (MPEG-21). Part 15 : Event Reporting
BS ISO 10594:2006 BS ISO 10594:2006. Micrographics. Rotary camera systems. Test target for checking performance
BS EN ISO 13706:2005 BS EN ISO 13706:2005. Petroleum, petrochemical and natural gas industries. Air-cooled heat exchangers
BS EN 14907:2005 BS EN 14907:2005. Ambient air quality. Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
BS ISO/IEC 18000-7:2004 BS ISO/IEC 18000-7:2004. Information technology. Radio frequency identification for item management. Parameters for active air interface communications at 433 MHz
BS EN 14899:2005 BS EN 14899:2005. Characterization of waste. Sampling of waste materials. Framework for the preparation and application of a sampling plan
PD 6079-4:2006 (Book) PD 6079-4:2006 (Book). Project management. Guide to project management in the construction industry
ISO17874-5 : 2007 EDTN1 ISO17874-5 : 2007 EDTN1. ISO17874-5 : 2007 Remote handling devices for radioactive materials. Part 5: Remote handling tongs
BS ISO 4650:2005 BS ISO 4650:2005. Rubber. Identification. Infrared spectrometric method
ISO16010 : 2005 EDTN1 (R08) ISO16010 : 2005 EDTN1 (R08). ISO16010 : 2005 Elastomeric seals - Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids
ISO/IEC19752 : 2004 EDTN1 ISO/IEC19752 : 2004 EDTN1. ISO/IEC 19752 : 2004 Information technology -- Method for the determination of toner cartridge yield for monochromatic electrophotographic printers
BS ISO 3858:2004 BS ISO 3858:2004. Rubber compounding ingredients. Carbon black. Determination of light transmittance of toluene extract
06/30112035 DC 06/30112035 DC. ISO 9241-302. Ergonomics of human-system interaction. Part 302. Terminology for electronic visual displays
06/30112038 DC 06/30112038 DC. EN ISO 9241-303. Ergonomics of human-system interaction. Part 303. Requirements for electronic visual displays
06/30112046 DC 06/30112046 DC. EN ISO 9241-305. Ergonomics of human-system interaction. Part 305. Optical laboratory test methods for electronic visual displays
06/30112049 DC 06/30112049 DC. EN ISO 9241-306. Ergonomics of human-system interaction. Part 306. Field assessment methods for electronic visual displays
06/30112054 DC 06/30112054 DC. EN ISO 9241-307. Ergonomics of human-system interaction. Part 307. Analysis and compliance test methods for electronic visual displays
DD ISO/TS 19139:2007 DD ISO/TS 19139:2007. Geographic information. Metadata. XML schema implementation
BS EN 2072:2005 BS EN 2072:2005. Aerospace series. Aluminium AL-P1050A. H14. Sheet and strip. 0,4 mm ≤ a ≤ 6 mm
BS EN ISO 23429:2004 BS EN ISO 23429:2004. Gauging of hexagon sockets
BS ISO 17129:2006 BS ISO 17129:2006. Milk and milk products. Determination of soy and pea proteins using capillary electrophoresis in the presence of sodium dodecyl sulfate (SDS-CE). Screening method
BS EN ISO 10272-1:2006 BS EN ISO 10272-1:2006. Microbiology of food and animal feeding stuffs. Horizontal method for detection and enumeration of Campulobacter spp. Detection method
BS EN ISO 9142:2003 BS EN ISO 9142:2003. Adhesives. Guide to the selection of standard laboratory ageing conditions for testing bonded joints
BS EN ISO 10366-2:2003 BS EN ISO 10366-2:2003. Plastics. Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials. Preparation of test specimens and determination of
BS EN ISO 20783-1:2003 BS EN ISO 20783-1:2003. Petroleum and related products. Determination of emulsion stability of fire-resistant fluids. Fluids in category HFAE
BS EN 2087:2005 BS EN 2087:2005. Aerospace series. Aluminium alloy AL-P2014A. T6 or T62. Clad sheet & strip 0,4 mm ≤ a ≤ 6 mm
ISO10303-41 : 2005 EDTN3 ISO10303-41 : 2005 EDTN3. ISO10303-41 : 2005 Industrial automation systems and integration - Product data representation and exchange - . Integrated generic resource: Fundamen
ISO14649-121 : 2005 EDTN1 ISO14649-121 : 2005 EDTN1. ISO14649-121 : 2005 Industrial automation systems and integration - Physical device control - Data model for computerized numerical controllers. Pa
ISO14649-12 : 2005 EDTN1 ISO14649-12 : 2005 EDTN1. ISO14649-12 : 2005 Industrial automation systems and integration - Physical device control - Data model for computerized numerical controllers -. Par
ISO15531-42 : 2005 EDTN1 ISO15531-42 : 2005 EDTN1. ISO15531-42 : 2005 Industrial automation systems and integration - Industrial manufacturing management data -. - Time Model
BS EN 62271-201:2006 BS EN 62271-201:2006. High voltage switchgear and controlgear. A.C. insulation-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
BS IEC 60747-5-4:2006 BS IEC 60747-5-4:2006. Semiconductor devices. Discrete devices. Optoelectronic devices. Semiconductor lasers
BS EN ISO 5667-3:2003, BS 6068-6.3:2003 BS EN ISO 5667-3:2003, BS 6068-6.3:2003. Water quality. Sampling. Guidance on the preservation and handling of water samples
BS EN 50289-3-10:2004 BS EN 50289-3-10:2004. Communication cables. Specifications for tests methods. Mechanical test methods. Torsion and twisting
BS EN 50289-1-12:2005 BS EN 50289-1-12:2005. Communication cables. Specifications for test methods. Electrical test methods. Inductance
BS 7967-4:2007 BS 7967-4:2007. Carbon monoxide in dwellings and the combustion performance of gas-fired appliances. Guide for using electronic portable combustion gas analysers as part of the process
BS ISO 22314:2006 BS ISO 22314:2006. Plastics. Glass-fibre-reinforced products. Determination of fibre length
BS ISO 14520-2:2006 BS ISO 14520-2:2006. Gaseous fire-extinguishing systems. Physical properties and system design. CF3I extinguishant
BS ISO 14520-5:2006 BS ISO 14520-5:2006. Gaseous fire-extinguishing systems. Physical properties and system design. FK-5-1-12 extinguishant
BS ISO 11529-1:2005 BS ISO 11529-1:2005. Milling cutters. Designation. Shank-type end mills of solid or tipped design
BS ISO 14520-6:2006 BS ISO 14520-6:2006. Gaseous fire-extinguishing systems. Physical properties and system design. HCFC blend A extinguishant
BS ISO 14520-8:2006 BS ISO 14520-8:2006. Gaseous fire-extinguishing systems. Physical properties and system design. HFC 125 extinguishant
BS ISO 11529-2:2005 BS ISO 11529-2:2005. Milling cutters. Designation. Shank-type and bore-type milling cutters with indexable inserts
BS ISO 14520-9:2006 BS ISO 14520-9:2006. Gaseous fire-extinguishing systems. Physical properties and system design. HFC 227ea extinguishant
BS ISO 14520-10:2005 BS ISO 14520-10:2005. Gaseous fire-extinguishing systems. Physical properties and system design. HFC 23 extinguishant
BS ISO 14520-11:2005 BS ISO 14520-11:2005. Gaseous fire-extinguishing systems. Physical properties and system design. HFC 236fa extinguishant
BS ISO 14520-12:2005 BS ISO 14520-12:2005. Gaseous fire-extinguishing systems. Physical properties and system design. IG-01 extinguishant
BS ISO 14520-13:2005 BS ISO 14520-13:2005. Gaseous fire-extinguishing systems. Physical properties and system design. IG-100 extinguishant
BS ISO 14520-14:2005 BS ISO 14520-14:2005. Gaseous fire-extinguishing systems. Physical properties and system design. IG-55 extinguishant
BS ISO 14520-15:2005 BS ISO 14520-15:2005. Gaseous fire-extinguishing systems. Physical properties and system design. IG-541 extinguishant
BS EN 357:2004 BS EN 357:2004. Glass in building. Fire resistant glazed elements with transparent or translucent glass products. Classification of fire resistance
BS EN ISO 5817:2003 BS EN ISO 5817:2003. Welding. Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded). Quality levels for imperfections
BS EN 12542:2002 BS EN 12542:2002. Static welded cylindrical tanks, serially produced for the storage of liquefied petroleum gas (LPG) having a volume not greater than 13 m3 and for installation above
BS EN ISO 1183-1:2004 BS EN ISO 1183-1:2004. Plastics. Methods for determining the density of non-cellular plastics. Immersion method, liquid pyknometer method and titration method
BS EN ISO 295:2004 BS EN ISO 295:2004. Plastics. Compression moulding of test specimens of thermosetting materials
BS 598-102:2003 BS 598-102:2003. Sampling and examination of bituminous mixtures for roads and other paved areas. Analytical test methods
DD CLC/TS 50134-7:2003 DD CLC/TS 50134-7:2003. Alarm systems. Social alarm systems. Application guidelines
BS EN 62286:2004 BS EN 62286:2004. Service diagnostic interface for consumer electronics products and networks. Implementation for IEEE 1394
BS EN 60247:2004 BS EN 60247:2004. Insulating liquids. Measurement of relative permittivity, dielectric dissipation factor (tan δ) and d.c. resistivity
BS EN 61076-3-104:2006 BS EN 61076-3-104:2006. Connectors for electronic equipment. Product requirements. Detail specification for 8-way, shielded free and fixed connectors for data transmissions with
04/30112330 DC 04/30112330 DC. IEC 61076-3-113 ED.1. Connectors for electronic equipment. Part 3-113. Screened, serial multi-conductor cable to board connectors suitable for 10 Gbit/sec data rates
BS EN 13630-9:2004 BS EN 13630-9:2004. Explosives for civil uses. Detonating cords and safety fuses. Determination of transmission of detonation from detonating cord to detonating cord
BS EN 13763-15:2004 BS EN 13763-15:2004. Explosives for civil uses. Detonators and relays. Determination of equivalent initiating capability
BS EN 13763-1:2004 BS EN 13763-1:2004. Explosives for civil uses. Detonators and relays. Requirements
BS EN 13763-13:2004 BS EN 13763-13:2004. Explosives for civil uses. Detonators and relays. Determination of resistance of electric detonators against electrostatic discharge
BS EN 13763-25:2004 BS EN 13763-25:2004. Explosives for civil uses. Detonators and relays. Determination of transfer capability of surface connectors, relay and coupling accessories
BS EN ISO 4623-2:2004, BS 3900-F20:2004 BS EN ISO 4623-2:2004, BS 3900-F20:2004. Paints and varnishes. Determination of resistance to filiform corrosion. Aluminium substrates
BS EN 13938-6:2004 BS EN 13938-6:2004. Explosives for civil uses. Propellants and rocket propellants. Solid rocket propellants. Guide for the determination of integrity of inhibitor coatings
BS EN 14397-2:2004 BS EN 14397-2:2004. Fertilizers and liming materials. Determination of carbon dioxide. Method for liming materials
BS EN 13746:2004 BS EN 13746:2004. Surfaces for sports areas. Determination of dimensional changes due to the effect of varied water, frost and heat conditions
BS ISO 5344:2004 BS ISO 5344:2004. Electrodynamic vibration generating systems. Performance characteristics
BS EN 1149-1:2006 BS EN 1149-1:2006. Protective clothing. Electrostatic properties. Test method for measurement of surface resistivity
DD CEN/TS 15213-1:2005 DD CEN/TS 15213-1:2005. Road transport and traffic telematics. After-theft systems for the recovery of stolen vehicles. Reference architecture and terminology
ISO/IECTR11802-1 : 2005 EDTN4 ISO/IECTR11802-1 : 2005 EDTN4. ISO/IECTR11802-1 : 2005 Information technology - Telecommunications and information exchange between systems - Local and metropolitan area
ISO/IECTR11802-2 : 2005 EDTN6 ISO/IECTR11802-2 : 2005 EDTN6. ISO/IECTR11802-2 : 2005 Information technology - Telecommunications and information exchange between systems - Local and metropolitan area
BS EN 140401-803:2002 BS EN 140401-803:2002. Detail specification. Fixed low power non wire-wound surface mount (SMD) resistors. Cylindrical. Stability classes 0,05; 0,1; 0,25; 0,5; 1; 2
BS EN 13775-5:2004 BS EN 13775-5:2004. Railway applications. Measuring of new and modified freight wagons. Bogies with 3 wheelsets
BS EN 13775-6:2004 BS EN 13775-6:2004. Railway applications. Measuring of new and modified freight wagons. Multiple and articulated freight wagons
BS EN 13775-4:2004 BS EN 13775-4:2004. Railway applications. Measuring of new and modified freight wagons. Bogies with 2 wheelsets
BS EN 622-5:2006 BS EN 622-5:2006. Fibreboards. Specifications. Requirements for dry process boards (MDF)
BS EN ISO 18369-2:2006 BS EN ISO 18369-2:2006. Ophthalmic optics. Contact lenses. Tolerances
BS EN ISO 18369-3:2006 BS EN ISO 18369-3:2006. Ophthalmic optics. Contact lenses. Measurement methods
BS EN ISO 18369-4:2006 BS EN ISO 18369-4:2006. Ophthalmic optics. Contact lenses. Physicochemical properties of contact lens materials
BS EN ISO 9337-2:2004 BS EN ISO 9337-2:2004. Contact lenses. Determination of back vertex power. Measurement of contact lenses immersed in saline
BS ISO 7169:2007 BS ISO 7169:2007. Aerospace. Separable tube fittings for fluid systems, for 24° cones, for pressures up to 3000 psi or 21000 kPa. Procurement specification, inch/metric
BS EN 14945:2005 BS EN 14945:2005. Refractory products and materials. Spectrometric determination of chromium (VI) in chrome bearing refractories, before and after use
04/30112526 DC 04/30112526 DC. IEC 62313 ED.1. Ferrite cores. Shapes and dimensions for planar magnetics applications
BS EN 13990:2004 BS EN 13990:2004. Wood flooring. Solid softwood floor boards
BS EN 61185:2005 BS EN 61185:2005. Ferrite cores (ETD-cores) intended for use in power supply applications. Dimensions
BS EN 302-1:2004 BS EN 302-1:2004. Adhesives for load bearing timber structures. Test methods. Determination of bond strength in longitudinal tensile shear strength
BS EN 1756-2:2004 BS EN 1756-2:2004. Tail lifts. Platform lifts for mounting on wheeled vehicles. Safety requirements. Tail lifts for passengers
BS EN 302-2:2004 BS EN 302-2:2004. Adhesives for load-bearing timber structures. Test methods. Determination of resistance to delamination
PD ISO/TR 13569:2005 PD ISO/TR 13569:2005. Financial services. Information security guidelines
BS EN 60205:2006 BS EN 60205:2006. Calculation of the effective parameters of magnetic piece parts
BS 2543:2004 BS 2543:2004. Upholstery fabrics for end use applications. Classification
BS EN 62333-1:2006 BS EN 62333-1:2006. Noise suppression sheet for digital devices and equipment. Definitions and general properties
BS EN 62333-2:2006 BS EN 62333-2:2006. Noise suppression sheet for digital devices and equipment. Measuring methods
BIP 2035:2004 BIP 2035:2004. IEE On-site Guide (BS 7671:2001, 16th edition Wiring Regulations including Amendments 1 & 2:2004)
BS EN 60034-8:2002 BS EN 60034-8:2002. Rotating electrical machines. Terminal markings and direction of rotation
BS EN 61332:2005 BS EN 61332:2005. Soft ferrite material classification
BS EN 584-1:2006 BS EN 584-1:2006. Non-destructive testing. Industrial radiographic film. Classification of film systems for industrial radiography
ISO/TS11139 : 2006 EDTN2 ISO/TS11139 : 2006 EDTN2. ISO/TS11139 : 200 Sterilization of health care products - Vocabulary
PD CEN ISO/TR 25107:2006 PD CEN ISO/TR 25107:2006. Non-destructive testing. Guidelines for NDT training syllabuses
BS EN 60740-1:2005 BS EN 60740-1:2005. Laminations for transformers and inductors. Mechanical and electrical characteristics
04/30112659 DC 04/30112659 DC. IEC 62398 ED.1. Technology approval schedule for ferrite cores
BS EN 61810-7:2006 BS EN 61810-7:2006. Electromechanical elementary relays. Test and measurement procedures
PD CEN ISO/TR 25108:2006 PD CEN ISO/TR 25108:2006. Non-destructive testing. Guidelines for NDT personnel training organizations
BS EN ISO 14644-8:2006 BS EN ISO 14644-8:2006. Cleanrooms and associated controlled environments. Classification of airborne molecular contamination
BS EN 61400-11:2003 BS EN 61400-11:2003. Wind turbine generator systems. Acoustic noise measurement techniques
BS EN 60068-2-21:2006 BS EN 60068-2-21:2006. Environmental testing. Tests. Test U. Robustness of terminations and integral mounting devices
BS EN 50347:2001 BS EN 50347:2001. General purpose three-phase induction motors having standard dimensions and outputs. Frame numbers 56 to 315 and flange numbers 65 to 740
BS EN 60044-5:2004 BS EN 60044-5:2004. Instrument transformers. Capacitor voltage transformers
BS EN 1856-2:2004 BS EN 1856-2:2004. Chimneys. Requirements for metal chimneys. Metal liners and connecting flue pipes
BS EN 61966-9:2004 BS EN 61966-9:2004. Multimedia systems and equipment. Colour measurement and management. Digital cameras
BS ISO 15198:2004 BS ISO 15198:2004. Clinical laboratory medicine. In vitro diagnostic medical devices. Validation of user quality control procedures by the manufacturer
BS EN 302-6:2004 BS EN 302-6:2004. Adhesives for load-bearing timber structures. Test methods. Determination of the conventional pressing time.
BS EN 302-7:2004 BS EN 302-7:2004. Adhesives for load-bearing timber structures. Test methods. Determination of the conventional working life
BS EN 15042-1:2006 BS EN 15042-1:2006. Thickness measurement of coatings and characterization of surfaces with surface waves. Guide to the determination of elastic constants, density and thickness of
BS EN 15042-2:2006 BS EN 15042-2:2006. Thickness measurement of coatings and characterization of surfaces with surface waves. Guide to the thickness measurement of coatings by photothermic method
ISO/TS20452 : 2007 EDTN1 ISO/TS20452 : 2007 EDTN1. ISO/TS 20452:2007 Requirements and Logical Data Model for a Physical Storage Format (PSF) and an Application Program Interface(API) and Logical Data
BS ISO 11568-1:2005 BS ISO 11568-1:2005. Banking. Key management (retail). Principles
BS ISO 9564-2:2005 BS ISO 9564-2:2005. Banking. Personal identification number management and security. Approved algorithms for PIN encipherment
BS EN 13621:2004 BS EN 13621:2004. Food processing machinery. Salad dryers. Safety and hygiene requirements
BS EN ISO 4259:2006, BS 2000-367:2006 BS EN ISO 4259:2006, BS 2000-367:2006. Petroleum products. Determination and application of precision data in relation to methods of test
PD 7504:2005 PD 7504:2005. Knowledge management in the public sector. A guide to good practice
PD 7505:2005 PD 7505:2005. Skills for knowledge working. A guide to good practice
PD 7506:2005 PD 7506:2005. Linking knowledge management with other organizational functions and disciplines. A guide to good practice
BS EN 13439:2003 BS EN 13439:2003. Packaging. Rate of energy recovery. Definition and method of calculation
BS ISO/IEC 15963:2004 BS ISO/IEC 15963:2004. Information technology. Radio-frequency identification for item management. Unique identification for RF tags
BS IEC 60748-23-5:2003 BS IEC 60748-23-5:2003. Semiconductor devices. Integrated circuits. Hybrid integrated circuits and film structures. Manufacturing line certification. Procedure for qualification
PD IEC/TR 60825-8:2006 PD IEC/TR 60825-8:2006. Safety of laser products. Guidelines for the safe use of laser beams on humans
BSISO/IEC14772-2 : 2004 (COVERS) BSISO/IEC14772-2 : 2004 (COVERS). Information technology. Computer graphics and image processing. The Virtual Reality Modelling Language (VRML). External authoring int
BSISO/IEC14772-2 : 2004 (CD-ROM) BSISO/IEC14772-2 : 2004 (CD-ROM).
BS ISO 17398:2004 BS ISO 17398:2004. Safety colours and safety signs. Classification, performance and durability of safety signs
BS ISO 16069:2004 BS ISO 16069:2004. Graphical symbols. Safety signs. Safety way guidance systems (SWGS)
BS ISO 9128:2006 BS ISO 9128:2006. Road vehicles. Graphical symbols to designate brake fluid types
PD CISPR/TR 29:2004 PD CISPR/TR 29:2004. Television broadcast receivers and associated equipment. Immunity characteristics. Methods of objective picture assessment
BS ISO 14635-3:2005 BS ISO 14635-3:2005. Gears. FZG test procedures. FZG test method A/2, 8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases
04/30112991 DC 04/30112991 DC. ISO 13041-2. Test conditions for numerically controlled turning machines and turning centres. Part 2. Geometric tests for machines with a vertical workholding spindle
BS ISO 1926:2005 BS ISO 1926:2005. Rigid cellular plastics. Determination of tensile properties
BS EN 50107-1:2002 BS EN 50107-1:2002. Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV. General requirements
BS EN 302-4:2004 BS EN 302-4:2004. Adhesives for load-bearing timber structures. Test methods. Determination of the effects of wood shrinkage on the shear strength
BS EN 1337-6:2004 BS EN 1337-6:2004. Structural bearings. Rocker bearings
BS ISO 13887:2004 BS ISO 13887:2004. Cold-reduced steel sheet of higher yield strength with improved formability
BS EN 61360-1:2002, IEC 61360-1:2002 BS EN 61360-1:2002, IEC 61360-1:2002. Standard data element types with associated classification scheme for electric components. Definitions. Principles and method
BS EN ISO 7376:2003 BS EN ISO 7376:2003. Anaesthetic and respiratory equipment. Laryngoscopes for tracheal intubation
BS EN ISO 20843:2003 BS EN ISO 20843:2003. Petroleum and related products. Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC
BS ISO 2597-1:2006 BS ISO 2597-1:2006. Iron ores. Determination of total iron content. Titrimetric method after tin (II) chloride reduction
BS ISO 13313:2006 BS ISO 13313:2006. Iron ores. Determination of sodium. Flame atomic absorption spectrometric method
BS ISO 13312:2006 BS ISO 13312:2006. Iron ores. Determination of potassium. Flame atomic absorption spectrometric method
BS ISO 10204:2006 BS ISO 10204:2006. Iron ores. Determination of magnesium. Flame atomic absorption spectrometric method
BS ISO 10203:2006 BS ISO 10203:2006. Iron ores. Determination of calcium. Flame atomic absorption spectrometric method
BS ISO 4688-1:2006 BS ISO 4688-1:2006. Iron ores. Determination of aluminium. Flame atomic absorption spectrometric method
BS ISO 9686:2006 BS ISO 9686:2006. Direct reduced iron. Determination of carbon and/or sulfur. High-frequency combustion method with infrared measurement
ISO6182-2 : 2005 EDTN2 ISO6182-2 : 2005 EDTN2. ISO6182-2 : 2005 Fire protection - Automatic sprinkler systems. Part 2: Requirements and test methods for wet alarm valves, retard chambers and water mot
ISO6182-3 : 2005 EDTN2 ISO6182-3 : 2005 EDTN2. ISO6182-3 : 2005 Fire protection - Automatic sprinkler systems. Part 3: Requirements and test methods for dry pipe valves
ISO6182-5 : 2006 EDTN 2 ISO6182-5 : 2006 EDTN 2. ISO6182-5 : 2006 Fire protection - Automatic sprinkler systems. Part 5: Requirements and test methods for deluge valves
ISO6182-6 : 2006 EDTN 1 ISO6182-6 : 2006 EDTN 1. ISO6182-6 : 2006 Fire protection - Automatic sprinkler systems. Part 6: Requirements and test methods for check valves
ISO6182-8 : 2006 EDTN 1 ISO6182-8 : 2006 EDTN 1. ISO6182-8 : 2006 Fire protection - Automatic sprinkler systems. Part 8: Requirements and test methods for pre-action dry alarm valves
BS EN ISO 105-B06:2004 BS EN ISO 105-B06:2004. Textiles. Tests for colour fastness. Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
DD IEC/TS 62257-6:2005 DD IEC/TS 62257-6:2005. Recommendations for small renewable energy and hybrid systems for rural electrification. Acceptance, operation, maintenance and replacement
BS EN 60384-24:2006 BS EN 60384-24:2006. Fixed capacitors for use in electronic equipment. Sectional specification. Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid e
BS ISO 8178-11:2006 BS ISO 8178-11:2006. Reciprocating internal combustion engines. Exhaust emission measurement. Test-bed measurement of gaseous and particulate exhaust emissions from engines used in
BS EN 60384-24-1:2006 BS EN 60384-24-1:2006. Fixed capacitors for use in electronic equipment. Blank detail specification. Surface mount fixed tantalum electrolytic capacitors with conductive polymer
PD CR 13686:2001 PD CR 13686:2001. Packaging. Optimzation of energy recovery from packaging waste
BS EN 60384-25:2006 BS EN 60384-25:2006. Fixed capacitors for use in electronic equipment. Sectional specification. Surface mount fixed aluminium electrolytic capacitors with conductive polymer solid
BS EN 14591-2:2007 BS EN 14591-2:2007. Explosion prevention and protection in underground mines. Protective systems. Passive water trough barriers
BS EN 60384-25-1:2006 BS EN 60384-25-1:2006. Fixed capacitors for use in electronic equipment. Blank detail specification. Surface mount fixed aluminium electrolytic capacitors with conductive polymer
BS ISO 21507:2005 BS ISO 21507:2005. Earth-moving machinery. Performance requirements for non-metallic fuel tanks
BS 7775:2005 BS 7775:2005. Penstocks for use in water and other liquid flow applications. Specification
BS EN 13864:2004 BS EN 13864:2004. Surfaces for sports areas. Determination of tensile strength of synthetic yarns
04/30113267 DC 04/30113267 DC. IEC 60825-1 AMD 3. Separation (removal) of the user's guide from section 3 of IEC 60825-1
BS EN ISO 9038:2003 BS EN ISO 9038:2003. Test for sustained combustibility of liquids
BS EN 13755:2002 BS EN 13755:2002. Natural stone. Test methods. Determination of water absorption at atmospheric pressure
BS EN 309:2005 BS EN 309:2005. Particleboards. Definition and classification
BS EN 14435:2004 BS EN 14435:2004. Respiratory protective devices. Self-contained open-circuit compressed air breathing apparatus with half mask designed to be used with positive pressure only. Requir
BS EN 10216-3:2002 BS EN 10216-3:2002. Seamless steel tubes for pressure purposes. Technical delivery conditions. Alloy fine grain steel tubes
BS EN 10216-1:2002 BS EN 10216-1:2002. Seamless steel tubes for pressure purposes. Technical delivery conditions
BS EN 10216-4:2002 BS EN 10216-4:2002. Seamless steel tubes for pressure purposes. Technical delivery conditions
BS EN 140401-802:2002 BS EN 140401-802:2002. Detail Specification: Fixed low power non wire-wound surface mount(SMD) resistors. Rectangular. Stability classes 1; 2
BS EN ISO 4263-3:2006 BS EN ISO 4263-3:2006. Petroleum and related products. Determination of the ageing behaviour of inhibited oils and fluids. TOST test. Anhydrous procedure for synthetic hydraulic
DD CEN/TS 14918:2005 DD CEN/TS 14918:2005. Solid biofuels. Method for the determination of calorific value
ISO4263-4 : 2006 EDTN1 ISO4263-4 : 2006 EDTN1. ISO4263-4 : 2006 Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test. Part 4: Procedure for i
BS EN ISO 4263-4:2006 BS EN ISO 4263-4:2006. Petroleum and related products. Determination of the ageing behaviour of inhibited oils and fluids. TOST test. Procedure for industrial gear oils
BS EN ISO 3170:2004, BS 2000-475:2004 BS EN ISO 3170:2004, BS 2000-475:2004. Methods of test for petroleum and its products. BS 2000-475: Petroleum liquids. Manual sampling
BS EN 62040-1-1:2003 BS EN 62040-1-1:2003. Uninterruptible power systems (UPS). General and safety requirements for UPS used in operator access areas
BS EN 14124:2004 BS EN 14124:2004. Inlet valves for flushing cisterns with internal overflow
BS EN 14039:2004 BS EN 14039:2004. Characterization of waste. Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography.
BS 8449:2005 BS 8449:2005. Building and construction sealants with movement accommodation factors greater than 25%. Method of test for determination of adhesion/cohesion properties at variable tempera
PD ISO/IEC TR 10032:2003 PD ISO/IEC TR 10032:2003. Information technology. Reference model of data management
BSISO/IEC15948 : 2004 (CD-ROM) BSISO/IEC15948 : 2004 (CD-ROM).
BSISO/IEC15948 : 2004 (COVERS) BSISO/IEC15948 : 2004 (COVERS).
BS EN 61005:2004 BS EN 61005:2004. Radiation protection instrumentation. Neutron ambient dose equivalent (rate) meters
04/30113480 DC 04/30113480 DC. CEN ISO/TS 14822-2. Traffic and Travel Information. Medium-range pre-information via DSRC. General specification. Part 2. Uplink
BS 5391-1:2006 BS 5391-1:2006. Acrylonitrile-butadiene-styrene (ABS) pressure pipe. Specification
BS 5392-1:2006 BS 5392-1:2006. Acrylonitrile-butadiene-styrene (ABS) fittings for use with ABS pressure pipe. Specification
BS EN 13516:2002 BS EN 13516:2002. Footwear. Test methods for uppers, lining and insocks. Colour fastness to rubbing
BS EN 13400:2002 BS EN 13400:2002. Footwear. Sampling location, preparation and duration of conditioning of samples and test pieces
BS EN 13511:2002 BS EN 13511:2002. Footwear. Test methods for uppers. Resistance to damage on lasting
BS EN 13513:2002 BS EN 13513:2002. Footwear. Test methods for uppers. Deformability
BS EN 13571:2002 BS EN 13571:2002. Footwear. Test methods for uppers, lining and insocks. Tear strength
BS ISO 21308-2:2006 BS ISO 21308-2:2006. Road vehicles. Product data exchange between chassis and bodywork manufacturers (BEP). Dimensional bodywork exchange parameters
BS EN 4287:2005 BS EN 4287:2005. Aerospace series. Aluminium alloy AL-P7010. Forging stock
BS EN 2486:2005 BS EN 2486:2005. Aerospace series. Aluminium alloy AL-P2618A. Forging stock
BS ISO 6055:2004 BS ISO 6055:2004. Industrial trucks. Overhead guards. Specification and testing
BS ISO 19932-1:2006 BS ISO 19932-1:2006. Equipment for crop protection. Knapsack sprayers. Requirements and test methods
BS ISO 19932-2:2006 BS ISO 19932-2:2006. Equipment for crop protection. Knapsack sprayers. Performance limits
BS ISO 8600-5:2005 BS ISO 8600-5:2005. Optics and photonics. Medical endoscopes and endotherapy devices. Determination of optical resolution of rigid endoscopes with optics
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
