BIS Standards Catalogue
BS ISO 3616:2001 BS ISO 3616:2001. Textile glass. Chopped-strand and continuous-filament mats. Determination of average thickness, thickness under load and recovery after compression
BS EN ISO 6721-1:2002 BS EN ISO 6721-1:2002. Plastics. Determination of dynamic mechanical properties. General principles
BS EN 14527:2006 BS EN 14527:2006. Shower trays for domestic purposes
BS EN 14516:2006 BS EN 14516:2006. Baths for domestic purposes
BS EN ISO 1182:2002 BS EN ISO 1182:2002. Reaction to fire tests for building products. Non-combustibility test
BS EN ISO 9509:2006 BS EN ISO 9509:2006. Water quality. Toxicity test for assessing the inhibition of nitrification of activated sludge microorganisms
BS EN ISO 10253:2006 BS EN ISO 10253:2006. Water quality. Marine algal growth inhibition test with Skeletonema costatum and Phaeodactylum tricornutum
BS ISO 5667-6:2005 BS ISO 5667-6:2005. Water quality. Sampling. Guidance on sampling of rivers and streams
DD CEN/TS 13130-9:2005 DD CEN/TS 13130-9:2005. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of acetic acid, vinyl ester in food simulants
BS ISO/IEC 19501:2005 BS ISO/IEC 19501:2005. Information technology. Open distributed processing. Unified modeling language (UML). Version 1.4.2
DD CEN/TS 13130-10:2005 DD CEN/TS 13130-10:2005. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of acrylamide in food simulants
BS EN 50365:2002 BS EN 50365:2002. Electrically insulating helmets for use on low voltage installations
BS EN 50289-4-11:2002 BS EN 50289-4-11:2002. Communication cables. Specifications for test methods. Environmental test methods. A horizontal integrated fire test method
DD CEN/TS 13130-11:2005 DD CEN/TS 13130-11:2005. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of 11-aminoundecanoic acid in food simulant
DD CEN/TS 13130-12:2005 DD CEN/TS 13130-12:2005. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of 1,3-benzenedimethaneamine in food simula
DD CEN/TS 13130-13:2005 DD CEN/TS 13130-13:2005. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of 2,2-bis(4-hydroxyphenyl)propane (Bisphen
BS ISO/IEC 14769:2001 BS ISO/IEC 14769:2001. Information technology. Open distributed processing. Type repository function
BS 6396:2002 BS 6396:2002. Electrical systems in office furniture and office screens. Specification
DD CEN/TS 13130-14:2005 DD CEN/TS 13130-14:2005. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of 3,3-bis(3-methyl-4-hydroxyphenyl)2-indol
BS EN 13209-2:2005 BS EN 13209-2:2005. Child use and care articles. Baby carriers. Safety requirements and test methods. Soft carrier
PD ISO/TR 10949:2002 PD ISO/TR 10949:2002. Hydraulic fluid power. Component cleanliness. Guidelines for achieving and controlling cleanliness of components from manufacture to installation
DD CEN/TS 13130-15:2005 DD CEN/TS 13130-15:2005. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of 1,3-butadiene in food simulants
DD CEN/TS 13130-16:2005 DD CEN/TS 13130-16:2005. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of caprolactam and caprolactam salt in food
DD CEN/TS 13130-17:2005 DD CEN/TS 13130-17:2005. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of carbonyl chloride in plastics
DD CEN/TS 13130-19:2005 DD CEN/TS 13130-19:2005. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of dimethylaminoethanol in food simulants
DD CEN/TS 13130-20:2005 DD CEN/TS 13130-20:2005. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of epichlorohydrin in plastics
DD CEN/TS 13130-18:2005 DD CEN/TS 13130-18:2005. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of 1,2-dihydroxybenzene, 1,3-dihydroxybenze
DD CEN/TS 13130-22:2005 DD CEN/TS 13130-22:2005. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of ethylene oxide and propylene oxide in pl
DD CEN/TS 13130-21:2005 DD CEN/TS 13130-21:2005. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of ethylenediamine and hexamethylenediamine
DD CEN/TS 13130-24:2005 DD CEN/TS 13130-24:2005. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of maleic acid and maleic anhydride in food
DD CEN/TS 13130-23:2005 DD CEN/TS 13130-23:2005. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of formaldehyde and hexamethylenetetramine
DD CEN/TS 13130-25:2005 DD CEN/TS 13130-25:2005. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of 4-methyl-1-pentene in food simulants
DD CEN/TS 13130-26:2005 DD CEN/TS 13130-26:2005. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of 1-octene and tetrahydrofuran in food sim
DD CEN/TS 13130-28:2005 DD CEN/TS 13130-28:2005. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of 1,1,1-trimethylopropane in food simulant
DD CEN/TS 13130-27:2005 DD CEN/TS 13130-27:2005. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of 2,4,6-triamino-1,3,5-triazine in food si
BS EN 14058:2004 BS EN 14058:2004. Protective clothing. Garments for protection against cool environments
BS EN 340:2003 BS EN 340:2003. Protective clothing. General requirements
ISO4735 : 2002 EDTN 2 ISO4735 : 2002 EDTN 2. ISO4735 : 2002 Oil of citrus- Determination of CD value by ultraviolet spectrometric analysis
BS EN 60191-6-3:2001, IEC 60191-6-3:2001 BS EN 60191-6-3:2001, IEC 60191-6-3:2001. Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface
BS ISO 2846-2:2000 BS ISO 2846-2:2000. Graphic technology. Colour and transparency of ink sets for four-colour-printing. Coldset offset lithographic printing
BS ISO 4703:2001 BS ISO 4703:2001. Test conditions for surface grinding machines with two columns. Machines for grinding slideways. Testing of the accuracy
BS 7870-8.1:2003 BS 7870-8.1:2003. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore and multipair cables for installation above and be
BS 7870-8.2:2003 BS 7870-8.2:2003. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore and multipair cables for installation above and be
BS 7870-8.3:2003 BS 7870-8.3:2003. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore and multipair cables for installation above and be
BS 7870-8.4:2003 BS 7870-8.4:2003. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore and multipair cables for installation above and be
BS EN 14073-3:2004 BS EN 14073-3:2004. Office furniture. Storage furniture. Test methods for the determination of stability and strength of the structure
BS 7870-8.5:2003 BS 7870-8.5:2003. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore and multipair cables for installation above and be
BS EN 14072:2003 BS EN 14072:2003. Glass in furniture. Test methods
BS EN 14074:2004 BS EN 14074:2004. Office furniture. Tables and desks and storage furniture. Test methods for the determination of strength and durability of moving parts
BS 7870-8.6:2003 BS 7870-8.6:2003. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore and multipair cables for installation above and be
DD ENV 13710:2001 DD ENV 13710:2001. European Ordering Rules. Ordering of characters from the Latin, Greek and Cyrillic scripts
PD ISO/TR 14672:2001 PD ISO/TR 14672:2001. Graphic technology. Statistics of the natural SCID images defined in ISO 12640
BS EN 60669-2-4:2005 BS EN 60669-2-4:2005. Switches for household and similar fixed electrical installations. Particular requirements. Isolating switches
BS EN 408:2003 BS EN 408:2003. Timber structures. Structural timber and glued laminated timber. Determination of some physical and mechanical properties
BS EN 14076:2004 BS EN 14076:2004. Timber stairs. Terminology
PD IEC 61394:1997 PD IEC 61394:1997. Overhead lines. Characteristics of greases for aluminium, aluminium alloy and steel bare conductors
BS EN 60870-6-503:2002, IEC 60870-6-503:2002 BS EN 60870-6-503:2002, IEC 60870-6-503:2002. Telecontrol equipment and systems. Telecontrol protocols compatible with ISO standards and ITU-T recommendati
BS EN 13991:2003 BS EN 13991:2003. Derivatives from coal pyrolysis. Coal tar based oils. Creosotes. Specifications and test methods
BS 6850:2002 BS 6850:2002. Gas powered ventilatory resuscitators
BS EN 14068:2003 BS EN 14068:2003. Products and systems for the protection and repair of concrete structures. Test methods. Determination of watertightness of injected cracks without movement in concr
BS EN 12637-3:2003 BS EN 12637-3:2003. Products and systems for the protection and repair of concrete structures. Test methods. Compatibility of injection products. Effect of injection products on ela
ISO19840 : 2004 EDTN1 ISO19840 : 2004 EDTN1. ISO19840 : 2004 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Measurement of, and acceptance criteria for,
BS EN 60601-1:2006 BS EN 60601-1:2006. Medical electrical equipment. General requirements for basic safety and essential performance
BS EN 12839:2001 BS EN 12839:2001. Precast concrete products. Elements for fences
BS EN 61291-5-2:2002 BS EN 61291-5-2:2002. Optical fibre amplifiers. Qualification specifications. Reliability qualification for optical fibre amplifiers
BS EN 14798:2005 BS EN 14798:2005. Glass packaging. Hand-held crown bottle openers. Dimensions
BS ISO 2421:2003 BS ISO 2421:2003. Coated abrasives. Cylindrical sleeves
BS EN 12502-5:2004 BS EN 12502-5:2004. Protection of metallic materials against corrosion. Guidance on the assessment of corrosion likelihood in water distribution and storage systems. Influencing fac
BS EN 1757-1:2001 BS EN 1757-1:2001. Safety of industrial trucks. Pedestrian propelled trucks. Stacker trucks
BS EN 1757-2:2001 BS EN 1757-2:2001. Safety of industrial trucks. Pedestrian propelled trucks. Pallet trucks
BS IEC 61584:2001 BS IEC 61584:2001. Radiation protection instrumentation. Installed, portable or transportable assemblies. Measurement of air kerma direction and air kerma rate
BS EN ISO 15367-2:2005 BS EN ISO 15367-2:2005. Lasers and laser-related equipment. Test methods for determination of the shape of a laser beam wavefront. Shack-Hartmann sensors
BS EN 13368-2:2001 BS EN 13368-2:2001. Fertilizers. Determination of chelating agents in fertilizers by ion chromatography. EDDHA and EDDHMA
DD ENV 12977-1:2001 DD ENV 12977-1:2001. Thermal solar systems and components. Custom built systems. General requirements
DD ENV 12977-3:2001 DD ENV 12977-3:2001. Thermal solar systems and components. Custom built systems. Performance characterisation of stores for solar heating systems
BS EN 61076-6:2004 BS EN 61076-6:2004. Connectors for electronic equipment. Loose part contacts. Sectional specification
DD ENV 12977-2:2001 DD ENV 12977-2:2001. Thermal solar systems and components. Custom built systems. Test methods
BS EN 2344:2001 BS EN 2344:2001. Aerospace series. Round bars, machined in heat resisting alloys. Diameter 10 mm < D < 180 mm. Dimensions
BS EN 13111:2001 BS EN 13111:2001. Flexible sheets for waterproofing. Underlays for discontinuous roofing and walls. Determination of resistance to water penetration
BS EN 61788-6:2001 BS EN 61788-6:2001. Superconductivity. Mechanical properties measurement. Room temperature tensile test of Cu/Nb-Ti composite superconductors
BS EN 3882:2001 BS EN 3882:2001. Aerospace series. Heat resisting alloy NI-WH1801 (NiCr20Co18Ti3Al2). Filler wire for welding
BS EN 3883:2001 BS EN 3883:2001. Aerospace series. Heat resisting alloy NI-WH2301 (NiCr22Fe19Mo9Co2). Filler metal for welding
BS EN 13416:2001 BS EN 13416:2001. Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Rules for sampling
BS EN 3884:2001 BS EN 3884:2001. Aerospace series. Heat resisting alloy NI-WH2601 (NiCr19Nb5Mo3Ti). Filler metal for welding
BS EN 3885:2001 BS EN 3885:2001. Aerospace series. Heat resisting alloy NI-WH3601 (NiCr22Mo9Nb4). Filler metal for welding
BS EN 3146:2001 BS EN 3146:2001. Aerospace series. Round bars, hot rolled in steel. Close tolerances. Diameter 6mm ≤ D ≤ 250mm. Dimensions
BS EN 3842:2001 BS EN 3842:2001. Aerospace series. Circular tubes for fluids in corrosion resistant steel. Diameter 3,2 mm ≤ D ≤ 100 mm. Thickness 0,32 mm ≤ a ≤ 2,5 mm. Dimensions
BS EN 3961:2001 BS EN 3961:2001. Aerospace series. Gold base alloy AU-B4000. Filler metal for brazing. Rolled foil
BS EN 55011:2007 BS EN 55011:2007. Industrial, scientific and medical (ISM) radio-frequency Equipment. Electromagnetic disturbance characteristics. Limits and methods of measurement
BS EN 3962:2001 BS EN 3962:2001. Aerospace series. Gold base alloy AU-B40001. Filler metal for brazing. Wire
BS EN 13031-1:2001 BS EN 13031-1:2001. Greenhouses. Design and construction. Commercial production greenhouses
BS EN 3963:2001 BS EN 3963:2001. Aerospace series. Copper CU-BU9001. Filler metal for brazing. Rolled foil
BS EN 3964:2001 BS EN 3964:2001. Aerospace series. Copper CU-BU9001. Filler metal for brazing. Wire
BS EN 3965:2001 BS EN 3965:2001. Aerospace series. Titanium alloy TI-B17001. Filler metal for brazing. Rolled foil
BS EN 14080:2005 BS EN 14080:2005. Timber structures. Glued laminated timber. Requirements
BS EN 14081-1:2005 BS EN 14081-1:2005. Timber structures. Strength graded structural timber with rectangular cross section. General requirements
BS EN 4045:2001 BS EN 4045:2001. Aerospace series. Capillary tubes, seamless in heat resisting alloys. Diameter 0,6 mm ≤ D ≤ 2 mm. Dimensions
BS EN 14081-2:2005 BS EN 14081-2:2005. Timber structures. Strength graded structural timber with rectangular cross section. Machine grading. Additional requirements for initial type testing
BS EN 4104:2001 BS EN 4104:2001. Aerospace series. Nickel base alloy NI-B40002. Filler metal for brazing. Powder or paste.
BS EN 4267:2001 BS EN 4267:2001. Aerospace series. Round bar in titanium and titanium alloys. Diameter 6 mm ≤ D ≤ 160 mm. Dimensions
BS EN 3506:2001 BS EN 3506:2001. Aerospace series. Hot rolled sheets and plates in heat resisting alloys. Thickness 2,0 mm ≤ a ≤ 100 mm. Dimensions
BS EN 14081-3:2005 BS EN 14081-3:2005. Timber structures. Strength graded structural timber with rectangular cross section. Machine grading. Additional requirements for factory production control
BS 7413:2002 BS 7413:2002. Unplasticized polyvinyl chloride (PVC-U) profiles for windows and doors. Specification
BS EN 62246-1:2002 BS EN 62246-1:2002. Reed contacts unit. Generic specification
BS EN 60684-3-400 to 402:2002 BS EN 60684-3-400 to 402:2002. Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Glass textile sleeving with si
BS ISO 8419:2003 BS ISO 8419:2003. Belt drives. Narrow V-belts. Sections 9N/J, 15N/J and 25N/J (lengths in the effective system)
BS EN 61334-6:2001, IEC 61334-6:2000 BS EN 61334-6:2001, IEC 61334-6:2000. Distribution automation using distribution line carrier systems. A-XDR encoding rule
BS ISO 18901:2002 BS ISO 18901:2002. Imaging materials. Processed silver-gelatin type black-and-white film. Specifications for stability
BS ISO 17410:2001 BS ISO 17410:2001. Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of psychrotrophic micro-organisms
BS ISO 11807-2:2001 BS ISO 11807-2:2001. Integrated optics. Vocabulary. Terms used in classification
BS ISO 11807-1:2001 BS ISO 11807-1:2001. Integrated optics. Vocabulary. Basic terms and symbols
DD ENV 14029:2001 DD ENV 14029:2001. Lead and lead alloys. Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), after separation of the
DD ENV 1591-2:2001 DD ENV 1591-2:2001. Flanges and their joints. Design rules for gasketed circular flange connections. Gasket parameters
BS EN 13290-2:2001 BS EN 13290-2:2001. Space project management. General requirements. Project breakdown structure
BS EN 13290-4:2001 BS EN 13290-4:2001. Space project management. General requirements. Project phasing and planning
BS EN 13290-5:2001 BS EN 13290-5:2001. Space project management. General requirements. Configuration management
BS EN 13290-6:2001 BS EN 13290-6:2001. Space project management. General requirements. Information/documentation management
BS EN 13290-7:2001 BS EN 13290-7:2001. Space project management. General requirements. Cost and schedule management
BS EN ISO 12567-2:2005 BS EN ISO 12567-2:2005. Thermal performance of windows and doors. Determination of thermal transmittance by hot box method. Roof windows and other projecting windows
BS EN 13923:2005 BS EN 13923:2005. Filament-wound FRP pressure vessels. Materials, design, manufacturing and testing
BS ISO 17288-2:2004 BS ISO 17288-2:2004. Passenger cars. Free-steer behaviour. Steering-pulse open-loop test method
BS EN 60743:2001 BS EN 60743:2001. Live working. Terminology for tools, equipment and devices
BS EN ISO 14729:2001, BS 7208-26:2001 BS EN ISO 14729:2001, BS 7208-26:2001. Ophthalmic optics. Contact lens care products. Microbiological requirements and test methods for products and regimens for
BS EN 62056-21:2002 BS EN 62056-21:2002. Electricity metering. Data exchange for meter reading, tariff and load control. Direct local data exchange
BS EN 62056-62:2002 BS EN 62056-62:2002. Electricity metering. Data exchange for meter reading, tariff and load control. Interface classes
BS EN 13125:2001 BS EN 13125:2001. Shutters and blinds. Additional thermal resistance. Allocation of a class of air permeability to a product
BS EN 60601-2-5:2001 BS EN 60601-2-5:2001. Medical electrical equipment. Particular requirements for safety. Particular requirements for the safety of ultrasonic physiotherapy equipment
BS EN 62056-53:2002 BS EN 62056-53:2002. Electricity metering. Data exchange for meter reading, tariff and load control. COSEM application layer
BS EN 62056-61:2002, IEC 62056-61:2002 BS EN 62056-61:2002, IEC 62056-61:2002. Electricity metering. Data exchange for meter reading, tariff and load control. Object identification system (OBIS)
BS ISO 21528-1:2004 BS ISO 21528-1:2004. Microbiology of food and animal feeding stuffs. Horizontal methods for the detection and enumeration of Enterobacteriaceae. Detection and enumeration by MPN te
BS EN 62056-42:2002, IEC 62056-42:2002 BS EN 62056-42:2002, IEC 62056-42:2002. Electricity metering. Data exchange for meter reading, tariff and load control. Physical layer services and procedures fo
BS ISO 128-30:2001 BS ISO 128-30:2001. Technical drawings. General principles of presentation. Basic conventions for views
BS ISO 21528-2:2004 BS ISO 21528-2:2004. Microbiology of food and animal feeding stuffs. Horizontal methods for the detection and enumeration of Enterobacteriaceae. Colony-count method
BS EN 13051:2001 BS EN 13051:2001. Curtain walling. Watertightness. Site test
BS EN 12833:2001 BS EN 12833:2001. Skylight and conservatory roller shutters. Resistance to snow load. Test method
BS ISO 11271:2002, BS 7755-3.14:2002 BS ISO 11271:2002, BS 7755-3.14:2002. Soil quality. Determination of redox potential. Field method
BS ISO 14135-1:2003 BS ISO 14135-1:2003. Optics and optical instruments. Specification for telescopic sights. General-purpose instruments
BS ISO 14135-2:2003 BS ISO 14135-2:2003. Optics and optical instruments. Specification for telescopic sights. High-performance instruments
PD IEC TR 62221:2001 PD IEC TR 62221:2001. Optical fibres. Measurement methods. Microbending sensitivity
BS EN 60793-2-10:2002 BS EN 60793-2-10:2002. Optical fibres. Product specifications. Sectional specification for category A1 multimode fibres
BS EN 60793-2-20:2002 BS EN 60793-2-20:2002. Optical fibres. Product specifications. Sectional specification for category A2 multimode fibres
BS EN 60793-2-30:2002 BS EN 60793-2-30:2002. Optical fibres. Product specifications. Sectional specification for category A3 multimode fibres
BS EN 60793-2-40:2002 BS EN 60793-2-40:2002. Optical fibres. Product specifications. Sectional specification for category A4 multimode fibres
BS EN 60793-2-50:2002 BS EN 60793-2-50:2002. Optical fibres. Product specifications. Sectional specification for class B single-mode fibres
BS6399-2 : 1997 BS6399-2 : 1997 . BS6399-2 : 1997 Loading for buildings. Part 2: Code of practice for wind loads
BS ISO 14490-3:2004 BS ISO 14490-3:2004. Optics and optical instruments. Test methods for telescopic systems. Test methods for telescopic sights
BS EN 61300-3-30:2003 BS EN 61300-3-30:2003. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Polish angle and fibre po
BS EN 61754-4-1:2003 BS EN 61754-4-1:2003. Fibre optic connector interfaces. Type SC connector family. Simplified receptacle SC-PC connector interfaces
BS EN 61754-6-1:2003 BS EN 61754-6-1:2003. Fibre optic connector interfaces. Type MU connector family. Simplified receptacle MU-PC connector interfaces
BS ISO/IEC 18033-1:2005 BS ISO/IEC 18033-1:2005. Information technology. Security techniques. Encryption algorithms. General
BS ISO/IEC 18033-2:2006 BS ISO/IEC 18033-2:2006. Information technology. Security techniques. Encryption algorithms. Asymmetric ciphers
BS ISO 9276-2:2001 BS ISO 9276-2:2001. Representation of results of particle size analysis. Calculation of average particle sizes/diameters and moments from particle size distributions
BS ISO/IEC 18031:2005 BS ISO/IEC 18031:2005. Information technology. Security techniques. Random bit generation
BS ISO/IEC 18032:2005 BS ISO/IEC 18032:2005. Information technology. Security techniques. Prime number generation
BS ISO/IEC 18028-1:2006 BS ISO/IEC 18028-1:2006. Information technology. Security techniques. IT network security. Network security management
BS ISO/IEC 18014-1:2002 BS ISO/IEC 18014-1:2002. Information technology. Security techniques. Time-stamping services. Framework
BS ISO/IEC 18014-2:2002 BS ISO/IEC 18014-2:2002. Information technology. Security techniques. Time-stamping services. Mechanisms producing independent tokens
BS ISO/IEC 18014-3:2004 BS ISO/IEC 18014-3:2004. Information technology. Security techniques. Time-stamping services. Mechanisms producing linked tokens
PD ISO/IEC TR 15443-2:2005 PD ISO/IEC TR 15443-2:2005. Information technology. Security techniques. A framework for IT security assurance. Assurance methods
BS ISO/IEC 7064:2003 BS ISO/IEC 7064:2003. Information technology. Security techniques. Check character systems
BS EN ISO/IEC 13818-9:2001 BS EN ISO/IEC 13818-9:2001. Information technology. Generic coding of moving pictures and associated audio information. Extension for real time interface for systems decoder
BS 146:2002 BS 146:2002. Specification for blastfurnace cements with strength properties outside the scope of BS EN 197-1
BS EN ISO 19901-4:2003 BS EN ISO 19901-4:2003. Petroleum and natural gas industries. Specific requirements for offshore structures. Geotechnical and foundation design considerations
BS ISO 6954:2000 BS ISO 6954:2000. Mechanical vibration. Guidelines for the measurement, reporting and evaluation of vibration with regard to habitability on passenger and merchant ships
BS EN 13507:2001 BS EN 13507:2001. Thermal spraying. Pre-treatment of surfaces of metallic parts and components for thermal spraying
DD ENV 1852-2:2001 DD ENV 1852-2:2001. Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP). Guidance for the assessment of conformity
DD ENV 1401-2:2001 DD ENV 1401-2:2001. Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinylchloride) (PVC-U). Guidance for assessment of conformity
BS IEC TR 62157:2001 BS IEC TR 62157:2001. Cylindrical machined carbon electrodes. Nominal dimensions
BS EN 80:2001 BS EN 80:2001. Wall-hung urinals. Connecting dimensions
DD IEC TS 61334-5-4:2001 DD IEC TS 61334-5-4:2001. Distribution automation using distribution line carrier systems. Lower layer profiles. Multi-carrier modulation (MCM) profile
BS EN 61970-301:2004 BS EN 61970-301:2004. Energy management system application program interface (EMS-API). Common information model (CIM) Base
BS EN 61850-4:2002, IEC 61850-4:2002 BS EN 61850-4:2002, IEC 61850-4:2002. Communication networks and systems in substations. System and project management
BS EN 61850-3:2002, IEC 61850-3:2002 BS EN 61850-3:2002, IEC 61850-3:2002. Communication networks and systems in substations. General requirements
DD IEC TS 60870-6-602:2001 DD IEC TS 60870-6-602:2001. Telecontrol equipment and systems. Telecontrol protocols compatible with ISO standards and ITU-T recommendations. TASE transport profiles
BS EN 60086-5:2001 BS EN 60086-5:2001. Primary batteries. Safety of batteries with aqueous electrolyte
BS EN 61834-6:2001, IEC 61834-6:2000 BS EN 61834-6:2001, IEC 61834-6:2000. Recording. Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50,
BS EN 12618-1:2003 BS EN 12618-1:2003. Products and systems for the protection and repair of concrete structures. Test methods. Adhesion and elongation capacity of injection products with limited duct
BS EN 984:2001 BS EN 984:2001. Textile floor coverings. Determination of the mass per unit area of the use surface of needled floor coverings
BS 8219:2001 BS 8219:2001. Installation of sheet roof and wall coverings. Profiled fibre cement. Code of practice
DD IEC TS 61334-5-5:2001 DD IEC TS 61334-5-5:2001. Distribution automation using distribution line carrier systems. Lower layer profiles. Spread spectrum-fast frequency hopping (SS-FFH) profile
BS EN 60695-2-10:2001, IEC 60695-2-10:2000 BS EN 60695-2-10:2001, IEC 60695-2-10:2000. Fire hazard testing. Test methods. Glowing/hot-wire based test methods. Glow-wire apparatus and common test proce
BS EN 60695-2-11:2001, IEC 60695-2-11:2001 BS EN 60695-2-11:2001, IEC 60695-2-11:2001. Fire hazard testing. Test methods. Glowing/hot-wire based test methods. Glow-wire flammability test method for en
BS EN 60695-2-12:2001, IEC 60695-2-12:2000 BS EN 60695-2-12:2001, IEC 60695-2-12:2000. Fire hazard testing. Test methods. Glowing/hot-wire based test methods. Glow-wire flammability test method for ma
BS EN 60695-2-13:2001, IEC 60695-2-13:2000 BS EN 60695-2-13:2001, IEC 60695-2-13:2000. Fire hazard testing. Test methods. Glowing/hot-wire based tests methods. Glow-wire ignitability test method for m
ISO9050 : 2003 EDTN.2 ISO9050 : 2003 EDTN.2. ISO9050 : 2003 Glass in building - Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmit
BS EN 62271-203:2004 BS EN 62271-203:2004. High-voltage switchgear and controlgear. Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV
BS EN ISO 10052:2004 BS EN ISO 10052:2004. Acoustics. Field measurements of airborne and impact sound insulation and of service equipment sound. Survey method
BS EN 4233:2001 BS EN 4233:2001. Aerospace series. Pipe coupling 8°30' in titanium alloy. Unions, welded, threaded
BS 4723:2002 BS 4723:2002. Stretch covers for upholstered furniture. Specification
BS ISO 4512:2000 BS ISO 4512:2000. Petroleum and liquid petroleum products. Equipment for measurement of liquid levels in storage tanks. Manual methods
WD/ISO2107 : 2004 EDTN2 WD/ISO2107 : 2004 EDTN2. ISO2107 : 2004 Aluminium and aluminium alloys -- Wrought products -- Temper designations
BS 2000-138:2000 BS 2000-138:2000. Methods of test for petroleum and its products. Determination of oxidation stability of aviation fuel. Potential residue method
BS 2000-306:1994 BS 2000-306:1994. Methods of test for petroleum and its products. Determination of oxidation stability of straight mineral oil
BS EN 61300-3-5:2001, IEC 61300-3-5:2000 BS EN 61300-3-5:2001, IEC 61300-3-5:2000. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and m
BS 2000-146:2000 BS 2000-146:2000. Methods of test for petroleum and its products. Determination of foaming characteristics of lubricating oils
BS EN 60191-6-6:2001, IEC 60191-6-6:2001 BS EN 60191-6-6:2001, IEC 60191-6-6:2001. Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface
BS EN 13123-1:2001 BS EN 13123-1:2001. Windows, doors and shutters. Explosion resistance. Requirements and classification. Shock tube
BS EN 13124-1:2001 BS EN 13124-1:2001. Windows, doors and shutters. Explosion resistance. Test method. Shock tube
BS 1000:Aux 1e [71+73]:2001 BS 1000:Aux 1e [71+73]:2001. Universal Decimal Classification. English full edition. Auxiliary table 1e [71+73]. Common auxiliaries of place for Canada and the United State
BS 2000-272:2000 BS 2000-272:2000. Methods of test for petroleum and its products. Determination of mercaptan sulfur and hydrogen sulfide content of liquefied petroleum gases (LPG). Electrometric titr
BS EN ISO 11252:2004 BS EN ISO 11252:2004. Lasers and laser-related equipment. Laser device. Minimum requirements for documentation
BS EN ISO 10692-2:2001 BS EN ISO 10692-2:2001. Gas cylinders. Gas cylinder valve connections for use in the microelectronics industry. Specification and type testing for valve to cylinder connections
PD 7974-0:2002 PD 7974-0:2002. Application of fire safety engineering principles to the design of buildings. Guide to design framework and fire safety engineering procedures
PD 7974-1:2003 PD 7974-1:2003. Application of fire safety engineering principles to the design of buildings. Initiation and development of fire within the enclosure of origin (Sub-system 1)
PD 7974-2:2002 PD 7974-2:2002. Application of fire safety engineering principles to the design of buildings. Spread of smoke and toxic gases within and beyond the enclosure of origin (Sub-system 2)
PD 7974-3:2003 PD 7974-3:2003. Application of fire safety engineering principles to the design of buildings. Structural response and fire spread beyond the enclosure of origin (Sub-system 3)
ISO22991 : 2004 EDTN.1 ISO22991 : 2004 EDTN.1. ISO22991 : 2004 Gas cylinders - Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) - Design and construction
PD 7974-5:2002 PD 7974-5:2002. Application of fire safety engineering principles to the design of buildings. Fire service intervention. (Sub-system 5)
PD 7974-6:2004 PD 7974-6:2004. The application of fire safety engineering priciples to fire safety design of buildings. Human factors. Life safety strategies. Occupant evacuation, behaviour and condit
PD 7974-7:2003 PD 7974-7:2003. Application of fire safety engineering principles to the design of buildings. Probabilistic risk assessment
BS EN 61937:2001 BS EN 61937:2001. Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958
BS 5660-2:2001, ISO 3082:2000 BS 5660-2:2001, ISO 3082:2000. Methods of sampling iron ores. Sampling and sample preparation procedures
BS ISO 16067-1:2003 BS ISO 16067-1:2003. Photography. Spatial resolution measurements for electronic scanners for photographic images. Scanners for reflective media
BS ISO/IEC 14515-1:2000 BS ISO/IEC 14515-1:2000. Information technology. Portable Operating Systems Interface (POSIX). Test methods for measuring conformance to POSIX. System interfaces
BS EN 559:2003 BS EN 559:2003. Gas welding equipment. Rubber hoses for welding, cutting and allied processes
BS EN 562:2003 BS EN 562:2003. Gas welding equipment. Pressure gauges used in welding, cutting and allied processes
BS EN 561:2002 BS EN 561:2002. Gas welding equipment. Quick-action coupling with shut-off valves for welding, cutting and allied processes
BS 1858:2002 BS 1858:2002. Electric cables. Accessories. Bitumen-based filling compounds
BS ISO 14975:2000 BS ISO 14975:2000. Surface chemical analysis. Information formats
BS ISO 3116:2001 BS ISO 3116:2001. Magnesium and magnesium alloys. Wrought magnesium alloys
DD ENV 13936:2001 DD ENV 13936:2001. Workplace atmospheres. Measurement of chemical agents present as mixtures of airborne particles and vapour. Requirements and test methods
ISO/IEC9594-8 : 2001 EDTN 4 ISO/IEC9594-8 : 2001 EDTN 4. ISO/IEC9594-8 : 2001 Information technology -- Open Systems Interconnection -- The Directory: Authentication framework
BS EN 60601-2-4:2003 BS EN 60601-2-4:2003. Medical electrical equipment. Particular requirements for safety. Particular requirements for the safety of cardiac defibrillators
BS AU 50-3.1c:2001, ISO 9413:1998 BS AU 50-3.1c:2001, ISO 9413:1998. Tyres and wheels. Valves. Tyre valves. Dimensions and designation
ISO15745-2 : 2003 EDTN 1 ISO15745-2 : 2003 EDTN 1. ISO15745-2 : 2003 Industrial automation systems and integration - Open systems application integration frameworks - . Part 2: Reference description f
ISO15745-3 : 2003 EDTN 1 ISO15745-3 : 2003 EDTN 1. ISO15745-3 : 2003 Industrial automation systems and integration - Open systems application integration frameworks - . Part 3: Reference description f
ISO15745-4 : 2003 EDTN 1 ISO15745-4 : 2003 EDTN 1. ISO15745-4 : 2003 Industrial automation systems and integration - Open systems application integration frameworks - . Part 4: Reference description f
BS EN 62052-11:2003 BS EN 62052-11:2003. Electricity metering equipment (AC). General requirements, tests and test conditions. Metering equipment
BS ISO 18929:2003 BS ISO 18929:2003. Imaging materials. Wet-processed silver-gelatin type black-and-white photographic reflection prints. Specifications for dark storage
BS EN 61334-4-511:2001, IEC 61334-4-511:2000 BS EN 61334-4-511:2001, IEC 61334-4-511:2000. Distribution automation using distribution line carrier systems. Data communication protocols. Systems manage
BS EN 60999-2:2003 BS EN 60999-2:2003. Connecting devices. Electrical copper conductors. Safety requirements for screw-type and screwless-type clamping units. Particular requirements for clamping unit
BS EN 12503-2:2001 BS EN 12503-2:2001. Sports mats. Pole vault and high jump mats, safety requirements
PD 6671:2001 PD 6671:2001. PNO-ISC/SER/012 Textphone Messaging Service Description
BS EN 12503-3:2001 BS EN 12503-3:2001. Sports mats. Judo mats, safety requirements
BS EN 13906-1:2002 BS EN 13906-1:2002. Cylindrical helical springs made from round wire and bar. Calculation and design. Compression springs
BS EN 13906-2:2001 BS EN 13906-2:2001. Cylindrical helical springs made from round wire and bar. Calculation and design. Extension springs
BS EN 13906-3:2001 BS EN 13906-3:2001. Cylindrical helical springs made from round wire and bar. Calculation and design. Torsion springs
BS EN 13081:2001 BS EN 13081:2001. Tanks for transport of dangerous goods. Service equipment for tanks. Vapour collection adapter and coupler
BS EN 13082:2001 BS EN 13082:2001. Tanks for transport of dangerous goods. Service equipment for tanks. Vapour transfer valve
BS EN 13083:2001 BS EN 13083:2001. Tanks for transport of dangerous goods. Service equipment for tanks. Adapter for bottom loading and unloading
BS EN 12503-4:2001 BS EN 12503-4:2001. Sports mats. Determination of shock absorption
BS EN 12503-5:2001 BS EN 12503-5:2001. Sports mats. Determination of the base friction
BS EN 12503-6:2001 BS EN 12503-6:2001. Sports mats. Determination of the top friction
WD/ISO21534 : 2002 EDTN 1 WD/ISO21534 : 2002 EDTN 1. ISO21534 : 2002 Non-active surgical implants Joint replacement implants - Particular requirements
BS EN 12503-7:2001 BS EN 12503-7:2001. Sports mats. Determination of static stiffness
WD/ISO21535 : 2002 EDTN 1 WD/ISO21535 : 2002 EDTN 1. ISO21535 : 2002 Non-active surgical implants- Joint Replacement implants- Specific requirements for hip-joint replacement implants
WD/ISO21536 : 2002 EDTN 1 WD/ISO21536 : 2002 EDTN 1. ISO21536 : 2002 Non-active surgical implants Joints replacement implants - Specific requirements for knee joint replacement implants
BS EN ISO 10628:2001 BS EN ISO 10628:2001. Flow diagrams for process plants. General rules
BS ISO 6971:2002 BS ISO 6971:2002. Cranked-link drag chains of welded construction, attachments and sprockets
BS ISO 10349-1:2002 BS ISO 10349-1:2002. Photography. Photographic-grade chemicals. Test methods. General
BS ISO 10349-13:2002 BS ISO 10349-13:2002. Photography. Photographic-grade chemicals. Test methods. Determination of pH
BS ISO 18905:2002 BS ISO 18905:2002. Imaging materials. Ammonia-processed diazo photographic film. Specifications for stability
BS EN 385:2001 BS EN 385:2001. Finger jointed structural timber. Performance requirements and minimum production requirements
BS EN 386:2001 BS EN 386:2001. Glued laminated timber. Performance requirements and minimum production requirements
BS IEC 60532:1992 BS IEC 60532:1992. Radiation protection instrumentation. Installed dose ratemeters, warning assemblies and monitors. X and gamma radiation of energy between 50 keV and 7 MeV
BS EN 387:2001 BS EN 387:2001. Glued laminated timber. Large finger joints. Performance requirements and minimum production requirements
BS EN 391:2002 BS EN 391:2002. Glued laminated timber. Delamination test of glue lines
BS ISO 12789:2000 BS ISO 12789:2000. Reference neutron radiations. Characteristics and methods of production of simulated workplace neutron fields
BS ISO 11929-4:2001 BS ISO 11929-4:2001. Determination of the detection limit and decision threshold for ionizing radiation measurements. Fundamentals and application to measurements by use of linear-
ISO13408-2 : 2003 EDTN 1 ISO13408-2 : 2003 EDTN 1. ISO13408-2 : 2003 Aseptic processing of health care products . Part 2: Filtration
BS EN ISO 10534-1:2001 BS EN ISO 10534-1:2001. Acoustics. Determination of sound absorption coefficient and impedance in impedances tubes. Method using standing wave ratio
BS ISO 10349-8:2002 BS ISO 10349-8:2002. Photography. Photographic-grade chemicals. Test methods. Determination of volatile matter
BS EN 61966-5:2001, IEC 61966-5:2000 BS EN 61966-5:2001, IEC 61966-5:2000. Multimedia systems and equipment. Colour measurement and management. Equipment using plasma display panels
PD 8888:2001 PD 8888:2001. Technical product documentation (TPD). An interim report
BS EN 62106:2001 BS EN 62106:2001. Specification of the radio data system (RDS) for VHF/FM sound broadcasting in the frequency range from 87,5 to 108,0 MHz
BS EN 61016:2001 BS EN 61016:2001. Helical-scan digital component video cassette recording system using 19 mm magnetic tape (format D-1)
BS EN ISO 15641:2001 BS EN ISO 15641:2001. Milling cutters for high speed machining. Safety requirements
BS EN 62193:2003 BS EN 62193:2003. Live working. Telescopic sticks and telescopic measuring sticks
BS EN 61243-1:2005 BS EN 61243-1:2005. Live working. Voltage detectors. Capacitive type to be used for voltages exceeding 1 kV a.c
BS ISO/TR 13989-1:2000 BS ISO/TR 13989-1:2000. Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears. Flash temperature method
BS ISO/TR 13989-2:2000 BS ISO/TR 13989-2:2000. Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears. Integral temperature method
BS EN 62124:2005 BS EN 62124:2005. Photovoltaic (PV) stand-alone systems. Design verification
BS EN 61347-2-10:2001, IEC 61347-2-10:2000 BS EN 61347-2-10:2001, IEC 61347-2-10:2000. Lamp controlgear. Particular requirements for electronic invertors and convertors for high-frequency operation of
BS IEC 60709:2004 BS IEC 60709:2004. Nuclear power plants. Instrumentation and control systems important to safety. Separation
BS 1202-1:2002 BS 1202-1:2002. Specification for nails. Steel nails
BS 7989:2001 BS 7989:2001. Specification for recirculatory filtration fume cupboards
BS EN 60086-1:2001 BS EN 60086-1:2001. Primary batteries. General
ISO/IECTR8802-1 : 2001 EDTN 3 ISO/IECTR8802-1 : 2001 EDTN 3. ISO/IECTR8802-1 : 2001 Information technology- Telecommunications and information exchange between systems - Local and metropolitan area ne
ISO/IEC9594-6 : 2001 EDTN4 ISO/IEC9594-6 : 2001 EDTN4. ISO/IEC9594-6 : 2001 Information Technology- Open Systems Interconnection- The Directory: Selected Attributed Types
BS ISO 18912:2002 BS ISO 18912:2002. Imaging materials. Processed vesicular photographic film. Specifications for stability
BS ISO 280:1998 BS ISO 280:1998. Essential oils. Determination of refractive index
BS ISO 875:1999 BS ISO 875:1999. Essential oils. Evaluation of miscibility in ethanol
BS ISO 1041:1973 BS ISO 1041:1973. Essential oils. Determination of freezing point
BS ISO 1242:1999 BS ISO 1242:1999. Essential oils. Determination of acid value
PD ISO/TR 11018:2001 PD ISO/TR 11018:2001. Essential oils. General guidance on the determination of flashpoint
BS EN ISO 15720:2001 BS EN ISO 15720:2001. Metallic coatings. Porosity tests. Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography
BS ISO 22628:2002 BS ISO 22628:2002. Road vehicles. Recyclability and recoverability. Calculation method
BS ISO 844:2001 BS ISO 844:2001. Cellular plastics. Compression test for rigid materials. Specification
BS ISO 21949:2001 BS ISO 21949:2001. Coated abrasives. Plain sheets with holes for dust extraction
BS EN 61300-2-2:2003 BS EN 61300-2-2:2003. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Mating durability
BS ISO 21950:2001 BS ISO 21950:2001. Coated abrasives. Plain discs
BS ISO 21951:2001 BS ISO 21951:2001. Coated abrasives. Plain discs with holes for dust extraction
BS EN 13290-3:2001 BS EN 13290-3:2001. Space project management. General requirements. Project organisation
PD 0024:2001 PD 0024:2001. Archival documents. Guide to the interpretation of BS 5454:2000. Storage and exhibition of archival documents
BS ISO 15686-2:2001 BS ISO 15686-2:2001. Buildings and constructed assets. Service life planning. Service life prediction procedures
BS EN 61300-3-4:2001, IEC 61300-3-4:2001 BS EN 61300-3-4:2001, IEC 61300-3-4:2001. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and m
BS ISO 8040:2001 BS ISO 8040:2001. Optics and optical instruments. Microscopes. Dimensions of tube slide and tube slot connections
BS 715:2005 BS 715:2005. Specification for metal flue boxes for gas-fired appliances not exceeding 20 kW
DD ENV 14237:2002 DD ENV 14237:2002. Textiles in the healthcare system
BS ISO 15636:2003 BS ISO 15636:2003. Back-up pads for vulcanized fibre discs
BS ISO 15637-1:2002 BS ISO 15637-1:2002. Holding fixtures of cylindrical abrasive sleeves. Holding fixtures with shank for hand-held grinding machines
05/30042912 DC 05/30042912 DC. prEN 15045. Transportable gas cylinders. Specification for the design and construction of refillable seamless aluminium or aluminium alloy gas cylinders for portable CO2
PAS 2001:2001 PAS 2001:2001. Knowledge management
BS EN 14189:2003 BS EN 14189:2003. Transportable gas cylinders. Inspection and maintenance of cylinder valves at time of periodic inspection of gas cylinders
05/30042957 DC 05/30042957 DC. EN 15047. Transportable gas cylinders. Specification for the design and construction of refillable seamless steel cylinders for portable portable fire extinguishers and
BS EN 14638-1:2006 BS EN 14638-1:2006. Transportable gas cylinders. Refillable welded receptacles of a capacity not exceeding 150 litres. Welded austenitic stainless steel cylinders made to a design j
ISO20081 : 2005 EDTN 1 ISO20081 : 2005 EDTN 1. ISO20081 : 2005 Zinc and zinc alloys - Method of sampling - Specifications
05/30042998 DC 05/30042998 DC. EN 14638-3. Transportable gas cylinders. Refillable welded receptacles of a capacitynot exceeding 150 litres. Part 3. Welded carbon steel cylinders made to a design just
BS EN 60702-1:2002, IEC 60702-1:2002 BS EN 60702-1:2002, IEC 60702-1:2002. Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V. Cables
BS EN 12493:2001 BS EN 12493:2001. Welded steel tanks for liquefied petroleum gas (LPG). Road tankers. Design and manufacture
BS EN 60702-2:2002, IEC 60702-2:2002 BS EN 60702-2:2002, IEC 60702-2:2002. Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V. Terminations
BS EN 60900:2004 BS EN 60900:2004. Live working. Hand tools for use up to 1000 V a.c. and 1500 V d.c.
BS ISO 6972:2002 BS ISO 6972:2002. Cranked-link mill chains of welded construction, attachments and sprockets
BS ISO 1984-1:2001 BS ISO 1984-1:2001. Test conditions for manually controlled milling machines with table of fixed height. Testing of the accuracy. Machines with horizontal spindle
BS ISO 14674:2005 BS ISO 14674:2005. Milk and milk powder. Determination of aflatoxin M1 content. Clean-up by immunoaffinity chromatography and determination by thin-layer chromatography
BS ISO 14961:2002 BS ISO 14961:2002. Space data and information transfer systems. Parameter value language specification
BS EN ISO 9902-1:2001 BS EN ISO 9902-1:2001. Textile machinery. Noise test code. Common requirements
BS ISO 17613-1:2006 BS ISO 17613-1:2006. Manually operated pumps for drinking water. Selection and acceptance. Southeast Asia
BS ISO 17332:2001 BS ISO 17332:2001. Cinematography. Manufacturer printed latent image identification information for 35mm motion-picture colour-print film. Specifications
BS EN 61850-9-1:2003 BS EN 61850-9-1:2003. Communication networks and systems in substations. Specific communication service mapping (SCSM). Sampled values over serial unidirectional multidrop point t
BS EN ISO 9902-2:2001 BS EN ISO 9902-2:2001. Textile machinery. Noise test code. Spinning preparatory and spinning machinery
BS EN ISO 9902-3:2001 BS EN ISO 9902-3:2001. Textile machinery. Noise test code. Nonwoven machines
BS EN ISO 9902-4:2001 BS EN ISO 9902-4:2001. Textile machinery. Noise test code. Yarn processing, cordage and rope manufacturing machines
BS EN ISO 9902-5:2001 BS EN ISO 9902-5:2001. Textile machinery. Noise test code. Weaving and knitting preparatory machinery
BS EN ISO 9902-6:2001 BS EN ISO 9902-6:2001. Textile machinery. Noise test code. Fabric manufacturing machines
BS EN 4408-1:2005 BS EN 4408-1:2005. Aerospace series. Technical drawings. Representation of parts made of composite materials. General rules
BS EN 61204-6:2001, IEC 61204-6:2000 BS EN 61204-6:2001, IEC 61204-6:2000. Low voltage power supplies, d.c. output. Requirements for low-voltage power supplies of assessed performance
BS EN 4408-2:2005 BS EN 4408-2:2005. Aerospace series. Technical drawings. Representation of parts made of composite materials. Laminated parts
BS EN 61850-7-3:2003 BS EN 61850-7-3:2003. Communication networks and systems in substations. Basic communication structure for substation and feeder equipment. Common data classes
BS EN 4408-3:2005 BS EN 4408-3:2005. Aerospace series. Technical drawings. Representation of parts made of composite materials. Parts including core materials
BS EN 61850-7-1:2003 BS EN 61850-7-1:2003. Communication networks and systems in substations. Basic communication structure for substation and feeder equipment. Principles and models
BS EN 4408-4:2005 BS EN 4408-4:2005. Aerospace series. Technical drawings. Representation of parts made of composite materials. Items obtained by winding
BS EN 60895:2003 BS EN 60895:2003. Live working. Conductive clothing for use at a nominal voltage up to 800 kV a.c. and ± 600 kV d.c.
BS EN 4408-5:2005 BS EN 4408-5:2005. Aerospace series. Technical drawings. Representation of parts made of composite materials. Seams
BS ISO 1984-2:2001 BS ISO 1984-2:2001. Test conditions for manually controlled milling machines with table of fixed height. Testing of the accuracy. Machines with vertical spindle
BS EN 62055-31:2005 BS EN 62055-31:2005. Electricity metering. Payments systems. Particular requirements. Static payment meters for active energy (classes 1 and 2)
BS EN 4408-6:2005 BS EN 4408-6:2005. Aerospace series. Technical drawings. Representation of parts made of composite materials. Preforms
BS EN ISO 10848-3:2006 BS EN ISO 10848-3:2006. Acoustics. Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms. Application to light elements when t
WD/ISO16750-1 : 2003 EDTN1 WD/ISO16750-1 : 2003 EDTN1. ISO16750-1 : 2003 Road vehicles - Environmental conditions and testing for electrical and electronic equipment. Part 1: General
WD/ISO16750-2 : 2003 EDTN1 WD/ISO16750-2 : 2003 EDTN1. ISO16750-2 : 2003 Road vehicles - Environmental conditions and testing for electrical and electronic equipment. Part 2: Electrical loads
WD/ISO16750-3 : 2003 EDTN1 WD/ISO16750-3 : 2003 EDTN1. ISO16750-3 : 2003 Road vehicles - Environmental conditions and testing for electrical and electronic equipment. Part 3: Mechanical loads
BS 1726-1:2002 BS 1726-1:2002. Cylindrical helical springs made from round wire and bar. Guide to methods of specifying, tolerances and testing. Compression springs
WD/ISO16750-4 : 2003 EDTN1 WD/ISO16750-4 : 2003 EDTN1. ISO16750-4 : 2003 Road vehicles - Environmental conditions and testing for electrical and and electronic equipment. Part 3: Climatic loads
BS 1726-2:2002 BS 1726-2:2002. Cylindrical helical springs made from round wire and bar. Guide to methods of specifying, tolerances and testing. Extension springs
ISO16750-5 : 2003 EDTN1 ISO16750-5 : 2003 EDTN1. ISO16750-5 : 2003 Road vehicles - Environmental conditions and testing for electrical and and electronic equipment. Part 5: Chemical loads
BS 1726-3:2002 BS 1726-3:2002. Cylindrical helical springs made from round wire and bar. Guide to methods of specifying, tolerances and testing. Torsion springs
BS 8726-1:2002 BS 8726-1:2002. Cylindrical helical springs made from rectangular and square section wire and bar. Guide to calculation and design. Compression springs
ISO20963 : 2005 EDTN 1 ISO20963 : 2005 EDTN 1. ISO20963 : 2005 Soil quality - Effects of pollutants on insect larvae (Oxythrea funesta) - Determination of acute toxicity
BS EN 14129:2004 BS EN 14129:2004. Pressure relief valves for LPG tanks
BS 7158:2001 BS 7158:2001. Plastics inspection chambers for drains and sewers. Specification
BS ISO 13317-1:2001 BS ISO 13317-1:2001. Determination of particle size distribution by gravitational liquid sedimentation methods. General principles and guidelines
BS ISO 13317-2:2001 BS ISO 13317-2:2001. Determination of particle size distribution by gravitational liquid sedimentation methods. Fixed pipette method
BS ISO 13317-3:2001 BS ISO 13317-3:2001. Determination of particle size distribution by gravitational liquid sedimentation methods. X-ray gravitational technique
BS EN 12201-1:2003 BS EN 12201-1:2003. Plastic piping systems for water supply. Polyethylene (PE). General
BS EN 12201-2:2003 BS EN 12201-2:2003. Plastic piping systems for water supply. Polyethylene (PE). Pipes
BS EN 12201-3:2003 BS EN 12201-3:2003. Plastic piping systems for water supply. Polyethylene (PE). Fittings
BS EN 12201-5:2003 BS EN 12201-5:2003. Plastic piping systems for water supply. Polyethylene (PE). Fitness for purpose of the system
BS 6001-7:2001 BS 6001-7:2001. Sampling procedures for inspection by attributes. Credit-based accept-zero sampling schemes for the control of outgoing quality for lot-by-lot inspection
BS ISO 18922:2003 BS ISO 18922:2003. Imaging materials. Processed photographic films. Methods for determining scratch resistance
BS ISO 18914:2002 BS ISO 18914:2002. Imaging materials. Photographic film and papers. Method for determining the resistance of photographic emulsions to wet abrasion
BS ISO 17710:2002 BS ISO 17710:2002. Plastics. Polyols for use in the production of polyurethane. Determination of degree of unsaturation by microtitration
BS ISO 14897:2002 BS ISO 14897:2002. Plastics. Polyols for use in the production of polyurethane. Determination of water content
BS 5385-2:2006 BS 5385-2:2006. Wall and floor tiling. Design and installation of external ceramic and mosaic wall tiling in normal conditions. Code of practice
PD 6672:2001 PD 6672:2001. Guide to the provision of performance information for domestic upholstery fabrics tested in accordance with BS 2543:1995 "Specification for woven and knitted fabrics fo
BS EN 12485:2001 BS EN 12485:2001. Chemicals used for treatment of water intended for human consumption. Calcium carbonate, high-calcium lime and half-burnt dolomite. Test methods
BS 8204-7:2003 BS 8204-7:2003. Screeds, bases and in-situ floorings. Pumpable self-smoothing screeds. Code of practice
ISO20807 : 2004 EDTN.1 ISO20807 : 2004 EDTN.1. ISO20807 : 2004 Non-destructive testing - Qualification of personnel for limited application of non-destructive testing
PD CR 1749:2001 PD CR 1749:2001. European scheme for the classification of gas appliances according to the method of evacuation of the products of combustion (Types)
BS EN 60401-1:2005 BS EN 60401-1:2005. Terms and nomenclature for cores made of magnetically soft ferrites. Terms used for physical irregularities
BS ISO 12238:2001 BS ISO 12238:2001. Pneumatic fluid power. Directional control valves. Measurement of shifting time
BS EN 60793-1-34:2002 BS EN 60793-1-34:2002. Optical fibres. Measurement methods and test procedures. Fibre curl
BS EN 60793-1-40:2003 BS EN 60793-1-40:2003. Optical fibres. Measurement methods and test procedures. Attenuation
BS EN 60793-1-42:2002 BS EN 60793-1-42:2002. Optical fibres. Measurement methods and test procedures. Chromatic dispersion
BS EN 13311-1:2001 BS EN 13311-1:2001. Biotechnology. Performance criteria for vessels. General performance criteria
ISO22649 : 2003 EDTN 1 ISO22649 : 2003 EDTN 1. ISO22649 : 2003 Footwear - Test methods for insoles and insocks - Water absorption and absorption and desorption
BS EN 13311-2:2001 BS EN 13311-2:2001. Biotechnology. Performance criteria for vessels. Pressure protection devices
ISO22653 : 2003 EDTN 1 ISO22653 : 2003 EDTN 1. ISO22653 : 2003 Footwear - Test methods for lining and insocks - Static friction
BS ISO/IEC 13249-6:2002 BS ISO/IEC 13249-6:2002. Information technology. Database languages. SQL multimedia and application packages. Data mining
BS EN 13311-4:2001 BS EN 13311-4:2001. Biotechnology. Performance criteria for vessels. Bioreactors
DD ENV 1452-7:2001 DD ENV 1452-7:2001. Plastics piping systems for water supply. Unplasticized poly(vinyl chloride) (PVC-U). Guidance for the assessment of conformity
BS EN 13311-5:2001 BS EN 13311-5:2001. Biotechnology. Performance criteria for vessels. Kill tanks
BS ISO 14899:2001 BS ISO 14899:2001. Plastics. Polyols for use in the production of polyurethane. Determination of basicity
BS EN 1115-1:2001 BS EN 1115-1:2001. Plastics piping systems for underground drainage and sewerage under pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (U
DD ENV 13801:2001 DD ENV 13801:2001. Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Thermoplastics. Recommended practice for installatio
BS EN 1636-6:2001 BS EN 1636-6:2001. Plastics piping systems for non-pressure drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Practices
BS EN 1636-3:2001 BS EN 1636-3:2001. Plastics piping systems for non-pressure drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Fittings
BS EN 1636-5:2001 BS EN 1636-5:2001. Plastics piping systems for non-pressure drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Fitness fo
BS EN 50370-2:2003 BS EN 50370-2:2003. Electromagnetic compatibility (EMC). Product family standard for machine tools. Immunity
BS EN 60936-3:2002 BS EN 60936-3:2002. Maritime navigation and radiocommunication equipment and systems. Radar. Radar with chart facilities. Performance requirements. Methods of testing and required t
BS EN 50371:2002 BS EN 50371:2002. Generic standard to demonstrate the compliance of low power electronic and electrical apparatus with the basic restrictions related to human exposure to electromagne
BS ISO 105-F03:2001 BS ISO 105-F03:2001. Textiles. Tests for colour fastness. Specification for polyamide adjacent fabric
BS ISO 105-F04:2001 BS ISO 105-F04:2001. Textiles. Tests for colour fastness. Specification for polyester adjacent fabric
BS ISO 105-F05:2001 BS ISO 105-F05:2001. Textiles. Tests for colour fastness. Specification for acrylic adjacent fabric
BS ISO 105-F07:2001 BS ISO 105-F07:2001. Textiles. Tests for colour fastness. Specification for secondary acetate adjacent fabric
BS EN 61188-5-2:2003 BS EN 61188-5-2:2003. Printed boards and assemblies. Design and use. Attachment (land/joint) considerations. Discrete components
BS EN 13267:2001 BS EN 13267:2001. Surface active agents. Determination of water content. Karl Fischer method
BS EN 13273:2001 BS EN 13273:2001. Surface active agents. Determination of the content of non-ionic substances in anionic surface active agents by high performance liquid chromatography (HPLC)
BS EN ISO 20126:2005 BS EN ISO 20126:2005. Dentistry. Manual toothbrushes. General requirements and test methods
BS EN ISO 20127:2005 BS EN ISO 20127:2005. Dentistry. Powered toothbrushes. General requirements and test methods
BS EN 4533-002:2006 BS EN 4533-002:2006. Aerospace series. Fibre optic systems. Handbook. Test and measurement
BS EN 4533-004:2006 BS EN 4533-004:2006. Aerospace series. Fibre optic systems. Handbook. Repair, maintenance and inspection
BS EN 1965-2:2001 BS EN 1965-2:2001. Structural adhesives. Corrosion. Determination and classification of corrosion to a brass substrate
BS EN 1965-1:2001 BS EN 1965-1:2001. Structural adhesives. Corrosion. Determination and classification of corrosion to a copper substrate
BS EN 10245-4:2003 BS EN 10245-4:2003. Steel wire and wire products. Organic coatings on steel wire. Polyester coated wire
BS EN 61000-6-4:2001 BS EN 61000-6-4:2001. Electromagnetic compatibility (EMC). Generic standards. Emission standard for industrial environments
BS EN 14119:2003 BS EN 14119:2003. Testing of textiles. Evaluation of the action of microfungi
BS 6001-9:2002 BS 6001-9:2002. Sampling procedures for inspection by attributes. Double sampling plans using minimal sample sizes, indexed by producer's risk quality (PRQ) and consumer's risk quality
BS EN 13635:2001 BS EN 13635:2001. Irrigation techniques. Localised irrigation systems. Terminology and data to be supplied by the manufacturer
BS EN 1906:2002 BS EN 1906:2002. Building hardware. Lever handles and knob furniture. Requirements and test methods
BS EN 61076-7-001:2004 BS EN 61076-7-001:2004. Connectors for electronic equipment. Cable outlet accessories. Blank detail specification
BS ISO 5288:2001 BS ISO 5288:2001. Synchronous belt drives. Vocabulary
BS EN 12792:2003 BS EN 12792:2003. Ventilation for buildings. Symbols, terminology and graphical symbols
BS ISO 10110-10:2004 BS ISO 10110-10:2004. Optics and photonics. Preparation of drawings for optical elements and systems. Table representing data of optical elements and cemented assemblies
BS ISO 4665:1998 BS ISO 4665:1998. Rubber, vulcanized and thermoplastic. Resistance to weathering
BS EN ISO 5183-2:2001 BS EN ISO 5183-2:2001. Resistance welding equipment. Electrode adaptors, male taper 1:10. Parallel shank fixing for end-thrust electrodes
BS EN 12964:2001 BS EN 12964:2001. Adhesives for leather and footwear materials. Lasting adhesives. Testing heat resistance of bonds at increasing temperature
BS EN 13206:2001 BS EN 13206:2001. Covering thermoplastic films for use in agriculture and horticulture
BS EN 13207:2001 BS EN 13207:2001. Silage thermoplastic films
BS EN ISO 14372:2001 BS EN ISO 14372:2001. Welding consumables. Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen
BS ISO/IEC 13522-7:2001 BS ISO/IEC 13522-7:2001. Information technology. Coding of multimedia and hypermedia information. Interoperability and conformance testing for ISO/IEC 13522-5
BSISO/IEC13522-8 : 2001 BSISO/IEC13522-8 : 2001 . Information technology - Coding of multimedia and hypermedia information stallation of lifts. Part 8: XML notation for ISO/IEC 13522-5
BS 6043-2.21.1:2001, ISO 12982-1:2000 BS 6043-2.21.1:2001, ISO 12982-1:2000. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Air reactivity of ca
BS ISO 4168:2002 BS ISO 4168:2002. Timekeeping instruments. Conditions for carrying out checks on radioluminescent deposits
BS EN 13286-44:2003 BS EN 13286-44:2003. Unbound and hydraulically bound mixtures. Test method for the determination of the alpha coefficient of vitrified blast furnace slag
BS EN 12962:2001 BS EN 12962:2001. Adhesives. Determination of elastic behaviour of liquid adhesives (elasticity index)
BS EN ISO 9934-3:2002 BS EN ISO 9934-3:2002. Non-destructive testing. Magnetic particle testing. Equipment
BS EN 12963:2001 BS EN 12963:2001. Adhesives. Determination of free monomer content in adhesives based on synthetic polymers
BS ISO 16915:2003 BS ISO 16915:2003. Tools for moulding. Sprue pullers
BS ISO 16916:2004 BS ISO 16916:2004. Tools for moulding. Tool specification sheet for injection moulds
BS ISO 16367:2001 BS ISO 16367:2001. Tools for pressing. Guide plates. U- and V-blocks
BS EN 3155-039:2007 BS EN 3155-039:2007. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, coaxial, size 16, female, type D, solder, class R. Product standard
BS EN 3155-040:2007 BS EN 3155-040:2007. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, coaxial, size 12, male, type D, solder, class R. Product standard
BS EN 3155-041:2007 BS EN 3155-041:2007. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, coaxial, size 12, female, type D, solder, class R. Product standard
BS EN 10184:2006 BS EN 10184:2006. Chemical analysis of ferrous materials. Determination of phosphorus in non-alloyed steels and irons. Molybdenum blue spectrophotometric method
BS EN 61809:2001, IEC 61809:2000 BS EN 61809:2001, IEC 61809:2000. Secondary cells and batteries containing alkaline or other non-acid electrolytes. Safety requirements for portable sealed alkaline se
BS 8887-1:2006 BS 8887-1:2006. Design for manufacture, assembly, disassembly and end-of-life processing (MADE). General concepts, process and requirements
ISO22803 : 2004 (r08) EDTN1 ISO22803 : 2004 (r08) EDTN1 . ISO22803 : 2004 dentistry - Membrane materials for guided tissue regeneration in oral and maxillofacial surgery - contents of a technical file
BS ISO 7914:2002 BS ISO 7914:2002. Forestry machinery. Portable chain-saws. Minimum handle clearance and sizes
BS EN 60455-3-1:2003 BS EN 60455-3-1:2003. Resin based reactive compounds used for electrical insulation. Specifications for individual materials. Unfilled epoxy resinous compounds. Sheet 1: Unfilled
BS EN 60455-3-2:2003 BS EN 60455-3-2:2003. Resin based reactive compounds used for electrical insulation. Specifications for individual materials. Quartz filled epoxy resinous compounds. Sheet 2: Quar
BS EN 60455-3-3:2003 BS EN 60455-3-3:2003. Resin based reactive compounds used for electrical insulation. Specifications for individual materials. Unfilled polyurethane compounds. Sheet 3: Unfilled po
BS ISO 15799:2003 BS ISO 15799:2003. Soil quality. Guidance on the ecotoxicological characterization of soils and soil materials
BS EN 60455-3-4:2003 BS EN 60455-3-4:2003. Resin based reactive compounds used for electrical insulation. Specifications for individual materials. Filled polyurethane compounds. Sheet 4: Filled polyur
BS EN 12255-11:2001 BS EN 12255-11:2001. Wastewater treatment plants. General data required
WD/DDENV807 : 2001 WD/DDENV807 : 2001. DDENV807 : 2001 Wood preservatives - Determination of the effectiveness against soft rotting micro-fungi and other soil inhabiting micro-organisms
BS EN 60684-3-229:2003 BS EN 60684-3-229:2003. Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Heat-shrinkable semi-flexible, polyvinyliden
BS EN 60684-3-165:2004 BS EN 60684-3-165:2004. Flexible insulating sleeving. Specifications for individual types of sleeving. Extruded Polyolefin, flame retarded, limited fire hazard sleeving
BS EN 4328:2002 BS EN 4328:2002. Aerospace series. Steel FE-WM1601 (X18CrWNi13-3-2). Filler metal for welding. Wire and rod
BS EN 4330:2002 BS EN 4330:2002. Aerospace series. Steel FE-WA4802 (X8CrNiMn27-22-2). Filler metal for welding. Wire and rod
BS EN 4331:2002 BS EN 4331:2002. Aerospace series. Steel FE-WL1804 (25CrMnMo4-2-2). Filler metal for welding. Wire and rod
BS EN 4332:2002 BS EN 4332:2002. Aerospace series. Steel FE-WL1805 (8CrMnMo12-4-9). Filler metal for welding. Wire and rod
BS EN 4333:2002 BS EN 4333:2002. Aerospace series. Steel FE-WA4902 (X5CrNiCoMoWMn21-20-20-3-3-2). Filler metal for welding. Wire and rod
BS EN 60255-22-1:2005 BS EN 60255-22-1:2005. Electrical relays. Electrical disturbance tests for measuring relays and protection equipment. 1 MHz burst immunity tests
BS EN 4334:2002 BS EN 4334:2002. Aerospace series. Steel FE-WL1806 (15CrMnMoV5-4-9-3). Filler metal for welding. Wire and rod
BS EN 3155-035:2006 BS EN 3155-035:2006. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, triaxial, size 08, female, type D, crimp, class R. Product standard
BS ISO 15707:2001 BS ISO 15707:2001. Information and documentation. International standard musical work code (ISWC)
BS EN 4335:2002 BS EN 4335:2002. Aerospace series. Steel FE-WA2602 (X4NiCrTiMoV26-15). Filler metal for welding. Wire and rod
BS EN 4336:2002 BS EN 4336:2002. Aerospace series. Steel FE-WA3801 (X4CrNiMn20-10-2). Filler metal for welding. Wire and rod
BS EN 4343:2002 BS EN 4343:2002. Aerospace series. Steel FE-WM1001 (X13Cr12). Filler metal for welding. Wire and rod
BS EN 4344:2001 BS EN 4344:2001. Aerospace series. Steel FE-WM1002 (X13Cr13). Filler metal for welding. Wire and rod
BS EN 2078:2002 BS EN 2078:2002. Aerospace series. Metallic materials. Manufacturing schedule, inspection schedule, inspection and test report. Definition, general principles, preparation and approval
BS EN 4059:2001 BS EN 4059:2001. Aerospace series. Filler rods and filler wire for welding in steel. Diameter 0,5 mm ≤ D ≤ 5,0 mm. Dimensions
BS EN 4060:2001 BS EN 4060:2001. Aerospace series. Filler rods and filler wires for welding in heat resisting alloys. Diameter 0,5 mm ≤ D ≤ 5,0 mm. Dimensions
BS EN 3892:2001 BS EN 3892:2001. Aerospace series. Titanium alloy TI-W64001. Filler metal for welding
BS EN 3893:2001 BS EN 3893:2001. Aerospace series. Titanium alloy TI-W19001. Filler metal for welding
BS EN 4058:2001 BS EN 4058:2001. Aerospace series. Filler rods and filler wires for welding in titanium and titanium alloys. Diameter 0,5 mm ≤ D ≤ 5,0 mm. Dimensions
BS EN 4341:2001 BS EN 4341:2001. Aerospace series. Aluminium alloy AL-W46431. Filler metal for welding. Wire and rod
BS EN 4342:2001 BS EN 4342:2001. Aerospace series. Titanium TI-W99001. Filler metal for welding. Wire and rod
PD CEN/TR 14920:2005 PD CEN/TR 14920:2005. Jetting resistance of drain and sewer pipes. Moving jet test method
BS EN 14457:2004 BS EN 14457:2004. General requirements for components specifically designed for use in trenchless construction of drains and sewers
BS EN 295-10:2005 BS EN 295-10:2005. Vitrified clay pipes and fittings and pipe joints for drains and sewers. Performance requirements
BS EN 13564-3:2003 BS EN 13564-3:2003. Anti-flooding devices for buildings. Quality assurance
BS EN 14396:2004 BS EN 14396:2004. Fixed ladders for manholes
BS EN 1253-5:2003 BS EN 1253-5:2003. Gullies for buildings. Gullies with light liquids closure
BS EN 3886:2001 BS EN 3886:2001. Aerospace series. Heat resisting alloy NI-WH1303 (NiCo20Cr20Mo5Ti2Al). Filler metal for welding
BS EN 3887:2001 BS EN 3887:2001. Aerospace series. Heat resisting alloy CO-WH4101 (CoCr20W15Ni). Filler metal for welding
BS EN 3888:2001 BS EN 3888:2001. Aerospace series. Heat resisting alloy CO-WH1402 (CoCr22Ni22W15). Filler metal for welding
BS EN 3889:2002 BS EN 3889:2002. Aerospace series. Steel FE-WM3801 (X5CrNiCu17-4). Filler metal for welding
BS EN 1253-1:2003 BS EN 1253-1:2003. Gullies for buildings. Requirements
BS EN 1253-2:2003 BS EN 1253-2:2003. Gullies for buildings. Test methods
BS EN 3890:2002 BS EN 3890:2002. Aerospace series. Steel FE-WM1502 (X11CrNiMoVN12-3). Filler metal for welding
BS EN 13508-1:2003 BS EN 13508-1:2003. Condition of drain and sewer systems outside buildings. General requirements
BS EN 3894:2001 BS EN 3894:2001. Aerospace series. Heat resisting alloy NI-WD3201 (NiMo25Fe6Cr5). Filler metal for welding
BS EN 3895:2001 BS EN 3895:2001. Aerospace series. Heat resisting alloy NI-WH3901 (NiCr16Mo15). Filler metal for welding
BS 7988:2002 BS 7988:2002. Code of practice for the use of information technology (IT) in the delivery of assessments
BS EN 3896:2002 BS EN 3896:2002. Aerospace series. Steel FE-WM1501 (X13CrNiMoCo12-3-2-2. Filler metal for welding
BS EN 3897:2002 BS EN 3897:2002. Aerospace series. Steel FE-WA4801 (X6CrNiMnNb18-10). Filler metal for welding
04/30044581 DC 04/30044581 DC. EN 12566-5. Small wastewater treatment systems up to 50 PT. Part 5. Pre-treated effluent filtration systems
BS EN 4326:2001 BS EN 4326:2001. Aerospace series. Heat resisting alloy CO-WH4102 (CoCr28W20Ni5V1). Filler metal for welding. Wire and rod
BS EN 4327:2001 BS EN 4327:2001. Aerospace series. Heat resisting alloy CO-WH1401 (CoCr26Ni11W8). Filler metal for welding. Wire and rod
BS EN 4329:2001 BS EN 4329:2001. Aerospace series. Heat resisting alloy NI-WH0001 (NiCr20). Filler metal for welding. Wire and rod
BS EN ISO 19954:2003 BS EN ISO 19954:2003. Footwear. Test methods for whole shoe. Washability in a domestic washing machine
BS EN 14801:2006 BS EN 14801:2006. Conditions for pressure classification of products for water and wastewater pipelines
BS EN 4337:2001 BS EN 4337:2001. Aerospace series. Heat resisting alloy NI-WH8901 (NiCr16Ti3Mn2). Filler metal for welding. Wire and rod
BS EN 4338:2001 BS EN 4338:2001. Aerospace series. Heat resisting alloy. NI-WH3902 (NiCr25Mo10C). Filler metal for welding. Wire and rod
BS EN 4339:2001 BS EN 4339:2001. Aerospace series. Heat resisting alloy CO-WH4001 (CoCr29W9). Filler metal for welding. Wire and rod
BS ISO 14535:2001 BS ISO 14535:2001. Photography. Room-light loading packages for electronic scanners and image-setting film and paper rolls. Dimensions and related requirements
BS 5911-6:2004 BS 5911-6:2004. Concrete pipes, and ancillary concrete products. Specification for road gullies and gully cover slabs
BS ISO 15175:2004 BS ISO 15175:2004. Soil quality. Characterization of soil related to groundwater protection
BS EN 4000:2002 BS EN 4000:2002. Aerospace series. Metallic materials. Rules for the drafting and presentation of dimensional standards for metallic semi-finished products
BS EN 1209:2003 BS EN 1209:2003. Chemicals used for treatment of water intended for human consumption. Sodium silicate
BS EN 13523-9:2001 BS EN 13523-9:2001. Coil coated metals. Test methods. Resistance to water immersion
ISO9051 : 2001 EDTN 2 (R08) ISO9051 : 2001 EDTN 2 (R08). ISO9051 : 2001 Fire-resistant glazed assemblies containing transparent or translucent glass, for use in building
BS EN 13523-13:2001 BS EN 13523-13:2001. Coil coated metals. Test methods. Resistance to accelerated ageing by the use of heat
BS EN 10017:2004 BS EN 10017:2004. Steel rod for drawing and/or cold rolling. Dimensions and tolerances
BS EN 10108:2004 BS EN 10108:2004. Round steel rod for cold heading and cold extrusion. Dimensions and tolerances
BS EN 13523-14:2001 BS EN 13523-14:2001. Coil coated metals. Test methods. Chalking (Helmen method)
BS 5N 100-7:2002 BS 5N 100-7:2002. Aircraft oxygen systems and equipment. Guide to cleaning labelling and packaging
BS EN 14136:2004 BS EN 14136:2004. Use of external quality assessment schemes in the assessment of the performance of in vitro diagnostic examination procedures
BS ISO 2561:2006 BS ISO 2561:2006. Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
BS EN 14118-1:2003 BS EN 14118-1:2003. Reinforcement. Specifications for textile glass mats (chopped strand and continuous filament mats). Designation
BS EN 14118-2:2003 BS EN 14118-2:2003. Reinforcement. Specifications for textile glass mats (chopped strand and continuous filament mats). Methods of test and general requirements
BS EN 14118-3:2003 BS EN 14118-3:2003. Reinforcement. Specifications for textile glass mats (chopped strand and continuous filament mats). Specific requirements
PD 6461-4:2004 PD 6461-4:2004. General metrology. Practical guide to measurement uncertainty
BS EN 61340-4-4:2005 BS EN 61340-4-4:2005. Electrostatics. Standard test methods for specific applications. Electrostatic classification of flexible intermediate bulk containers (FIBC)
BS 5499-5:2002 BS 5499-5:2002. Graphical symbols and signs. Safety signs, including fire safety signs. Signs with specific safety meanings
BS EN 12825:2001 BS EN 12825:2001. Raised access floors
BS EN 61988-1:2003 BS EN 61988-1:2003. Plasma display panels. Terminology and letter symbols
BS EN 13116:2001 BS EN 13116:2001. Curtain walling. Resistance to wind load. Performance requirements
BS EN 60747-16-4:2004 BS EN 60747-16-4:2004. Discrete semiconductor devices. Microwave integrated circuits. Switches
BS EN 990:2002 BS EN 990:2002. Test methods for verification of corrosion protection of reinforcement in autoclaved aerated concrete and lightweight aggregate concrete with open structure
WD/ISO4217 : 2001 EDTN 6 WD/ISO4217 : 2001 EDTN 6.
BS ISO 10962:2001 BS ISO 10962:2001. Securities and related financial instruments. Classification of Financial Instruments (CFI code)
BS ISO 15929:2002 BS ISO 15929:2002. Graphic technology. Prepress digital data exchange. Guidelines and principles for the development of PDF/X standards
BS EN 14123:2003 BS EN 14123:2003. Foodstuffs. Determination of aflatoxin B1 and the sum of aflatoxin B1, B2, G1 and G2 in peanuts, pistachios, figs, and paprika powder. High performance liquid chroma
BS EN 14130:2003 BS EN 14130:2003. Foodstuffs. Determination of vitamin C by HPLC
BS EN 14131:2003 BS EN 14131:2003. Foodstuffs. Determination of folate by microbiological assay
BS ISO 123:2001 BS ISO 123:2001. Rubber latex. Sampling
BS EN 62005-1:2001, IEC 62005-1:2001 BS EN 62005-1:2001, IEC 62005-1:2001. Reliability of fibre optic interconnecting devices and passive optical components. Introductory guide and definitions
BS EN 4604-001:2006 BS EN 4604-001:2006. Aerospace series. Cable, electrical, for signal transmission. Technical specification
ISO20279 : 2005 EDTN1 ISO20279 : 2005 EDTN1. ISO20279 : 2005 Soil quality - Extraction of thallium and determination by electrothermal atomic absorption spectrometry
BS EN 13274-5:2001 BS EN 13274-5:2001. Respiratory protective devices. Methods of test. Climatic conditions
BS ISO 12124:2001 BS ISO 12124:2001. Acoustics. Procedures for the measurement of real-ear acoustical characteristics of hearing aids
01/106247 DC 01/106247 DC. ISO 8339. Building construction . Jointing products. Sealants. Determination of tensile properties
BS EN 61010-2-045:2001 BS EN 61010-2-045:2001. Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for washer disinfectors used in medical
BS EN ISO 15320:2003 BS EN ISO 15320:2003. Pulp, paper and board. Determination of pentachlorophenol in an aqueous extract
BS EN 14134:2004 BS EN 14134:2004. Ventilation for buildings. Performance testing and installation checks of residential ventilation systems
BS EN 13181:2001 BS EN 13181:2001. Ventilation for buildings. Terminals. Performance testing of louvres. Performance testing of louvres subject to simulated sand
BS EN 12239:2001 BS EN 12239:2001. Ventilation for buildings. Air terminal devices. Aerodynamic testing and rating for displacement flow applications
BS EN 12238:2001 BS EN 12238:2001. Ventilation for buildings. Air terminal devices. Aerodynamic testing and rating for mixed flow application
DD ENV 13999-1:2001 DD ENV 13999-1:2001. Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application. General procedure
BS ISO/IEC 14519:2001 BS ISO/IEC 14519:2001. Information technology. POSIX Ada language interfaces. Binding for system application program interface (API)
BS EN 122340:2002 BS EN 122340:2002. Harmonized system of quality assessment for electronic components. Sectional specification. Radio frequency coaxial connectors. Series MMCX
BS ISO 13041-1:2004 BS ISO 13041-1:2004. Test conditions for numeriaclly controlled turning machines and turning centres. Geometric tests for machines with a horizontal workholding spindle
BS EN 1757-3:2002 BS EN 1757-3:2002. Safety of industrial trucks. Pedestrian propelled trucks. Platform trucks
BS EN 1757-4:2003 BS EN 1757-4:2003. Safety of industrial trucks. Pedestrian propelled trucks. Scissor lift pallet-trucks
BS ISO/IEC 9075-13:2002 BS ISO/IEC 9075-13:2002. Information technology. Database languages. SQL. SQL routines and types using the Java programming language (SQL/JRT)
BS ISO 8254-3:2004 BS ISO 8254-3:2004. Paper and board. Measurement of specular gloss. 20 degree gloss with a converging beam, TAPPI method
BS ISO 13041-7:2004 BS ISO 13041-7:2004. Test conditions for numerically controlled turning machines and turning centres. Evaluation of contouring performance in the coordinate planes
WD/ISO/IEC10646-2 : 2001 EDTN 1 WD/ISO/IEC10646-2 : 2001 EDTN 1. ISO/IEC10646-2 : 2001 Information technology- Universal Multiple-Octet Coded Character Set (UCS). Part 2: Supplementary Planes
BS ISO 13041-8:2004 BS ISO 13041-8:2004. Test conditions for numerically controlled turning machines and turning centres. Evaluation of thermal distortions
BS ISO 13041-6:2005 BS ISO 13041-6:2005. Test conditions for numerically controlled turning machines and turning centres. Accuracy of a finished test piece
BS ISO 8096:2005 BS ISO 8096:2005. Rubber- or plastics-coated fabrics for water resistant clothing. Specification
BS EN ISO 7590:2001 BS EN ISO 7590:2001. Steel cord conveyor belts. Methods for the determination of total thickness and cover thickness
BS EN 12972:2001 BS EN 12972:2001. Tanks for transport of dangerous goods. Testing, inspection and marking of metallic tanks
BS 8440-1:2005 BS 8440-1:2005. Health informatics. Medical digital imaging. Profiles format. General principles
BS 8440-2:2005 BS 8440-2:2005. Health informatics. Medical digital imaging. Profiles format. Particular requirements for metadata profiles
BS EN 13720:2002 BS EN 13720:2002. Transportable gas cylinders. Filling conditions for acetylene battery vehicles
BS ISO 13689:2001 BS ISO 13689:2001. Refrigerated light hydrocarbon fluids. Measurement of liquid levels in tanks containing liquefied gases. Microwave-type level gauge
PD IEC/PAS 62240:2001, IEC/PAS 62240:2001 PD IEC/PAS 62240:2001, IEC/PAS 62240:2001. Use of semiconductor devices outside manufacturer's specified temperature ranges
PD IEC/PAS 62239:2001, IEC/PAS 62239:2001 PD IEC/PAS 62239:2001, IEC/PAS 62239:2001. Electronic component management plans
BS EN 13173:2001 BS EN 13173:2001. Cathodic protection for steel offshore floating structures
BS EN 60252-1:2001, IEC 60252-1:2001 BS EN 60252-1:2001, IEC 60252-1:2001. A.C. motor capacitors. General. Performance, testing and rating. Safety requirements. Guide for installation and operation
BS EN 13174:2001 BS EN 13174:2001. Cathodic protection for harbour installations
BS EN ISO 14919:2001 BS EN ISO 14919:2001. Thermal spraying, Wires, rods and cords for flame and arc spraying. Classification. Technical supply conditions
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
