BIS Standards Catalogue
BS EN 62013-1:2006 BS EN 62013-1:2006. Caplights for use in mines susceptible to firedamp. General requirements. Construction and testing in relation to the risk of explosion
BS EN 62013-2:2006 BS EN 62013-2:2006. Caplights for use in mines susceptible to firedamp. Performance and other safety-related matters
BS EN 1074-6:2004 BS EN 1074-6:2004. Valves for water supply. Fitness for purpose requirements and appropriate verification tests. Hydrants
BS EN 14803:2006 BS EN 14803:2006. Identification and/or determination of the quantity of waste
BS EN ISO 15236-2:2004 BS EN ISO 15236-2:2004. Steel cord conveyor belts. Preferred belt types
BS EN ISO 15236-4:2004 BS EN ISO 15236-4:2004. Steel cord conveyor belts. Vulcanized belt joints
BS EN ISO 9856:2003 BS EN ISO 9856:2003. Conveyor belts. Determination of elastic modulus
BS ISO 7919-5:2005 BS ISO 7919-5:2005. Mechanical vibration. Evaluation of machine vibration by measurements on rotating shafts. Machine sets in hydraulic power generating and pumping plants
BS EN 61338-4:2005 BS EN 61338-4:2005. Waveguide type dielectric resonators. Sectional specification
BS EN 60794-2-11:2005 BS EN 60794-2-11:2005. Optical fibre cables. Indoor cables. Detailed specification for simplex and duplex cables for use in premises cabling
03/117945 DC 03/117945 DC. IEC CISPR 22. AMD 2. F15. ED.4. Information Technology Equipment. Radio disturbance characteristics. Limits and methods of measurement
BS EN 61338-4-1:2005 BS EN 61338-4-1:2005. Waveguide type dielectric resonators. Blank detail specification
DD ISO/TS 3632-1:2003 DD ISO/TS 3632-1:2003. Saffron (Crocus sativus L.). Specification
BS EN 61605:2005 BS EN 61605:2005. Fixed inductors for use in electronic and telecommunication equipment. Marking codes
BS EN 60794-2-21:2006 BS EN 60794-2-21:2006. Optical fibre cables. Indoor cables. Detailed specification for multi-fibre optical distribution Cables for use in premises cabling
DD ISO/TS 3632-2:2003 DD ISO/TS 3632-2:2003. Saffron (Crocus sativus L.). Test methods
BS EN 60794-2-31:2006 BS EN 60794-2-31:2006. Optical fibre cables. Indoor cables. Detailed specification for optical fibre ribbon cables for use in premises cabling
BS EN 60794-3-12:2006 BS EN 60794-3-12:2006. Optical fibre cables. Outdoor cables. Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling
BS EN 60794-3-21:2006 BS EN 60794-3-21:2006. Optical fibre cables. Outdoor cables. Detailed specification for optical self-supporting aerial telecommunication cables for use in premises cabling
CWA 14855:2003 CWA 14855:2003. Dublin Core application profile guidelines
CWA 14856:2003 CWA 14856:2003. Guidance material for mapping between Dublin Core and ISO in the geographic information domain
CWA 14857:2003 CWA 14857:2003. Mapping between Dublin Core and ISO 19115, "Geographic Information. Metadata"
CWA 14858:2003 CWA 14858:2003. Dublin Core spatial application profile
CWA 14859:2003 CWA 14859:2003. Guidance on the use of metadata in eGovernment
CWA 14860:2003 CWA 14860:2003. Dublin Core eGovernment application profiles
BS ISO 14508:2006 BS ISO 14508:2006. Road vehicles. Spark plugs. Terminals
BS EN 14797:2006 BS EN 14797:2006. Explosion venting devices
03/118895 DC 03/118895 DC. EN 12622. Safety of machine tools. Hydraulic press brakes
BS ISO 230-4:2005 BS ISO 230-4:2005. Test code for machine tools. Circular tests for numerically controlled machine tools
BS EN ISO 17189:2003 BS EN ISO 17189:2003. Butter, edible oil emulsions and spreadable fats. Determination of fat content (Reference method)
03/117951 DC 03/117951 DC. IEC 60730-2-16 ED.2. Automatic controls for household and similar use. Part 2-16. Particular requirements for automatic electrical water level operating controls of the floa
03/117957 DC 03/117957 DC. IEC 60730-2-15 ED.2. Automatic controls for household and similar use. Part 2-15. Particular requirements for automatic electrical water level sensing controls of the float
BS EN ISO 4628-10:2003, BS 3900-H10:2003 BS EN ISO 4628-10:2003, BS 3900-H10:2003. Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of inte
BS EN ISO 21670:2003 BS EN ISO 21670:2003. Hexagon weld nuts with flange
BS EN ISO 4628-7:2003, BS 3900-H7:2003 BS EN ISO 4628-7:2003, BS 3900-H7:2003. Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensit
BS ISO 6623:2004 BS ISO 6623:2004. Internal combustion engines. Piston rings. Scraper rings made of cast iron
BS EN ISO 10846-4:2003 BS EN ISO 10846-4:2003. Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements. Dynamic stiffness of elements other than res
BS EN ISO 15367-1:2003 BS EN ISO 15367-1:2003. Lasers and laser-related equipment. Test methods for determination of the shape of a laser beam wavefront. Terminology and fundamental aspects
BS ISO 4250-1:2006 BS ISO 4250-1:2006. Earth-mover tyres and rims. Tyre designation and dimensions
BS ISO 4250-2:2006 BS ISO 4250-2:2006. Earth-mover tyres and rims. Loads and inflation pressures
BS ISO 4250-3:2006 BS ISO 4250-3:2006. Earth-mover tyres and rims. Rims
DD ISO/PAS 17712:2003 DD ISO/PAS 17712:2003. Freight containers. Mechanical seals
BS EN 13911:2004 BS EN 13911:2004. Protective clothing for firefighters. Requirements and test methods for fire hoods for firefighters
DD CEN/TS 15082:2005 DD CEN/TS 15082:2005. Wood preservatives. Determination of the preventive effectiveness against sapstain fungi and mould fungi on freshly sawn timber. Field test
BS ISO 15817:2005 BS ISO 15817:2005. Earth-moving machinery. Safety requirements for remote operator control
BS EN 1198:2005 BS EN 1198:2005. Chemicals used for treatment of water intended for human consumption. Sodium dihydrogen orthophosphate
BS EN 1199:2005 BS EN 1199:2005. Chemicals used for treatment of water intended for human consumption. Disodium hydrogen orthophosphate
BS EN 1200:2005 BS EN 1200:2005. Chemicals used for treatment of water intended for human consumption. Trisodium orthophosphate
BS EN 1201:2005 BS EN 1201:2005. Chemicals used for treatment of water intended for human consumption. Potassium dihydrogen orthophosphate
BS EN 1202:2005 BS EN 1202:2005. Chemicals used for treatment of water intended for human consumption. Dipotassium hydrogen orthophosphate
BS EN 1203:2005 BS EN 1203:2005. Chemicals used for treatment of water intended for human consumption. Tripotassium orthophosphate
BS EN 1204:2005 BS EN 1204:2005. Chemicals used for treatment of water intended for human consumption. Calcium tetrahydrogen bis(orthophosphate)
BS EN 1205:2005 BS EN 1205:2005. Chemicals used for treatment of water intended for human consumption. Disodium dihydrogen pyrophosphate
BS EN 1206:2005 BS EN 1206:2005. Chemicals used for treatment of water intended for human consumption. Tetrasodium pyrophosphate
BS EN 12904:2005 BS EN 12904:2005. Products used for treatment of water intended for human consumption. Silica sand and silica gravel
BS EN 1207:2005 BS EN 1207:2005. Chemicals used for treatment of water intended for human consumption. Tetrapotassium pyrophosphate
BS EN 1208:2005 BS EN 1208:2005. Chemicals used for treatment of water intended for human consumption. Sodium calcium polyphosphate
BS EN 1210:2005 BS EN 1210:2005. Chemicals used for treatment of water intended for human consumption. Sodium tripolyphosphate
BS EN 1211:2005 BS EN 1211:2005. Chemicals used for treatment of water intended for human consumption. Potassium tripolyphosphate
BS EN 1212:2005 BS EN 1212:2005. Chemicals used for treatment of water intended for human consumption. Sodium polyphosphate
BS EN ISO 4628-3:2003, BS 3900-H3:2003 BS EN ISO 4628-3:2003, BS 3900-H3:2003. Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensit
BS EN ISO 4628-2:2003, BS 3900-H2:2003 BS EN ISO 4628-2:2003, BS 3900-H2:2003. Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensit
BS EN ISO 4628-4:2003, BS 3900-H4:2003 BS EN ISO 4628-4:2003, BS 3900-H4:2003. Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensit
BS EN ISO 4628-5:2003, BS 3900-H5:2003 BS EN ISO 4628-5:2003, BS 3900-H5:2003. Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensit
BS EN ISO 4628-1:2003, BS 3900-H1:2003 BS EN ISO 4628-1:2003, BS 3900-H1:2003. Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensit
BS EN 14817:2006 BS EN 14817:2006. Railway applications. Suspension components. Air-spring control elements
PD CEN/TS 15003:2005 PD CEN/TS 15003:2005. Durability of wood and wood-based products. Criteria for hot air processes for curative uses against wood destroying organisms
BS 5502-23:2004 BS 5502-23:2004. Buildings and structures for agriculture. Fire precautions. Code of practice
BS EN 60730-2-9:2002 BS EN 60730-2-9:2002. Automatic electrical controls for household and similar use. Particular requirements for temperature sensing controls
BS EN 46-2:2006 BS EN 46-2:2006. Wood preservatives. Determination of the preventive action against Hylotrupes bajalus (Linnaeus). Ovicidal effect (laboratory method)
PD IEC/TR 62390:2005 PD IEC/TR 62390:2005. Common automation device. Profile guideline
BS ISO 8992:2005 BS ISO 8992:2005. Fasteners. General requirements for bolts, screws, studs and nuts
BS ISO 6622-1:2003 BS ISO 6622-1:2003. Internal combustion engines. Piston rings. Rectangular rings made of cast iron
BS ISO 8535-2:2003 BS ISO 8535-2:2003. Compression ignition engines. Steel tubes for high pressure fuel injection pipes. Requirements for composite tubes
BS ISO 3783:2006 BS ISO 3783:2006. Paper and board. Determination of resistance to picking. Accelerated speed method using the IGT-type tester (electric model)
BS ISO 8600-1:2005 BS ISO 8600-1:2005. Optics and photonics. Medical endoscopes and endotherapy devices. General requirements
BS ISO 8036:2006 BS ISO 8036:2006. Optics and photonics. Microscopes. Immersion liquids for light microscopy
BS EN 61000-4-34:2007 BS EN 61000-4-34:2007. Electromagnetic compatability (EMC). Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests for equipm
BS ISO 8784-1:2005 BS ISO 8784-1:2005. Pulp, paper and board. Microbiological examination. Total count of bacteria, yeast and mould based on disintegration
BS ISO 6561-2:2005 BS ISO 6561-2:2005. Fruits, vegetables and derived products. Determination of cadmium content. Method using flame atomic absorption spectrometry
BS EN 12814-8:2001 BS EN 12814-8:2001. Testing of welded joints of thermoplastic semi-finished products -. Requirements
03/117977 DC 03/117977 DC. IEC CISPR 22 AMD 2. Information technology equipment. Radio disturbance characteristics. Limits and methods of measurement. Changes to non-invasive telecommunication port co
CWA 14838-1:2003 CWA 14838-1:2003. Facilitating smart card technology for electronic ticketing and seamless travel. EU policy and user requirements
CWA 14838-2:2003 CWA 14838-2:2003. Facilitating smart card technology for electronic ticketing and seamless travel. Development of smart card based interoperable ticketing systems
CWA 14838-3:2003 CWA 14838-3:2003. Facilitating smart card technology for electronic ticketing and seamless travel. Catalogue of technical and business process requirements
BS EN ISO 24013:2006 BS EN ISO 24013:2006. Optics and photonics. Lasers and laser-related equipment. Measurement of phase retardation of optical components for polarized laser radiation
BS EN 13396:2004 BS EN 13396:2004. Products and systems for the protection and repair of concrete structures. Test methods. Measurement of chloride ion ingress
BS EN 13295:2004 BS EN 13295:2004. Products and systems for the protection and repair of concrete structures.Test methods. Determination of resistance to carbonation
BS EN ISO 105-X16:2002 BS EN ISO 105-X16:2002. Textiles. Tests for colour fastness. Colour fastness to rubbing. Small areas
BS EN 60311:2003 BS EN 60311:2003. Electric irons for household or similar use. Methods for measuring performance
WD/BSEN13445-3 : 2002 WD/BSEN13445-3 : 2002. Unfired pressure vessels. Design
BS 7582:2005 BS 7582:2005. Code of practice for reconditioning of used safes
BS EN ISO 6940:2004 BS EN ISO 6940:2004. Textile fabrics. Burning behaviour. Determination of ease of ignition of vertically oriented specimens
BS EN ISO 6941:2003 BS EN ISO 6941:2003. Textile fabrics. Burning behaviour. Measurement of flame spread properties of vertically oriented specimens
BS EN 1948-1:2006 BS EN 1948-1:2006. Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs. Sampling of PCDDs/PCDFs
BS EN 1948-2:2006 BS EN 1948-2:2006. Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs. Extraction and clean-up of PCDDs/PCDFs
BS EN 1948-3:2006 BS EN 1948-3:2006. Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs. Identification and quantification of PCDDs/PCDFs
BS 6000-1:2005 BS 6000-1:2005. Guide to the selection and usage of acceptance sampling systems for inspection of discrete items in lots. General guide to acceptance sampling
BS 6000-2:2005 BS 6000-2:2005. Guide to the selection and usage of acceptance sampling systems for inspection of discrete items in lots. Guide to sampling by attributes
BS 6000-3:2005 BS 6000-3:2005. Guide to the selection and usage of acceptance sampling systems for inspection of discrete items in lots. Guide to sampling by variables
BS EN 12878:2005 BS EN 12878:2005. Pigments for the colouring of building materials based on cement and/or lime. Specifications and methods of test
BS EN 13900-5:2005 BS EN 13900-5:2005. Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics. Determination by filter pressure value test
BS EN 14787:2005 BS EN 14787:2005. Fertilizers and liming materials. Determination of water content. Guidelines and recommendations
BS EN ISO 5267-1:2001 BS EN ISO 5267-1:2001. Pulps. Determination of drainability. Schopper-Riegler method
BS EN ISO 10256:2003 BS EN ISO 10256:2003. Head and face protection for use in ice hockey
BS EN 13509:2003 BS EN 13509:2003. Cathodic protection measurement techniques
BS EN ISO 14323:2006 BS EN ISO 14323:2006. Resistance spot welding and projection welds. Destructive testing of welds. Specimen dimensions and procedure for impact shear test and cross-tension testing
BS EN 50152-3-1:2003 BS EN 50152-3-1:2003. Railway applications. Fixed installations. Particular requirements for a.c. switchgear. Measurement, control and protection devices for specific use in a.c.
BS EN ISO 11161:2007 BS EN ISO 11161:2007. Safety of machinery. Integrated manufacturing systems. Basic requirements
BS EN 14227-11:2006 BS EN 14227-11:2006. Unbound and hydraulically bound mixtures. Specifications. Soil treated by lime
BS EN 60749-30:2005 BS EN 60749-30:2005. Semiconductor devices. Mechanical and climatic test methods. Preconditioning of non-hermetic surface mount devices prior to reliability testing
BS 8442:2006 BS 8442:2006. Miscellaneous road traffic signs and devices. Requirements and test methods
03/119348 DC 03/119348 DC. prEN 1013-1. Light transmitting single skin profiled plastics sheeting for internal and external roofing, wall cladding and ceiling finishes. Part 1: General requirements an
BS EN 13501-2:2003 BS EN 13501-2:2003. Fire classification of construction products and building elements. Classification using data from fire resistance tests, excluding ventilation services
BS EN 14227-12:2006 BS EN 14227-12:2006. Hydraulically bound mixtures. Specifications. . Soil treated by slag
BS ISO/IEC 11770-4:2006 BS ISO/IEC 11770-4:2006. Information technology. Security techniques. Key management. Mechanisms based on weak secrets
06/30105375 DC 06/30105375 DC. BS EN ISO 3691-2. Industrial trucks. Safety requirements and verification. Part 2. Self-propelled variable-reach trucks
BS IEC 61182-2:2006 BS IEC 61182-2:2006. Printed board assembly products. Manufacturing description data and transfer methodology. Generic requirements
BS EN 61000-3-2:2006 BS EN 61000-3-2:2006. Electromagnetic compatibility (EMC). Limits. Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)
BS ISO 6621-4:2003 BS ISO 6621-4:2003. Internal combustion engines. Piston rings. General specifications
BS EN 14227-13:2006 BS EN 14227-13:2006. Hydraulically bound mixtures. Specifications. Soil treated by hydraulic road binder
BS EN 14227-14:2006 BS EN 14227-14:2006. Hydraulically bound mixtures. Specifications. Soil treated by fly ash
BS EN 10083-1:2006 BS EN 10083-1:2006. Steels for quenching and tempering. General technical delivery conditions
BS EN 10083-2:2006 BS EN 10083-2:2006. Steels for quenching and tempering. Technical delivery conditions for non alloy steels
BS EN 14843:2007 BS EN 14843:2007. Precast concrete products. Stairs
BS EN 14844:2006 BS EN 14844:2006. Precast concrete products. Box culverts
BS EN 14806:2005 BS EN 14806:2005. Packaging. Preliminary evaluation of the disintegration of packaging materials under simulated composting conditions in a laboratory scale test
BS ISO/IEC 14496-14:2003 BS ISO/IEC 14496-14:2003. Information technology. Coding of audio-visual objects. MP4 file format
BIP 0012:2007 BIP 0012:2007. Data Protection Update Guide
BS ISO 15469:2004 BS ISO 15469:2004. Spatial distribution of daylight. CIE standard general sky
ISO/PAS17684 : 2003 EDTN 1 ISO/PAS17684 : 2003 EDTN 1. ISO/PAS17684 : 2003 Transport information and control systems . In-vehicle navigation systems . ITS Message set translator to ASN.1 format defini
BS EN 60794-4-10:2007 BS EN 60794-4-10:2007. Optical fibre cables. Aerial optical cables along electrical power lines. Family specification for OPGW (optical ground wires)
DD CEN/TS 14271:2003 DD CEN/TS 14271:2003. Health informatics. File exchange format for vital signs
03/316661 DC 03/316661 DC. ISO/IEC 16512-1. Information technology. RMCP Framework
ISO/IEC16512-1 : 2005 EDTN1 ISO/IEC16512-1 : 2005 EDTN1. ISO/IEC16512-1 : 2005 Information technology - Relayed Multicast Control Protocol (RMCP) -. Part 1: Framework
03/316662 DC 03/316662 DC. ISO/IEC 16513. Information technology. Group Management Protocol
ISO/IEC16513 : 2005 EDTN 1 ISO/IEC16513 : 2005 EDTN 1. ISO/IEC16513 : 2005 Information technology - Group Management Protocol
BS ISO 17584:2005 BS ISO 17584:2005. Refrigerant properties
BS ISO 1793:2005 BS ISO 1793:2005. Cinematography. Reels for 16 mm motion-picture projectors (up to and including 610 m capacity: 38 cm size). Dimensions
BS EN 54-21:2006 BS EN 54-21:2006. Fire detection and fire alarm systems. Alarm transmission and fault warning routing equipment
BS EN ISO 11446:2004 BS EN ISO 11446:2004. Road vehicles. Connectors for the electrical connection of towing and towed vehicles. 13-pole connectors for vehicles with 12 V nominal supply voltage
03/119280 DC 03/119280 DC. IEC 60730-2-14. AMD 2. Automatic controls for household and similar use. Part 2-14. Particular requirements for electric acutators
BS EN 61076-2-101:2003+A1:2006 BS EN 61076-2-101:2003+A1:2006. Connectors for electronic equipment. Circular connectors. Detail specification for circular connectors M8 with screw- or snap-locking, M1
BS EN 60728-7-1:2005 BS EN 60728-7-1:2005. Cable networks for television signals, sound signals and interactive services. Hybrid fibre coax outside plant status monitoring. Physical (PHY) layer specif
BS EN 60728-7-2:2005 BS EN 60728-7-2:2005. Cable networks for television signals, sound signals and interactive services. Hybrid fibre coax outside plant status monitoring. Media access control (MAC)
BS EN 61970-1:2006 BS EN 61970-1:2006. Energy management system application program interface (EMS-API). Guidelines and general requirements
BS EN 60728-7-3:2005 BS EN 60728-7-3:2005. Cable networks for television signals, sound signals and interactive services. Hybrid fibre coax outside plant status monitoring. Power supply to transponder
05/30105681 DC 05/30105681 DC. EN 14015:2004/prA1. Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage o
BS EN 60870-6-802:2002 BS EN 60870-6-802:2002. Telecontrol equipment and systems. Telecontrol protocols compatible with ISO standards and ITU-T recommendations. TASE.2 Object models
BS EN 140401-801:2002 BS EN 140401-801:2002. Detail specification. Fixed low power non wire-wound surface mount (SMD) resistors. Rectangular. Stability classes 0,1; 0,25; 0,5; 1
BS EN 607:2004 BS EN 607:2004. Eaves gutters and fittings made of PVC-U. Definitions, requirements and testing
BS EN ISO 15831:2004 BS EN ISO 15831:2004. Clothing. Physiological effects. Measurement of thermal insulation by means of a thermal manikin
BS EN ISO 17707:2005 BS EN ISO 17707:2005. Footwear. Test methods for outsoles. Flex resistance
ISO/IEC14776-115 : 2004 EDTN1 ISO/IEC14776-115 : 2004 EDTN1. ISO/IEC14776-115 : 2004 Information technology - Small Computer System Interface (SCSI) - . Part 115: Parallel Interface-5 (SPI-5)
BS EN 1366-3:2004 BS EN 1366-3:2004. Fire resistance tests for service installations. Penetration seals
BS EN 1366-7:2004 BS EN 1366-7:2004. Fire resistance tests for service installations. Conveyor systems and their closures
03/320797 DC 03/320797 DC. IEC 62109-1 ED.1. Safety of Power Converters for use in Photovoltaic Power Systems. Part 1. General requirements
BS EN 60335-2-84:2003 BS EN 60335-2-84:2003. Specification for safety of household and similar electrical appliances. Particular requirements for toilets
BS ISO 17087:2006 BS ISO 17087:2006. Specifications for adhesives used for finger joints in non-structural lumber products
BS EN ISO 14122-4:2004 BS EN ISO 14122-4:2004. Safety of machinery. Permanent means of access to machinery. Fixed ladders
BS ISO 3918:2007 BS ISO 3918:2007. Milking machine installations. Vocabulary
BS ISO 5707:2007 BS ISO 5707:2007. Milking machine installations. Construction and performance
BS ISO 6690:2007 BS ISO 6690:2007. Milking machine installations. Mechanical tests
BS ISO 20966:2007 BS ISO 20966:2007. Automatic milking installations. Requirements and testing
BS EN 1839:2003 BS EN 1839:2003. Determination of explosion limits of gases and vapours
BS EN 12391-1:2003 BS EN 12391-1:2003. Chimneys. Execution standard for metal chimneys. Chimneys for non-roomsealed heating appliances
BS ISO/IEC 15444-6:2003 BS ISO/IEC 15444-6:2003. Information technology. JPEG 2000 image coding system. Compound image file format
BS EN 60730-2-8:2002 BS EN 60730-2-8:2002. Specification for automatic electrical controls for household and similar use. Particular requirements. Particular requirements for electrically operated wat
DD IEC/PAS 61162-102:2003 DD IEC/PAS 61162-102:2003. Maritime navigation and radiocommunication equipment and systems. Digital interfaces. Single talker and multiple listeners. Extra requirements to I
BS EN 60534-8-1:2005 BS EN 60534-8-1:2005. Industrial-process control valves. Noise considerations. Laboratory measurement of noise generated by aerodynamic flow through control valves
BS EN 13216-1:2004 BS EN 13216-1:2004. Chimneys. Test methods for system chimneys. General test methods
BS EN 13126-1:2006 BS EN 13126-1:2006. Building hardware. Requirements and test methods for windows and doors height windows. Requirements common to all types of hardware
BS EN 13126-8:2006 BS EN 13126-8:2006. Building hardware. Requirements and test methods for windows and doors height windows. Tilt & turn, tilt-first and turn-only hardware
BS EN 13183-2:2002 BS EN 13183-2:2002. Moisture content of a piece of sawn timber. Estimation by electrical resistance method
BS EN 13183-1:2002 BS EN 13183-1:2002. Moisture content of a piece of sawn timber. Determination by oven dry method
BS ISO 14624-4:2003 BS ISO 14624-4:2003. Space systems. Safety and compatibility of materials. Determination of upward flammability of materials in pressurized gaseous oxygen or oxygen-enriched enviro
BS ISO 14624-2:2003 BS ISO 14624-2:2003. Space systems. Safety and compatibility of materials. Determination of flammability of electrical-wire insulation and accessory materials
BS ISO 14623:2003 BS ISO 14623:2003. Space systems. Pressure vessels and pressurized structures. Design and operation
BS 7373-3:2005 BS 7373-3:2005. Product specifications. Guide to identifying criteria for specifying a service offering
BS EN 14487-2:2006 BS EN 14487-2:2006. Sprayed concrete. Execution
PD 3005:2002 PD 3005:2002. Guide on the selection of BS 7799-2 controls
BS EN 55016-1-3:2004 BS EN 55016-1-3:2004. Specification for radio disturbance and immunity measuring apparatus and methods. Radio disturbance and immunity measuring apparatus. Ancillary equipment. Di
PAS 60-3:2004 PAS 60-3:2004. Equipment used in the controlled removal of asbestos-containing materials. Operation, cleaning and maintenance of class H vacuum cleaners. Code of practice
BS ISO 7121:2006 BS ISO 7121:2006. Steel ball valves for general-purpose industrial applications
ISO/TS10303-35 : 2003 EDTN 1 ISO/TS10303-35 : 2003 EDTN 1. ISO10303-35 : 2003 Industrial automation systems and Integration - Product data representation and exchange - . Part 35 : Conformance testing
BS EN ISO 10993-10:2002 BS EN ISO 10993-10:2002. Biological evaluation of medical devices. Tests for irritation and delayed-type hypersensitivity
06/30106212 DC 06/30106212 DC. EN 60601-2-52. Medical electrical equipment. Part 2-52. Particular requirements for the safety and essential performance of medical beds
BS EN 12331:2003 BS EN 12331:2003. Food processing machinery. Mincing machines. Safety and hygiene requirements
BS ISO 21214:2006 BS ISO 21214:2006. Intelligent transport systems. Continuous air interface, long and medium range (CALM). Infra-red systems
BS ISO/IEC 15938-6:2003 BS ISO/IEC 15938-6:2003. Information technology. Multimedia content description interface. Reference software
BS ISO/IEC 15938-7:2003 BS ISO/IEC 15938-7:2003. Information technology. Multimedia content description interface. Conformance testing
ISO/IEC10021-2 : 2003 EDTN 3 ISO/IEC10021-2 : 2003 EDTN 3. ISO/IEC10021-2 : 2003 Information technology -- Message Handling Systems (MHS): Overall architecture
BS EN 55016-1-5:2004 BS EN 55016-1-5:2004. Specification for radio disturbance and immunity measuring apparatus and methods. Radio disturbance and immunity measuring apparatus. Antenna calibration tes
BS EN 55016-2-4:2004 BS EN 55016-2-4:2004. Specification for radio disturbance and immunity measuring apparatus and methods. Methods of measurement of disturbances and immunity. Immunity measurements
PD CISPR/TR 16-4-3:2003 PD CISPR/TR 16-4-3:2003. Specification for radio disturbance and immunity measuring apparatus and methods. Uncertainties, statistics and limit modelling. Statistical considerat
PD CISPR/TR 16-4-4:2003 PD CISPR/TR 16-4-4:2003. Specification for radio disturbance and immunity measuring apparatus and methods. Uncertainties, statistics and limit modelling. Statistics of complain
ERROR ERROR.
BS EN 60335-2-90:2002 BS EN 60335-2-90:2002. Specification for safety of household and similar electrical appliances. Particular requirements for commercial microwave ovens
BS EN 13271:2002 BS EN 13271:2002. Timber fasteners. Characteristic load-carrying capacities and slip-moduli for connector joints
BS EN 10202:2001 BS EN 10202:2001. Cold reduced tinmill products. Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel
BS EN ISO 14505-3:2006 BS EN ISO 14505-3:2006. Ergonomics of the thermal environment. Evaluation of thermal environments in vehicles. Evaluation of thermal comfort using human subjects
BS EN ISO 8980-4:2006 BS EN ISO 8980-4:2006. Ophthalmic optics. Uncut finished spectacle lenses. Specifications and test methods for anti-reflective coatings
BS EN ISO 10322-1:2006 BS EN ISO 10322-1:2006. Ophthalmic optics. Semi-finished spectacle lens blanks. Specifications for single-vision and multifocal lens blanks
BS ISO 16156:2004 BS ISO 16156:2004. Machine-tools safety. Safety requirements for the design and construction of work holding chucks
BS EN ISO 10322-2:2006 BS EN ISO 10322-2:2006. Ophthalmic optics. Semi-finished spectacle lens blanks. Specifications for progressive power lens blanks
BS EN 14067-5:2006 BS EN 14067-5:2006. Railway applications. Aerodynamics. Requirements and test procedures for aerodynamics in tunnels
DD CLC/TS 61482-1:2003 DD CLC/TS 61482-1:2003. Live working. Flame-resistant materials for clothing for thermal protection of workers. Thermal hazards of an electric arc. Test methods
BS EN 60684-3-248:2007 BS EN 60684-3-248:2007. Flexible insulating sleeving. Specifications for individual types of sleeving. General purpose, heat-shrinkable, dual wall polyolefin sleeving, flame ret
03/119299 DC 03/119299 DC. IEC 60598-2-3. AMD 1. ED 3. Luminaires. Particular requirements. Luminaires for road and street lighting
03/119301 DC 03/119301 DC. IEC 60598-2-5. AMD 1. Luminaires. Particular requirements. Floodlights
BS ISO 20203:2005 BS ISO 20203:2005. Carbonaceous materials used in the production of aluminium. Calcined coke. Determination of crystallite size of calcined petroleum coke by X-ray diffraction
BS ISO 15389:2001 BS ISO 15389:2001. Space systems. Flight-to-ground umbilicals
BS ISO 22647:2006 BS ISO 22647:2006. Space data and information transfer systems. Space link identifiers
BS EN 61241-11:2006 BS EN 61241-11:2006. Electrical apparatus for use in the presence of combustible dust. Protection by intrinsic safety "iD"
05/30106456 DC 05/30106456 DC. IEC 62282-6. Fuel cell technologies. Part 6-1. Micro fuel cell power systems. Safety
03/313452 DC 03/313452 DC. ISO/IEC 15897. Procedure for the registration of cultural elements
PD ISO/IEC TR 18037:2004 PD ISO/IEC TR 18037:2004. Programming languages. C. Extensions to support embedded processors
BS ISO/IEC 14515-2:2003 BS ISO/IEC 14515-2:2003. Information technology. Portable operating system interface (POSIX). Test methods for measuring conformance to POSIX. Shell and utilities
04/30106493 DC 04/30106493 DC. ISO/IEC TR 19767. Information technology. Programming languages. Enhanced module facilities in Fortran
ISO/IECTR19767 : 2005 EDTN 1 ISO/IECTR19767 : 2005 EDTN 1. ISO/IECTR19767 : 2005 Information technology - Programming languages - Enhanced module facilities in Fortran
03/313453 DC 03/313453 DC. ISO/IEC TR 19769. Information technology. Programming languages. Specification for additional programming data types for the programming language C
ISO/IECTR19769 : 2004 EDTN 1 ISO/IECTR19769 : 2004 EDTN 1 . ISO/IECTR19769 : 2004 Information technology - Programming languages - Specification for additional programming data types for the programmi
KIT 133 KIT 133. Environmental management systems guidance kit
KIT 134 KIT 134. Guidance to understanding and implementing BS EN ISO 9000 kit
KIT 135 KIT 135. Records management & archiving standards & guidance kit
KIT 136 KIT 136. Information security standards & guidance kit
BS EN 61478:2001, IEC 61478:2001 BS EN 61478:2001, IEC 61478:2001. Live working. Ladders of insulating material
BS ISO 871:2006 BS ISO 871:2006. Plastics. Determination of ignition temperature using a hot-air furnace
BS EN ISO 8849:2003 BS EN ISO 8849:2003. Small craft. Electrically operated direct-current bilge-pumps
BS EN ISO 10993-3:2003 BS EN ISO 10993-3:2003. Biological evaluation of medical devices. Tests for genotoxicity, carcinogenicity and reproductive toxicity
BS EN ISO 15586:2003, BS 6068-2.84:2003 BS EN ISO 15586:2003, BS 6068-2.84:2003. Water quality. Determination of trace elements using atomic absorption spectrometry with graphite furnace
BS EN ISO 18265:2003 BS EN ISO 18265:2003. Metallic materials. Conversion of hardness values
BS EN 12312-6:2004 BS EN 12312-6:2004. Aircraft ground support equipment. Specific requirements. De-icers and de-icing/anti-icing equipment
BS EN 303-7:2006 BS EN 303-7:2006. Heating boilers. Gas-fired central heating boilers equipped with a forced draught burner of nominal heat output not exceeding 1000 kW
BS EN 14868:2005 BS EN 14868:2005. Protection of metallic materials against corrosion. Guidance on the assessment of corrosion likelihood in closed water circulation systems
BS EN 12697-1:2005 BS EN 12697-1:2005. Bituminous mixtures. Test methods for hot mix asphalt. Soluble binder content
BS ISO 7141:2005 BS ISO 7141:2005. Road vehicles. Light alloy wheels. Impact test
DD CLC/TS 61496-3:2003 DD CLC/TS 61496-3:2003. Safety of machinery. Electro-sensitive protective equipment. Particular requirements for active opto-electronic protective devices responsive to diffuse
BS ISO 3894:2005 BS ISO 3894:2005. Road vehicles. Wheels/rims for commercial vehicles. Test methods
BS ISO 14592-2:2002, BS 6068-5.31:2002 BS ISO 14592-2:2002, BS 6068-5.31:2002. Water quality. Evaluation of the aerobic biodegradability of organic compounds at low concentrations. Continuous flow riv
BS ISO 14592-1:2002, BS 6068-5.30:2002 BS ISO 14592-1:2002, BS 6068-5.30:2002. Water quality. Evaluation of the aerobic biodegradability of organic compounds at low concentrations. Shake-flask batch t
BS EN ISO 21178:2006 BS EN ISO 21178:2006. Light conveyor belts. Determination of electrical resistances
BS EN ISO 21179:2006 BS EN ISO 21179:2006. Light conveyor belts. Determination of the electrostatic field generated by a running light conveyor belt
BS EN ISO 21180:2006 BS EN ISO 21180:2006. Light conveyor belts. Determination of the maximum tensile strength
BS EN ISO 21181:2006 BS EN ISO 21181:2006. Light conveyor belts. Determination of the relaxed elastic modulus
BS EN ISO 21182:2006 BS EN ISO 21182:2006. Light conveyor belts. Determinationof the coefficient of friction
BS EN ISO 21183-1:2006 BS EN ISO 21183-1:2006. Light conveyor belts. Principal characteristics and applications
DD ISO/TS 22559-1:2004 DD ISO/TS 22559-1:2004. Safety requirements for lifts (elevators). Global safety requirements (GESR's) for lifts (elevators
PD CLC/TR 50424:2004 PD CLC/TR 50424:2004. Electric cables. List of residual recognised national types
BS EN 544:2005 BS EN 544:2005. Bitumen singles with mineral and/or synthetic reinforcements. Product secification and test methods
BS ISO/IEC 14496-18:2004 BS ISO/IEC 14496-18:2004. Information technology. Coding of audio-visual objects. Font compression and streaming
ISO20585 : 2005 EDTN1 ISO20585 : 2005 EDTN1. ISO20585 : 2005 Wood-based panels - Determination of wet bending strength after immersion in water at 70 ?C (boiling temperature)
PD CEN/TR 13833:2003 PD CEN/TR 13833:2003. Qualification of construction enterprises
ISO/IEC13251 : 2004 EDTN 1 ISO/IEC13251 : 2004 EDTN 1. ISO/IEC 13251 : 2004 Collection of graphical symbols for office equipment
BS EN 13268:2001 BS EN 13268:2001. Surface active agents. Determination of ethylene oxide and propylene oxide groups in ethylene oxide and propylene oxide adductspylene
BS EN 13270:2001 BS EN 13270:2001. Surface active agents. Determination of the active matter content in alkyldimethylbetaines
04/300295 DC 04/300295 DC. IEC 62145 ED.1. Crystalline silicon terrestrial photovoltaic (PV) modules. Blank detail specification
BS EN 61754-13:2006 BS EN 61754-13:2006. Fibre optic connector interfaces. Type FC-PC connector
BS EN ISO 13473-1:2004 BS EN ISO 13473-1:2004. Characterization of pavement texture by use of surface profiles. Determination of mean profile depth
ISO12858-3 : 2005 EDTN1 ISO12858-3 : 2005 EDTN1. ISO12858-3 : 2005 Optics and optical instruments - Ancillary devices for geodetic instruments -. Part 3: Tribrachs
BS EN 14874:2005 BS EN 14874:2005. Inland navigation vessels. Studless anchor chain. Cable lifter
ISO/IEC8802-11 : 2005 EDTN 2 ISO/IEC8802-11 : 2005 EDTN 2. ISO/IEC8802-11 : 2005 Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networ
PD CEN/TR 14862:2004 PD CEN/TR 14862:2004. Precast concrete products. Full-scale testing requirements in standards on precast concrete products
ISO/IEC14496-2 : 2004 EDTN 3 ISO/IEC14496-2 : 2004 EDTN 3. ISO/IEC 14496-2 : 2004 Information technology - Coding of audio-visual objects. Part 2 : Visual
BS ISO 12647-3:2005 BS ISO 12647-3:2005. Graphic technology. Process control for the production of half-tone colour separations, proofs and production prints. Coldset offset lithography on newsprint
BS ISO 15583:2005 BS ISO 15583:2005. Ships and marine technology. Maritime standards list
ISO19353 : 2005 EDTN1 ISO19353 : 2005 EDTN1. ISO19353 : 2005 Safety of machinery - Fire prevention and protection
BS EN ISO 6103:2005 BS EN ISO 6103:2005. Bonded abrasive products. Permissible unbalances of grinding wheels as delivered. Static testing
BS ISO/IEC 9496:2003 BS ISO/IEC 9496:2003. CHILL. The ITU-T programming language
BS EN ISO 3037:2007 BS EN ISO 3037:2007. Corrugated fibreboard. Determination of edgewise crush resistance (unwaxed edge method)
BS EN 10310:2003 BS EN 10310:2003. Steel tubes and fittings for onshore and offshore pipelines. Internal and external polyamide powder based coatings
BS ISO 10889-1:2004 BS ISO 10889-1:2004. Tool holders with cylindrical shank. Cylindrical shank, location bore. Technical delivery conditions
BS ISO 10889-2:2004 BS ISO 10889-2:2004. Tool holders with cylindrical shank. Type A, shanks for tool holders of special designs
BS ISO 10889-3:2004 BS ISO 10889-3:2004. Tool holders with cylindrical shank. Type B with rectangular radial seat
BS ISO 10889-4:2004 BS ISO 10889-4:2004. Tool holders with cylindrical shank. Type C with rectangular axial seat
BS ISO 10889-6:2004 BS ISO 10889-6:2004. Tool holders with cylindrical shank. Type E with cylindrical seat
BS ISO 10889-7:2004 BS ISO 10889-7:2004. Tool holders with cylindrical shank. Type F with taper seat
BS EN ISO 7493:2006 BS EN ISO 7493:2006. Dentistry. Operator's stool
BS 8452:2005 BS 8452:2005. Use of clamp-on (externally mounted) transit time metering techniques for liquid applications. Guide
BS ISO 6426-2:2002 BS ISO 6426-2:2002. Horological vocabulary. Technical and commercial definitions
BS ISO 18932:2005 BS ISO 18932:2005. Imaging materials. Adhesive mounting systems. Specifications
BS ISO 9650-1:2005 BS ISO 9650-1:2005. Small craft. Inflatable liferafts. Type I
BS ISO 9650-2:2005 BS ISO 9650-2:2005. Small craft. Inflatable liferafts. Type II
BS ISO 9650-3:2005 BS ISO 9650-3:2005. Small craft. Inflatable liferafts. Material
BS EN 13614:2004, BS 2000-521:2004 BS EN 13614:2004, BS 2000-521:2004. Methods of test for petroleum and its products. BS 2000-521: Bitumen and bituminous binders. Determination of adhesivity of bitum
BS EN 13588:2004, BS 2000-522:2004 BS EN 13588:2004, BS 2000-522:2004. Bitumen and bituminous binders. Determination of cohesion of bituminous binders with pendulum test
BS EN 61937-7:2005 BS EN 61937-7:2005. Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958. Non-linear PCM bitstreams according to the ATRAC, ATRAC2/3 and ATRAC-X f
BS EN 62365:2005 BS EN 62365:2005. Digital audio. Digital input-output interfacing. Transmission of digital audio over asynchronous transfer mode (ATM) networks
BS EN 13375:2004 BS EN 13375:2004. Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Specimen preparation
BS EN ISO 9073-6:2003 BS EN ISO 9073-6:2003. Textiles. Test methods for nonwovens. Absorption
BS ISO 18770:2005 BS ISO 18770:2005. Ships and marine technology. Machinery space flammable oil systems. Prevention of leakage of flammable oil
BS EN 60335-2-96:2002 BS EN 60335-2-96:2002. Household and similar electrical appliances. Safety. Particular requirements for flexible sheet heating elements for room heating
BS EN 61010-2-081:2002 BS EN 61010-2-081:2002. Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for automatic and semi-automatic labora
BS ISO 3089:2005 BS ISO 3089:2005. Machine tools. Test conditions for self-centring, manually-operated chucks with one-piece jaws
BS ISO 230-2:2006 BS ISO 230-2:2006. Test code for machine tools . Determination of accuracy and repeatability of positioning numerically controlled axes
BS 8466:2006 BS 8466:2006. Hats. Protection against solar UVR. Method of test and performance requirements
BS EN 843-3:2005 BS EN 843-3:2005. Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature. Determination of subcritical crack growth parameters from constant str
DD CEN/TS 14588:2004 DD CEN/TS 14588:2004. Solid biofuels. Terminology, definitions and descriptions
BS EN 14869-1:2004 BS EN 14869-1:2004. Structural adhesives. Determination of shear behaviour of structural bonds. Torsion test method using butt-bonded hollow cylinders
BS EN 14869-2:2004 BS EN 14869-2:2004. Structural adhesives. Determination of shear behaviour of structural bonds. Thick adherends shear test
DD IEC/PAS 61906:2005 DD IEC/PAS 61906:2005. Procedure for the declaration of materials in products of the electrotec hnical and electronics industry
PD IEC/TR 61908:2004 PD IEC/TR 61908:2004. The technology roadmap for industry data dictionary structure, utilization and implementation
ISO/TR22824 : 2003 EDTN 1 ISO/TR22824 : 2003 EDTN 1. ISO/TR22824 : 2003 Welding consumables - Predicted and measured FN in specifications - A position statement of the experts of IIW Commission IX
BS EN 60034-28:2007 BS EN 60034-28:2007. Rotating electrical machines. Test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors
BS ISO 1951:2007 BS ISO 1951:2007. Presentation/representation of entries in dictionaries. Requirements, recommendations and information
06/30107211 DC 06/30107211 DC. ISO/DIS 704. Terminology work. Principles and methods
BS ISO 639-3:2007 BS ISO 639-3:2007. Codes for the representation of names of languages. Alpha-3 code for comprehensive coverage of languages
BS EN ISO 9917-1:2003 BS EN ISO 9917-1:2003. Dental water-based cements. Powder/liquid acid-base cements
DD CEN ISO/TS 15874-7:2003 DD CEN ISO/TS 15874-7:2003. Plastics piping systems for hot and cold water installations. Polypropylene (PP). Guidance for the assessment of conformity
PD ISO/TR 22134:2007 PD ISO/TR 22134:2007. Practical guidelines for socioterminology
BS ISO 12615:2004 BS ISO 12615:2004. Bibliographic references and source identifiers for terminology work
BS EN 62208:2003 BS EN 62208:2003. Empty enclosures for low-voltage switchgear and controlgear assemblies. General requirements
BS EN 12697-40:2005 BS EN 12697-40:2005. Bituminous mixtures. Test methods for hot mix asphalt. In situ drainability
BS EN 848-3:2007 BS EN 848-3:2007. Safety of woodworking machines. One side moulding machines with rotating tools. Numerically controlled (NC) boring and routing machines
BS EN 14861:2004 BS EN 14861:2004. Forest machinery. Self propelled machinery. Safety requirements
ISO10303-240 : 2005 EDTN1 ISO10303-240 : 2005 EDTN1. ISO10303-240 : 2005 Industrial automation systems and integration - Product data representation and exchange -. Part 240: Application protocol: Pro
BS EN 848-2:2007 BS EN 848-2:2007. Safety of woodworking machines. One side moulding machines with rotating tool. Single spindle hand fed/integrated fed routing machines
ISO15531-32 : 2005 EDTN1 ISO15531-32 : 2005 EDTN1. ISO15531-32 : 2005 Industrial automation systems and integration - Manufacturing management data exchange. Conceptual information model for resources
ISO18629-11 : 2005 EDTN 1 ISO18629-11 : 2005 EDTN 1. ISO18629-11 : 2005 Industrial automation systems and integration. Process specification language -. Part 11: PSL core
ISO18629-12 : 2005 EDTN 1 ISO18629-12 : 2005 EDTN 1. ISO18629-12 : 2005 Industrial automation systems and integration. Process specification language. Part 12: Outer core
BS EN 848-1:2007 BS EN 848-1:2007. Safety of woodworking machines. One side moulding machines with rotating tool . Single spindle vertical moulding machines
BS EN ISO 19219:2003 BS EN ISO 19219:2003. Animal and vegetable fats and oils. Determination of visible foots in crude fats and oils
BS EN ISO 15680:2003, BS 6068-2.85:2003 BS EN ISO 15680:2003, BS 6068-2.85:2003. Water quality. Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and sever
BS EN 61966-6:2006 BS EN 61966-6:2006. Multimedia systems and equipment. Colour measurement and management. Front projection displays
04/30107372 DC 04/30107372 DC. BS EN 12183. Manual wheelchairs. Requirements and test methods
PD ISO/IEC TR 24718: 2005 PD ISO/IEC TR 24718: 2005. Information technology. Programming languages. Guide for the use of the Ada Ravenscar Profile in high integrity systems
PD ISO/IEC Guide 53:2005 PD ISO/IEC Guide 53:2005. Conformity assessment. Guidance on the use of an organization's quality management system in product certification
ISO/PAS17001 : 2005 EDTN 1 ISO/PAS17001 : 2005 EDTN 1. ISO/IEC17001 : 2005 Conformity assessment. Impartiality. Principles and requirements
ISO/PAS17002 : 2004 EDTN1 ISO/PAS17002 : 2004 EDTN1. ISO/PAS17002 : 2004 Conformity assessment - Confidentiality - Principles and requirements
ISO/PAS17003 : 2004 DETN1 ISO/PAS17003 : 2004 DETN1. ISO/PAS17003 : 2004 Conformity assessment - Complaints and appeals - Principles and requirements
BIP 0009-1:2004 BIP 0009-1:2004. Legal admissibility and evidential weight of information stored electronically. Compliance workbook
BS EN ISO 17993:2003, BS 6068-2.79:2002 BS EN ISO 17993:2003, BS 6068-2.79:2002. Water quality. Determination of 15 polycyclic aromatic hydrocarbons (PAH) in water by HPLC with fluorescence detection
BS EN 13763-5:2003 BS EN 13763-5:2003. Explosives for civil uses. Detonators and relays. Determination of resistance to cutting damage of leading wires and shock tubes
BS EN 14968:2006 BS EN 14968:2006. Semantics for groundwater data interchange
BS EN ISO 2360:2003 BS EN ISO 2360:2003. Non-conductive coatings on non-magnetic electrically conductive basis materials. Measurement of coating thickness. Amplitude-sensitive eddy current method
BS EN ISO 284:2003 BS EN ISO 284:2003. Conveyor belts. Electrical conductivity. Specification and test method
ISO10333-6 : 2004 EDTN1 ISO10333-6 : 2004 EDTN1. Personal fall-arrest systems -. Part 6: System performance tests
BS 667:2005 BS 667:2005. Illuminance meters. Requirements and test methods
BS 7920:2005 BS 7920:2005. Luminance meters. Requirements and test methods
BS EN ISO 24450:2005 BS EN ISO 24450:2005. Laboratory glassware. Wide-necked boiling flasks
CWA 14722-4:2004 CWA 14722-4:2004. Embedded financial transactional IC card reader (embedded FINREAD). Technical archtitecture and definition of APIs (application programming interface)
CWA 14722-3:2004 CWA 14722-3:2004. Embedded financial transactional IC card reader (embedded FINREAD). Functional and security specifications
CWA 14174-1:2004 CWA 14174-1:2004. Financial transactional IC card reader (FINREAD). Business requirements
CWA 14174-2:2004 CWA 14174-2:2004. Financial transactional IC card reader (FINREAD). Functional requirements
CWA 14174-3:2004 CWA 14174-3:2004. Financial transactional IC card reader (FINREAD). Security requirements
CWA 14174-4:2004 CWA 14174-4:2004. Financial transactional IC card reader (FINREAD). Architectural overview
CWA 14174-5:2004 CWA 14174-5:2004. Financial transactional IC card reader (FINREAD). Download file format
CWA 14174-6:2004 CWA 14174-6:2004. Financial transactional IC card reader (FINREAD). Definition of the virtual machine
CWA 14174-7:2004 CWA 14174-7:2004. Financial transactional IC card reader (FINREAD). Card reader application programming interfaces (API's)
CWA 14174-8:2004 CWA 14174-8:2004. Financial transactional IC card reader (FINREAD). Client application programming interfaces (API's)
BS 8414-2:2005 BS 8414-2:2005. Fire performance of external cladding systems. Test method for non-loadbearing external cladding systems fixed to and supported by a structural steel frame
BS EN ISO 16588:2003, BS 6068-2.82:2003 BS EN ISO 16588:2003, BS 6068-2.82:2003. Water quality. Determination of six complexing agents. Gas-chromatographic method
ISO21029-1 : 2004 EDTN1 ISO21029-1 : 2004 EDTN1. ISO21029-1 : 2004 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 volume - . Part 1: Design, fabrication, inspection a
ISO10303-224 : 2006 EDTN3 ISO10303-224 : 2006 EDTN3. ISO 10303-224 Industrial automation systems and integration - Product data representation and exchange -. Part 224: Application protocol: Mechanica
BS EN ISO 16408:2004 BS EN ISO 16408:2004. Dentistry. Oral hygiene products. Oral rinses
BS EN 573-1:2004 BS EN 573-1:2004. Aluminium and aluminium alloys. Chemical composition and form of wrought products. Numerical designation system
BS EN ISO 13628-6:2006 BS EN ISO 13628-6:2006. Petroleum and natural gas industries. Design and operation of subsea production systems. Subsea production control systems
BS EN 13200-3:2005 BS EN 13200-3:2005. Spectator facilities. Separating elements. Requirements
BS EN 60825-4:2006 BS EN 60825-4:2006. Safety of laser products. Laser guards
BS EN 50090-5-1:2005 BS EN 50090-5-1:2005. Home and building electronic systems (HBES). Media and media dependent layers. Power line for HBES Class 1
BS ISO 10059-2:2003 BS ISO 10059-2:2003. Dense shaped refractory materials. Determination of cold compressive strength. Test with packing
04/30107660 DC 04/30107660 DC. EN 4618. Aerospace series. Cabin air
BS EN ISO 10806:2003 BS EN ISO 10806:2003. Pipework. Fittings for corrugated metal hoses
BS EN 62403:2006 BS EN 62403:2006. High density recording format on CD-R/RW disc system. HD-BURN format
DD CEN/TS 14793:2005 DD CEN/TS 14793:2005. Stationary source emission. Intralaboratory validation procedure for an alternative method compared to a reference method
BS EN ISO 15136-2:2006 BS EN ISO 15136-2:2006. Petroleum and natural gas industries. Progressing cavity pump systems for artificial lift. Surface drive systems
BS ISO 16154:2005 BS ISO 16154:2005. Tractors and machinery for agriculture and forestry. Installation of lighting, light signalling and marking devices for travel on public roadways
BS ISO/IEC TR 13335-4:2000 BS ISO/IEC TR 13335-4:2000. Information technology. Guidelines for the management of IT security. Selection of safeguards
ISO13856-2 : 2005 EDTN1 ISO13856-2 : 2005 EDTN1. ISO13856-2 : 2005 Safety of machinery - Pressure-sensitive protective devices -. Part 2: General principles for the design and testing of pressure-sens
BS ISO/IEC 19785-1:2006 BS ISO/IEC 19785-1:2006. Information technology. Common biometric exchange formats framework. Data element specification
BS ISO/IEC 19794-1:2006 BS ISO/IEC 19794-1:2006. Information technology. Biometric data interchange formats. Framework
BS ISO/IEC 19794-2:2005 BS ISO/IEC 19794-2:2005. Information technology. Biometric data interchange formats. Finger minutiae data
BS ISO/IEC 19794-3:2006 BS ISO/IEC 19794-3:2006. Information technology. Biometric data interchange formats. Finger pattern spectral data
BS ISO/IEC 19794-4:2005 BS ISO/IEC 19794-4:2005. Information technology. Biometric data interchange formats. Finger image data
BS ISO/IEC 19794-6:2005 BS ISO/IEC 19794-6:2005. Information technology. Biometric data interchange formats. Iris image data
BS ISO/IEC 19795-2:2006 BS ISO/IEC 19795-2:2006. Information technology. Biometric performance testing and reporting. Testing methodologies for technology and scenario evaluation
BS ISO/IEC 24709-1:2007 BS ISO/IEC 24709-1:2007. Information technology. Conformance testing for the biometric application programming interface (BioAPI). Methods and procedures
BS EN ISO 15536-2:2007 BS EN ISO 15536-2:2007. Ergonomics. Computer manikins and body templates. Verification of functions and validation of dimensions for computer manikin systems
BS EN 14884:2005 BS EN 14884:2005. Air quality. Stationary source emissions. Determination of total mercury: automated measuring systems
ISO9972 : 2006 EDTN2 ISO9972 : 2006 EDTN2. ISO9972 : 2006 Thermal performance of buildings. Determination of air permeability of buildings. Fan pressurization method
BS ISO 2789:2006 BS ISO 2789:2006. Information and documentation. International library statistics
ISO17925 : 2004 EDTN1 ISO17925 : 2004 EDTN1. ISO17925 : 2004 Zinc and/or aluminium based coatings on steel - Determination of coating mass per unit area and chemical composition - Gravimetry,inductive
DD 243:2004 DD 243:2004. Installation and configuration of intruder alarm systems designed to generate confirmed alarm conditions. Code of practice
BS EN 12289:2005 BS EN 12289:2005. Advanced technical ceramics. Mechanical properties of ceramic composites at ambient temperature. Determination of in-plane shear properties
Institute of Petroleum Institute of Petroleum. Standard methods for analysis and testing of petroleum and related products, and British Standard 2000 Parts, 2006
BS EN 13291-3:2003 BS EN 13291-3:2003. Space products assurance. General requirements. Materials, mechanical parts and processes
BS EN 14880:2005 BS EN 14880:2005. Surface active agents. Determination of inorganic sulfate content in anionic surface active agents. Potentiometric lead selective electrode titration method
BS EN 14881:2005 BS EN 14881:2005. Surface active agents. Determination of N-(3-dimethylaminopropyl)-alkylamide content in alkylamidopropylbetaines. Gas chromatographic method
BS EN 13418:2004 BS EN 13418:2004. Rubber and plastics machines. Winding machines for film or sheet. Safety requirements
04/30108555 DC 04/30108555 DC. BS EN 14079. Non-active medical devices. Test methods for absorbent cotton gauzes and absorbent cotton and viscose gauzes used in the manufacturing of compresses and wou
04/30108568 DC 04/30108568 DC. ISO/IEC Guide 60. Code of good practice for conformity assessment
ISO/IEC GUIDE 60 : 2004 EDTN2 ISO/IEC GUIDE 60 : 2004 EDTN2. ISO/IEC GUIDE 60 : 2004 Conformity assessment - Code of good practice
ISO8686-4 : 2005 EDTN1 (R08) ISO8686-4 : 2005 EDTN1 (R08). ISO8686-4 : 2005 Cranes - Design principles for loads and load combinations -. Part 4: Jib cranes
BS EN ISO 16000-5:2007 BS EN ISO 16000-5:2007. Indoor air. Sampling strategy for volatile organic compounds (VOCs)
BS EN 61010-2-051:2003 BS EN 61010-2-051:2003. Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory equipment for mixing and
CWA 14911:2004 CWA 14911:2004. Cyber identity. Specification of a top level service (TLS) for verifying identifiers
ISO/ASTM51204 : 2004 EDTN2 ISO/ASTM51204 : 2004 EDTN2. ISO51204 : 2004 Practice for dosimetry in gamma irradiation facilities for food processing
ISO/ASTM51607 : 2004 EDTN2 ISO/ASTM51607 : 2004 EDTN2. ISO51607 : 2004 Practice for use of an alanine-EPR dosimetry system
ISO/ASTM51702 : 2004 EDTN2 ISO/ASTM51702 : 2004 EDTN2. ISO51702 : 2004 Practice for dosimetry in gamma irradiation facilities for radiation processing
DD CEN/TS 993-11:2003 DD CEN/TS 993-11:2003. Dense shaped refractory products. Determination of resistance to thermal shock
ISO/ASTM51939 : 2005 EDTN2 ISO/ASTM51939 : 2005 EDTN2. ISO/ASTM51939 : 2005 Practice for blood irradiation dosimetry
ISO/ASTM51940 : 2004 EDTN2 ISO/ASTM51940 : 2004 EDTN2. ISO/ASTM51940 : 2004 Guide for dosimetry for sterile insect release programs
BS EN 13745:2004 BS EN 13745:2004. Surfaces for sports areas. Determination of specular reflectance
BS EN 13185:2001 BS EN 13185:2001. Non-destructive testing. Leak testing. Tracer gas method
BS EN 13328-2:2002 BS EN 13328-2:2002. Breathing system filters for anaesthetic and respiratory use. Non-filtration aspects
BS EN 60318-5:2006 BS EN 60318-5:2006. Electroacoustics. Simulators of human head and ear. 2 cm3 coupler for the measurement of hearing aids and earphones coupled to the ear by means of ear inserts
ISO24370 : 2005 EDTN 1 ISO24370 : 2005 EDTN 1. ISO24370 : 2005 Fine ceramics -(advanced ceramics, advanced technical ceramics) Test method for fracture toughness of monolithic ceramics at room tempera
DD CLC/TS 50136-4:2004 DD CLC/TS 50136-4:2004. Alarm systems. Alarm transmission systems and equipment. Annunciation equipment used in alarm receiving centres
BS ISO/IEC 15408-1:2005 BS ISO/IEC 15408-1:2005. Information technology. Security techniques. Evaluation criteria for IT security. Introduction and general model
BS ISO/IEC 15408-2:2005 BS ISO/IEC 15408-2:2005. Information technology. Security techniques. Evaluation criteria for IT security. Security functional requirements
BS ISO/IEC 15408-3:2005 BS ISO/IEC 15408-3:2005. Information technology. Security techniques. Evaluation criteria for IT security. Security assurance requirements
BS EN ISO 6157-2:2004 BS EN ISO 6157-2:2004. Fasteners. Surface discontinuities. Nuts
BS EN ISO 10485:2004 BS EN ISO 10485:2004. Cone proof load test on nuts
BS EN ISO 13919-2:2001 BS EN ISO 13919-2:2001. Welding. Electron and laser beam welded joints. Guidance on quality levels for imperfections. Aluminium and its weldable alloys
BS 4422:2005 BS 4422:2005. Fire. Vocabulary
BS EN 50300:2004 BS EN 50300:2004. Low-voltage switchgear and controlgear assemblies. General requirements for low-voltage substation cable distribution boards
BS ISO 3009:2003 BS ISO 3009:2003. Fire resistance tests. Elements of building construction. Glazed elements
BS ISO 21948:2001 BS ISO 21948:2001. Coated abrasives. Plain sheets
BS ISO 6753-1:2005 BS ISO 6753-1:2005. Tools for pressing and moulding. Machined plates. Machined plates for press tools
BS ISO 10071-2:2005 BS ISO 10071-2:2005. Tools for pressing. Ball-lock punches. Ball-lock punches for heavy duty
BS EN ISO 9013:2002 BS EN ISO 9013:2002. Thermal cutting. Classification of thermal cuts. Geometrical product specification and quality tolerances
PD CEN ISO/TR 20172:2006 PD CEN ISO/TR 20172:2006. Welding. Grouping systems for materials. European materials
PD CEN ISO/TR 20173:2005 PD CEN ISO/TR 20173:2005. Welding. Grouping systems for materials. American materials
PD CEN ISO/TR 20174:2005 PD CEN ISO/TR 20174:2005. Welding. Grouping system for materials. Japanese materials
BS ISO 16770:2004 BS ISO 16770:2004. Plastics. Determination of environmental stress cracking (ESC) of polyethylene. Full-notch creep test (FNCT)
BS EN 61754-10:2005 BS EN 61754-10:2005. Fibre optic connector interfaces . Type Mini-MPO connector family
BS EN 61754-5:2005 BS EN 61754-5:2005. Fibre optic connector interfaces. Type MT connector family
BS 7870-3.40:2001 BS 7870-3.40:2001. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV. XLPE insula
BS 7870-3.10:2001 BS 7870-3.10:2001. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV. PVC insulat
BS 7870-3.21:2001 BS 7870-3.21:2001. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV. XLPE insula
BIP 2025:2003 BIP 2025:2003. Project planning and control. 4th edition
PD CLC/TR 50427:2004 PD CLC/TR 50427:2004. Assessment of inadvertent ignition of flammable atmospheres by radio-frequency radiation. Guide
KIT 130 KIT 130. Legal admissibility, records management and scanning, standards and guidance kit
KIT 131 KIT 131. Information security and legal admissibility standards & guidance kit
BS EN 274-1:2002 BS EN 274-1:2002. Waste fittings for sanitary appliances. Requirements
BS EN ISO 15609-2:2001 BS EN ISO 15609-2:2001. Specification and qualification of welding procedures for metallic materials. Welding procedure specification. Gas welding
BS EN ISO 9692-3:2001 BS EN ISO 9692-3:2001. Welding and allied processes. Joint preparation. Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys
BS EN 583-4:2002 BS EN 583-4:2002. Non-destructive testing. Ultrasonic examination. Examination for discontinuities perpendicular to the surface
BS EN 50065-4-6:2004 BS EN 50065-4-6:2004. Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz. Low voltage decoupling filters. Phase coulper
04/30108943 DC 04/30108943 DC. IEC 61057 ED 2.0. Live working. Aerial devices (MEWPs) with insulating boom
BS EN ISO 14931:2004 BS EN ISO 14931:2004. Leather. Guide to the selection of leather for apparel (excluding furs)
BS ISO 3977-9:1999 BS ISO 3977-9:1999. Gas turbines. Procurement. Reliability, availability, maintainability and safety
BS IEC 61523-3:2004 BS IEC 61523-3:2004. Delay and power calculation standards. Standard delay formaty (SDF) for the electronic design process
BS IEC 61691-4:2004 BS IEC 61691-4:2004. Behavioural languages. Verilog hardware description language
BS IEC 61691-5:2004 BS IEC 61691-5:2004. Behavioural langages. VITALASIC (application specific integrated circuit) modeling specification
BS ISO 17567:2005 BS ISO 17567:2005. Agriculture and forestry tractors and implements. Hydraulic power beyond
BS EN 12875-1:2005 BS EN 12875-1:2005. Mechanical dishwashing resistance of utensils. Reference test method for domestic articles
BS EN ISO 5983-2:2005 BS EN ISO 5983-2:2005. Animal feeding stuffs. Determination of nitrogen content and calculation of crude protein content. Block digestion/steam distillation method
BS EN 14565:2004 BS EN 14565:2004. Resilient floor coverings. Floor coverings based upon synthetic thermoplastic polymers. Specification
BS EN 274-3:2002 BS EN 274-3:2002. Waste fittings for sanitary appliances. Quality control
BS EN ISO 9934-1:2001 BS EN ISO 9934-1:2001. Non-destructive testing. Magnetic particle testing. General principles
BS ISO 8553:2004 BS ISO 8553:2004. Milk. Enumeration of microorganisms. Plate-loop technique at 30°C
BS ISO 8552:2004 BS ISO 8552:2004. Milk. Estimation of psychrotrophic microorganisms. Colony-count technique at 21°C (rapid method)
BS EN 50423-2:2005 BS EN 50423-2:2005. Overhead electrical lines exceeding AC 1 kV up to and including AC 45 kV. Index of national normative aspects
BS ISO 3809:2004 BS ISO 3809:2004. Oil of lime (cold pressed), Mexican type [Citrus aurantifolia (Christm.) Swingle], obtained by mechanical means
BS EN 13437:2003 BS EN 13437:2003. Packaging and material recycling. Criteria for recycling methods. Description of recycling processes and flow chart
BS ISO 4718:2004 BS ISO 4718:2004. Oil of lemongrass [Cymbopogon flexuosus (Nees ex Steudel) J.F. Watson]
BS 7870-3.20:2001 BS 7870-3.20:2001. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV. PVC insulat
BS 8428:2004 BS 8428:2004. Protective clothing. Protection against liquid chemicals. Performance requirements for chemical protective suits with liquid-tight connections between different parts of the
BS 7870-3.11:2001 BS 7870-3.11:2001. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV. XLPE insula
BS EN 13138-1:2003 BS EN 13138-1:2003. Buoyant aids for swimming instruction. Safety requirements and test methods for buoyant aids to be worn
BS EN 1996-2:2006 BS EN 1996-2:2006. Eurocode 6. Design of masonry structures. Design considerations, selection of materials and execution of masonry
BS EN 62014-1:2002 BS EN 62014-1:2002. Electronic design automation libraries. Input/Output buffer information specifications (IBIS version 3.2)
BS ISO 9276-5:2005 BS ISO 9276-5:2005. Representation of results of particle size analysis. Methods of calculation relating to particle size analyses using logarithmic normal probability distribution
DD IEC TS 61968-2:2003 DD IEC TS 61968-2:2003. Application integration at electric utilities. System interfaces for distribution management. Glossary
BS EN 14879-1:2005 BS EN 14879-1:2005. 0rganic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media. Terminology, design and prepa
BS EN 13374:2004 BS EN 13374:2004. Temporary edge protection systems. Product specification, test methods
BS EN 14879-2:2006 BS EN 14879-2:2006. Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media. Coatings on metallic componen
ISO/IEC21118 : 2005 EDTN 1 ISO/IEC21118 : 2005 EDTN 1. ISO/IEC21118 : 2005 Information to be included in specification sheets. Data projector
BSISO/IEC15938-7 : 2003 (CD-ROM) BSISO/IEC15938-7 : 2003 (CD-ROM). BSISO/IEC15938-7 : 2003 Information technology - Multimedia content description interface. Part 7 : Conformance testing
BSISO/IEC15938-7 : 2003 (COVERS) BSISO/IEC15938-7 : 2003 (COVERS).
PD ISO/IEC TR 14143-3:2003 PD ISO/IEC TR 14143-3:2003. Information technology. Software measurement. Functional size measurement. Verification of functional size measurement methods
04/30109234 DC 04/30109234 DC. ISO 10567. Earth-moving machinery. Hydraulic excavators. Lift capacity
ISO23611-3 : 2007 EDTN1 ISO23611-3 : 2007 EDTN1. ISO 23611-3:2007 Soil quality - Sampling of soil invertebrates -. Part 3: Sampling and soil extraction of enchytraeids
04/30109267 DC 04/30109267 DC. EN ISO 13564-1. Powered industrial trucks. Test methods for verification of visibility. Part 1. Sit-on and stand-on operator trucks and variable reach trucks
BS ISO 6472:2004 BS ISO 6472:2004. Rubber compounding ingredients. Abbreviations
BS EN 12952-13:2003 BS EN 12952-13:2003. Water-tube boilers and auxiliary installations. Requirements for flue gas cleaning systems
BS ISO 24237:2005 BS ISO 24237:2005. Surface chemical analysis. X-ray photoelectron spectroscopy. Repeatability and constancy of intensity scale
BS ISO 24236:2005 BS ISO 24236:2005. Surface chemical analysis. Auger electron spectroscopy. Repeatability and constancy of intensity scale
DD ISO/TS 14415:2005 DD ISO/TS 14415:2005. Ergonomics of the thermal environment. Application of international standards to people with special requirements
BS ISO 15312:2003 BS ISO 15312:2003. Rolling bearings. Thermal speed rating. Calculation and coefficients
BS ISO 8535-1:2006 BS ISO 8535-1:2006. Diesel engines. Steel tubes for high-pressure fuel injection pipes. Requirements for seamless cold-drawn single-wall tubes
BS EN 14214:2003 BS EN 14214:2003. Automotive fuels. Fatty acid methylesters (FAME) for diesel engines. Requirements and test methods
BS ISO 12156-2:2007 BS ISO 12156-2:2007. Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR). Limit
BS EN ISO 8980-5:2005 BS EN ISO 8980-5:2005. Ophthalmic optics. Uncut finished spectacle lenses. Minimum requirements for spectacle lens surfaces claimed to be abrasion-resistant
BS ISO 6148:2001 BS ISO 6148:2001. Photography. Micrographic films, spools and cores. Dimensions
ISO20505 : 2005 EDTN 1 ISO20505 : 2005 EDTN 1. ISO20505 : 2005 Fine ceramics (advanced ceramics, advanced technical ceramics. Determination of the interlaminar shear strength of continuous fibre-reinf
BS EN 50388:2005 BS EN 50388:2005. Railway applications. Power supply and rolling stock. Technical criteria for the coordination between power supply (substation) and rolling stock to achieve interope
KIT 129 KIT 129.
ISO/ASTM51431 : 2005 EDTN2 ISO/ASTM51431 : 2005 EDTN2. ISO/ASTM51431 : 2005 Standard practice for dosimetry in electron beam and X-ray (Bremsstrahlung) irradiation facilities for food processing
ISO/ASTM51650 : 2005 EDTN2 ISO/ASTM51650 : 2005 EDTN2. ISO/ASTM51650 : 2005 Use of cellulose acetate dosimetry system
BS EN 274-2:2002 BS EN 274-2:2002. Waste fitting for sanitary appliances. Test methods
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
