BIS Standards Catalogue
BS ISO 2596:2006 BS ISO 2596:2006. Iron ores. Determination of hygroscopic moisture in analytical samples. Gravimetric, Karl Fischer and mass-loss methods
BS EN 14183:2003 BS EN 14183:2003. Step stools
BS 1139-6:2005 BS 1139-6:2005. Metal scaffolding. Specification for prefabricated tower scaffolds outside the scope of BS EN 1004, but utilizing components from such systems
BS EN ISO 643:2003 BS EN ISO 643:2003. Steels. Micrographic determination of the apparent grain size
BS EN 61300-3-3:2003 BS EN 61300-3-3:2003. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Active monitoring of change
BS EN 62099:2001, IEC 62099:2001 BS EN 62099:2001, IEC 62099:2001. Fibre optic wavelength switches. Generic specification
BS ISO 2240:2003 BS ISO 2240:2003. Photography. Colour reversal camera films. Determination of ISO speed
BS EN ISO 17664:2004 BS EN ISO 17664:2004. Sterilization of medical devices. Information to be provided by the manufacturer for the processing of resterilizable medical devices
BS ISO 9848:2003 BS ISO 9848:2003. Photography. Source document microfilms. Determination of ISO speed and ISO average gradient
BS EN ISO 1968:2004 BS EN ISO 1968:2004. Fibre ropes and cordage. Vocabulary
ISO17123-5 : 2005 EDTN1 ISO17123-5 : 2005 EDTN1. ISO17123-5 : 2005 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments. Part 5: Electronic tacheometers
ISO17123-6 : 2003 EDTN 1 ISO17123-6 : 2003 EDTN 1. ISO17123-6 : 2003 Optics and optical instruments- instruments- Field procedures for testing Geodetic and surveying Geodetic and surveying instruments
BS EN 60297-5-100:2001, IEC 60297-5-100:2001 BS EN 60297-5-100:2001, IEC 60297-5-100:2001. Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482.6 mm (19 in) s
BS EN 60297-5-101:2001, IEC 60297-5-101:2001 BS EN 60297-5-101:2001, IEC 60297-5-101:2001. Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482.6 mm (19 in) s
BS EN 60297-5-102:2001, IEC 60297-5-102:2001 BS EN 60297-5-102:2001, IEC 60297-5-102:2001. Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482.6 mm (19 in) s
BS EN 60297-5-103:2001, IEC 60297-5-103:2001 BS EN 60297-5-103:2001, IEC 60297-5-103:2001. Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482.6 mm (19 in) s
BS EN 60297-5-104:2001, IEC 60297-5-104:2001 BS EN 60297-5-104:2001, IEC 60297-5-104:2001. Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482.6 mm (19 in) s
BS EN 60297-5-105:2001, IEC 60297-5-105:2001 BS EN 60297-5-105:2001, IEC 60297-5-105:2001. Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482.6 mm (19 in) s
BS EN 60297-5-107:2001, IEC 60297-5-107:2001 BS EN 60297-5-107:2001, IEC 60297-5-107:2001. Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482.6 mm (19 in) s
BS ISO 10099:2001 BS ISO 10099:2001. Pneumatic fluid power. Cylinders. Final examination and acceptance criteria
BS EN 13392:2001 BS EN 13392:2001. Textiles. Monofilaments. Determination of linear density
ISO/TS20625 : 2002 EDTN.1 ISO/TS20625 : 2002 EDTN.1. ISO/TS20625 : 2002 Electronic data interchange for administration, commerce and transport (EDIFACT) - Rules for generation of XML scheme files (XSD
BS EN ISO 19901-5:2003 BS EN ISO 19901-5:2003. Petroleum and natural gas industries. Specific requirements for offshore structures. Weight control during engineering and construction
BS 7012-16:2001, ISO 10937:2000 BS 7012-16:2001, ISO 10937:2000. Light microscopes. Diameter of interchangeable eyepieces
BS ISO 10414-1:2001 BS ISO 10414-1:2001. Petroleum and natural gas industries. Field testing of drilling fluids. Water-based fluids
BS ISO 14856:2001 BS ISO 14856:2001. Timekeeping instruments. Wristwatch cases. Fixing dimensions of non-spring-bar types
BS EN 61010-2-032:2002 BS EN 61010-2-032:2002. Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for hand-held and hand-manipulated curr
BS EN 14086:2003 BS EN 14086:2003. Paper and board. Measurement of specular gloss. 45° gloss with a parallel beam, DIN method
DISC PD 1999-1:2001 DISC PD 1999-1:2001. Guidance on readiness for euro business
BS ISO 1268-2:2001 BS ISO 1268-2:2001. Fibre-reinforced plastics. Methods of producing test plates. Contact and spray-up moulding
BS EN 12094-9:2003 BS EN 12094-9:2003. Fixed firefighting systems. Components for gas extinguishing systems. Requirements and test methods for special fire detectors
BS EN 12094-4:2004 BS EN 12094-4:2004. Fixed firefighting systems. Components for gas extinguishing systems. Requirements and test methods for container valve assemblies and their actuators
BS ISO 10718:2002 BS ISO 10718:2002. Cork stoppers. Enumeration of colony-forming units of yeasts, moulds and bacteria capable of growth in an alcoholic medium
ISO6601 : 2002 EDTN 2 ISO6601 : 2002 EDTN 2. ISO6601 : 2002 Plastics- Friction and wear by sliding-identification of test parameters
BS EN 12613:2001 BS EN 12613:2001. Plastic warning devices for underground cables and pipelines with visual characteristics
BS EN 61300-3-31:2003 BS EN 61300-3-31:2003. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Coupled power ratio measu
BS EN 61300-2-46:2006 BS EN 61300-2-46:2006. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Damp heat cyclic
BS ISO/IEC 9579:2000 BS ISO/IEC 9579:2000. Information technology. Remote database access for SQL with security enhancement
BS EN 12373-16:2001 BS EN 12373-16:2001. Aluminium and aluminium alloys. Anodizing. Check for continuity of thin anodic oxidation coatings. Copper sulfate test
BS EN 60034-11:2004 BS EN 60034-11:2004. Rotating electrical machines. Thermal protection
BS ISO 18878:2004 BS ISO 18878:2004. Mobile elevating work platforms. Operator (driver) training
BS EN 985:2001 BS EN 985:2001. Textile floor coverings. Castor chair test
BS ISO/PAS 17984:2001 BS ISO/PAS 17984:2001. Machine-made textile floor coverings. Determination of dimensional changes after exposure to heat and/or water
BS ISO 1173:2001 BS ISO 1173:2001. Assembly tools for screws and nuts. Drive ends for hand and machine-operated screwdriver bits and connecting parts. Dimensions, torque testing
BS EN 61850-7-2:2003 BS EN 61850-7-2:2003. Communication networks and systems in substations. Basic communication structure for substation and feeder equipment. Abstract communication service interfac
BS ISO 15664:2001 BS ISO 15664:2001. Acoustics.Noise control design procedures for open plant
BS EN 61850-7-4:2003 BS EN 61850-7-4:2003. Communication networks and systems in substations. Basic communication structure for substation and feeder equipment. Compatible logical node classes and dat
BS EN 13473-1:2001 BS EN 13473-1:2001. Reinforcement. Specifications for multi-axial multi-ply fabrics. Designation
BS EN 13473-2:2001 BS EN 13473-2:2001. Reinforcement. Specifications for multi-axial multi-ply fabrics. Methods of test and general requirements
BS EN 13473-3:2001 BS EN 13473-3:2001. Reinforcement. Specifications for multi-axial multi-ply fabrics. Specific requirements
BS EN 12935:2001 BS EN 12935:2001. Feather and down. Hygiene and cleanliness requirements
ISO12098 : 2004 EDTN.2 ISO12098 : 2004 EDTN.2. ISO12098 : 2004 (HEADER) EDTN.2 Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 15-pole connector for vehicles wi
DD ENV 61111:2002 DD ENV 61111:2002. Matting of insulating material for electrical purposes
DD ENV 61112:2002 DD ENV 61112:2002. Blankets of insulating material for electrical purposes
BS EN 61477:2002 BS EN 61477:2002. Live working. Minimum requirements for the utilization of tools, devices and equipment
BS 6079-1:2002 BS 6079-1:2002. Project management. Guide to project management
BS EN 60950-21:2003 BS EN 60950-21:2003. Information technology equipment. Safety. Remote power feeding
PD IEC TR 61328:2003 PD IEC TR 61328:2003. Live working. Guidelines for the installation of transmission line conductors and earthwires. Stringing equipment and accessory items
ISO9328-1 : 2003 EDTN 2 ISO9328-1 : 2003 EDTN 2. ISO9328-1 : 2003 Steel plates and strips for pressure purposes - Technical delivery conditions. Part 1: General requirements
ISO9328-2 : 2004 EDTN2 ISO9328-2 : 2004 EDTN2. ISO9328-2 : 2004 Steel flat products for pressure purposes - Technical delivery conditions - . Part 2: Non-alloy and alloy steels with specified elevated
ISO9328-4 : 2004 EDTN2 ISO9328-4 : 2004 EDTN2. ISO9328-4 : 2004 Steel flat products for pressure purposes - Technical delivery conditions . Part 4: Nickel-alloy steels with specified low temperature p
BS EN ISO 15721:2001 BS EN ISO 15721:2001. Metallic coatings. Porosity tests. Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour
BS 7671:2001 BS 7671:2001. Requirements for electrical installations. IEE Wiring Regulations. Sixteenth edition
BSISO/IEC1989 : 2002 BSISO/IEC1989 : 2002 .
BS EN 14048:2002 BS EN 14048:2002. Packaging. Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium. Method by measuring the oxygen demand in a closed resp
BS EN 13942:2003 BS EN 13942:2003. Petroleum and natural gas industries. Pipeline transportation. Pipeline valves
KIT 78 KIT 78. Gas appliances offer (BS 5871 and PAS 42)
HB 10192:2001 HB 10192:2001. Guide to BS EN 13549. Cleaning services, basic requirements and recommendations for quality measuring systems
BS 8020:2002 BS 8020:2002. Tools for live working. Insulating hand tools for work on or near conductor rail systems operating at voltages up to 1000 V a.c. or 1500 V d.c.
PD 0017:2001 PD 0017:2001. Business documents. Guidance on effective layout and presentation
BS ISO 5536:2002 BS ISO 5536:2002. Milk fat products. Determination of water content. Karl Fischer method
BS ISO 18054:2004 BS ISO 18054:2004. Oils of orris rhizome (Iris pallida Lam. or Iris germanica L.). Determination of irone content. Method using gas chromatography on a capillary column
BS EN 13219:2001 BS EN 13219:2001. Gymnastic equipment. Trampolines. Functional and safety requirements, test methods
BS ISO 128-40:2001 BS ISO 128-40:2001. Technical drawings. General principles of presentation. Basic conventions for cuts and sections
WD/AMD13402 (CORR TO BS6493-1.4 : 1992) WD/AMD13402 (CORR TO BS6493-1.4 : 1992). BS6493-1.4 : 1992 Semiconductor devices. Part 1: Discrete devices. Section 1.4: Recommendations for microwave devices
BS ISO 128-44:2001 BS ISO 128-44:2001. Technical drawings. General principles of presentation. Sections on mechanical engineering drawings
BS ISO 128-50:2001 BS ISO 128-50:2001. Technical drawings. General principles of presentation. Basic conventions for representing areas on cuts and sections
BS ISO 3019-1:2001 BS ISO 3019-1:2001. Hydraulic fluid power. Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors. Inch series shown in metric units
BS ISO 15739:2003 BS ISO 15739:2003. Photography. Electronic still-picture imaging. Noise measurements
02/108144 DC 02/108144 DC. BS ISO 21467. Earth-moving machinery. Horizontal directional drills. Definitions and specifications
PD ISO/TR 13570:2001, ISO/TR 13570:2001 PD ISO/TR 13570:2001, ISO/TR 13570:2001. Guidelines for the application of the ISO 7176 series on wheelchairs
BS EN 14114:2002 BS EN 14114:2002. Hygrothermal performance of building equipment and industrial installations. Calculation of water vapour diffusion. Cold pipe insulation systems
BS EN 126:2004 BS EN 126:2004. Multifunctional controls for gas burning appliances
BS EN 13053:2001 BS EN 13053:2001. Ventilation for buildings. Air handling units. Ratings and performance for units, components and sections
BS EN 13030:2001 BS EN 13030:2001. Ventilation for buildings. Terminals. Performance testing of louvres subjected to simulated rain
BS EN 12589:2001 BS EN 12589:2001. Ventilation for buildings. Air terminal units. Aerodynamic testing and rating of constant and variable rate terminal units
BS EN 12516-2:2004 BS EN 12516-2:2004. Industrial vales. Shell design strength. Calculation method for steel valve shells
BS ISO/IEC 15504-2:2003 BS ISO/IEC 15504-2:2003. Software engineering. Process assessment. Performing an assessment
BS ISO/IEC 15504-3:2004 BS ISO/IEC 15504-3:2004. Information technology. Process assessment. Guidance on performing an assessment
BS EN 12441-3:2002 BS EN 12441-3:2002. Zinc and zinc alloys. Chemical analysis. Determination of lead, cadmium and copper. Flame atomic absorption spectometric method
BS 7858:2004 BS 7858:2004. Security screening of individuals employed in a security environment. Code of practice
BS 8406:2003 BS 8406:2003. Event stewarding and crowd safety services. Code of practice
BS EN 14820:2004 BS EN 14820:2004. Single-use containers for human venous blood specimen collection
BS EN 1991-3:2006 BS EN 1991-3:2006. Eurocode 1. Actions on structures. Actions induced by cranes and machines
BS EN 1993-1-6:2007 BS EN 1993-1-6:2007. Eurocode 3. Design of steel structures. Strength and stability of shell structures
BS EN 1993-4-1:2007 BS EN 1993-4-1:2007. Eurocode 3. Design of steel structures. Silos
BS IEC 61241-4:2001, IEC 61241-4:2001 BS IEC 61241-4:2001, IEC 61241-4:2001. Electrical apparatus for use in the presence of combustible dust. Type of protection "pD"
BS EN 1993-4-2:2007 BS EN 1993-4-2:2007. Eurocode 3. Design of steel structures. Tanks
BS EN 1993-4-3:2007 BS EN 1993-4-3:2007. Eurocode 3. Design of steel structures. Pipelines
BS EN 1998-4:2006 BS EN 1998-4:2006. Eurocode 8. Design of structures for earthquake resistance. Silos, tanks and pipelines
BS EN 1992-3:2006 BS EN 1992-3:2006. Eurocode 2. Design of concrete structures. Liquid retaining and containing structures
DD ENV 1996-2:2001 DD ENV 1996-2:2001. Eurocode 6. Design of masonry structures. Design, selection of materials and execution of masonry (together with United Kingdom National Application Document)
BS EN 1996-3:2006 BS EN 1996-3:2006. Eurocode 6. Design of masonry structures. Simplified calculation methods for unreinforced masonry structures
BS EN 1997-2:2007 BS EN 1997-2:2007. Eurocode 7. Geotechnical design. Ground investigation and testing
BS EN 13573:2001 BS EN 13573:2001. Inland navigation vessels. Anchoring, coupling, towing, hauling and mooring systems
BS EN 13574:2001 BS EN 13574:2001. Inland navigation vessels. Permanently installed climbing devices with a length not exceeding 5 m
BS ISO/IEC 15437:2001 BS ISO/IEC 15437:2001. Information technology. Enhancements to LOTOS (E-LOTOS)
BS EN ISO 4263-1:2004 BS EN ISO 4263-1:2004. Petroleum and related products. Determination of the ageing behaviour of inhibited oils and fluids. TOST test. Procedure for mineral oils
BS ISO/IEC 20926:2003 BS ISO/IEC 20926:2003. Software engineering. IFPUG 4.1 Unadjusted functional size measurement method. Counting practices manual
BS EN 1263-1:2002 BS EN 1263-1:2002. Safety nets. Safety requirements, test methods
BS EN 60749-1:2003 BS EN 60749-1:2003. Semiconductor devices. Mechanical and climatic test methods. General
BS EN 60143-1:2004 BS EN 60143-1:2004. Series capacitors for power systems. General
BS EN 61969-3:2001, IEC 61969-3:2001 BS EN 61969-3:2001, IEC 61969-3:2001. Mechanical structures for electronic equipment. Outdoor enclosures. Sectional specification. Climatic, mechanical tests and s
BS EN 61850-5:2003 BS EN 61850-5:2003. Communication networks and systems in substations. Communication requirements for functions and device models
BS EN 14089:2002 BS EN 14089:2002. Space product assurance. The control of limited shelf-life materials
WD/ISO/IEC15457-3 : 2002 EDTN 1 WD/ISO/IEC15457-3 : 2002 EDTN 1. ISO/IEC15457-3 : 2002 Identification cards- Thin flexible cards. Part 3: Test methods
BS EN ISO 11623:2002 BS EN ISO 11623:2002. Transportable gas cylinders. Periodic inspection and testing of composite gas cylinders
PD 6677:2002 PD 6677:2002. Implementation guide for NATO AQAP-160 incorporating all AQAP-160 text and relevant ISO text
BS EN 14090:2002 BS EN 14090:2002. Space product assurance. Flammability testing for the screening of space materials
BS EN 14091:2002 BS EN 14091:2002. Space product assurance. Thermal vacuum outgassing test for the screening of space materials
BS EN 14092:2002 BS EN 14092:2002. Space engineering. Space environment
BS EN 14093:2002 BS EN 14093:2002. Space project management. Organization and conduct of reviews
ISO15637-2 : 2002 (R08) EDTN 1 ISO15637-2 : 2002 (R08) EDTN 1. ISO15637-2 : 2002 Holding fixtures of cylindrical abrasive sleeves. Part 2: Holding fixtures for stationary machines
BS 3065:2001, ISO 669:2000 BS 3065:2001, ISO 669:2000. Resistance welding. Resistance welding equipment. Mechanical and electrical requirements
ISO16670 : 2003 EDTN1 ISO16670 : 2003 EDTN1. ISO16670 : 2003 Timber structures - Joints made with mechanical fasteners - Quasi-static reversed-cyclic test method
BS ISO 15188:2001 BS ISO 15188:2001. Project management guidelines for terminology standardization
BS ISO 18903:2002 BS ISO 18903:2002. Imaging materials. Films and paper. Determination of dimensional change
BS EN ISO 21007-1:2005 BS EN ISO 21007-1:2005. Gas cylinders. Identification and marking using radio frequency identification technology. Reference architecture and terminology
BS EN ISO 21007-2:2005 BS EN ISO 21007-2:2005. Gas cylinders. Identification and marking using radio frequency identification technology. Numbering schemes for radio frequency identification
ISO9427 : 2003 EDTN 2 ISO9427 : 2003 EDTN 2. ISO9427 : 2003 Wood-based panels- Determination of density
PD ISO/TR 15489-2:2001 PD ISO/TR 15489-2:2001. Information and documentation. Records management. Guidelines
BS EN 12098-2:2001 BS EN 12098-2:2001. Controls for heating systems. Optimum start-stop control equipment for hot water heating systems
BS EN ISO 11135-1:2007 BS EN ISO 11135-1:2007. Sterilization of health care products. Ethylene oxide. Requirements for development, validation and routine control of a sterilization process for medica
BS EN 60371-1:2003 BS EN 60371-1:2003. Specification for insulating materials based on mica. Definitions and general requirements
BS EN 60715:2001, IEC 60715:1981+A1:1995 BS EN 60715:2001, IEC 60715:1981+A1:1995. Dimensions of low-voltage switchgear and controlgear. Standardized mounting on rails for mechanical support of electr
BS EN ISO 14895:2003 BS EN ISO 14895:2003. Small craft. Liquid-fuelled galley stoves
PD ISO/IEC TR 9126-4:2004 PD ISO/IEC TR 9126-4:2004. Software engineering. Product quality. Quality in use metrics
ISO10483-1 : 2004 EDTN 2 ISO10483-1 : 2004 EDTN 2. ISO10483-1 : 2004 Road vehicles - Intelligent power switches -. Part 1: High-side intelligent power switch
BS EN ISO 17665-1:2006 BS EN ISO 17665-1:2006. Sterilization of health care products. Moist heat. Requirements for the development, validation and routine control of a sterilization process for medica
BS ISO/IEC 14756:1999 BS ISO/IEC 14756:1999. Information technology. Measurement and rating of performance of computer-based software systems (CD-ROM)
BS EN 14784-1:2005 BS EN 14784-1:2005. Non-destructive testing. Industrial computed radiography with storage phosphor imaging plates. Classification of systems
BS EN 14784-2:2005 BS EN 14784-2:2005. Non-destructive testing. Industrial computed radiography with storage phosphor imaging plates. General principles for testing of metallic materials using X-rays
BS EN 61788-5:2001 BS EN 61788-5:2001. Superconductivity. Matrix to superconductor volume ratio measurement. Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
BS ISO 10553:2003 BS ISO 10553:2003. Horology. Procedure for evaluating the accuracy of quartz watches
BS ISO 11442-5:1999 BS ISO 11442-5:1999. Technical product documentation. Handling of computer-based technical information. Documentation in the conceptual design stage of the development phase
BS EN ISO 11137-1:2006 BS EN ISO 11137-1:2006. Sterilization of health care products. Radiation. Requirements for development, validation and routine control of a sterilization process for medical dev
BS EN 61558-2-1:2007 BS EN 61558-2-1:2007. Safety of power transformers, power supplies, reactors and similar products. Particular requirements and tests for separating transformers and power supplies
BS EN 60512-11-7:2003 BS EN 60512-11-7:2003. Connectors for electronic equipment. Tests and measurements. Flowing mixed gas corrosion test
BS EN 1992-1-2:2004 BS EN 1992-1-2:2004. Eurocode 2. Design of concrete structures. General rules. Structural fire design
BS EN 60512-11-14:2003 BS EN 60512-11-14:2003. Connectors for electronic equipment. Tests and measurements. Climatic tests. Flowing single gas corrosion test
BS EN 1997-1:2004 BS EN 1997-1:2004. Eurocode 7. Geotechnical design. General rules
BS EN 61643-341:2001 BS EN 61643-341:2001. Low voltage surge protective devices. Specification for thyristor surge suppressors (TSS)
BS EN 60068-2-43:2003 BS EN 60068-2-43:2003. Environmental testing. Test methods. Test Kd. Hydrogen sulphide test for contacts and connections
BS EN 60068-2-42:2003 BS EN 60068-2-42:2003. Environmental testing. Test methods. Test Kc. Sulphur dioxide test for contacts and connections
BS ISO 18926:2006 BS ISO 18926:2006. Imaging materials. Information stored on magneto-optical (MO) discs. Method for estimating the life expectancy based on the effects of temperature and relative hum
BS EN 61746:2001, IEC 61746:2001 BS EN 61746:2001, IEC 61746:2001. Calibration of optical time-domain reflectometers (OTDRs)
BS EN 60534-5:2004 BS EN 60534-5:2004. Industrial-process control valves. Marking
BS ISO/IEC 13249-3:2003 BS ISO/IEC 13249-3:2003. Information technology. Database languages. SQL multimedia and application packages. Spatial
BS ISO/IEC 13249-5:2003 BS ISO/IEC 13249-5:2003. Information technology. Database languages. SQL multimedia and application packages. Still image
ISO5000 : 2005 EDTN3 ISO5000 : 2005 EDTN3. ISO5000 : 2005 Continuous hot-dip aluminium-silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities
BS EN 61086-3-1:2004 BS EN 61086-3-1:2004. Coatings for loaded printed wire boards (conformal coatings). Specifications for individual materials. Coatings for general purpose (class 1), high reliabili
BS EN 60641-2:2004 BS EN 60641-2:2004. Pressboard and presspaper for electrical purposes. Methods of tests
BS EN ISO 16048:2003 BS EN ISO 16048:2003. Passivation of corrosion-resistant stainless-steel fasteners
BS ISO 764:2002 BS ISO 764:2002. Horology. Magnetic resistant watches
ISO16978 : 2003 EDTN 1 ISO16978 : 2003 EDTN 1. ISO16978 : 2003 Wood-based panels- Determination of modulus of elasticity in bending and of bending strength
ISO16979 : 2003 EDTN 1 ISO16979 : 2003 EDTN 1. ISO16979 : 2003 Wood-based panels- Determination of moisture content
ISO16981 : 2003 EDTN 1 ISO16981 : 2003 EDTN 1. ISO16981 : 2003 Wood-based panels- Determination of surface soundness
ISO16983 : 2003 EDTN 1 ISO16983 : 2003 EDTN 1. ISO16983 : 2003 Wood-based panels- Determination of swelling in thickness after immersion in water
ISO16984 : 2003 EDTN 1 ISO16984 : 2003 EDTN 1. ISO16984 : 2003 Wood-based panels- Determination of tensile strength perpendicular to the plane of the board
ISO16985 : 2003 EDTN 1 ISO16985 : 2003 EDTN 1. ISO16985 : 2003 Wood-based panels- Determination of dimensional changes associated with changes in relative humidity
ISO16998 : 2003 EDTN 1 ISO16998 : 2003 EDTN 1. ISO16998 : 2003 Wood-based panels- Determination of moisture resistance - Boil test
ISO16999 : 2003 EDTN 1 ISO16999 : 2003 EDTN 1. ISO16999 : 2003 Wood-based panels- Sampling and cutting of test pieces
BS EN 13356:2001 BS EN 13356:2001. Visibility accessories for non-professional use. Test methods and requirements
BS ISO 6145-5:2001 BS ISO 6145-5:2001. Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Capillary calibration devices
BS ISO 6145-7:2001 BS ISO 6145-7:2001. Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Thermal mass-flow controllers
BS ISO 6145-9:2001 BS ISO 6145-9:2001. Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Saturation method
ISO/TR12391-4 : 2002 EDTN 1 ISO/TR12391-4 : 2002 EDTN 1. ISO/TR12391-4 : 2002 Gas cylinders- Refillable seamless steel - Performance tests. Part 4: Flawed cylinder cycle test
BS EN 13701:2001 BS EN 13701:2001. Space systems. Glossary of terms
DD ENV 1090-6:2001 DD ENV 1090-6:2001. Execution of steel structures. Supplementary rules for stainless steel
BS EN 4008-013:2006 BS EN 4008-013:2006. Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories. Positioner for crimping tool M22520/2-01. Product s
BS EN 14513:2005 BS EN 14513:2005. Transportable gas cylinders. Bursting disc pressure relief devices (excluding acetylene gas cylinders)
BS EN 4008-014:2006 BS EN 4008-014:2006. Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories. Turret for crimping tool M22520/31-01. Product stan
BS EN 3373-012:2005 BS EN 3373-012:2005. Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors. In-line splices, insulated and sealed, for crimping on copper conducto
BS EN 3373-013:2005 BS EN 3373-013:2005. Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors. In-line splices, insulated and moisture resistant, for crimping on cop
BS EN 3475-306:2005 BS EN 3475-306:2005. Aerospace series. Cables, electrical, aircraft use. Test methods. Continuity of conductors
BS EN 14208:2004 BS EN 14208:2004. Transportable gas cylinders. Specification for welded pressure drums up to 1000 litre capacity for the transport of gases. Design and construction
BS EN 3475-307:2005 BS EN 3475-307:2005. Cables, electrical, aircraft use. Test methods. Corona extinction voltage
BS EN 3475-415:2005 BS EN 3475-415:2005. Aerospace series. Cables, electrical, aircraft use. Test methods. Rapid change of temperature
BS EN 3475-416:2005 BS EN 3475-416:2005. Aerospace series. Cables, electrical, aircraft use. Test methods. Thermal stability
BS EN 3475-513:2005 BS EN 3475-513:2005. Aerospace series. Cables, electrical, aircraft use. Test methods. Deformation resistance (installation with plastic cable ties)
ISO14617-15 : 2002 EDTN 1 ISO14617-15 : 2002 EDTN 1. ISO14617-15 : 2002 Graphical symbols for diagrams-. Part 15: Installation diagrams and network maps
ISO6342 : 2003 EDTN 2 ISO6342 : 2003 EDTN 2. ISO6342 : 2003 Micrographics- Aperture cards- Method of measuring thickness of buildup area
BS EN 50123-1:2003 BS EN 50123-1:2003. Railway applications. Fixed installations. D.C. switchgear. General
BS ISO 4269:2001 BS ISO 4269:2001. Petroleum and liquid petroleum products. Tank calibration by liquid measurement. Incremental method using volumetric meters
DD ENV 12108:2001 DD ENV 12108:2001. Plastics piping systems. Guidance for the installation inside buildings of pressure systems for hot and cold water intended for human consumption
BS EN 12269-2:2003 BS EN 12269-2:2003. Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the "beam test". Long term test
BS EN 1504-3:2005 BS EN 1504-3:2005. Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. Structural and
ISO6930-2 : 2004 EDTN.1 ISO6930-2 : 2004 EDTN.1. ISO6930-2 : 2004 High yield strength steel plates and wide flats for cold forming. Part 2: Delivery condition for normalized, normalized rolled and as-
BS EN 14128:2003 BS EN 14128:2003. Durability of wood and wood-based products. Performance criteria for products for curative uses against wood attacking organisms as determined by biological tests
PD ES 59011:2001, ES 59011:2001 PD ES 59011:2001, ES 59011:2001. Specification for the representation of quality rules and metrics for hardware and software design languages
BS EN ISO 1562:2004 BS EN ISO 1562:2004. Dentistry. Casting gold alloys
WD/ISO/IEC15444-3 : 2002 EDTN 1 WD/ISO/IEC15444-3 : 2002 EDTN 1. ISO/IEC15444-3 : 2002 Information technology- JPEG 2000 image coding system: Motion JPEG 2000
ISO6755 : 2001 EDTN 2 ISO6755 : 2001 EDTN 2. ISO6755 : 2001 Dried sour cherries - Specification
BS ISO 11901-1:2003 BS ISO 11901-1:2003. Tools for pressing. Gas springs. General specifications
BS ISO/IEC 9797-2:2002 BS ISO/IEC 9797-2:2002. Information technology. Security techniques. Message authentication codes (MACs). Mechanisms using a dedicated hash-function
BS EN ISO 10993-15:2001 BS EN ISO 10993-15:2001. Biological evaluation of medical devices. Identification and quantification of degradation products from metals and alloys
PD ISO/TR 13881:2001, ISO/TR 13881:2000 PD ISO/TR 13881:2001, ISO/TR 13881:2000. Petroleum and natural gas industries. Classification and conformity assessment of products, processes and services
BS ISO 15350:2001 BS ISO 15350:2001. Steel and iron. Determination of total carbon and sulfur content. Infrared absorption method after combustion in an induction furnace (routine method)
BS ISO 11900-2:2001 BS ISO 11900-2:2001. Tools for pressing. Ball-lock punch retainers. Types C and D, reduced for light duty
BS 4987-2:2001 BS 4987-2:2001. Coated macadam (asphalt concrete) for roads and other paved areas. Specification for transport, laying and compaction
BS EN 13264:2001 BS EN 13264:2001. Ventilation for buildings. Floor mounted air terminal devices. Tests for structural classification
BS EN 13617-3:2004 BS EN 13617-3:2004. Petrol filling stations. Safety requirements for constuction and performance of shear valves
BS ISO/IEC 15474-2:2002 BS ISO/IEC 15474-2:2002. Information technology. CDIF framework. Modelling and extensibility
BS ISO 18055-1:2004 BS ISO 18055-1:2004. Photography and imaging. Inkjet media. Classification, nomenclature and dimensions. Photo-grade media (paper and film)
BS ISO/IEC 15475-1:2002 BS ISO/IEC 15475-1:2002. Information technology. CDIF transfer format. General rules for syntaxes and encodings
BS ISO/IEC 15475-2:2002 BS ISO/IEC 15475-2:2002. Information technology. CDIF transfer format. Syntax SYNTAX.1
BS ISO/IEC 15475-3:2002 BS ISO/IEC 15475-3:2002. Information technology. CDIF transfer format. Encoding ENCODING.1
BS ISO/IEC 15476-1:2002 BS ISO/IEC 15476-1:2002. Information technology. CDIF semantic metamodel. Foundation
BS ISO 7738:2001 BS ISO 7738:2001. Assembly tools for screws and nuts. Combination wrenches. Lengths of wrenches and maximum thickness of heads
BS ISO 10102:2001 BS ISO 10102:2001. Assembly tools for screws and nuts. Double-headed open-ended engineers' wrenches. Length of wrenches and thickness of the heads
BS ISO 10103:2001 BS ISO 10103:2001. Assembly tools for screws and nuts. Double-headed, flat and offset, box wrenches. Length of wrenches and thickness of the heads
BS ISO 10104:2001 BS ISO 10104:2001. Assembly tools for screws and nuts. Double-headed, deep offset and modified offset, box wrenches. Length of wrenches and thickness of the heads
BS ISO 6787:2001 BS ISO 6787:2001. Assembly tools for screws and nuts. Adjustable wrenches
BS ISO 2725-3:2001 BS ISO 2725-3:2001. Assembly tools for screws and nuts. Square drive sockets. Machine-operated sockets ("non-impact"). Dimensions
BS EN 60214-1:2003 BS EN 60214-1:2003. Tap-changers. Performance requirements and test methods
BS EN 62270:2004 BS EN 62270:2004. Hydroelectric power plant automation. Guide for computer-based control
NC/BSEN12004 : 2001 NC/BSEN12004 : 2001. BSEN12004 : 2001 Adhesives for tiles - Definitions and specifications
BS EN 13286-40:2003 BS EN 13286-40:2003. Unbound and hydraulically bound mixtures. Test method for determination of the direct tensile strength of hydraulically bound mixtures
PD IEC TR 62245:2002, IEC TR 62245:2002 PD IEC TR 62245:2002, IEC TR 62245:2002. Optical fibres. Measurement methods. Bend loss for A3 and A4 type fibres
BS EN 62090:2003 BS EN 62090:2003. Product package labels for electronic components using bar code and two-dimensional symbologies
BS EN 846-13:2001 BS EN 846-13:2001. Methods of test for ancillary components for masonry. Determination of resistance to impact, abrasion and corrosion of organic coatings
BS 6200-3.31.3:2002, ISO 15353:2001 BS 6200-3.31.3:2002, ISO 15353:2001. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of tin. Flame atomic absorpti
BS EN ISO 11545:2001 BS EN ISO 11545:2001. Agricultural irrigation equipment. Centre-pivot and moving lateral irrigation machines with sprayer or sprinkler nozzles. Determination of uniformity of wate
BS EN 60512-10-4:2003 BS EN 60512-10-4:2003. Connectors for electronic equipment. Tests and measurements. Test 10d. Electrical overload (connectors)
BS EN 61643-331:2003 BS EN 61643-331:2003. Low voltage surge protective devices. Specification for metal oxide varistors (MOV)
BS 15000-2:2003 BS 15000-2:2003. IT service management. Code of practice for service management
BS EN 60139:2001, IEC 60139:2000 BS EN 60139:2001, IEC 60139:2000. Preparation of outline drawings for cathode-ray tubes, their components, connections and gauges
BS ISO 6099:2001 BS ISO 6099:2001. Fluid power systems and components. Cylinders. Identification code for mounting dimensions and mounting types
BS EN 14066:2003 BS EN 14066:2003. Natural stone test methods. Determination of resistance to ageing by thermal shock
BS ISO 10100:2001 BS ISO 10100:2001. Hydraulic fluid power. Cylinders. Acceptance tests
BS IEC 61513:2001 BS IEC 61513:2001. Nuclear power plants. Instrumentation and control for systems important to safety. General requirements for systems
BS EN 60966-2-4:2003 BS EN 60966-2-4:2003. Radio frequency and coaxial cable assemblies. Detail specification for cable assemblies for radio and TV receivers Frequency range 0 to 3000 MHz, IEC 61169-2
BS EN 60966-2-5:2003 BS EN 60966-2-5:2003. Radio frequency and coaxial cable assemblies. Detail specification for cable assemblies for radio and TV receivers. Frequency range 0 to 1000 MHz, IEC 61169-
06/30046204 DC 06/30046204 DC. IEC 61558-2-16. Safety of power transformers, power supply units and similar. Part 2-16. Particular requirements for power supply units and similar
BS EN 60966-2-6:2003 BS EN 60966-2-6:2003. Detail specification for cable assemblies for radio and TV receivers. Frequency range 0 to 3000 MHz, IEC 61169-24 connectors
HB 10182:2001 HB 10182:2001. Environmental Management Systems for SMEs
BS EN 4604-002:2006 BS EN 4604-002:2006. Aerospace series. Cable, electrical, for signal transmission. General
BS EN 623-3:2001 BS EN 623-3:2001. Advanced technical ceramics. Monolithic ceramics. General and textural properties. Determination of grain size and size distribution (characterized by the linear int
BS EN 725-12:2001 BS EN 725-12:2001. Advanced technical ceramics. Methods of test for ceramic powders. Chemical analysis of zirconia
BS EN 62115:2005 BS EN 62115:2005. Electric toys. Safety
BS EN 845-1:2001 BS EN 845-1:2001. Specification for ancillary components for masonry. Ties, tension straps, hangers and brackets
BS EN 62071:2001, IEC 62071:2000 BS EN 62071:2001, IEC 62071:2000. Helical-scan compressed digital video cassette recording system using 6,35mm magnetic tape. Forum D-7
BS EN ISO 7730:2005 BS EN ISO 7730:2005. Ergonomics of the thermal environment. Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local th
BS EN 50065-4-4:2003 BS EN 50065-4-4:2003. Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz. Low voltage decoupling filters. Impedance filter
BS EN 671-1:2001 BS EN 671-1:2001. Fixed fire fighting systems. Hose systems. Hose reels with semi-rigid hose
BS EN 50065-4-5:2003 BS EN 50065-4-5:2003. Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz. Low voltage decoupling filters. Segmentation filter
BS EN 13068-3:2001 BS EN 13068-3:2001. Non-destructive testing. Radioscopic testing. General principles of radioscopic testing of metallic materials by X- and gamma rays
BS ISO 1925:2001 BS ISO 1925:2001. Mechanical vibration. Balancing. Vocabulary
BS EN 845-2:2001 BS EN 845-2:2001. Specification for ancillary components for masonry. Lintels
BS 123100-003:2001 BS 123100-003:2001. System of quality assessment. Capability detail specification. Rigid single-sided and double-sided printed boards with plain holes
BS EN 845-3:2001 BS EN 845-3:2001. Specification for ancillary components for masonry. Bed joint reinforcement of steel meshwork
BS EN 13300:2001 BS EN 13300:2001. Paints and varnishes. Water-borne coating materials and coating systems for interior walls and ceilings. Classification
BS 123200-003:2001 BS 123200-003:2001. System of quality assessment. Capability detail specification. Rigid double-sided printed boards with plated-through holes
BS EN 1634-3:2001 BS EN 1634-3:2001. Fire resistance tests for door and shutter assemblies. Smoke control doors and shutters
BS EN 13238:2001 BS EN 13238:2001. Reaction to fire tests for building products. Conditioning procedures and general rules for selection of substrates
BS 123300-003:2001 BS 123300-003:2001. System of quality assessment. Capability detail specification. Rigid multilayer printed boards
BS 123400:2001 BS 123400:2001. System of quality assessment. Sectional specification. Flexible single-sided and double-sided printed boards without through-connections
BS 123400-003:2001 BS 123400-003:2001. System of quality assessment. Capability detail specification. Flexible single-sided and double-sided printed boards without through-connections
BS 123500:2001 BS 123500:2001. System of quality assessment. Sectional specification. Flexible single-sided and double-sided printed boards with through-connections
ISO9516-1 : 2003 EDTN 1 ISO9516-1 : 2003 EDTN 1. ISO9516-1 : 2003 Iron ores- Determination of various elements by X-ray fluorescence spectrometry. Part 1: Comprehensive procedure
BS EN 13286-45:2003 BS EN 13286-45:2003. Unbound and hydraulically bound mixtures. Test method for the determination of the workability period of hydraulically bound mixtures
BS 123500-003:2001 BS 123500-003:2001. System of quality assessment. Capability detail specification. Flexible Single-sided and double-sided printed boards with through-connections
BS EN 998-2:2002 BS EN 998-2:2002. Specification for mortar for masonry. Masonry mortar
BS 123600:2001 BS 123600:2001. System of quality assessment. Sectional specification. Flex-rigid multilayer printed boards with through-connections
BS 123600-003:2001 BS 123600-003:2001. System of quality assessment. Capability detail specification. Flex-rigid multilayer printed boards with through-connections
BS 123700:2001 BS 123700:2001. System of quality assessment. Sectional specification. Flex-rigid double-sided printed boards with through-connections
BS 123700-003:2001 BS 123700-003:2001. System of quality assessment. Capability detail specification. Flex-rigid double-sided printed boards with through-connections
BS 123800:2001 BS 123800:2001. System of quality assessment. Sectional specification. Flexible multilayer printed boards with through-connections
BS EN 14188-1:2004 BS EN 14188-1:2004. Joint fillers and sealants. Specifications for hot applied sealants
BS 123800-003:2001 BS 123800-003:2001. System of quality assessment. Capability detail specification. Flexible multilayer printed boards with through-connections
BS EN 14190:2005 BS EN 14190:2005. Gypsum plasterboard products from reprocessing. Definitions, requirements and test methods
BS EN ISO 11114-4:2005 BS EN ISO 11114-4:2005. Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents. Test methods for selecting metallic materials resistant to
BS EN ISO 11137-2:2007 BS EN ISO 11137-2:2007. Sterilization of health care products. Radiation. Establishing the sterilization dose
BS ISO 1206:2001 BS ISO 1206:2001. Rolling bearings. Needle roller bearings, dimension series 48, 49 and 69. Boundary dimensions and tolerances
BS EN 60998-2-2:2004 BS EN 60998-2-2:2004. Connecting devices for low voltage circuits for household and similar purposes. Particular requirements for connecting devices as separate entities with scre
BS EN 62199:2004 BS EN 62199:2004. Bushings for D.C. application
BS EN 13150:2001 BS EN 13150:2001. Workbenches for laboratories. Dimensions, safety requirements and test methods
BS EN 61300-1:2003 BS EN 61300-1:2003. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. General and guidance
BS EN 60137:2003 BS EN 60137:2003. Insulated bushings for alternating voltages above 1000 V
BS 2846-8:2001, ISO 16269-7:2001 BS 2846-8:2001, ISO 16269-7:2001. Guide to statistical interpretation of data. Median. Estimation and confidence intervals
BS EN ISO 15027-1:2002 BS EN ISO 15027-1:2002. Immersion suits. Constant wear suits, requirements including safety
KIT 79 KIT 79. Information technology. Cabling systems pack
BS EN ISO 15027-2:2002 BS EN ISO 15027-2:2002. Immersion suits. Abandonment suits, requirements including safety
BS EN ISO 15027-3:2002 BS EN ISO 15027-3:2002. Immersion suits. Test methods
BS ISO 12637-5:2001 BS ISO 12637-5:2001. Graphic technology. Multilingual terminology of printing arts. Screen printing terms
BS EN ISO 13998:2003 BS EN ISO 13998:2003. Protective clothing. Aprons, trousers and vests protecting against cuts and stabs by hand knives
BS EN 60958-3:2003 BS EN 60958-3:2003. Digital audio interface. Consumer applications
BS EN 61883-1:2003 BS EN 61883-1:2003. Consumer audio/video equipment. Digital interface. General
BS EN 60268-4:2004 BS EN 60268-4:2004. Sound system equipment. Microphones
BS 5655-6:2002 BS 5655-6:2002. Lifts and service lifts. Code of practice for the selection and installation of new lifts
BS EN 50266-1:2001 BS EN 50266-1:2001. Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Apparatus
BS EN 1304:2005 BS EN 1304:2005. Clay roofing tiles and fittings. Product definitions and specifications
BS EN 13280:2001 BS EN 13280:2001. Specification for glass fibre reinforced cisterns of one-piece and sectional construction, for the storage, above ground, of cold water
BS EN 539-1:2005 BS EN 539-1:2005. Clay roofing tiles for discontinuous laying. Determination of physical characteristics. Impermeability test
BS EN 539-2:2006 BS EN 539-2:2006. Clay roofing tiles for discontinuous laying. Determination of physical characteristics. Test for frost resistance
BS ISO 1268-7:2001 BS ISO 1268-7:2001. Fibre-reinforced plastics. Methods of producing test plates. Resin transfer moulding
ISO22654 : 2002 EDTN 1 ISO22654 : 2002 EDTN 1. ISO22654 : 2002 Footwear- Test methods for outsoles- Tensile strength and elongation
BS EN 534:2006 BS EN 534:2006. Corrugated bitumen sheets. Product specification and test methods
BS EN 14782:2006 BS EN 14782:2006. Self-supporting metal sheet for roofing, external cladding and internal lining. Product specification and requirements
ISO15673 : 2005 EDTN1 ISO15673 : 2005 EDTN1. ISO15673 : 2005 Guidelines for the simplified design of structural reinforced concrete for buildings
ISO20865 : 2002 EDTN 1 ISO20865 : 2002 EDTN 1. ISO20865 : 2002 Footwear- Test methods for outsoles- Compression energy
BS EN 14783:2006 BS EN 14783:2006. Fully supported metal sheet and strip for roofing, external cladding and internal lining. Product specification and requirements
BS EN ISO 3892:2001 BS EN ISO 3892:2001. Conversion coatings on metallic materials. Determination of coating mass per unit area. Gravimetric methods
BS EN 14437:2004 BS EN 14437:2004. Determination of the uplift resistance of clay or concrete tiles for roofing. Roof system test method
BS EN 721:2004 BS EN 721:2004. Leisure accommodation vehicles. Safety ventilation requirements
BS EN 13211:2001 BS EN 13211:2001. Air quality. Stationary source emissions. Manual method of determination of the concentration of total mercury
BS EN 12701:2001 BS EN 12701:2001. Structural adhesives. Storage. Determination of words and phrases relating to the product life of structural adhesives and related materials
ISO/IEC8825-4 : 2002 EDTN1 ISO/IEC8825-4 : 2002 EDTN1. ISO/IEC8825-4:2003 Information technology - Abstract Syntax Notation One (ASN.1) Encoding Rules. Part 4: XML Encoding Rules (XER) (Common text ve
BS ISO 17359:2003 BS ISO 17359:2003. Condition monitoring and diagnostics of machines. General guidelines
BS ISO 10109-11:2001 BS ISO 10109-11:2001. Optics and optical instruments. Environmental requirements. Optical instruments for outdoor conditions of use
BS EN 14177:2003 BS EN 14177:2003. Foodstuffs. Determination of patulin in clear and cloudy apple juice and puree. HPLC method with liquid/liquid partition clean-up
BS EN 14150:2006 BS EN 14150:2006. Geosynthetic barriers. Determination of permeability to liquids
BS EN 722-1:2004 BS EN 722-1:2004. Leisure accommodation vehicles. Liquid fuel heating systems. Caravans and caravan holiday homes
BS EN 1648-1:2004 BS EN 1648-1:2004. Leisure accommodation vehicles. 12 V direct current extra low voltage electrical installations. Caravans
BS EN 14176:2003 BS EN 14176:2003. Foodstuffs. Determination of domoic acids in mussels by HPLC
BS EN 1648-2:2005 BS EN 1648-2:2005. Leisure accommodation vehicles. 12 V direct current extra low voltage electrical installations. Motor caravans
BS EN 13385:2002 BS EN 13385:2002. Transportable gas cylinders. Battery vehicles for permanent and liquefied gases (excluding acetylene). Inspection at time of filling
BS EN 61669:2001, IEC 61669:2001 BS EN 61669:2001, IEC 61669:2001. Electroacoustics. Equipment for the measurement of real-ear acoustical characteristics of hearing aids
BS ISO 12368:2001 BS ISO 12368:2001. Agricultural vehicles. Mechanical hook-type connections on towing vehicles. Test methods and requirements
BS ISO 17493:2000 BS ISO 17493:2000. Clothing and equipment for protection against heat. Test method for convective heat resistance using a hot air circulating oven
BS EN 1089-2:2002 BS EN 1089-2:2002. Transportable gas cylinders. Gas cylinder identification (excluding LPG). Precautionary labels
ISO3581 : 2003 EDTN 2 ISO3581 : 2003 EDTN 2. ISO3581 : 2003 Welding consumables- Covered electrodes for manual metal arc welding of stainless and heat-resisting steels- Classification
BS EN 1089-3:2004 BS EN 1089-3:2004. Transportable gas cylinders. Gas cylinder identification (excluding LPG). Colour coding
BS EN 1149-3:2004 BS EN 1149-3:2004. Protective clothing. Electrostatic properties. Test methods for measurement of charge decay
DD ENV 1565-2:2001 DD ENV 1565-2:2001. Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Styrene copolymer blends (SAN + PVC). Guidance for
KIT 80 KIT 80. Insulating and sheathing materials for cables
BS ISO 22972:2004 BS ISO 22972:2004. Essential oils. Analysis by gas chromatography on chiral capillary columns. General method
BS EN 326-3:2003 BS EN 326-3:2003. Wood-based panels. Sampling, cutting and inspection. Inspection of an isolated lot of panels
BS EN ISO 1520:2001 BS EN ISO 1520:2001. Paints and varnishes. Cupping test
BS EN ISO 407:2004 BS EN ISO 407:2004. Small medical gas cylinders. Pin-index yoke-type valve connections
BS EN ISO 15496:2004 BS EN ISO 15496:2004. Textiles. Measurement of water vapour permeability of textiles for the purpose of quality control
BS EN ISO 16931:2001 BS EN ISO 16931:2001. Animal and vegetable fats and oils. Determination of polymerized triglycerides content by high performance size-exclusion chromatography (HPSEC)
BS EN 14141:2003 BS EN 14141:2003. Valves for natural gas transportation in pipelines. Performance requirements and tests
BS EN ISO 16148:2006 BS EN ISO 16148:2006. Gas cylinders. Refillable seamless gas cylinders. Acoustic emission testing (AT) for periodic inspection
BS EN 3748:2001 BS EN 3748:2001. Aerospace series. O-ring grooves. Dimensions
PD IEC TR 62283:2003 PD IEC TR 62283:2003. Nuclear radiation. Fibre optic guidance
BS EN 61834-10:2001, IEC 61834-10:2001 BS EN 61834-10:2001, IEC 61834-10:2001. Recording. Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625
BS EN 13110:2002 BS EN 13110:2002. Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG). Design and construction
EP 220 EP 220. BSI Electronic Book. PS 9000
KIT 81 KIT 81. Essential oils. Physiochemical set
KIT 82 KIT 82. Reference materials set
BS ISO 19378:2003 BS ISO 19378:2003. Lubricants, industrial oils and related products (class L). Machine-tool lubricants. Categories and specifications
BS EN ISO 10297:2006 BS EN ISO 10297:2006. Transportable gas cylinders. Cylinder valves. Specification and type testing
BS EN 1504-8:2004 BS EN 1504-8:2004. Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. Quality control
BS AU 50-4.1.1a:2001, ISO 4000-2:2001 BS AU 50-4.1.1a:2001, ISO 4000-2:2001. Tyres and wheels. Rim profiles and dimensions. Car rims. Specification for metric series rims. Sub-section 1.1a: Specificat
DD ENV 1519-2:2001 DD ENV 1519-2:2001. Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polyethylene (PE). Guidance for the assessment of
BSISO15360-1 : 2000 BSISO15360-1 : 2000 . BSISO15360-1 : 2000 Recycled pulps - Estimation of stickies and plastics. Part 1: Visual method
DD ENV 1451-2:2001 DD ENV 1451-2:2001. Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP). Guidance for the assessment of
DD ENV 1455-2:2001 DD ENV 1455-2:2001. Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Acrylonitrile-butadiene- styrene (ABS). Guidance f
DD 245:2002 DD 245:2002. Code of practice for management of false alarms
BS EN 14211:2005 BS EN 14211:2005. Ambient air quality. Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence
BS ISO/IEC 20970:2002 BS ISO/IEC 20970:2002. Information technology. Programming languages, their environments and system software interfaces. JEFF file format
BS ISO 15360-1:2000 BS ISO 15360-1:2000. Recycled pulps. Estimation of stickies and plastics. Visual method
BS EN 14212:2005 BS EN 14212:2005. Ambient air quality. Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
BS ISO 15361:2000 BS ISO 15361:2000. Pulps. Determination of zero-span tensile strength, wet or dry
BS EN 14137:2003 BS EN 14137:2003. Postal services. Quality of service. Measurement of loss of registered mail and other types of postal service using a track and trace system
BS EN 14142-1:2003 BS EN 14142-1:2003. Postal services. Address databases. Components of postal addresses
BS 7799-2:2002 BS 7799-2:2002. Information security management. Specification with guidance for use
BS EN 14155:2003 BS EN 14155:2003. Derivatives from coal pyrolysis. Carbon black feedstock. Specifications and test methods
BS EN 14157:2004 BS EN 14157:2004. Natural stones. Determination of abrasion resistance
BS EN 14156:2003 BS EN 14156:2003. Derivatives from coal pyrolysis. Coal tar based oils. Coal tar fuel. Specifications and test methods
BS EN 14158:2004 BS EN 14158:2004. Natural stone test methods. Determination of rupture energy
BS EN 14147:2003 BS EN 14147:2003. Natural stone test methods. Determination of resistance to ageing by salt mist
BS EN 14146:2004 BS EN 14146:2004. Natural stone test methods. Determination of the dynamic elastic modulus of elasticity (by measuring the fundamental resonance frequency)
ISO11898-4 : 2004 EDTN1 ISO11898-4 : 2004 EDTN1. ISO11898-4 : 2004 Road vehicles - Controller area network (CAN) -. Part 4: Time-triggered communication
CWA 14191:2001 CWA 14191:2001. Co-ordination of directory management domains (DMDs)
CWA 14193:2001 CWA 14193:2001. Directory synchronisation and the meta-directory. An analysis of issues and techniques
DD ENV 14138:2001 DD ENV 14138:2001. Lead and lead alloys. Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emissions spectrometry (ICP-ES), after separation by co
BS EN 39:2001 BS EN 39:2001. Loose steel tubes for tube and coupler scaffolds. Technical delivery conditions
BS EN 62093:2005 BS EN 62093:2005. Balance-of-system components for photovoltaic systems. Design qualification natural environments
BS EN 62068-1:2003 BS EN 62068-1:2003. Electrical insulation systems. Electrical stresses produced by repetitive impulses. General method of evaluation of electrical endurance
BS EN 14106:2003 BS EN 14106:2003. Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of free glycerol content
BS ISO/IEC 15504-4:2004 BS ISO/IEC 15504-4:2004. Information technology. Process assessment. Guidance on use for process improvement and process capability determination
BS ISO TR 9705-2:2001 BS ISO TR 9705-2:2001. Reaction to fire tests. Full scale room tests for surface products. Technical background and guidance
KIT 83 KIT 83. Archival documents standards & guidance kit
BS EN 1262:2003 BS EN 1262:2003. Surface active agents. Determination of pH value of solutions or dispersions
BS EN 14222:2003 BS EN 14222:2003. Stainless steel shell boilers
BS 684-2.14:2001, ISO 3960:2001 BS 684-2.14:2001, ISO 3960:2001. Methods of analysis of fats and fatty oils. Other methods. Determination of peroxide value
BS ISO 10294-4:2001 BS ISO 10294-4:2001. Fire-resistance tests. Fire dampers for air distribution systems. Test of thermal release mechanism
BS ISO 5658-4:2001 BS ISO 5658-4:2001. Reaction to fire tests. Spread of flame. Intermediate-scale test of vertical spread of flame with vertically oriented specimen
PD ISO/TR 18930:2001 PD ISO/TR 18930:2001. Imaging materials. Protocols for outdoor weathering experiments
PD ISO/TR 18931:2001 PD ISO/TR 18931:2001. Imaging materials. Recommendations for humidity measurement and control
BS EN ISO 14921:2001 BS EN ISO 14921:2001. Thermal spraying. Procedure for the application of thermally sprayed coatings for engineering components
BS EN 60335-2-105:2005 BS EN 60335-2-105:2005. Specification for safety of household and similar electrical appliances. Particular requirements for multifunctional shower cabinets
BS EN 62153-4-2:2004 BS EN 62153-4-2:2004. Metallic communication cable test methods. Electromagnetic compatibility. Screening and coupling attenuation. Injection clamp method
DD IEC PAS 61754-19:2001, IEC/PAS 61754-19:2001 DD IEC PAS 61754-19:2001, IEC/PAS 61754-19:2001. Fibre optic connector interfaces. Type SG connector family
DD IEC PAS 61754-20:2001, IEC PAS 61754-20:2001 DD IEC PAS 61754-20:2001, IEC PAS 61754-20:2001. Fibre optic connector interfaces. Type LC connector family
BS ISO 105-X16:2001 BS ISO 105-X16:2001. Textiles. Tests for colour fastness. Colour fastness to rubbing. Small areas
DD IEC PAS 61754-18:2001, IEC/PAS 61754-18:2001 DD IEC PAS 61754-18:2001, IEC/PAS 61754-18:2001. Fibre optic connector interfaces. Type MT-RJ connector family
BS ISO 11476:2000 BS ISO 11476:2000. Paper and board. Determination of CIE whiteness, C/2° (indoor illumination conditions)
DD ENV 12625-8:2001 DD ENV 12625-8:2001. Tissue paper and tissue products. Water absorption time, water absorption capacity. Manual and automated test method
BS EN 50117-3-1:2002 BS EN 50117-3-1:2002. Coaxial cables. Sectional specifications for cables used in telecom applications. Miniaturized cables used in digital communication systems
BS 1892-3:2003 BS 1892-3:2003. Gymnasium equipment. Sports mats. Specification for fire safety requirements for mats, mattresses and landing areas
BS EN 3567-001:2001 BS EN 3567-001:2001. Aerospace series. In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B. Technical specification
BS EN ISO 2815:2003, BS 3900-E9:2003 BS EN ISO 2815:2003, BS 3900-E9:2003. Paints and varnishes. Buchholz indentation test
BS EN 62070:2001 BS EN 62070:2001. Broadcast digital video tape recorders. Identification method for recording and/or reproduction error status
BS ISO/IEC 18019:2004 BS ISO/IEC 18019:2004. Software and system engineering. Guidelines for the design and preparation of user documentation for application software
DD IEC/PAS 62260:2001, IEC/PAS 62260:2001 DD IEC/PAS 62260:2001, IEC/PAS 62260:2001. Pulse/step return loss from measurement in the frequency domain using the inverse discrete fourier transformation (
BS EN ISO 11446:2002 BS EN ISO 11446:2002. Passenger cars and light commercial vehicles with 12 V systems. 13-pole connectors between towing vehicles and trailers. Dimensions and contact allocation
BS ISO 16366:2001 BS ISO 16366:2001. Tools for pressing. L-shaped guides
BS EN 61000-4-23:2001, IEC 61000-4-23:2000 BS EN 61000-4-23:2001, IEC 61000-4-23:2000. Electromagnetic compatibility (EMC). Testing and measurement techniques. Test methods for protective devices for
BS EN 61904:2001, IEC 61904:2000 BS EN 61904:2001, IEC 61904:2000. Video recording. Helical-scan digital component video cassette recording format using 12,65mm magnetic tape and incorporating data co
BS ISO 11843-3:2003 BS ISO 11843-3:2003. Capability of detection. Methodology for determination of the critical value for the response variable when no calibration data are used
BS ISO 11843-4:2003 BS ISO 11843-4:2003. Capability of detection. Methodology for comparing the minimum detectable value with a given value
BS EN 858-2:2003 BS EN 858-2:2003. Separator systems for light liquids (e.g. oil and petrol). Selection of nominal size, installation, operation and maintenance
BS EN 1825-2:2002 BS EN 1825-2:2002. Grease separators. Selection of nominal size, installation, operation and maintenance
BS EN ISO 13406-2:2002 BS EN ISO 13406-2:2002. Ergonomic requirements for work with visual display based on flat panels. Ergonomic requirements for flat panel displays
BS EN 50325-1:2002 BS EN 50325-1:2002. Industrial communication subsystem based on ISO 11898 (CAN) for controller-device interfaces. General requirements
BS EN 50325-4:2002 BS EN 50325-4:2002. Industrial communication subsystem based on ISO 11898 (CAN) for controller-device interfaces. CANopen
BS EN 13467:2001 BS EN 13467:2001. Thermal insulating products for building equipment and industrial installations. Determination of dimensions, squareness and linearity of preformed pipe insulation
BS EN 3567-003:2001 BS EN 3567-003:2001. Aerospace series. In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B. Single in-line couplers. Product standard
BS EN 3567-004:2001 BS EN 3567-004:2001. Aerospace series. In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B. Double in-line couplers. Product standard
BS EN 13468:2001 BS EN 13468:2001. Thermal insulating products for building equipment and industrial installations. Determination of trace quantities of water soluble chloride, fluoride, silicate, sod
BS EN 13469:2001 BS EN 13469:2001. Thermal insulating products for building equipment and industrial installations. Determination of water vapour transmission properties of preformed pipe insulation
BS EN 13470:2001 BS EN 13470:2001. Thermal insulating products for building equipment and industrial installations. Determination of the apparent density of preformed pipe insulation
BS ISO 4659:2003 BS ISO 4659:2003. Styrene-butadiene rubber (carbon black or carbon black and oil masterbatches). Evaluation procedure
BS EN 13471:2001 BS EN 13471:2001. Thermal insulating products for building equipment and industrial installations. Determination of the coefficient of thermal expansion
BS EN 13472:2001 BS EN 13472:2001. Thermal insulating products for building equipment and industrial installations. Determination of short term water absorption by partial immersion of preformed pipe
PP 8888-1:2001 (Pack of 5) PP 8888-1:2001 (Pack of 5). Engineering drawing practice. Part 1: A guide for schools and colleges to BS 8888:2001. Technical product documentation
BSISO/IEC13522-7 : 2001 (COVERS) BSISO/IEC13522-7 : 2001 (COVERS). BSISO/IEC1352-7 : 2001 Information technology - Coding of multimedia and hypermedia information -. Part 7: Interoperability and confo
BSISO/IEC13522-7 : 2001 (CD-ROM) BSISO/IEC13522-7 : 2001 (CD-ROM).
ISO301 : 2006 EDTN2 ISO301 : 2006 EDTN2. ISO 301 Zinc alloy ingots intended for casting -
DD ENV 50354:2001 DD ENV 50354:2001. Electrical arc test methods for material and garments, for use by workers at risk from exposure to an electrical arc
BS EN 12875-2:2002 BS EN 12875-2:2002. Mechanical dishwashing resistance of domestic utensils. Inspection of non-metallic articles
BS ISO 10540-3:2002 BS ISO 10540-3:2002. Animal and vegetable fats and oils. Determination of phosphorus content. Method using inductively coupled plasma (ICP) optical emission spectroscopy
DD CEN/TS 14429:2005 DD CEN/TS 14429:2005. Characterization of waste. Leaching behaviour tests. Influence of pH on leaching with initial acid/base addition
BS EN 4324:2002 BS EN 4324:2002. Aerospace series. Aluminium alloy AL-W42201. Filler metal for welding. Rod
01/105090 DC 01/105090 DC. BS EN 840-1. Mobile waste containers. Containers with 2 wheels with a capacity up to 400 l for comb lifting devices, dimensions and design
BS EN 840-1:2004 BS EN 840-1:2004. Mobile waste containers. Containers with 2 wheels with a capacity up to 400 l for comb lifting devices, dimensions and design
DD IEC TS 62143:2002 DD IEC TS 62143:2002. Electrical installations for lighting and beaconing of aerodromes. Aeronautical ground lighting systems. Guidelines for the development of a safety lifecycle
BS EN 2591-601:2001 BS EN 2591-601:2001. Elements of electrical and optical connection. Test methods. Optical elements. Insertion loss
BS EN 2591-602:2001 BS EN 2591-602:2001. Elements of electrical and optical connection. Test methods. Optical elements. Variation of attenuation and optical discontinuity
BS EN 2591-604:2001 BS EN 2591-604:2001. Elements of electrical and optical connection. Test methods. Optical elements. Cleaning capability of optical face
BS EN 2591-610:2001 BS EN 2591-610:2001. Elements of electrical and optical connection. Test methods. Optical elements. Effectiveness of cable attachment. Cable pulling
BS EN 2591-611:2001 BS EN 2591-611:2001. Elements of electrical and optical connection. Test methods. Optical elements. Effectiveness of cable attachment. Cable torsion
BS EN 840-2:2004 BS EN 840-2:2004. Mobile waste containers. Containers with 4 wheels with capacity up to 1 300 l with flat lid(s), for trunnion and/or comb lifting devices. Dimensions and design
BS EN 2591-612:2001 BS EN 2591-612:2001. Elements of electrical and optical connection. Test methods. Optical elements. Effectiveness of cable attachment. Cable axial compression
BS EN 2591-615:2001 BS EN 2591-615:2001. Elements of electrical and optical connection. Test methods. Optical elements. Connection integrity at temperature
BS EN 2591-6101:2001 BS EN 2591-6101:2001. Elements of electrical and optical connection. Test methods. Optical elements. Visual examination
BS EN 840-3:2004 BS EN 840-3:2004. Mobile waste containers. Containers with 4 wheels with capacity up to 1 300 l with dome lid(s), for trunnion and/or comb lifting devices. Dimensions and design
BS EN 2591-6301:2001 BS EN 2591-6301:2001. Elements of electrical and optical connection. Test methods. Optical elements. Endurance at temperature
BS EN 2591-6303:2001 BS EN 2591-6303:2001. Elements of electrical and optical connection. Test methods. Optical elements. Cold/low pressure and damp heat
BS EN 2591-6305:2001 BS EN 2591-6305:2001. Elements of electrical and optical connection. Test methods. Optical elements. Rapid change of temperature
BS EN 2591-6306:2001 BS EN 2591-6306:2001. Elements of electrical and optical connection. Test methods. Optical elements. Mould growth
BS EN 2591-6307:2001 BS EN 2591-6307:2001. Elements of electrical and optical connection. Test methods. Optical elements. Salt mist
BS EN 840-4:2004 BS EN 840-4:2004. Mobile waste containers. Containers with 4 wheels with capacity up to 1 700 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices. Dimensions
BS EN 2591-6314:2001 BS EN 2591-6314:2001. Elements of electrical and optical connection. Test methods. Optical elements. Immersion at low air pressure
BS EN 61828:2002, IEC 61828:2001 BS EN 61828:2002, IEC 61828:2001. Ultrasonics. Focusing transducers. Definitions and measurement methods for the transmitted fields
BS EN 2591-6315:2001 BS EN 2591-6315:2001. Elements of electrical and optical connection. Test methods. Optical elements. Fluid resistance
BS EN 840-5:2004 BS EN 840-5:2004. Mobile waste containers. Performance requirements and test methods
BS 1566-1:2002 BS 1566-1:2002. Copper indirect cylinders for domestic purposes. Open vented copper cylinders. Requirements and test methods
BS 5906:2005 BS 5906:2005. Waste management in buildings. Code of practice
BS EN 2591-6316:2001 BS EN 2591-6316:2001. Elements of electrical and optical connection. Test methods. Optical elements. Ozone resistance
BS EN ISO 15695:2001 BS EN ISO 15695:2001. Vitreous and porcelain enamels. Determination of scratch resistance of enamel finishes
PD IEC/TR 61000-1-4: 2005 PD IEC/TR 61000-1-4: 2005. Electromagnetic compatibility (EMC). General. Historical rationale for the limitation of power-frequency conducted harmonic current emmissions from
BS ISO/IEC TR 13335-5:2001 BS ISO/IEC TR 13335-5:2001. Information technology. Guidelines for the management of IT security. Management guidance of network security
BS EN 12759:2001 BS EN 12759:2001. Rubber- or plastic-coated fabrics. Determination of resistance to liquids
BS EN 4340:2002 BS EN 4340:2002. Aerospace series. Magnesium alloy MG-W68001. Filler metal for welding. Wire and rod
BS EN 12871:2001 BS EN 12871:2001. Wood-based panels. Performance specifications and requirements for load bearing boards for use in floors, walls and roofs
BS EN 13650:2001 BS EN 13650:2001. Soil improvers and growing media. Extraction of aqua regia soluble elements
BS EN 13651:2001 BS EN 13651:2001. Soil improvers and growing media. Extraction of calcium chloride/DTPA (CAT) soluble elements
BS EN 13652:2001 BS EN 13652:2001. Soil improvers and growing media. Extraction of water soluble nutrients and elements
BS EN 13654-1:2001 BS EN 13654-1:2001. Soil improvers and growing media. Determination of nitrogen. Modified Kjeldahl method
BS ISO/IEC TR 15580:2001 BS ISO/IEC TR 15580:2001. Information technology. Programming languages. Fortran. Floating-point exception handling
BS EN 14216:2004 BS EN 14216:2004. Cement. Composition, specifications and conformity criteria for very low heat special cements
BS EN 197-4:2004 BS EN 197-4:2004. Cement. Composition, specifications and conformity criteria for low early strength blastfurnace cements
BS IEC 60736:1982 BS IEC 60736:1982. Testing equipment for electrical energy meters
PD IEC TR 61354:1995, IEC TR 61354:1995 PD IEC TR 61354:1995, IEC TR 61354:1995. Electricity meters. Marking of auxiliary terminals for tariff devices
PD IEC TR 62056-41:1998, IEC TR 62056-41:1998 PD IEC TR 62056-41:1998, IEC TR 62056-41:1998. Electricity metering. Data exchange for meter reading, tariff and load control. Data exchange using wide ar
BS EN 60825-12:2004 BS EN 60825-12:2004. Safety of laser products. Safety of free space optical communication systems used for transmission of information
PD IEC TR 62056-51:1998, IEC TR 62056-51:1998 PD IEC TR 62056-51:1998, IEC TR 62056-51:1998. Electricity metering. Data exchange for meter reading, tariff and load control. Application layer protocols
PD IEC TR 62056-52:1998, IEC TR 62056-52:1998 PD IEC TR 62056-52:1998, IEC TR 62056-52:1998. Electricity metering. Data exchange for meter reading, tariff and load control. Communication protocols man
BS EN ISO 10350-2:2001 BS EN ISO 10350-2:2001. Plastics. Acquisition and presentation of comparable single-point data. Long-fibre-reinforced plastic
BS EN 9132:2006 BS EN 9132:2006. Aerospace series. Quality management systems. Data matrix quality requirements for parts marking
BS EN 61966-2-2:2003 BS EN 61966-2-2:2003. Multimedia systems and equipment. Colour measurement and management. Colour management. Extended RGB colour space. scRGB
BS EN 14144:2003 BS EN 14144:2003. Lifebuoys. Requirements, tests
BS EN 12216:2002 BS EN 12216:2002. Shutters, external blinds, internal blinds. Terminology, glossary and definitions
BS EN 14145:2003 BS EN 14145:2003. Holders for lifebuoys
BS ISO 19078:2006 BS ISO 19078:2006. Gas cylinders. Inspection of the cylinder installation, and requalification of high pressure cylinders for the on-board storage of natural gas as a fuel for automo
BS EN 13981-3:2006 BS EN 13981-3:2006. Aluminium and aluminium alloys. Products for structural railway applications. Technical conditions for inspection and delivery. Castings
BS EN 13981-4:2006 BS EN 13981-4:2006. Aluminium and aluminium alloys. Products for structural railway applications. Technical conditions for inspection and delivery. Forgings
BS EN 1186-1:2002 BS EN 1186-1:2002. Materials and articles in contact with foodstuffs. Plastics. Guide to the selection of conditions and test methods for overall migration
DD 254:2001 DD 254:2001. Crime reduction measures for holiday resorts and accomodation. Guidance and recommendations
BS EN 61305-5:2003 BS EN 61305-5:2003. Household high-fidelity audio equipment and systems. Methods of measuring and specifying the performance. Loudspeakers
04/30050436 DC 04/30050436 DC. BS ISO 22613. Protective clothing. General test methods and performance requirements for hand protection
BS EN 60191-6-5:2001, IEC 60191-6-5:2001 BS EN 60191-6-5:2001, IEC 60191-6-5:2001. Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface
BS EN ISO 22610:2006 BS EN ISO 22610:2006. Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment. Test method to determine the resistance to w
BS EN ISO 7291:2001 BS EN ISO 7291:2001. Gas welding equipment. Pressure regulators for manifold systems used in welding, cutting and allied processes up to 300 bar
BS EN ISO 22612:2005 BS EN ISO 22612:2005. Clothing for protection against infectious agents. Test method for resistance to dry microbial penetration
BS EN 1186-12:2002 BS EN 1186-12:2002. Materials and articles in contact with foodstuffs. Plastics. Test methods for overall migration at low temperatures
BS EN 1186-2:2002 BS EN 1186-2:2002. Materials and articles in contact with foodstuffs. Plastics. Test methods for overall migration into olive oil by total immersion
BS EN 1186-3:2002 BS EN 1186-3:2002. Materials and articles in contact with foodstuffs. Plastics. Test methods for overall migration into aqueous food simulants by total immersion
BS EN 1186-4:2002 BS EN 1186-4:2002. Materials and articles in contact with foodstuffs. Plastics. Test methods for overall migration into olive oil by cell
BS EN 1186-5:2002 BS EN 1186-5:2002. Materials and articles in contact with foodstuffs. Plastics. Test methods for overall migration into aqueous food simulants by cell
BS EN 1186-6:2002 BS EN 1186-6:2002. Materials and articles in contact with foodstuffs. Plastics. Test methods for overall migration into olive oil using a pouch
BS EN 1186-7:2002 BS EN 1186-7:2002. Materials and articles in contact with foodstuffs. Plastics. Test methods for overall migration into aqueous food simulants using a pouch
BS EN 1186-8:2002 BS EN 1186-8:2002. Materials and articles in contact with foodstuffs. Plastics. Test methods for overall migration into olive oil by article filling
BS EN 1186-9:2002 BS EN 1186-9:2002. Materials and articles in contact with foodstuffs. Plastics. Test methods for overall migration into aqueous food simulants by article filling
BS EN 12765:2001 BS EN 12765:2001. Classification of thermosetting wood adhesives for non-structural applications
BS EN 62012-1:2002 BS EN 62012-1:2002. Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments. Generic specification
BS ISO/IEC TR 15581:2001 BS ISO/IEC TR 15581:2001. Information technology. Programming languages. Fortran. Enhanced data type facilities
BS EN 4165-017:2005 BS EN 4165-017:2005. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous. Blank chimney for accessory (1 per module cavity). Prod
BS EN 204:2001 BS EN 204:2001. Classification of thermoplastic wood adhesives for non-structural applications
BS EN 4165-016:2005 BS EN 4165-016:2005. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous. Double oval chimney for accessory (1 per 2 modules). Pr
BS EN 4165-013:2005 BS EN 4165-013:2005. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous. Cable clamp 2 and 4 modules for connectors, series 2 an
BS EN 1792:2003 BS EN 1792:2003. Welding. Multilingual list of terms for welding and related processes
DD IEC PAS 62255-1:2001 DD IEC PAS 62255-1:2001. Multi-pair cables used in high bit rate digital access telecommunication networks. Outdoor Cables
ISO17643 : 2005 EDTN1 ISO17643 : 2005 EDTN1. ISO17643 : 2005 Non-destructive testing of welds - Eddy current testing of welds by complex-plane analysis
BS EN 4165-022:2005 BS EN 4165-022:2005. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous. Insertion/extraction tool for removal of modules. Produ
BS EN 4165-015:2005 BS EN 4165-015:2005. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuous. Round chimney for accessory (1 per module cavity). Pro
BS EN ISO 3071:2006 BS EN ISO 3071:2006. Textiles. Determination of pH of aqueous extract
BS EN 13397:2002 BS EN 13397:2002. Industrial valves. Diaphragm valves made of metallic materials
BS EN 4165-012:2005 BS EN 4165-012:2005. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuous. Flange mounting receptacle 2 or 4 modules, series 3. P
BS EN 4165-014:2005 BS EN 4165-014:2005. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuous. Shielded accessory body, 2 and 4 modules for connector
BS EN 13200-1:2003 BS EN 13200-1:2003. Spectator facilities. Layout criteria for spectator viewing area. Specification
BS EN 12766-2:2001, BS 2000-462.2:2001 BS EN 12766-2:2001, BS 2000-462.2:2001. Methods of test for petroleum and its products. Petroleum products and used oils. Determination of PCBs and related produ
BS EN 2591-415:2001 BS EN 2591-415:2001. Elements of electrical and optical connection. Test methods. Test probe damage (female contacts)
PD CEN/TR 14633:2003 PD CEN/TR 14633:2003. Welding. Working positions. Comparison of current international, European and US designations
BS EN 14610:2004 BS EN 14610:2004. Welding and allied processes. Definitions of metal welding processes
BS EN 2591-502:2001 BS EN 2591-502:2001. Elements of electrical and optical connection. Test methods. Restricted entry
BS EN 586-3:2001 BS EN 586-3:2001. Aluminium and aluminium alloys. Forgings. Tolerances on dimensions and form
AMD13309(TO BSISO/IEC14651 : 2001)COVERS AMD13309(TO BSISO/IEC14651 : 2001)COVERS.
BS EN 2591-503:2001 BS EN 2591-503:2001. Elements of electrical and optical connection. Test methods. Contact deformation after crimping
AMD13309(TO BSISO/IEC14651 : 2001)CD-ROM AMD13309(TO BSISO/IEC14651 : 2001)CD-ROM.
BS EN 2591-505:2001 BS EN 2591-505:2001. Elements of electrical and optical connection. Test methods. Contact protection effectiveness (scoop-proof)
WD/BSISO/IEC14651 : 2001 HEADER WD/BSISO/IEC14651 : 2001 HEADER.
BS EN 2591-506:2001 BS EN 2591-506:2001. Elements of electrical and optical connection. Test methods. Use of tools
BS ISO/IEC 14651:2001 BS ISO/IEC 14651:2001. Information technology. International string ordering and comparision. Method for comparing character strings and description of the common template tailor
WD/BSISO/IEC14651 : 2001 CD-ROM WD/BSISO/IEC14651 : 2001 CD-ROM.
BS EN 2591-416:2001 BS EN 2591-416:2001. Elements of electrical and optical connection. Test methods. Contact bending strength
BS EN 50375:2002 BS EN 50375:2002. Testing methodology for wipers used in electrical insulating oil
BS EN 2591-417:2001 BS EN 2591-417:2001. Elements of electrical and optical connection. Test methods. Tensile strength (crimped connection)
BS EN 2591-418:2001 BS EN 2591-418:2001. Elements of electrical and optical connection. Test methods. Gauge insertion/extraction forces (female contacts)
BS EN 2591-419:2001 BS EN 2591-419:2001. Elements of electrical and optical connection. Test methods. Stability of male contacts in insert
BS EN 2591-420:2001 BS EN 2591-420:2001. Elements of electrical and optical connection. Test methods. Mechanical strength of rear accessories
BS EN 2591-424:2001 BS EN 2591-424:2001. Elements of electrical and optical connection. Test methods. Stripping force, solderless wrapped connections
BS EN 2591-425:2001 BS EN 2591-425:2001. Elements of electrical and optical connection. Test methods. Unwrapping capability, solderless wrapped connections
BS EN 13274-4:2001 BS EN 13274-4:2001. Respiratory protective devices. Methods of test. Flame tests
BS EN 2591-426:2001 BS EN 2591-426:2001. Elements of electrical and optical connection. Test methods. Contact retention system effectiveness
BS EN 61334-5-1:2001, IEC 61334-5-1:2001 BS EN 61334-5-1:2001, IEC 61334-5-1:2001. Distribution automation using distribution line carrier systems. Lower layer profiles. The spread frequency shift key
BS EN 2591-427:2001 BS EN 2591-427:2001. Elements of electrical and optical connection. Test methods. Robustness of protective cover attachment
BS EN 2591-701:2001 BS EN 2591-701:2001. Elements of electrical and optical connection. Test methods. Electrical elements. Measurement of open circuit impedance of couplers
BS EN 2591-702:2001 BS EN 2591-702:2001. Elements of electrical and optical connection. Test methods. Electrical elements. Measurement of signal distortion of couplers
BS EN 2591-703:2001 BS EN 2591-703:2001. Elements of electrical and optical connection. Test methods. Electrical elements. Common mode rejection of couplers
BS EN 2591-704:2001 BS EN 2591-704:2001. Elements of electrical and optical connection. Test methods. Electrical elements. Measurement of turns ratio on a transformer used in a coupler
BS EN 2591-705:2001 BS EN 2591-705:2001. Elements of electrical and optical connection. Test methods. Electrical elements. Measurement of stub input impedance of couplers
BS EN 2591-706:2001 BS EN 2591-706:2001. Elements of electrical and optical connection. Test methods. Electrical elements. Transmission test
BS EN 2591-708:2001 BS EN 2591-708:2001. Elements of electrical and optical connection. Test methods. Electrical elements. Measurement of surface transfer impedance of couplers
BS EN 2591-709:2001 BS EN 2591-709:2001. Elements of electrical and optical connection. Test methods. Electrical elements. Tensile strength of couplers
BS EN 2591-7301:2001 BS EN 2591-7301:2001. Elements of electrical and optical connection. Test methods. Electrical elements. Temperature endurance of couplers
BS EN ISO 16136:2006 BS EN ISO 16136:2006. Industrial valves. Butterfly valves of thermoplastic materials
BS EN ISO 16137:2006 BS EN ISO 16137:2006. Industrial valves. Check valves of thermoplastic materials
BS EN ISO 16138:2006 BS EN ISO 16138:2006. Industrial valves. Diaphragm valves of thermoplastics materials
BS EN ISO 21787:2006 BS EN ISO 21787:2006. Industrial valves. Globe valves of thermoplastics materials
BS EN 12474:2001 BS EN 12474:2001. Cathodic protection for submarine pipelines
BS EN 12447:2001 BS EN 12447:2001. Geotextiles and geotextile-related products. Screening test method for determining the resistance to hydrolysis in water
BS EN 60601-2-45:2001, BS 5724-2.45:2001,IEC 60601-2-45:2001 BS EN 60601-2-45:2001, BS 5724-2.45:2001,IEC 60601-2-45:2001. Medical electrical equipment. Particular requirements for safety. Particular
BS EN 1375:2002 BS EN 1375:2002. Identification card system. Intersector integrated circuit(s) card additional formats. ID-000 card size and physical characteristics
BS EN 61663-2:2001, IEC 61663-2:2001 BS EN 61663-2:2001, IEC 61663-2:2001. Lightning protection. Telecommunication lines. Lines using metallic conductors
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
