BIS Standards Catalogue
04/30113653 DC 04/30113653 DC. IEC 61300-2-48 AMD 1. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-48. Tests. Temperature-humidity cycling
BS EN 60079-7:2007 BS EN 60079-7:2007. Explosive atmospheres. Equipment protection by increased safety "e"
BS EN ISO 6504-3:2007, BS 3900-D11:2007 BS EN ISO 6504-3:2007, BS 3900-D11:2007. Paints and varnishes. Determination of hiding power. Determination of contrast ratio of light-coloured paints at a fixe
04/30113672 DC 04/30113672 DC. IEC 61300-2-1 AMD 1. ED 20. Basic test and measurement procedures. Part 2-1. Tests. Vibration (sinusoidal)
BS EN ISO 4090:2004 BS EN ISO 4090:2004. Photography. Medical radiographic cassettes/screens/films and hard-copy imaging films. Dimensions and specifications
PAS 64:2005 PAS 64:2005. Professional water mitigation and initial restoration of domestic dwellings. Code of practice
BIP 2029:2003 BIP 2029:2003. Construction Safety. Questions and answers. A Practical approach
BIP 2030:2002 BIP 2030:2002. CDM. Questions and answers. A Practical approach. 2nd edition
BIP 2031:2003 BIP 2031:2003. Health and Safety. Questions and answers. A Practical approach
BIP 2033:2003 BIP 2033:2003. Risk Assessment. Questions and answers. A Practical approach
BIP 2026:2003 BIP 2026:2003. Whole Life-cycle Costing. Risk and risk responses
BIP 2027:2004 BIP 2027:2004. The JCT Major Projects Form
BIP 0004:2004 BIP 0004:2004. An Introduction to Information Management
BS EN 300:2006 BS EN 300:2006. Oriented strand boards (OSB). Definitions, classification and specifications
BS EN ISO 13503-4:2006 BS EN ISO 13503-4:2006. Petroleum and natural gas industries. Completion fluids and materials. Procedure for measuring stimulation and gravel-pack fluid leakoff under static con
BS EN ISO 13503-5:2006 BS EN ISO 13503-5:2006. Petroleum and natural gas industries. Completion fluids and materials. Procedures for measuring the long term conductivity of proppants
BS EN ISO 22475-1:2006 BS EN ISO 22475-1:2006. Geotechnical investigation and testing. Sampling methods and groundwater measurements. Technical principles for execution
BS ISO 11275:2004 BS ISO 11275:2004. Soil quality. Determination of unsaturated hydraulic conductivity and water-retention characteristic. Wind's evaporation method
BS ISO 6969:2004 BS ISO 6969:2004. Road vehicles. Sound signalling devices. Tests after mounting on vehicle
BS EN 12976-1:2006 BS EN 12976-1:2006. Thermal solar systems and components. Factory made systems. General requirements
BS ISO 3865:2005 BS ISO 3865:2005. Rubber, vulcanized or thermoplastic. Methods of test for staining in contact with organic material
PAS 59:2004 PAS 59:2004. Filled collective fall arrest systems
BS EN 60846:2004 BS EN 60846:2004. Radiation protection instrumentation. Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation
BS ISO 14531-4:2006 BS ISO 14531-4:2006. Plastics pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels. Metric series. Specifications. System design and
BS ISO 18207:2006 BS ISO 18207:2006. Road vehicles. Trailers up to 3,5 t. Control of welded towing brackets for coupling ball after fatigue testing
BS EN 60286-5:2004 BS EN 60286-5:2004. Packaging of components for automatic handling. Matrix trays
DD ISO/TS 21667:2004 DD ISO/TS 21667:2004. Health informatics. Health indicators conceptual framework
BS ISO 15634:2005 BS ISO 15634:2005. Iron ores. Determination of chromium content. Flame atomic absorption spectrometric method
DD CEN/TS 12983-2:2005 DD CEN/TS 12983-2:2005. Cookware. Domestic cookware for use on top of a stove, cooker or hob. Further general requirements and specific requirements for ceramic, glass and glass
BS EN 14951:2006 BS EN 14951:2006. Solid hardwood paneling and cladding. Machined profiles elements
BS EN 14957:2006 BS EN 14957:2006. Food processing machinery. Dishwashing machines with conveyor. Safety and hygiene requirements
04/30113869 DC 04/30113869 DC. EN 1506. Ventilation for buildings. Sheet metal air ducts and fittings with circular cross-section. Dimension
BS ISO 17313:2004 BS ISO 17313:2004. Soil quality. Determination of hydraulic conductivity of saturated porous materials using a flexible wall permeameter
BS EN 14932:2006 BS EN 14932:2006. Plastics. Stretch thermoplastic films for wrapping bales. Requirements and test methods
BS EN 14870-2:2004 BS EN 14870-2:2004. Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems. Fittings
BS ISO 13704:2001 BS ISO 13704:2001. Petroleum and natural gas industries. Calculation of heater-tube thickness in petroleum refineries
BS EN 61558-2-9:2003 BS EN 61558-2-9:2003. Safety of power transformers, power supply units and similar products. Particular requirements for transformers for class III handlamps for tungsten filament
BS EN 14593-1:2005 BS EN 14593-1:2005. Respiratory protective devices. Compressed air line breathing apparatus with demand valve. Apparatus with a full mask. Requirements, testing, marking
BS EN 14593-2:2005 BS EN 14593-2:2005. Respiratory protective devices. Compressed air line breathing apparatus with demand valve. Apparatus with a half mask at positive pressure. Requirements, testing
BS EN 14594:2005 BS EN 14594:2005. Respiratory protective devices. Continuous flow compressed air line breathing apparatus. Requirements, testing, marking
BS EN 12916:2006, BS 2000-391:2006 BS EN 12916:2006, BS 2000-391:2006. Petroleum products. Determination of aromatic hydrocarbon types in middle distillates. High performance liquid chromatography met
BS ISO 22977:2005 BS ISO 22977:2005. Road vehicles. M12 x 1,25 spark-plugs with flat seating and 14 mm bi-hexagon and their cylinder head housing
BS EN ISO 10077-1:2006 BS EN ISO 10077-1:2006. Thermal performance of windows, doors and shutters. Calculation of thermal transmittance. General
ISO8644 : 2006 EDTN2 ISO8644 : 2006 EDTN2. ISO 8644 Motorcycles - Light-alloy wheels - Test method
BS EN 62290-1:2006 BS EN 62290-1:2006. Railway applications. Urban guided transport management and command/control systems. System principles and fundamental concepts
BS EN ISO 6165:2006 BS EN ISO 6165:2006. Earth-moving machinery. Basic types. Identification and terms and definitions
BS EN 14291:2004 BS EN 14291:2004. Foam producing solutions for leak detection on gas installations
BS EN 61558-2-23:2001, IEC 61558-2-23:2000 BS EN 61558-2-23:2001, IEC 61558-2-23:2000. Safety of power transformers, power supply units and similar. Particular requirements for transformers for constr
DD IEC/TS 61934:2006 DD IEC/TS 61934:2006. Electrical insulating materials and systems. Electrical measurement of partial discharges (PD) under short rise time and repetitive voltage impulses
BS ISO 10275:2007 BS ISO 10275:2007. Metallic materials. Sheet and strip. Determination of tensile strain hardening exponent
BS 3632:2005 BS 3632:2005. Residential park homes. Specification
04/30113996 DC 04/30113996 DC. prEN81-41. Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods. Part 41. Vertical lifting platforms intende
BS EN 14294:2004 BS EN 14294:2004. Adhesives for leather and footwear materials. Preparation of bonded test pieces by moulding-on processes
BS EN 1504-6:2006 BS EN 1504-6:2006. Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. Anchoring of re
BS EN ISO 6401:2004 BS EN ISO 6401:2004. Plastics. Homopolymer and copolymer resins of vinyl chloride. Determination of residual vinyl chloride monomer. Gas chromatographic method
BS EN ISO 15797:2004 BS EN ISO 15797:2004. Textiles. Industrial washing and finishing procedures for testing of workwear
BS EN 13872:2004 BS EN 13872:2004. Method of test for smoothing and/or levelling compounds. Determination of dimensional change
ISO14096-1 : 2005 EDTN1 ISO14096-1 : 2005 EDTN1. ISO14096-1 : 2005 Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1: Definitions, quantitative measurements of
ISO14096-2 : 2005 EDTN1 ISO14096-2 : 2005 EDTN1. ISO14096-2 : 2005 Non-destructive testing - Qualification of radiographic film digitisation systems - Part 2 : Minimum requirements
BS ISO 4831:2006 BS ISO 4831:2006. Microbiology of food and animal feeding stuffs. Horizontal method for the detection and enumeration of coliforms. Most probable number technique
ISO/TR17671-5 : 2004 EDTN 1 ISO/TR17671-5 : 2004 EDTN 1. ISO/TR17671-5 : 2004 Welding - Recommendations for welding of metallic materials. Part 5 : Welding of clad steels
PD CEN/TR 14922:2004 PD CEN/TR 14922:2004. Portable fire extinguishers. Model laboratory. Report in compliance with EN 3-7
BS EN ISO 20837:2006 BS EN ISO 20837:2006. Microbiology of food and animal feeding stuffs. Polymerase chain reaction (PCR) for the detection of food-borne pathogens. Requirements for sample preparatio
BS ISO 15686-6:2004 BS ISO 15686-6:2004. Buildings and constructed assets. Service life planning. Procedures for considering environmental impacts
BS EN ISO 15749-2:2004 BS EN ISO 15749-2:2004. Ships and marine technology. Drainage systems on ships and marine structures. Sanitary drainage, drain piping for gravity system
BS EN ISO 15749-3:2004 BS EN ISO 15749-3:2004. Ships and marine technology. Drainage systems on ships and marine structures. Sanitary drainage, drain piping for vacuum system
BS EN ISO 15749-5:2004 BS EN ISO 15749-5:2004. Ships and marine technology. Drainage systems on ships and marine structures. Drainage of decks, cargo spaces and swimming pools
BS EN ISO 15749-4:2004 BS EN ISO 15749-4:2004. Ships and marine technology. Drainage systems on ships and marine structures. Sanitary drainage, sewage disposal pipes
BS EN 12441-2:2002 BS EN 12441-2:2002. Zinc and zinc alloys. Chemical analysis. Determination of magnesium in zinc alloys. Flame atomic absorption spectrometric method
BS ISO 12739:2006 BS ISO 12739:2006. Zinc sulfide concentrates. Determination of zinc. Ion-exchange/EDTA titrimetric method
BS ISO 10469:2006 BS ISO 10469:2006. Copper sulfide concentrates. Determination of copper. Electrogravimetric method
BS ISO 13291:2006 BS ISO 13291:2006. Zinc sulfide concentrates. Determination of zinc. Solvent extraction and EDTA titrimetric method
BS EN 12976-2:2006 BS EN 12976-2:2006. Thermal solar systems components. Factory made systems. Test methods
BS ISO 8573-2:2007 BS ISO 8573-2:2007. Compressed air. Test methods for oil aerosol content
ISO17874-4 : 2006 EDTN1 ISO17874-4 : 2006 EDTN1. ISO17874-4 : 2006 Remote handling devices for radioactive materials. Part 4: Power manipulators
BIP 2037:2004 BIP 2037:2004. The Conductive Organisation. Building beyond sustainability
BS ISO 22168:2006 BS ISO 22168:2006. Road vehicles. Holding test of coatings influencing the colour of light emitted by light sources). Test methods
BS EN 14959:2006 BS EN 14959:2006. Touch and close fasteners. Determination of resistance to fraying after washing
BS EN 60464-3-1:2002, IEC 60464-3-1:2001 BS EN 60464-3-1:2002, IEC 60464-3-1:2001. Varnishes used for electrical insulation. Specifications for individual materials. Sheet 1: Ambient curing finishing
BS EN 13480-6:2004 BS EN 13480-6:2004. Metallic industrial piping. Additional requirements for buried piping
BS ISO 9022-7:2005 BS ISO 9022-7:2005. Optics and photonics. Environmental test methods. Resistance to drip or rain
BS ISO 10109-1:2006 BS ISO 10109-1:2006. Optics and photonics. Environmental requirements. General overview, terms and definitions, climatic zones and their parameters
BS ISO 10109-6:2005 BS ISO 10109-6:2005. Optics and photonics. Environmental requirements. Test requirements for medical optical devices
BS ISO 10109-8:2005 BS ISO 10109-8:2005. Optics and photonics. Environmental requirements. Test requirements for extreme conditions of use
CWA 14170:2004 CWA 14170:2004. Security requirements for signature creation applications
CWA 14167-2:2004 CWA 14167-2:2004. Crytographic module for CSP signing operations with back-up. Protection profile (CMCSOB-PP)
CWA 14167-3:2004 CWA 14167-3:2004. Cryptographic module for CSP key generation services. Protection profile (CMCKG-PP)
CWA 14167-4:2004 CWA 14167-4:2004. Cryptographic module for CSP signing operations. Protection profile (CMCSO-PP)
BS EN 60320-1:2001+A1:2007 BS EN 60320-1:2001+A1:2007. Appliance couplers for household and similar general purposes. General requirements
CWA 14171:2004 CWA 14171:2004. General guidelines for electronic signature verification
CWA 14890-2:2004 CWA 14890-2:2004. Application interface for smart cards used as secure signature creation devices. Additional Services
CWA 15005:2004 CWA 15005:2004. ICT curriculum development guidelines for the ICT supply Industry. A review by the CEN/ISSS ICT-Skills Workshop of the career space work
CWA 14923-1:2004 CWA 14923-1:2004. J/extensions for financial services (J/XFS) for the Java platform. Base architecture. Programmer's reference
CWA 14923-2:2004 CWA 14923-2:2004. J/extensions for financial services (J/XFS) for the Java platform. Pin keypad device class interface. Programmer's reference
DD CEN ISO/TS 17261:2005 DD CEN ISO/TS 17261:2005. Intelligent transport systems. Automatic vehicle and equipment identification. Intermodal goods transport architecture and terminology
CWA 14923-3:2004 CWA 14923-3:2004. J/extensions for financial services (J/XFS) for the Java platform. Magnetic stripe & chip card device class interface. Programmer's reference
CWA 14923-4:2004 CWA 14923-4:2004. J/extensions for financial services (J/XFS) for the Java platform. Text input/output device interface. Programmer's reference
CWA 14923-5:2004 CWA 14923-5:2004. J/extensions for financial services (J/XFS) for the Java platform. Cash dispenser, recycler and ATM device class interface. Programmer's reference
DD CEN ISO/TS 18234-1:2006 DD CEN ISO/TS 18234-1:2006. Traffic and travel information (TTI). TTI via transport protocol expert group (TPEG) data-streams. Introduction, numbering and versions
CWA 14923-6:2004 CWA 14923-6:2004. J/extensions for financial services (J/XFS) for the Java platform. Printer device class interface. Programmer's reference
DD CEN ISO/TS 18234-2:2006 DD CEN ISO/TS 18234-2:2006. Traffic and travel information (TTI). TTI via transport protocol expert group (TPEG) data-streams. Syntax, semantics and framing structure (SSF)
CWA 14923-7:2004 CWA 14923-7:2004. J/extensions for financial services (J/XFS) for the Java platform. Alarm device interface. Programmer's reference
DD CEN ISO/TS 18234-3:2006 DD CEN ISO/TS 18234-3:2006. Traffic and travel information (TTI). TTI via transport protocol expert group (TPEG) data-streams. Service and network information (SNI) applicat
CWA 14923-8:2004 CWA 14923-8:2004. J/extensions for financial services (J/XFS) for the Java platform. Sensors and indicators unit device class interface. Programmer's reference
DD CEN ISO/TS 18234-4:2006 DD CEN ISO/TS 18234-4:2006. Traffic and travel information (TTI). TTI via transport protocol expert group (TPEG) data-streams. Road traffic message (RTM) application
DD CEN ISO/TS 18234-5:2006 DD CEN ISO/TS 18234-5:2006. Traffic and travel information (TTI). TTI via transport protocol expert group (TPEG) data-streams. Public transport information (PTI) application
CWA 14923-9:2004 CWA 14923-9:2004. J/extensions for financial services (J/XFS) for the Java platform. Depository device class interface. Programmer's reference
CWA 14923-10:2004 CWA 14923-10:2004. J/extensions for financial services (J/XFS) for the Java platform. Check reader/scanner device class interface. Programmer's reference
DD CEN ISO/TS 18234-6:2006 DD CEN ISO/TS 18234-6:2006. Traffic and travel information (TTI). TTI via transport protocol expert group (TPEG) data-streams. Location referencing applications
CWA 14923-11:2004 CWA 14923-11:2004. J/extensions for financial services (J/XFS) for the Java platform. Camera specification. Programmer's reference
CWA 14923-12:2004 CWA 14923-12:2004. J/extensions for financial services (J/XFS) for the Java platform. Vendor dependant mode specification. Programmer's reference
BS EN 50164-2:2002 BS EN 50164-2:2002. Lightning protection components (LPC). Requirements for conductors and earth electrodes
BS EN 60320-2-4:2006 BS EN 60320-2-4:2006. Appliance couplers for household and similar general purposes. Couplers dependent on appliance weight for engagement
BS EN ISO 20838:2006 BS EN ISO 20838:2006. Microbiology of food and animal feeding stuffs. Polymerase chain reaction (PCR) for the detection of food-borne pathogens. Requirements for amplification and
ISO/TS20646-1 : 2004 EDTN 1 ISO/TS20646-1 : 2004 EDTN 1. ISO/TR20646-1 : 2004 Ergonomic procedures for the improvement of local muscular workloads. Part 1: Guidelines for reducing local muscular workl
BS EN ISO 14555:2006 BS EN ISO 14555:2006. Welding. Arc stud welding of metallic materials
04/30114339 DC 04/30114339 DC. IEC 61753-082-2. Fibre optic interconnecting devices and passive components performance standard. Part 082-2. Pigtailed 1,31/1,55 um WWDM devices for category C. Control
BS ISO 15830-1:2005 BS ISO 15830-1:2005. Road vehicles. Design and performance specifications for the WorldSID 50th percentile male side-impact dummy. Terminology and rationale
BS ISO 15830-2:2005 BS ISO 15830-2:2005. Road vehicles. Design and performance specifications for the WorldSID 50th percentile male side-impact dummy. Mechanical subsystems
BS ISO 15830-3:2005 BS ISO 15830-3:2005. Road vehicles. Design and performance specifications for the WorldSID 50th percentile male side-impact dummy. Electronic subsystems
BS ISO 15830-4:2005 BS ISO 15830-4:2005. Road vehicles. Design and performance specifications for the WorldSID 50th percentile male side-impact dummy. User's manual
BS ISO 17713-1:2007 BS ISO 17713-1:2007. Meteorology. Wind measurements. Wind tunnel test methods for rotating anemometer performance
BS EN 10339:2007 BS EN 10339:2007. Steel tubes for onshore and offshore water pipelines. Internal liquid applied epoxy linings for corrosion protection
BS ISO 3575:2005 BS ISO 3575:2005. Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities
BS ISO 14788:2005 BS ISO 14788:2005. Continuous hot-dip zinc-5% aluminium alloy coated steel sheet
BS EN 622-3:2004 BS EN 622-3:2004. Fibreboards. Specifications. Requirements for medium boards
BS EN 12369-2:2004 BS EN 12369-2:2004. Wood-based panels. Characteristic values for structural design. Plywood
BS EN ISO 15927-4:2005 BS EN ISO 15927-4:2005. Hygrothermal performance of buildings. Calculation and presentation of climatic data. Hourly data for assessing the annual energy use for heating and coo
BS EN ISO 18594:2007 BS EN ISO 18594:2007. Resistance spot-, projection- and seam-welding. Method for determining the transition resistance on aluminium and steel material
04/30114458 DC 04/30114458 DC. EN 14905. Copper and copper alloys. Plumbing fittings. Recommended practice for the installation of copper and copper alloy plumbing fittings
BS EN 14935:2006 BS EN 14935:2006. Copper and copper alloys. Determination of impurities in pure copper. ETA-AAS method
BS EN 14936-1:2006 BS EN 14936-1:2006. Copper and copper alloys. Determination of aluminium content. Titrimetric method
BS EN 14936-2:2006 BS EN 14936-2:2006. Copper and copper alloys. Determination of aluminium content. FAAS method
BS EN 14937-1:2006 BS EN 14937-1:2006. Copper and copper alloys. Determination of antimony content. Spectrophotometric method
BS EN 14937-2:2006 BS EN 14937-2:2006. Copper and copper alloys. Determination of antimony content. FAAS method
DD CEN/TS 14938-2:2006 DD CEN/TS 14938-2:2006. Copper and copper alloys. Determination of bismuth content. FAAS method
BS EN 14939:2006 BS EN 14939:2006. Copper and copper alloys. Determination of beryllium content. FAAS Method
BS EN 14940-2:2006 BS EN 14940-2:2006. Copper and copper alloys. Determination of chromium content. FAAS method
BS EN 14941:2006 BS EN 14941:2006. Copper and copper alloys. Determination of cobalt content. FAAS method
BS EN 14942-2:2006 BS EN 14942-2:2006. Copper and copper alloys. Determination of arsenic content. FAAS method
BS ISO/IEC 19796-1:2005 BS ISO/IEC 19796-1:2005. Information technology. Learning, education and training. Quality manage ment, assurance and metrics. General approach
BS ISO 15597:2001, BS 2000-503:2004 BS ISO 15597:2001, BS 2000-503:2004. Methods of test for petroleum and its products. BS 2000-503. Determination of chlorine and bromine content. Wavelength-dispersi
BS ISO 7270-1:2003 BS ISO 7270-1:2003. Rubber. Analysis by pyrolytic gas-chromatographic methods. Identification of polymers (single polymers and polymer blends)
BS EN ISO 13791:2004 BS EN ISO 13791:2004. Thermal performance of buildings. Calculation of internal temperatures of a room in summer without mechanical cooling. General criteria and validation proced
BS EN 55015:2006 BS EN 55015:2006. Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
04/30114690 DC 04/30114690 DC. EN 131-5. Ladders. Part 5. Accessories for ladders
BS EN 60308:2005 BS EN 60308:2005. Hydraulic turbines. Testing of control systems
BS EN 61338-2:2004 BS EN 61338-2:2004. Waveguide type dielectric resonators. Guidelines for oscillator and filter applications
04/30114758 DC 04/30114758 DC. IEC 60092-350 ED.3. Electrical installation in ship. Part 350. Shipboard power cables. General construction and test requirements
BS EN 14499:2004 BS EN 14499:2004. Textile floor coverings. Minimum requirements for carpet underlays
BS EN 14960:2006 BS EN 14960:2006. Inflatable play equipment. Safety requirements and test methods
BS EN 14974:2006 BS EN 14974:2006. Facilities for users of roller sports equipment. Safety requirements and test methods
BS EN 14977:2006 BS EN 14977:2006. Copper and copper alloys. Detection of tensile stress. 5% ammonia test
BS ISO 17593:2007 BS ISO 17593:2007. Clinical laboratory testing and in vitro medical devices. Requirements for in vitro monitoring systems for self-testing of oral anticoagulant therapy
BS EN ISO 8871-4:2006 BS EN ISO 8871-4:2006. Elastomeric parts for parenterals and for devices for pharmaceutical use. Biological requirements and test methods
BS EN ISO 17201-2:2006 BS EN ISO 17201-2:2006. Acoustics. Noise from shooting ranges. Estimation of muzzle blast and projectile sound by calculation
BS EN ISO 17201-4:2006 BS EN ISO 17201-4:2006. Acoustics. Noise from shooting ranges. Prediction of projectile sound
06/30114826 DC 06/30114826 DC. BS ISO 20906. Acoustics. Continuous airport noise monitoring
BS ISO 5130:2007 BS ISO 5130:2007. Acoustics. Measurements of sound pressure level emitted by stationary road vehicles
BS ISO/IEC 15444-2:2004 BS ISO/IEC 15444-2:2004. Information technology. JPEG 2000 image coding system. Extensions
BS EN ISO 1183-2:2004 BS EN ISO 1183-2:2004. Plastics. Methods for determining the density of non-cellular plastics. Density gradient column method
04/30114840 DC 04/30114840 DC. EN 62020 AMD 2. Electrical accessories. Residual current monitors for household and similar uses (RCMs)
BS ISO 22155:2005 BS ISO 22155:2005. Soil quality. Gas chromatographic quantitative determination of volatile aromatic and halogenated hydrocarbons and selected ethers. Static headspace method
BS ISO 17380:2004 BS ISO 17380:2004. Soil quality. Determination of total cyanide and easily released cyanide. Continuous-flow analysis method
05/30114880 DC 05/30114880 DC. BS EN 15171. Characterization of sludges. Determination of adsorbable organically bound halogens
BS EN ISO 16708:2006 BS EN ISO 16708:2006. Petroleum and natural gas industries. Pipeline transportation systems. Reliability-based limit state methods
BS EN 13631-3:2004 BS EN 13631-3:2004. Explosives for civil uses. High explosives. Determination of sensitiveness to friction of explosives
BS EN 13631-16:2004 BS EN 13631-16:2004. Explosives for civil uses. High explosives. Detection and measurement of toxic gases
BS EN 13763-26:2004 BS EN 13763-26:2004. Explosives for civil uses. Detonators and relays. Definitions, methods and requirements for devices and accessories for reliable and safe functioning of detona
BS EN 13938-5:2004 BS EN 13938-5:2004. Explosives for civil uses. Propellants and rocket propellants. Determination of voids and fissures
BS EN 13938-7:2004 BS EN 13938-7:2004. Explosives for civil uses. Propellants and rocket propellants. Determination of properties of black powder
BS EN 13672:2004 BS EN 13672:2004. Surfaces for sports areas. Determination of resistance to abrasion of non-filled synthetic turf
BS EN 61029-2-11:2003 BS EN 61029-2-11:2003. Safety of transportable motor-operated tools. Particular requirements for combined mitre and bench saws
BS EN 10079:2007 BS EN 10079:2007. Definition of steel products
BS EN ISO 10942:2006 BS EN ISO 10942:2006. Ophthalmic instruments. Direct ophthalmoscopes
BS EN ISO 10943:2006 BS EN ISO 10943:2006. Ophthalmic instruments. Indirect ophthalmoscopes
ISO/TR20824 : 2007 EDTN1 ISO/TR20824 : 2007 EDTN1. ISO 20824 Ophthalmic instruments - Background for light hazard specification in ophthalmic instrument standards
BS EN ISO 11979-10:2006 BS EN ISO 11979-10:2006. Ophthalmic implants. Intraocular lenses. Phakic intraocular lenses
ISO1701-1 : 2004 EDTN1 ISO1701-1 : 2004 EDTN1 . ISO1701-1 : 2004 Test conditions for milling machines with table of variable height - Testing of the accuracy. Part 1: Machines with horizontal spindle
ISO1701-2 : 2004 EDTN2 ISO1701-2 : 2004 EDTN2 . ISO1701-2 : 2004 Test conditions for milling machines with table of variable height - Testing of accuracy. Part 2: Machines with vertical spindle
BS EN 14035-6:2004 BS EN 14035-6:2004. Fireworks. Bengal flames. Specification and test methods
BS EN 14035-7:2004 BS EN 14035-7:2004. Fireworks. Bengal matches. Specification and test methods
BS EN 14035-22:2004 BS EN 14035-22:2004. Fireworks. Mines. Specification and test methods
BS EN 14035-24:2004 BS EN 14035-24:2004. Fireworks. Novelty matches. Specification and test methods
BS EN 14035-29:2004 BS EN 14035-29:2004. Fireworks. Serpents. Specification and test methods
BS EN 14035-36:2004 BS EN 14035-36:2004. Fireworks. Wheels. Specification and test methods
PD EN 14035-3:2004 PD EN 14035-3:2004. Fireworks. Aerial wheels. Specification and test methods
PD EN 14035-8:2004 PD EN 14035-8:2004. Fireworks. Bengal sticks. Specification and test methods
PD EN 14035-9:2004 PD EN 14035-9:2004. Fireworks. Crackling granules. Specification and test methods
PD EN 14035-10:2004 PD EN 14035-10:2004. Fireworks. Double bangers. Specification and test methods
PD EN 14035-17:2004 PD EN 14035-17:2004. Fireworks. Ground spinners. Specification and test methods
BS EN 14603:2004 BS EN 14603:2004. Information technology. Alphanumeric glyph image set for optical character recognition OCR-B. Shapes and dimensions of the printed image
BS EN 14867:2005 BS EN 14867:2005. Packaging. Plastic freezer bags. Specifications and test methods
BS EN ISO 14819-6:2006 BS EN ISO 14819-6:2006. Traffic and traveller information (TTI). TTI messages via traffic message coding. Encryption and conditional access for the radio data system. Traffic me
BS EN 14175-6:2006 BS EN 14175-6:2006. Fume cupboards. Variable air volume fume cupboards
BS EN 1963:2007 BS EN 1963:2007. Textile floor coverings. Tests using the Lisson Tretrad machine
BS EN 62273-1:2007 BS EN 62273-1:2007. Methods of measurement for radio transmitters. Performance characteristics of terrestrial digital television transmitters
BS ISO 13737:2004, BS 2000-527:2004 BS ISO 13737:2004, BS 2000-527:2004. Method of test for petroleum and its products. BS 2000-527. Petroleum products and lubricants. Determination of low-temperature
BS EN 62272-2:2007 BS EN 62272-2:2007. Digital radio mondiale (DRM). Digital radio in the bands below 30 MHz. Methods of measurement for DRM transmitters
BS EN 60794-5:2007 BS EN 60794-5:2007. Optical fibre cables. Sectional specification. Microduct cabling for installation by blowing
BS EN 60793-1-49:2006 BS EN 60793-1-49:2006. Optical fibres. Measurement methods and test procedures. Differential mode delay
BS ISO/IEC 14764:2006 BS ISO/IEC 14764:2006. Software engineering. Software life cycle processes. Maintenance
BS ISO/IEC 16085:2004 BS ISO/IEC 16085:2004. Information technology. Software life cycle processes. Risk management
BS EN 50412-2-1:2005 BS EN 50412-2-1:2005. Power line communication apparatus and systems used in low-voltage installations in the frequency range 1,6 MHz to 30 MHz. Residential, commercial and indust
BS ISO 23671:2006 BS ISO 23671:2006. Passenger car tyres. Method for measuring relative wet grip performance. Loaded new tyres
BS EN 13025-1:2005 BS EN 13025-1:2005. Packaging. Light gauge metal containers. Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40000 ml
BS EN 13025-2:2005 BS EN 13025-2:2005. Packaging. Light gauge metal containers. Non-removable head (tight head) round steel and tinplate containers with a nominal capacity of 20000 ml, 25000 ml and 30
BS EN 13025-3:2005 BS EN 13025-3:2005. Packaging. Light gauge metal containers. Removable head (open head) round steel and tinplate containers with a no minal capacity of 20000 ml, 25000 ml and 30000
BS EN ISO 1265:2007 BS EN ISO 1265:2007. Plastics. Poly(vinyl chloride) resins. Determination of number of impurities and foreign particles
BS ISO 31-1:1992 BS ISO 31-1:1992. Quantities and units. Space and time
BS ISO 31-2:1992 BS ISO 31-2:1992. Quantities and units. Periodic and related phenomena
BS ISO 31-3:1992 BS ISO 31-3:1992. Quantities and units. Mechanics
BS ISO 31-4:1992 BS ISO 31-4:1992. Quantities and units. Heat
BS ISO 31-5:1992 BS ISO 31-5:1992. Quantities and units. Electricity and magnetism
BS ISO 31-6:1992 BS ISO 31-6:1992. Quantities and units. Light and related electromagnetic radiations
BS ISO 31-7:1992 BS ISO 31-7:1992. Quantities and units. Acoustics
BS ISO 31-8:1992 BS ISO 31-8:1992. Quantities and units. Physical chemistry and molecular physics
BS ISO 31-9:1992 BS ISO 31-9:1992. Quantities and units. Atomic and nuclear physics
BS ISO 31-10:1992 BS ISO 31-10:1992. Quantities and units. Nuclear reactions and ionizing radiations
BS ISO 31-11:1992 BS ISO 31-11:1992. Quantities and units. Mathematical signs and symbols for use in the physical sciences and technology
BS ISO 31-12:1992 BS ISO 31-12:1992. Quantities and units. Characteristic numbers
BS ISO 31-13:1992 BS ISO 31-13:1992. Quantities and units. Solid state physics
BS ISO 1000:1992 BS ISO 1000:1992. SI units and recommendations for the use of their multiples and of certain other units
BS ISO 21750:2006 BS ISO 21750:2006. Road vehicles. Safety enhancement in conjunction with tyre inflation pressure monitoring
BIP 3014:2004 BIP 3014:2004. ISO 9000 Quality Management. Achieving Registration
BS 6093:2006 BS 6093:2006. Design of joints and jointing in building construction. Guide
ISO20242-1 : 2005 EDTN 1 ISO20242-1 : 2005 EDTN 1. ISO20242-1 : 2005 Industrial automation systems and integration - Service interface for testing applications. Part 1: Overview
BS EN ISO 14731:2006 BS EN ISO 14731:2006. Welding coordination. Tasks and responsibilities
ISO/IEC14776-150 : 2004 EDTN1 ISO/IEC14776-150 : 2004 EDTN1. ISO/IEC14776-150 Information technology -- Small Computer System Interface (SCSI) -- . Part 150: Serial Attached SCSI (SAS)
ISO/IEC14776-222 : 2005 EDTN 1 ISO/IEC14776-222 : 2005 EDTN 1. ISO/IEC14776-222 : 2005 Information technology - Small Computer System Interface (SCSI) . Part 222: Fibre Channel Protocol for SCSI, Seco
BS ISO 19579:2006 BS ISO 19579:2006. Solid mineral fuels. Determination of sulfur by IR spectrometry
BS EN 13636:2004 BS EN 13636:2004. Cathodic protection of buried metallic tanks and related piping
BSISO/IECTR14496-9 : 04(CD-ROM) BSISO/IECTR14496-9 : 04(CD-ROM). BSISO/IECTR14496-9 : 2004 Information technology - Coding of audio-visual objects. Part 9 : Reference Hardware Description
BS EN 62339-1:2007 BS EN 62339-1:2007. Modular component interfaces for surface-mount fluid distribution components. Elastomeric seals
04/30115337 DC 04/30115337 DC. ISO 666. Machine tools. Mounting of grinding wheels by means of hub flanges
BS EN ISO 2810:2004 BS EN ISO 2810:2004. Paints and varnishes. Natural weathering of coatings. Exposure and assessment
04/30115348 DC 04/30115348 DC. IEC 61047 AMD 1. ED 2. Specification for d.c. or a.c. supplied electronic step-down convertors for filament lamps. Performance requirements
BS ISO 15261:2004 BS ISO 15261:2004. Vibration and shock generating systems. Vocabulary
BS EN ISO 3715-2:2002 BS EN ISO 3715-2:2002. Ships and marine technology. Propulsion plants for ships. Vocabulary for controllable-pitch propeller plants
BS EN ISO 11979-9:2006 BS EN ISO 11979-9:2006. Ophthalmic implants. Intraocular lenses. Multifocal intraocular lenses
BS EN ISO 15547-1: 2005 BS EN ISO 15547-1: 2005. Petroleum, petrochemical and natural gas industries. Plate-type heat exchangers. Plate-and-frame heat exchangers
BS EN ISO 15547-2:2005 BS EN ISO 15547-2:2005. Petroleum, petrochemical and natural gas industries. Plate-type heat exchangers. Brazed aluminium plate-fin heat exchangers
BS ISO 16873:2002 BS ISO 16873:2002. Hydraulic fluid power. Pressure switches. Mounting surfaces
ISO7240-13 : 2005 EDTN1 ISO7240-13 : 2005 EDTN1. ISO7240-13 : 2005 Fire detection and alarm systems -. Part 13: Compatibility assessment of system components
ISO7240-21 : 2005 EDTN1 ISO7240-21 : 2005 EDTN1. ISO7240-21 : 2005 Fire detection and alarm systems. Routing equipment
BS EN 1860-2:2005 BS EN 1860-2:2005. Appliances, solid fuels and firelighters for barbecueing. Barbecue charcoal and barbecue charcoal briquettes. Requirements and test methods
06/30115482 DC 06/30115482 DC. ISO 25537. Glass in building. Silvered flat glass mirror
BS EN 1739:2007 BS EN 1739:2007. Determination of shear strength for in-plane forces of joints between prefabricated components of autoclaved aerated concrete or lightweight aggregate concrete with op
BS EN 14983:2007 BS EN 14983:2007. Explosion prevention and protection in underground mines. Equipment and protective systems for firedamp drainage
BS EN 14986:2007 BS EN 14986:2007. Design of fans working in potentially explosive atmospheres
BS EN 14952:2005 BS EN 14952:2005. Surfaces for sports areas. Determination of water absorption of unbound minerals
BS EN 14953:2005 BS EN 14953:2005. Surfaces for sport areas. Determination of thickness of unbound mineral surfaces for outdoor sports areas
BS ISO 14835-1:2005 BS ISO 14835-1:2005. Mechanical vibration and shock. Cold provocation tests for the assessment of peripheral vascular function. Measurement and evaluation of finger skin temperatur
BS EN 14954:2005 BS EN 14954:2005. Surfaces for sports areas. Determination of hardness of natural turf and unbound mineral surfaces for outdoor sports areas
BS EN 14955:2005 BS EN 14955:2005. Surfaces for sports areas. Determination of composition and particle shape of unbound mineral surfaces for outdoor sports areas
BS EN 14956:2005 BS EN 14956:2005. Surfaces for sports areas. Determination of water content of unbound mineral surfaces for outdoor sports areas
PD ISO/TR 19122:2004 PD ISO/TR 19122:2004. Geographic information/Geomatics. Qualification and certification of personnel
BS EN 14978:2006 BS EN 14978:2006. Laminate floor coverings. Elements with acrylic based surface layer, electron beam cured. Specifications, requirements and test methods
BS EN 61131-2:2003 BS EN 61131-2:2003. Programmable controllers. Equipment requirements and tests
BS EN ISO 15001:2004 BS EN ISO 15001:2004. Anaesthetic and respiratory equipment. Compatibility with oxygen
ISO/TR17671-7 : 2004 EDTN1 ISO/TR17671-7 : 2004 EDTN1. ISO/TR17671-7 : 2004 Welding -- Recommendations for welding of metallic materials --. Part 7 : Electron beam welding
BS EN 60749-16:2003 BS EN 60749-16:2003. Semiconductor devices. Mechanical and climatic test methods. Particle impact noise detection (PIND)
ISO/TR17671-6 : 2005 EDTN1 ISO/TR17671-6 : 2005 EDTN1. ISO/TR17671-6 : 2005 Welding - Recommendations for welding of metallic materials -. Part 6 : Laser beam welding
BS EN 1071-2:2002 BS EN 1071-2:2002. Advanced technical ceramics. Methods of test for ceramic coatings. Determination of coating thickness by the crater grinding method
BS ISO 13300-1:2006 BS ISO 13300-1:2006. Sensory analysis. General guidance for the staff of a sensory evaluation laboratory. Staff responsibilities
PD IEC/PAS 60099-7:2004 PD IEC/PAS 60099-7:2004. Surge arresters. Glossary of terms and definitions from IEC publications 60099-1, 60099-4, 60099-6, 61643-1, 61643-12, 61643-21, 61643-311, 61643-321,
BS ISO 8332:2006 BS ISO 8332:2006. Rubber compounding ingredients. Sulfur. Methods of test
BS ISO 21561:2005 BS ISO 21561:2005. Styrene-butadiene rubber (SBR). Determination of the microstructure of solution-polymerized SBR
04/30115596 DC 04/30115596 DC. ISO 20299-2. Film for wrapping rubber bales. Part 2. Natural rubber
BS EN 13020:2004 BS EN 13020:2004. Road surface treatment machines. Safety requirements
BS EN 50377-7-1:2004 BS EN 50377-7-1:2004. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Type LC-PC duplex terminated on IEC 607
BS EN 671-2:2001 BS EN 671-2:2001. Fixed fire fighting systems. Hose systems. Hose systems with lay-flat hose
BS EN 12875-4:2006 BS EN 12875-4:2006. Mechanical dishwashing resistance of utensils. Rapid test for domestic ceramic articles
ISO15201 : 2006 EDTN1 ISO15201 : 2006 EDTN1. ISO 15201 Zinc and zinc alloys - Castings - Specifications
WD/ISO22200 : 2006 EDTN1 WD/ISO22200 : 2006 EDTN1. ISO22200 : 2006 Electromagnetic compatibility . Product family standards of lifts, escalators and moving walks - Immunity
ISO22199 : 2006 EDTN1 ISO22199 : 2006 EDTN1. ISO22199 : 2006 Electromagnetic compatibility . Product family standards for lifts, escalators and moving walks - Emission
PD CEN/TR 15134:2005 PD CEN/TR 15134:2005. Non-destructive testing. Automated ultrasonic examination. Selection and application of systems
BS EN 12875-5:2006 BS EN 12875-5:2006. Mechanical dishwashing resistance of utensils. Rapid test for ceramic catering articles
BS ISO 363-2:2006 BS ISO 363-2:2006. Textile machinery and accessories. Flat steel healds with closed end loops. Dimensions of healds manufactured of hardened strip steel
BS EN 14975:2006 BS EN 14975:2006. Loft ladders. Requirements, marking and testing
BS EN 957-1:2005 BS EN 957-1:2005. Stationary training equipment. General safety requirements and test methods
BS EN 60749-29:2003 BS EN 60749-29:2003. Semiconductor devices. Mechanical and climatic test methods. Latch-up test
BS EN 60749-17:2003 BS EN 60749-17:2003. Semiconductor devices. Mechanical and climatic test methods. Neutron irradiation
BS EN 60749-18:2003 BS EN 60749-18:2003. Semiconductor devices. Mechanical and climatic test methods. Ionizing radiation (total dose)
BS ISO 856:2006 BS ISO 856:2006. Oil of peppermint (Mentha x piperita L.)
DD IEC/TS 60034-17:2006 DD IEC/TS 60034-17:2006. Rotating electrical machines. Cage induction motors when fed from converters. Application guide
BS EN 60034-26:2006 BS EN 60034-26:2006. Rotating electrical machines . Effects of unbalanced voltages on the performance of three-phase induction motors
BS ISO 8829-2:2006 BS ISO 8829-2:2006. Aerospace. Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies. Non-metallic braid
BS IEC 61225:2005 BS IEC 61225:2005. Nuclear power plants. Instrumentation and control systems important to safety. Requirements for electrical supplies
ISO22157-1 : 2004 EDTN1 (R08) ISO22157-1 : 2004 EDTN1 (R08). ISO22157-1 : 2004 Bamboo -- Determination of physical and mechanical properties --. Part 1: Requirements
BS EN ISO 9046:2004 BS EN ISO 9046:2004. Building construction. Jointing products. Determination of adhesion/cohesion properties of sealants at constant temperature
BS EN 14987:2006 BS EN 14987:2006. Plastics. Evaluation of disposability in waste water treatment plants. Test scheme for final acceptance and specifications
BS ISO/IEC 15476-3:2006 BS ISO/IEC 15476-3:2006. Information technology. CDIF semantic metamodel. Data definitions
04/30115788 DC 04/30115788 DC. ISO/IEC PAS 20886. Information technology. International security, trust, and privacy alliance. Privacy framework
BS EN ISO 13433:2006 BS EN ISO 13433:2006. Geosynthetics. Dynamic perforation test (cone drop test)
BS ISO 16063-15:2006 BS ISO 16063-15:2006. Methods for the calibration of vibration and shock transducers. Primary angular vibration calibration by laser interferometry
BS 5250:2002 BS 5250:2002. Code of practice for control of condensation in buildings
BS EN 1365-5:2004 BS EN 1365-5:2004. Fire resistance tests for loadbearing elements. Balconies and walkways
DD CEN ISO/TS 20836:2005 DD CEN ISO/TS 20836:2005. Microbiology of food and animal feeding stuffs. Polymerase chain reaction (PCR) for the detection of food-borne pathogens. Performance testing of the
BS ISO 23038:2006 BS ISO 23038:2006. Space systems. Space solar cells. Electron and proton irradiation test methods
BS EN 1365-6:2004 BS EN 1365-6:2004. Fire resistance tests for loadbearing elements. Stairs
BS EN 1366-6:2004 BS EN 1366-6:2004. Fire resistance tests for service installations. Raised access and hollow core floors
PD ISO/TR 17766:2005 PD ISO/TR 17766:2005. Centrifugal pumps handling viscous liquids. Performance corrections
BS PL 4:2005 BS PL 4:2005. Properties of unsaturated polyester resins for low pressure laminating of high strength fibre reinforced composites. Specification
BS PL 5:2005 BS PL 5:2005. Unsaturated polyester resins for low pressure laminating of high strength fibre reinforced composites. Test methods
BS PL 6:2005 BS PL 6:2005. Properties of unsaturated polyester resins for low pressure laminating of glass fibre reinforced composites. Specification
BS PL 7:2005 BS PL 7:2005. Unsaturated polyester resins for low pressure laminating of glass fibre reinforced laminates. Test methods
BS PL 8:2005 BS PL 8:2005. Fibrous polyamide material for use as an explosion suppressant and as a baffle material in aircraft fuel tanks. Specification
BS PL 9:2005 BS PL 9:2005. Fibrous polyamide material for use as an explosion suppressant and as a baffle material in aircraft fuel tanks. Test methods
BS EN 62359:2005 BS EN 62359:2005. Ultrasonics. Field characterization. Test methods for the determination of thermal and mechanical indices related to medical diagnostic ultrasonic fields
WD/ISO/IEC14496-3 : 2004 EDTN2 WD/ISO/IEC14496-3 : 2004 EDTN2.
04/30115996 DC 04/30115996 DC. EN 61029-2-9:2002/prAB. Safety of transportable motor-operated electric tools. Part 2-9. Particular requirements for mitre saws
PP 7321:2004 PP 7321:2004. Design and Technology. Compendium of British Standards for teachers of design and technology in schools and colleges
BS EN 13617-2:2004 BS EN 13617-2:2004. Petrol filling stations. Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers
BIP 2045:2004 BIP 2045:2004. The Corporate Responsibility Code Book
BS EN 1854:2006 BS EN 1854:2006. Pressure sensing devices for gas burners and gas burning appliances
BS EN 14988-1:2006 BS EN 14988-1:2006. Children's high chairs. Safety requirements
BS EN 14988-2:2006 BS EN 14988-2:2006. Children's highchairs. Test methods
KIT 140 KIT 140. PD 7974 series and BS 7974. Fire safety engineering principles for the design of buildings
KIT 141 KIT 141. PD 7974 series. Fire safety engineering principles for the design of buildings
KIT 139 KIT 139. Design of fire detection installations for dwellings kit
BIP 2044:2004 BIP 2044:2004. The Design of Fire Detection Installations for Dwellings. A Guide to BS 5839-6:2004
BS EN 61241-4:2006 BS EN 61241-4:2006. Electrical apparatus for use in the presence of combustible dust. Type of protection "pD"
BS EN ISO 9445:2006 BS EN ISO 9445:2006. Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths. Tolerances on dimensions and form
BS EN 61347-2-12:2005 BS EN 61347-2-12:2005. Lamp controlgear. Particular requirements for d.c. or a.c. supplied electronic Ballasts for discharge lamps (excluding fluorescent lamps)
BS EN 13742-1:2004 BS EN 13742-1:2004. Irrigation techniques. Solid set sprinkler systems. Selection, design, planning and installation
BS EN 13742-2:2004 BS EN 13742-2:2004. Irrigation techniques. Solid set sprinkler systems. Test methods
ISO4952 : 2006 EDTN3 ISO4952 : 2006 EDTN3. ISO 4952 Structural steels with improved atmospheric corrosion resistance
BS EN 61326-2-5:2006 BS EN 61326-2-5:2006. Electrical equipment for measurement, control and laboratory use. EMC requirements. Particular requirements . Test configurations, operational conditions and
BS EN 60335-2-97:2006 BS EN 60335-2-97:2006. Household and similar electrical appliances. Safety. Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment
BS EN 60216-4-1:2006 BS EN 60216-4-1:2006. Electrical insulating materials. Thermal endurance properties. Ageing ovens. Single-chamber ovens
04/30116255 DC 04/30116255 DC. IEC 60695-1-12. Fire hazard testing. Part 1-12. Guidance for assessing the fire hazard of electrotechnical products. Fire safety engineering
BS ISO 10378:2005 BS ISO 10378:2005. Copper, lead and zinc sulfide concentrates. Determination of gold and silver. Fire assay gravimetric and flame atomic absorption spectrometric method
BS ISO 20826:2006 BS ISO 20826:2006. Automotive LPG components. Containers
BS ISO 23081-1:2006 BS ISO 23081-1:2006. Information and documentation. Records management processes. Metadata for records. Principles
PAS 1188-3:2003 PAS 1188-3:2003. Flood protection products. Specification. Building skirt systems
KIT 142 KIT 142. Code of practice for pipelines kit
BS EN 1309-2:2006 BS EN 1309-2:2006. Round and sawn timber. Method of measurement of dimensions. Round timber. Requirements for measurement and volume calculation rules
BS EN ISO 10087:2006 BS EN ISO 10087:2006. Small craft. Craft identification. Coding system
PD CLC/TR 50126-3:2006 PD CLC/TR 50126-3:2006. Railway applications. The specification and demonstration of reliability, availability, maintainability and safety (RAMS). Guide to the application of EN
BS EN 71-11:2005 BS EN 71-11:2005. Safety of toys. Organic chemical compounds. Methods of analysis
BS EN 62317-4:2005 BS EN 62317-4:2005. Ferrite cores. Dimensions. RM-cores and associated parts
BS EN 13129-2:2004 BS EN 13129-2:2004. Railway applications. Air conditioning for main line rolling stock. Type tests
BS EN ISO 19054:2006 BS EN ISO 19054:2006. Rail systems for supporting medical equipment
BS EN ISO 11140-4:2007 BS EN ISO 11140-4:2007. Sterilization of health care products. Chemical indicators. Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam p
BS ISO 11140-5:2007 BS ISO 11140-5:2007. Sterilization of health care products. Chemical indicators. Class 2 indicators for Bowie and Dick-type air removal tests
BS EN 14887:2005 BS EN 14887:2005. Glass packaging. Cork removal devices. General requirements
BS EN 606:2004 BS EN 606:2004. Bar coding. Transport and handling labels for steel products
BS EN ISO 7088:2005 BS EN ISO 7088:2005. Fish-meal. Vocabulary
BS ISO 1738:2004 BS ISO 1738:2004. Butter. Determination of salt content
BS EN ISO 14644-7:2004 BS EN ISO 14644-7:2004. Cleanrooms and associated controlled environments. Separative devices (clean air hoods, gloveboxes, isolators and mini-environments)
BS EN 14995:2006 BS EN 14995:2006. Plastics. Evaluation of compostability. Test scheme and specifications
BS EN ISO 14644-5:2004 BS EN ISO 14644-5:2004. Cleanrooms and associated controlled environments. Operations
ISO13899-2 : 2005 EDTN1 ISO13899-2 : 2005 EDTN1. ISO13899-2 : 2005 Steel - Determination of Mo, Nb and W contents in alloyed steel - Inductively coupled plasma atomic emission spectrometric method Par
BS ISO 13899-2:2005 BS ISO 13899-2:2005. Steel. Determination of Mo, Nb and W contents in alloyed steel. Inductively coupled plasma atomic emission spectrometric method. Determination of Nb Content
DD ISO/TS 13899-3:2005 DD ISO/TS 13899-3:2005. Steel. Determination of Mo, Nb and W contents in alloyed steel. Inductively coupled plasma atomic emission spectrometric method . Determination of W cont
BS ISO 17053:2005 BS ISO 17053:2005. Steel and iron. Determination of oxygen. Infrared method after fusion under inert gas
BS EN ISO 13355:2003 BS EN ISO 13355:2003. Packaging. Complete, filled transport packages and unit loads. Vertical random vibration test
BS ISO 16673:2007 BS ISO 16673:2007. Road vehicles. Ergonomic aspects of transport information and control systems. Occlusion method to assess visual demand due to the use of in-vehicle systems
BS EN 15056:2006 BS EN 15056:2006. Cranes. Requirements for container handling spreaders
BS EN ISO 5999:2004 BS EN ISO 5999:2004. Polymeric materials, cellular flexible. Polyurethane foam for load-bearing applications excluding carpet underlay. Specification
BS ISO 13322-2:2006 BS ISO 13322-2:2006. Particle size analysis. Image analysis methods. Dynamic image analysis methods
BS ISO 20252:2006 BS ISO 20252:2006. Market, opinion and social research. Vocabulary and service requirements
PD ISO/TR 11071-1:2004 PD ISO/TR 11071-1:2004. Comparison of worldwide lift safety standards. Electric lifts (elevators)
BS ISO 3086:2006 BS ISO 3086:2006. Iron ores. Experimental methods for checking the bias of sampling
BS EN 61326-2-6:2006 BS EN 61326-2-6:2006. Electrical equipment for measurement, control and laboratory use. EMC requirements. Particular requirements. In vitro diagnostic (IVD) medical equipment
KIT 144 KIT 144. Fire classification, testing and fire safety vocabulary kit
BS EN 14894:2006 BS EN 14894:2006. LPG equipment and accessories. Cylinder and drum marking
BS EN 14893:2006 BS EN 14893:2006. LPG equipment and accessories. Transportable liquefied petroleum gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1000 litres
BS EN 1007-4:2004 BS EN 1007-4:2004. Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements. Determination of tensile properties of filaments at ambient temperature
BS ISO 14400:2005 BS ISO 14400:2005. Road vehicles. Wheels and rims. Use, general maintenance and safetyrequi rements and out-of-service conditions
BS 7346-7:2006 BS 7346-7:2006. Components for smoke and heat control systems. Code of practice on functional recommendations and calculation methods for smoke and heat control systems for covered car
BS EN 61300-2-33:2007 BS EN 61300-2-33:2007. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Assembly and disassembly of fibre optic closures
BS EN 61300-2-37:2007 BS EN 61300-2-37:2007. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Cable bending for fibre optic closures
BS EN 61300-2-38:2006 BS EN 61300-2-38:2006. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Sealing for pressurized fibre optic closures
BS EN 1996-1-2:2005 BS EN 1996-1-2:2005. Eurocode 6. Design of masonry structures. General rules. Structural fire design
BS EN 12927-7:2004 BS EN 12927-7:2004. Safety requirments for cableways installations designed to carry persons. Ropes. Inspection, repair and maintenance
BS ISO 6611:2004 BS ISO 6611:2004. Milk and milk products. Enumeration of colony-forming units of yeasts and/or moulds. Colony-count technique at 25°C
BS ISO 2920:2004 BS ISO 2920:2004. Whey cheese. Determination of dry matter (Reference method)
BS EN 12927-5:2004 BS EN 12927-5:2004. Safety requirements for cableway installations designed to carry person. Ropes. Storage, transportation, installation and tensioning
BS EN 12927-1:2004 BS EN 12927-1:2004. Safety requirements for cableways installation designed to carry persons. Ropes. Selection criteria for ropes and their end fixing
BS EN 12929-2:2004 BS EN 12929-2:2004. Safety requirements for cableways installations designed to carry persons. General requirements. Additional requirements for reversible bi-cable aerial ropeways
BS EN 12408:2004 BS EN 12408:2004. Safety requirements for cableways installations designed to carry person. Quality control
BS EN 12397:2004 BS EN 12397:2004. Safety requirements for Cableway installations designed to carry persons. Operation
BS EN 1709:2004 BS EN 1709:2004. Safety requirements for cableways for cableway installations designed to carry persons. Precommissioning inspection, maintenance and operational inspection and checks
BS EN 13223:2004 BS EN 13223:2004. Safety requirements for cableways installations designed to carry persons. Drive systems and other mechanical equipment
BS EN 1908:2004 BS EN 1908:2004. Safety requirements for cableways installations designed to carry person. Tensionong Devices
BS EN 12930:2004 BS EN 12930:2004. Safety requirements for cableway installations designed to carry persons. Calculations
BS EN 12929-1:2004 BS EN 12929-1:2004. Safety requirements for cableways installation designed to carry persons. General requirements. Requirements for all installations
BS EN 12927-8:2004 BS EN 12927-8:2004. Safety requirements for cableways installation designed to carry persons. Ropes. Magnetic rope testing (MRT)
BS EN 12927-3:2004 BS EN 12927-3:2004. Safety requirements for cableways installation designed to carry persons. Ropes. Long splicing of 6 strand hauling, carrying hauling and towing ropes
BS EN 12927-4:2004 BS EN 12927-4:2004. Safety requirements for cableway installations designed to carry person. Ropes. End fixings
BS EN 12258-2:2004 BS EN 12258-2:2004. Aluminium and aluminium alloys. Terms and definitions. Chemical analysis
BS EN 12258-4:2004 BS EN 12258-4:2004. Aluminium and aluminium alloys. Terms and definitions. Residues of the aluminium industry
04/30116774 DC 04/30116774 DC. ISO/IEC 8802-3 AMD 3. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirements. C
04/30116776 DC 04/30116776 DC. ISO/IEC 8802-3 AMD 4. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirements. C
BS ISO/IEC 14882:2003 BS ISO/IEC 14882:2003. Programming languages. C++
DD CEN/TS 14997:2006 DD CEN/TS 14997:2006. Characterization of waste. Leaching behaviour tests. Influence of pH on leaching with continuous pH-control
BS EN 15002:2006 BS EN 15002:2006. Characterization of waste. Preparation of test portions from the laboratory sample
04/30116796 DC 04/30116796 DC. EN 15001-1. Gas supply systems. Gas installation pipework with an operating pressure greater than 0.5 bar for industrial, commercial and non-domestic installations. Part
BS ISO/IEC 19785-2:2006 BS ISO/IEC 19785-2:2006. Information technology. Common biometric exchange formats framework. Procedures for the operation of the biometric registration authority
04/30116818 DC 04/30116818 DC. ISO/IEC 9494-X AMD 3. Information technology. OSI. The Directory
BS ISO/IEC 11693:2005 BS ISO/IEC 11693:2005. Identification cards. Optical memory cards. General characteristics
BS ISO/IEC 11694-1:2005 BS ISO/IEC 11694-1:2005. Identification cards. Optical memory cards. Linear recording method. Physical characteristics
BS ISO/IEC 11694-2:2005 BS ISO/IEC 11694-2:2005. Identification cards. Optical memory cards. Linear recording method. Dimensions and location of the accessible optical area
BS EN 13544-1:2001 BS EN 13544-1:2001. Respiratory therapy equipment. Nebulizing systems and their components
BS ISO 12078:2006 BS ISO 12078:2006. Anhydrous milk fat. Determination of sterol composition by gas liquid chromatography (Reference method)
BS ISO 18252:2006 BS ISO 18252:2006. Anhydrous milk fat. Determination of sterol composition by gas liquid chromatography (Routine method)
BS EN 62153-4-7:2006 BS EN 62153-4-7:2006. Metallic communication cables test methods. Electromagnetic compatibility (EMC). Test method for measuring the transfer impedance and the screening, or the c
BS EN 175301-803:2006 BS EN 175301-803:2006. Detail specification: rectangular connectors. Flat contacts, 0,8 mm thickness, locking screw not detachable
ISO19092-1 : 2006 EDTN1 ISO19092-1 : 2006 EDTN1. ISO19092-1 : 2006 Financial services - Biometrics. Part 1 : Security framework
BS ISO 11884-1:2006 BS ISO 11884-1:2006. Optics and photonics. Minimum requirements for stereomicroscopes. Stereomicroscopes for general use
DD ISO/TS 15827:2007 DD ISO/TS 15827:2007. Road vehicles. Test procedures. Evaluating small female dummy arm and forearm interactions with driver frontal airbags and side airbags
BS EN 13119:2007 BS EN 13119:2007. Curtain walling. Terminology
PAS 60-1:2004 PAS 60-1:2004. Equipment used in the controlled removal of asbestos-containing materials. Controlled wetting of asbestos-containing materials. Specification
BS ISO 3408-4:2006 BS ISO 3408-4:2006. Ball screws. Static axial rigidity
BS ISO 3408-5:2006 BS ISO 3408-5:2006. Ball screws. Static and dynamic axial load ratings and operational life
PD ISO/TR 230-9:2005 PD ISO/TR 230-9:2005. Test code for machine tools. Estimation of measurement uncertainty for machine tool tests according to series ISO 230, basic equations
BS EN ISO 15652: 2005 BS EN ISO 15652: 2005. Small craft. Remote steering systems for inboard mini jet boats
BS ISO 22877:2004 BS ISO 22877:2004. Castors and wheels. Vocabulary, symbols and multilingual terminology
BS EN ISO 4618:2006 BS EN ISO 4618:2006. Paints and varnishes. Terms and definitions
PAS 60-2:2004 PAS 60-2:2004. Equipment used in the controlled removal of asbestos-containing materials. Negative Pressure Units. Specification
BS EN ISO 10417:2004 BS EN ISO 10417:2004. Petroleum and natural gas industries. Subsurface safety valve systems. Design, installation, operation and redress
04/30117014 DC 04/30117014 DC. ISO/IEC TR 15476-5. Information technology. CDIF semantic metamodel. Part 5. Dataflow models
ISO9709 : 2005 EDTN1 ISO9709 : 2005 EDTN1. ISO9709 : 2005 Structural timber - Visual strength grading - Basic principles
ISO13912 : 2005 EDTN1 ISO13912 : 2005 EDTN1. ISO13912 : 2005 Structural timber - Machine strength grading - Basic principles
BS EN 14564:2004 BS EN 14564:2004. Tanks for transport of dangerous goods. Terminology
KIT 145 KIT 145. Emergency lighting kit
BS EN 14994:2007 BS EN 14994:2007. Gas explosion venting protective systems
04/30117081 DC 04/30117081 DC. ISO 15818. Earth-moving machinery. Lifting and tying down devices
04/30117084 DC 04/30117084 DC. ISO 6015. Earth-moving machinery. Hydraulic excavators. Methods of determining tool forces
BS EN 62155:2003 BS EN 62155:2003. Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V
BS EN 1994-2:2005 BS EN 1994-2:2005. Eurocode 4. Design of composite steel and concrete structures. General rules and rules for bridges
BS EN 14617-1:2005 BS EN 14617-1:2005. Agglomerated stone. Test methods. Determination of apparent density and water absorption
BS EN 14617-10:2005 BS EN 14617-10:2005. Agglomerated stone. Test methods. Determination of chemical resistance
BS EN 14617-11:2005 BS EN 14617-11:2005. Agglomerated stone. Test methods. Determination of linear thermal expansion coefficient
BS EN 14617-12:2005 BS EN 14617-12:2005. Agglomerated stone. Test methods. Determination of dimensional stability
BS EN 14617-13:2005 BS EN 14617-13:2005. Agglomerated stone. Test methods. Determination of electrical resistivity
BS EN 14617-15:2005 BS EN 14617-15:2005. Agglomerated stone. Test methods. Determination of compressive strength
BS EN 14617-16:2005 BS EN 14617-16:2005. Agglomerated stone. Test methods. Determination of dimensions, geometric characteristics and surface quality of modular tiles
BS EN 14617-5:2005 BS EN 14617-5:2005. Agglomerated stone. Test methods. Determination of freeze and thaw resistance
BS EN 14617-4:2005 BS EN 14617-4:2005. Agglomerated stone. Test methods. Determination of abrasion resistance
BS EN 14617-6:2005 BS EN 14617-6:2005. Agglomerated stone. Test methods. Determination of thermal shock resistance
BS EN 14617-9:2005 BS EN 14617-9:2005. Agglomerated stone. Test methods. Determination of impact resistance
BS EN 14434:2004 BS EN 14434:2004. Writing boards for educational institutions. Ergonomic, technical and safety requirements and their test methods
BS EN 50441-1:2006 BS EN 50441-1:2006. Cables for indoor residential telecommunication installations. Unscreened cables. Grade 1
BS EN 50441-2:2006 BS EN 50441-2:2006. Cables for indoor residential telecommunication installations. Screened cables. Grade 2
BS EN 50441-3:2006 BS EN 50441-3:2006. Cables for indoor residential telecommunication installations. Screened cables. Grade 3
BS EN 50117-1:2002 BS EN 50117-1:2002. Coaxial cables. Generic specification
BS EN ISO 2719:2002, BS 2000-34:2002 BS EN ISO 2719:2002, BS 2000-34:2002. Determination of flash point. Pensky-Martens closed cup method
BS ISO/IEC 9796-3:2006 BS ISO/IEC 9796-3:2006. Information technology. Security techniques. Digital signature schemes giving message recovery. Discrete logarithm based mechanisms
BIP 2041:2004 BIP 2041:2004. Implementing Effective Corporate Social Responsibility and Corporate Governance. A Framework
BIP 2042:2004 BIP 2042:2004. Implementing Effective Corporate Social Responsibility and Corporate Governance. A Guide
BIP 2046:2005 BIP 2046:2005. Winning with Health and Safety. A Guide for business
BIP 2047:2006 BIP 2047:2006. Winning with fire safety. A Guide for business
BIP 2050:2004 BIP 2050:2004. Managing Safety the Systems Way
BIP 2051:2004 BIP 2051:2004. Safety at Work. 6th edition
BIP 2052 Presentation Set BIP 2052 Presentation Set. Occupational health & safety management systems. Standards & guidance presentation set
KIT 137 KIT 137. CSR. Effective implementation kit
BIP 3017:2004 BIP 3017:2004. Occupational Health and Safety (OH&S) Standards and Guidance CD-ROM
BIP 2040:2004 BIP 2040:2004. Winning with the Disability Discrimination Act. A Guide for Business
BS EN 14470-2:2006 BS EN 14470-2:2006. Fire safety storage cabinets. Safety cabinets for pressurised gas cylinders
BS ISO 21413:2005 BS ISO 21413:2005. Manual methods for the measurement of a groundwater level in a well
BS ISO 3534-1:2006 BS ISO 3534-1:2006. Statistics. Vocabulary and symbols. General statistical terms and terms used in probability
BS ISO 3534-2:2006 BS ISO 3534-2:2006. Statistics. Vocabulary and symbols. Applied statistics
06/30117277 DC 06/30117277 DC. ISO 9249. Earth-moving machinery. Engine test code. Net power
05/30117281 DC 05/30117281 DC. ISO 10265. Earth-moving machinery. Crawler machines. Performance requirements and test procedures for braking systems
BS ISO 16124:2004 BS ISO 16124:2004. Steel wire rod. Dimensions and tolerances
04/30117319 DC 04/30117319 DC. BS EN 60335-2-72. Household and similar electrical appliances. Safety. Part 2-72. Particular requirements for automatic machines for floor treatment for commercial and i
06/30117321 DC 06/30117321 DC. ISO 5660-4. Reaction-to-fire tests. Heat release, smoke production and mass loss rate. Part 4. Measurement of heat release for determination of low levels of combustibil
BS EN ISO 18757:2005 BS EN ISO 18757:2005. Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of specific surface area of ceramic powders by gas adsorption using the BET met
BS EN ISO 18753:2005 BS EN ISO 18753:2005. Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of absolute density of ceramic powders by pyknometer
BS EN 725-8:2006 BS EN 725-8:2006. Advanced technical ceramics. Methods of test for ceramic powders. Determination of tapped bulk density
BS EN 725-9:2006 BS EN 725-9:2006. Advanced technical ceramics. Methods of test for ceramic powders. Determination of untapped bulk density
DD CEN/TS 1071-11:2005 DD CEN/TS 1071-11:2005. Advanced technical ceramics. Methods of test for ceramic coatings. Determination of internal stress by the Stoney formula
BS EN ISO 2812-1:2007 BS EN ISO 2812-1:2007. Paints and varnishes. Determination of resistance to liquids. Immersion in liquids other than water
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
