BIS Standards Catalogue
BS EN ISO 2812-2:2007 BS EN ISO 2812-2:2007. Paints and varnishes. Determination of resistance to liquids. Water immersion method
BS EN ISO 2812-3:2007 BS EN ISO 2812-3:2007. Paints and varnishes. Determination of resistance to liquids. Method using an absorbent medium
BS EN ISO 2812-4:2007 BS EN ISO 2812-4:2007. Paints and varnishes. Determination of resistance to liquids. Spotting methods
BS EN ISO 2812-5:2007 BS EN ISO 2812-5:2007. Paints and varnishes. Determination of resistance to liquids. Temperature-gradient oven method
BS EN 61937-4:2003 BS EN 61937-4:2003. Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958. Non-linear PCM bitstreams according to the MPEG audio format
BS ISO 18232:2006 BS ISO 18232:2006. Health informatics. Messages and communication. Format of length limited globally unique string identifiers
BS EN 61308:2006 BS EN 61308:2006. High-frequency dielectric heating installations. Test methods for the determination of power output
BS EN 14596:2005 BS EN 14596:2005. Tanks for transport of dangerous goods. Service equipment for tanks. Emergency pressure relief valve
BS EN 60076-13:2006 BS EN 60076-13:2006. Power transformers. Self-protected liquid-filled transformers
BS EN 14595:2005 BS EN 14595:2005. Tanks for transport of dangerous goods. Service equipment for tanks. Pressure and vacuum breather vent
BS EN 1983:2006 BS EN 1983:2006. Industrial valves. Steel ball valves
BS EN ISO 12156-1:2006 BS EN ISO 12156-1:2006. Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR). Test method
BS EN 14432:2006 BS EN 14432:2006. Tanks for the transport of dangerous goods. Tank equipment for the transport of liquid chemicals. Product discharge and air inlet valves
ISO/IEC19502 : 2005 EDTN1 ISO/IEC19502 : 2005 EDTN1. ISO/IEC19502 : 2005 Information technology - Meta Object Facility (MOF)
ISO/IEC19503 : 2005 EDTN1 ISO/IEC19503 : 2005 EDTN1. ISO/IEC19503 : 2005 Information technology - XML Metadata Interchange (XMI)
BS EN 14433:2006 BS EN 14433:2006. Tanks for the transport of dangerous goods. Tank equipment for the transport of liquid chemicals. Foot valves
BS EN 13722:2004 BS EN 13722:2004. Furniture. Assessment of the surface gloss
BS EN 60297-3-104:2006 BS EN 60297-3-104:2006. Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482,6mm(19 in) series. Connector dependent interface dimension
BS 7960:2005 BS 7960:2005. Door supervisors. Code of practice
BS EN 14512:2006 BS EN 14512:2006. Tanks for the transport of dangerous goods. Tank equipment for the transport of liquid chemicals. Hinged manhole cover and neckrings with pivoting bolts
BS EN 12972:2007 BS EN 12972:2007. Tanks for transport of dangerous goods. Testing, inspection and marking of metallic tanks
BS 8454:2006 BS 8454:2006. Code of practice for the delivery of training and education for work at height and rescue
PD EN 14035-13:2004 PD EN 14035-13:2004. Fireworks. Flash pellets. Specification and test methods
BS EN 13744:2004 BS EN 13744:2004. Surfaces for sports areas. Procedure for accelerated ageing by immersion in hot water
BS EN 13817:2004 BS EN 13817:2004. Surfaces for sports areas. Procedure for accelerated ageing by exposure to hot air
BS EN 60923:2005 BS EN 60923:2005. Auxiliaries for lamps. Ballasts for discharge lamps (excluding tubular fluorescent lamps). Performance requirements
06/30117543 DC 06/30117543 DC. ISO 7967-5. RIC engines. Vocabulary of components and subsystems. Part 5. Cooling systems
BS ISO 16172:2006 BS ISO 16172:2006. Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe
ISO9364 : 2006 EDTN3 ISO9364 : 2006 EDTN3. ISO 9364 Continuous hot-dip aluminium/zinc coated steel sheet of commercial, drawing and structural qualities
BS ISO 4999:2005 BS ISO 4999:2005. Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities
BS EN 10143:2006 BS EN 10143:2006. Continuously hot-dip coated steel sheet and strip. Tolerances on dimensions and shape
BS EN 13069:2005 BS EN 13069:2005. Chimneys. Clay/ceramic outer walls for system chimneys. Requirements and test methods
BS ISO 11228-3:2007 BS ISO 11228-3:2007. Ergonomics. Manual handling. Handling of low loads at high frequency
BS EN ISO 176:2005 BS EN ISO 176:2005. Plastics. Determination of loss of plasticizers. Activated carbon method
BIP 2049:2006 BIP 2049:2006. Winning with Food Safety. A Guide for business
BIP 2054:2004 BIP 2054:2004. Accident Book
BS IEC 60515:2007 BS IEC 60515:2007. Nuclear power plants. Instrumentation important to safety. Radiation detectors. Characteristics and test methods
BS EN 14023:2005 BS EN 14023:2005. Bitumen and bituminous binders. Framework specification for polymer modified bitumens
ISO3952-1 AMD1 (10/02) ISO3952-1 AMD1 (10/02) .
ISO4586-1 : 2004 EDTN5 ISO4586-1 : 2004 EDTN5. ISO4586-1 : 2004 High-pressure decorative laminates - Sheets made from thermosetting resins - . Part 1: Classification and specifications
ISO4586-2 : 2004 EDTN5 ISO4586-2 : 2004 EDTN5. ISO4586-2 : 2004 High-pressure decorative laminates - Sheets made from thermosetting resins - . Part 2: Determination of properties
BS ISO 13616-1:2007 BS ISO 13616-1:2007. Financial services. International bank account number (IBAN). Structure of the IBAN
BS ISO 13616-2:2007 BS ISO 13616-2:2007. Financial services. International bank account number (IBAN). Role and responsibilities of the registration authority
BS EN 12621:2006 BS EN 12621:2006. Machinery for the supply and circulation of coating materials under pressure. Safety requirements
BS EN 12757-1:2005 BS EN 12757-1:2005. Mixing machinery for coating materials. Safety requirements. Mixing machinery for use in vehicle refinishing
CWA 15044:2004 CWA 15044:2004. Test and evaluation of demining machines
BS EN 12581:2005 BS EN 12581:2005. Coating plants. Machinery for dip coating and electrodeposition of organic liquid coating material. Safety requirements
CWA 15043:2004 CWA 15043:2004. Proposal for a XML-based format for storage and exchange of design data in the footwear industry
CWA 15045:2004 CWA 15045:2004. Multilingual catalogue strategies for eCommerce and eBusiness
BS EN 12753:2005 BS EN 12753:2005. Thermal cleaning systems for exhaust gas from surface treatment equipment. Safety requirements
BS EN ISO 21469:2006 BS EN ISO 21469:2006. Safety of machinery. Lubricants with incidental product contact. Hygiene requirements
BS EN 12215:2004 BS EN 12215:2004. Coating plants. Spray booths for application of organic liquid coating materials. Safety requirements
BS EN 12921-1:2005 BS EN 12921-1:2005. Machines for surface cleaning and pretreatment of industrial items using liquids or vapours. Common safety requirements
PD ISO/IEC TR 18047-7:2005 PD ISO/IEC TR 18047-7:2005. Information technology. Radio frequency identification device conformance test methods. Test methods for air interface communications at 433 MHz
06/30117776 DC 06/30117776 DC. ISO 5296. Synchronous belt drives. Belts. Pitch codes MXL, XXL, XL, L, H, XH and XXH. Metric and inch dimensions
06/30117784 DC 06/30117784 DC. ISO 12046. Synchronous belt drives. Automotive belts. Determination of physical properties
BS EN 14992:2007 BS EN 14992:2007. Precast concrete products. Wall elements
BS EN 14991:2007 BS EN 14991:2007. Precast concrete products. Foundation elements
04/30117816 DC 04/30117816 DC. ISO/DIS 9393-2. Thermoplastics valves for industrial applications. Pressure test methods and requirements. Part 2. Test conditions and basic requirements
BS ISO 14594:2003 BS ISO 14594:2003. Microbeam analysis. Electron probe microanalysis. Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy
BS EN 14470-1:2004 BS EN 14470-1:2004. Fire safety storage cabinets. Safety storage cabinets for flammable liquids
BIP 3019:2004 BIP 3019:2004. Ethics and anti-corruption video set
BIP 3018 BIP 3018. Ethics and Anti-corruption DVD
BS EN 12859:2001 BS EN 12859:2001. Gypsum blocks. Definitions, requirements and test methods
BS ISO 14595:2003 BS ISO 14595:2003. Microbeam analysis. Electron probe microanalysis. Guidelines for the specification of certified reference materials (CRMs)
BS EN ISO 14814:2006 BS EN ISO 14814:2006. Road transport and traffic telematics. Automatic vehicle and equipment identification. Reference architecture and terminology
BS EN ISO 9100-1:2005 BS EN ISO 9100-1:2005. Glass containers. Vacuum lug finishes. General
BS EN ISO 9100-2:2005 BS EN ISO 9100-2:2005. Glass containers. Vacuum lug finishes. 33 medium
BS EN ISO 9100-3:2005 BS EN ISO 9100-3:2005. Glass containers. Vacuum lug finishes. 38 regular
BS EN ISO 9100-4:2005 BS EN ISO 9100-4:2005. Glass containers. Vacuum lug finishes. 38 medium
BS EN ISO 9100-5:2005 BS EN ISO 9100-5:2005. Glass containers. Vacuum lug finishes. 43 and 48 regular
BS EN ISO 9100-6:2005 BS EN ISO 9100-6:2005. Glass containers. Vacuum lug finishes. 53 and 58 regular
BS EN ISO 9100-7:2005 BS EN ISO 9100-7:2005. Glass containers. Vacuum lug finishes. 58 deep
BS ISO 13215-1:2006 BS ISO 13215-1:2006. Road vehicles. Reduction of misuse risk of child restraint systems. Forms for field studies
BS ISO 13216-2:2004 BS ISO 13216-2:2004. Road vehicles. Anchorages in vehicles and attachments to anchorages for child restraint systems. Top tether anchorages and attachments
BS EN ISO 9100-8:2005 BS EN ISO 9100-8:2005. Glass containers. Vacuum lug finishes. 63, 66 and 70 regular
BS ISO 13216-3:2006 BS ISO 13216-3:2006. Road vehicles. Anchorages in vehicles and attachments to anchorages for child restraint systems. Classification of child restraint dimensions and space in vehi
BS EN ISO 9100-9:2005 BS EN ISO 9100-9:2005. Glass containers. Vacuum lug finishes. 63, 66 and 70 deep
BS EN ISO 9100-10:2005 BS EN ISO 9100-10:2005. Glass containers. Vacuum lug finishes. 77 regular
BS EN ISO 9100-11:2005 BS EN ISO 9100-11:2005. Glass containers. Vacuum lug finishes. 82 regular
BS EN ISO 9100-12:2005 BS EN ISO 9100-12:2005. Glass containers. Vacuum lug finishes. 89 regular
BS EN ISO 9100-13:2005 BS EN ISO 9100-13:2005. Glass containers. Vacuum lug finishes. 100 regular
BS ISO 6621-5:2005 BS ISO 6621-5:2005. Internal combustion engines. Piston rings. Quality requirements
BS EN ISO 9100-14:2005 BS EN ISO 9100-14:2005. Glass containers. Vacuum lug finishes. 110 regular
PD ISO/PAS 20858:2004 PD ISO/PAS 20858:2004. Ships and marine technology. Maritime port facility security assessments and security plan development
PD ISO/TR 22588:2005 PD ISO/TR 22588:2005. Optics and photonics. Laser and laser-related equipment. Measurement and evaluation of absorption-induced effects in laser optical components
BS ISO 5943:2004 BS ISO 5943:2004. Cheese and processed cheese products. Determination of chloride content. Potentiometric titration method
BS ISO 3434:1992 BS ISO 3434:1992. Shipbuilding and marine structures. Heated glass panes for ships rectangular windows
BS EN 13084-6:2004 BS EN 13084-6:2004. Free-standing chimneys. Steel liners. Design and execution
BS ISO 21014:2006 BS ISO 21014:2006. Cryogenic vessels. Cryogenic insulation performance
BS ISO 21012:2006 BS ISO 21012:2006. Cryogenic vessels. Hoses
BS EN 13190:2001 BS EN 13190:2001. Dial thermometers
BS 6173:2001 BS 6173:2001. Specification for installation of gas-fired catering appliances for use in all types of catering establishments (2nd and 3rd family gases)
BS EN ISO 11807-1:2005 BS EN ISO 11807-1:2005. Integrated optics. Vocabulary. Basic terms and symbols
BS EN ISO 14881:2005 BS EN ISO 14881:2005. Integrated optics. Interfaces. Parameters relevant to coupling properties
BS ISO 22472:2006 BS ISO 22472:2006. Ships and marine technology. Guidelines for the installation and operation of voyage data recorders (VDR)
BS 8456:2005 BS 8456:2005. Code of practice for design and installation of directional sounder evacuation systems
BS EN 13284-2:2004 BS EN 13284-2:2004. Stationary source emissions. Determination of low range mass concentration of dust. Automated measuring systems
BS EN ISO 15265:2004 BS EN ISO 15265:2004. Ergonomics of the thermal environment. Risk assessment strategy for the prevention of stress or discomfort in thermal working conditions
BS EN ISO 14344:2005 BS EN ISO 14344:2005. Welding and allied processes. Flux and gas shielded electrical welding processes. Procurement guidelines for consumables
BS EN 1270:2005 BS EN 1270:2005. Playing field equipment. Basketball equipment. Functional and safety requirements, test methods
BS ISO 8008:2005 BS ISO 8008:2005. Aluminium oxide primarily used for the production of aluminium. Determination of specific surface area by nitrogen adsorption
04/30118285 DC 04/30118285 DC. ISO 15847. Graphic technology. Graphical symbols for printing press systems and finishing systems, including related auxiliary equipment
BS ISO 18116:2005 BS ISO 18116:2005. Surface chemical analysis. Guidelines for preparation and mounting of specimens for analysis
BS EN 15017:2005 BS EN 15017:2005. Funeral services. Requirements
BS EN 60806:2004 BS EN 60806:2004. Determination of the maximum symmetrical radiation field from a rotating anode X-ray tube for medical diagnosis
BS EN 60325:2004 BS EN 60325:2004. Radiation protection instrumentation. Alpha, beta and alpha/beta (beta energy $0G 60 keV) contamination meters and monitors
05/30118367 DC 05/30118367 DC. ISO 1496-1 AMD 4. Series 1 Freight containers. Specification and testing. Part 1. General cargo containers for general purposes
06/30118370 DC 06/30118370 DC. ISO 3874:1997 DAM 4. Series 1 freight containers. Handling and securing. 45 ft containers
BS ISO 18185-2:2007 BS ISO 18185-2:2007. Freight containers. Electronic seals. Application requirements
BS ISO 18185-3:2006 BS ISO 18185-3:2006. Freight containers. Electronic seals. Environmental characteristics
BS ISO 18185-4:2007 BS ISO 18185-4:2007. Freight containers. Electronic seals. Data protection
BS ISO 18185-5:2007 BS ISO 18185-5:2007. Freight containers. Electronic seals. Physical layer
BIP 2048:2004 BIP 2048:2004. Buildings and constructed assets: Service life planning. Part 5. Whole life costing (ISO DIS as BIP special)
BIP 2038:2004 BIP 2038:2004. Environmental Due Diligence. A Guide to ISO 14015: The role of environmental assessment in environmental due diligence
KIT 138 KIT 138. Environmental management life cycle assessment standards kit
BS EN 50420:2006 BS EN 50420:2006. Basic standard for the evaluation of human exposure to electromagnetic fields from a stand alone broadcast transmitter (30 MHz - 40 GHz)
BS ISO 14245:2006 BS ISO 14245:2006. Gas cylinders. Specification and testing of LPG cylinder valves. Self-closing
BS ISO 15995:2006 BS ISO 15995:2006. Gas cylinders. Specification and testing of LPG cylinder valves. Manually operated
BS EN 50421:2006 BS EN 50421:2006. Product standard to demonstrate the compliance of stand alone broadcast transmitters with the reference levels or the basic restrictions related to public human expo
BS EN 60335-2-59:2003 BS EN 60335-2-59:2003. Household and similar electrical appliances. Safety. Particular requirements for insect killers
BS ISO 2254:2004 BS ISO 2254:2004. Cloves, whole and ground (powdered). Specification
BS EN 60335-2-17:2002 BS EN 60335-2-17:2002. Household and similar electrical appliances. Safety. Particular requirements for blankets, pads and similar flexible heating appliances
BS EN 60335-2-73:2003 BS EN 60335-2-73:2003. Specification for safety of household and similar electrical appliances. Particular requirements for fixed immersion heaters
BS EN 14704-3:2006 BS EN 14704-3:2006. Determination of the elasticity of fabrics. Narrow fabrics
WD/ISO23570-3 : 2006 EDTN1 WD/ISO23570-3 : 2006 EDTN1. ISO 23570-3 Industrial automation systems and integration - Distributed installation in industrial applications. Part 3: Power distribution bus
BS EN 13450:2002 BS EN 13450:2002. Aggregates for railway ballast
BS ISO/IEC TR 14496-9:2004 BS ISO/IEC TR 14496-9:2004. Information technology. Coding of audio-visual objects. Reference hardware description
BSISO/IECTR14496-9 : 2004 (COVERS) BSISO/IECTR14496-9 : 2004 (COVERS). Information technology. Coding of audio-visual objects. Reference hardware description
BS EN 12517-1:2006 BS EN 12517-1:2006. Non-destructive testing of welds. Evaluation of welded joints in steel, nickel, titanium and their alloys by radiography. Acceptance levels
DD CEN/TS 15025:2006 DD CEN/TS 15025:2006. Copper and copper alloys. Determination of magnesium content. Flame atomic absorption spectrometry method (FAAS)
DD CEN/TS 15023-3:2006 DD CEN/TS 15023-3:2006. Copper and copper alloys. Determination of nickel content. Flame atomic absorption spectrometry method (FAAS)
BS EN 15022-3:2006 BS EN 15022-3:2006. Copper and copper alloys. Determination of tin content. Low tin content. Flame atomic absorption spectrometry method (FAAS)
DD CEN/TS 15022-4:2006 DD CEN/TS 15022-4:2006. Copper and copper alloys. Determination of tin content. Medium tin content. Flame atomic absorption spectrometry method (FAAS)
BS EN 15024-2:2006 BS EN 15024-2:2006. Copper and copper alloys. Determination of zinc content. Flame atomic absorption spectrometry method (FAAS)
BS EN 1057:2006 BS EN 1057:2006. Copper and copper alloys. Seamless, round copper tubes for water and gas in sanitary and heating applications
BS EN 15020:2006 BS EN 15020:2006. Railway applications. Rescue coupler. Performance requirements, specific interface geometry and test methods
DD IEC PAS 62001:2004 DD IEC PAS 62001:2004. Guide to the specification and design evaluation of a.c. filters for HVDC systems
BS EN 10130:2006 BS EN 10130:2006. Cold rolled low carbon steel flat products for cold forming. Technical delivery conditions
BS EN 13139:2002 BS EN 13139:2002. Aggregates for mortar
BS EN 1367-3:2001 BS EN 1367-3:2001. Tests for thermal and weathering properties of aggregates. Boiling test for Sonnenbrand basalt
BS EN 13383-1:2002 BS EN 13383-1:2002. Armourstone. Specification
BS EN 1247:2004 BS EN 1247:2004. Foundry machinery. Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi-continuous casting machines
ISO/IECTR24704 : 2004 EDTN1 ISO/IECTR24704 : 2004 EDTN1. ISO/IECTR24704 : 2004 Information technology -- Customer premises cabling for wireless access points
BS EN ISO 7200:2004 BS EN ISO 7200:2004. Technical product documentation. Data fields in title blocks and document headers
DD IEC/TS 62404:2007 DD IEC/TS 62404:2007. Logic digital integrated circuits. Specification for I/O interface model for integrated circuit (IMIC version 1.3)
BSISO/IEC14515-2 : 2004 BSISO/IEC14515-2 : 2004 .
BSISO/IEC14515-2 : 2004 (CD-ROM) BSISO/IEC14515-2 : 2004 (CD-ROM).
BS ISO 5468:2006 BS ISO 5468:2006. Rotary and rotary impact masonry drill bits with hardmetal tips. Dimensions
BS EN 1935:2002 BS EN 1935:2002. Building hardware. Single-axis hinges. Requirements and test methods
BS EN 933-6:2001 BS EN 933-6:2001. Tests for geometrical properties of aggregates. Assessment of surface characteristics. Flow coefficient of aggregates
ISO/ASTM51539 : 2005 EDTN2 ISO/ASTM51539 : 2005 EDTN2. ISO/ASTM51539 : 2005 Standard guide for use of radiation-sensitive indicators
BS EN 13938-2:2004 BS EN 13938-2:2004. Explosives for civil uses. Propellants and rocket propellants. Determination of resistance to electrostatic energy
BS EN 13631-12:2004 BS EN 13631-12:2004. Explosives for civil uses. High explosives. Specifications of boosters with different initiating capability
PP 1990:2004 PP 1990:2004. Structural Eurocodes. Guide to the Structural Eurocodes for students of structural design
BS ISO 14617-1:2002 BS ISO 14617-1:2002. Graphical symbols for diagrams. General information and indexes
BS ISO 14617-2:2002 BS ISO 14617-2:2002. Graphical symbols for diagrams. Symbols having general application
BS ISO 14617-3:2002 BS ISO 14617-3:2002. Graphical symbols for diagrams. Connections and related devices
BS ISO 14617-4:2002 BS ISO 14617-4:2002. Graphical symbols for diagrams. Actuators and related devices
BS ISO 14617-5:2002 BS ISO 14617-5:2002. Graphical symbols for diagrams. Measurement and control devices
BS ISO 14617-6:2002 BS ISO 14617-6:2002. Graphical symbols for diagrams. Measurement and control functions
BS ISO 14617-7:2002 BS ISO 14617-7:2002. Graphical symbols for diagrams. Basic mechanical components
BS ISO 14617-8:2002 BS ISO 14617-8:2002. Graphical symbols for diagrams. Valves and dampers
BS ISO 14617-9:2002 BS ISO 14617-9:2002. Graphical symbols for diagrams. Pumps, compressors and fans
BS ISO 14617-10:2002 BS ISO 14617-10:2002. Graphical symbols for diagrams. Fluid power converters
BS ISO 14617-11:2002 BS ISO 14617-11:2002. Graphical symbols for diagrams. Devices for heat transfer and heat engines
BS ISO 14617-12:2002 BS ISO 14617-12:2002. Graphical symbols for diagrams. Devices for separating, purification and mixing
BS ISO 13715:2000 BS ISO 13715:2000. Technical drawings. Edges of undefined shape. Vocabulary and indications
BS EN ISO 15791-1:2004 BS EN ISO 15791-1:2004. Plastics. Development and use of intermediate-scale fire tests for plastics products. General guidance
BS ISO 16592:2006 BS ISO 16592:2006. Microbeam analysis. Electron probe microanalysis. Guidelines for determining the carbon content of steels using a calibration curve method
BS ISO 22489:2006 BS ISO 22489:2006. Microbeam analysis. Electron probe microanalysis. Quantitative point analysis for bulk specimens using wavelength-dispersive X-ray spectroscopy
BS EN ISO 2538:2003 BS EN ISO 2538:2003. Geometrical product specifications (GPS). Series of angles and slopes on prisms
BIP 0011:2004 BIP 0011:2004. Privacy in E-Business. Promoting respect, trust and confidence in your organization
BS EN 1756-1:2001+A1:2008 BS EN 1756-1:2001+A1:2008. Tail lifts. Platform lifts for mounting on wheeled vehicles. Safety requirements. Tail lifts for goods
BS EN 1759-3:2003 BS EN 1759-3:2003. Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class designated. Copper alloy flanges
BS EN 1092-3:2003 BS EN 1092-3:2003. Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated. Copper alloy flanges
BS EN 13043:2002 BS EN 13043:2002. Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas
PD CEN/TR 14599:2005 PD CEN/TR 14599:2005. Terms and definitions for welding purposes in relation with EN 1792
BS EN 13055-1:2002 BS EN 13055-1:2002. Lightweight aggregates. Lightweight aggregates for concrete, mortar and grout
BS EN 10207:2005 BS EN 10207:2005. Steels for simple pressure vessels. Technical delivery requirements for plates, strips and bars
BS EN 12323:2005 BS EN 12323:2005. AIDC technologies. Symbology specifications. Code 16K
PD CEN/TR 15071:2005 PD CEN/TR 15071:2005. Safety of toys. National translations of warnings and instructions for use of EN 71
BS EN ISO 8092-2:2005 BS EN ISO 8092-2:2005. Road vehicles. Connections for on-board electrical wiring harnesses. Definitions, test methods and general performance requirements
CWA 14722-1:2004 CWA 14722-1:2004. Embedded financial transactional IC reader (embedded FINREAD). business requirementds
CWA 14722-2:2004 CWA 14722-2:2004. Embedded financial transactional IC reader (embedded FINREAD). Functional architecture and technical requirements
CWA 14722-3:2004 Version 2 CWA 14722-3:2004 Version 2. Embedded financial transactional IC reader (embedded FINREAD). Functional and security specifications
CWA 14722-4:2004 Version 2 CWA 14722-4:2004 Version 2. Embedded financial transactional IC reader (embedded FINREAD). Technical architecture and definition of APIs (application programming interface)
BS EN 61935-2:2005 BS EN 61935-2:2005. Testing of balanced communication cabling in accordance with standards series EN 50173. Patch cords and work area cords
04/30118849 DC 04/30118849 DC. EN 15013. Plastics piping systems. Non-pressure drainage and sewerage systems buried in ground
BS EN ISO 4074:2002 BS EN ISO 4074:2002. Natural latex rubber condoms. Requirements and test methods
BS EN 12668-2:2001 BS EN 12668-2:2001. Non-destructive testing. Characterization and verification of ultrasonic examination equipment. Probes
DD IEC/TS 60695-6-2:2005 DD IEC/TS 60695-6-2:2005. Fire hazard testing. Smoke obscuration. Summary and relevance of test methods
BS EN 12251:2004 BS EN 12251:2004. Health informatics. Secure user identification for health care. Management and security of authentication by passwords
BS ISO 17470:2004 BS ISO 17470:2004. Microbeam analysis. Electron probe microanalysis. Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry
BS ISO 16700:2004 BS ISO 16700:2004. Microbeam analysis. Scanning electron microscopy. Guidelines for calibrating image magnification
ISO3999 : 2004 EDTN2 ISO3999 : 2004 EDTN2. ISO3999 : 2004 Radiation protection - Apparatus for industrial gamma radiography - Specifications for performance, design and tests
BS EN 60761-1:2004 BS EN 60761-1:2004. Equipment for continuous monitoring radioactivity in gaseous effluents. General requirements
BS EN 61582:2006 BS EN 61582:2006. Radiation protection instrumentation. In vivo counters. Classification, general requirements and test procedures for portable, transportable and installed equipment
BS EN ISO 10075-3:2004 BS EN ISO 10075-3:2004. Ergonomic principles related to mental workload. Principles and requirements concerning methods for measuring and assessing mental workload
BIP 0054:2004 BIP 0054:2004. ITIL. The Business perspective
BIP 0055:2004 BIP 0055:2004. ITIL. ICT Infrastructure Management
BIP 0056:2004 BIP 0056:2004. ITIL. Application Management
BIP 0057:2004 BIP 0057:2004. ITIL. Planning to implement service management
BIP 0058:2004 BIP 0058:2004. ITIL. Software asset management
BS EN 60335-2-65:2003 BS EN 60335-2-65:2003. Specification for safety of household and similar electrical appliances. Particular requirements for air-cleaning appliances
BS EN 60335-2-66:2003 BS EN 60335-2-66:2003. Specification for safety of household and similar electrical appliances. Particular requirements for water-bed heaters
BS 8900:2006 BS 8900:2006. Guidance for managing sustainable development
BIP 2059:2005 BIP 2059:2005. Managing Successful Projects with PRINCE2. Reference manual
BIP 2060:2004 BIP 2060:2004. Management of Risk. Guidance for practitioners
BIP 2061:2004 BIP 2061:2004. Managing Successful Programmes. Delivering business change in multi-project environments
ISO20553 : 2006 EDTN1 ISO20553 : 2006 EDTN1. ISO20553 : 2006 Radiation protection - Monitoring of workers occupationally exposed to a risk of internal contamination with radioactive material
BIP 2062:2004 BIP 2062:2004. BRC Global Standard. Consumer products
BIP 2063:2004 BIP 2063:2004. A Retailer's Guide to Legal Compliance
BIP 3020:2004 BIP 3020:2004. Managing Successful Projects with PRINCE2 CD-ROM
BIP 3021:2004 BIP 3021:2004. Management of Risk. Guidance for practitioners CD-ROM
BIP 3022:2004 BIP 3022:2004. Managing Successful Programmes. Delivering business change in multi-project environments CD-ROM
BS ISO 21238:2007 BS ISO 21238:2007. Nuclear energy. Nuclear fuel technology. Scaling factor method to determine the radioactivity of low and intermediate-level radioactive waste packages generated at
BS ISO 9116:2004 BS ISO 9116:2004. Green coffee. Guidelines on methods of specification
DD CLC/TS 50430:2005 DD CLC/TS 50430:2005. Optical fibre cables. Gas pipe cables. Family specifications for cables to be installed in high pressure gas pipes
DD CLC/TS 50431:2005 DD CLC/TS 50431:2005. Optical fibre cables. Drinking water pipe cables. Family specification for cables to be installed in drinking water pipes
04/30119019 DC 04/30119019 DC. CENELEC TS 50432. Specification for optical patch cords and work area cords
DD CLC/TS 50429:2005 DD CLC/TS 50429:2005. Optical fibre cables. Sewer cables. Family specification for cables to be installed in storm and sanitary sewers
DD CLC/TS 50433:2005 DD CLC/TS 50433:2005. Guidelines for paving the way for broadband "Broadband, 25 Mbit/s and more for All"
BS IEC 62397:2007 BS IEC 62397:2007. Nuclear power plants. Instrumentation and control important to safety. Resistance temperature detectors
BS ISO 17499:2006 BS ISO 17499:2006. Carbonaceous materials used in the production of aluminium. Determination of baking level expressed by equivalent temperature
BS ISO 23202:2006 BS ISO 23202:2006. Aluminium oxide used for the production of aluminium. Determination of particles passing a 20 micrometre aperture sieve
BS ISO 8007-3:2004 BS ISO 8007-3:2004. Carbonaceous materials used in the production of aluminium. Sampling plans and sampling from individual units. Sidewall blocks
04/30119099 DC 04/30119099 DC. ISO/IEC 22537. Information technology. ECMAScript for XML (E4X) specification
ISO/IEC22537 : 2006 EDTN1 ISO/IEC22537 : 2006 EDTN1. ISO/IEC22537 : 2006 Information technology - ECMAScript for XML (E4X) specification
BS ISO 22641:2005 BS ISO 22641:2005. Space data and information transfer systems. TM (telemetry) synchronization and channel coding
BS ISO 22645:2005 BS ISO 22645:2005. Space data and information transfer systems. TM (telemetry) space data link protocol
BS ISO 22646:2005 BS ISO 22646:2005. Space data and information transfer systems. Space packet protocol
BS ISO 22664:2005 BS ISO 22664:2005. Space data and information systems. TC (telecommand) space data links protocol
BS ISO 22666:2005 BS ISO 22666:2005. Space data and information transfer systems. AOS (advanced orbiting systems) space data link protocol
BS ISO 22667:2005 BS ISO 22667:2005. Space data and information transfer systems. Communications operations procedure-1
06/30119140 DC 06/30119140 DC. EN 746-2. Industrial thermoprocessing equipment. Part 2. Safety requirements for combustion and fuel handling systems
BS EN 14981:2006 BS EN 14981:2006. Surface active agents. Determination of content of high boiling solvents in liquid detergents by GLC
BS EN 62328-1:2005 BS EN 62328-1:2005. Multimedia home server systems. Interchangeable volume/file structure adaptation for broadcasting receivers. General description and architecture
BS EN 62328-2:2005 BS EN 62328-2:2005. Multimedia home server systems. Interchangeable volume/file structure adaptation for broadcasting receivers. General recording structure
BS ISO 4998:2005 BS ISO 4998:2005. Continuous hot-dip zinc-coated carbon steel sheet of structural quality
BS ISO/IEC 15962:2004 BS ISO/IEC 15962:2004. Information technology. Radio frequency identification (RFID) for item management. Data protocol. Data encoding rules and logical memory functions
BS EN 14998:2005 BS EN 14998:2005. Derivatives from coal pyrolysis. Coal tar based oils: fluxings oils. Specifications and test methods
BS EN 12441-1:2002 BS EN 12441-1:2002. Zinc and zinc alloys. Chemical analysis. Determination of aluminium in zinc alloys. Titrimetric method
BSISO17282 : 2004 (CD-ROM) BSISO17282 : 2004 (CD-ROM). Plastics. Guide to the acquisition and presentation of design data
BSISO17282 : 2004 (COVERS) BSISO17282 : 2004 (COVERS). Plastics. Guide to the acquisition and presentation of design data
BS ISO 11929-1:2000 BS ISO 11929-1:2000. Determination of the detection limit and decision threshold for ionizing radiation measurements. Fundamentals and application to counting measurements without
BS ISO 11929-2:2000 BS ISO 11929-2:2000. Determination of the detection limit and decision threshold for ionizing radiation measurements. Fundamentals and application to counting measurements with the
BS ISO 11929-3:2000 BS ISO 11929-3:2000. Determination of the detection limit and decision threshold for ionizing radiation measurements. Fundamentals and application to counting measurements by high
BS ISO 3728:2004 BS ISO 3728:2004. Ice-cream and milk ice. Determination of total solids content (reference method)
BS ISO 2911:2004 BS ISO 2911:2004. Sweetened condensed milk. Determination of sucrose content. Polarimetric method
BS ISO 8086:2004 BS ISO 8086:2004. Dairy plant. Hygiene conditions. General guidance on inspection and sampling procedures
BS ISO 5548:2004 BS ISO 5548:2004. Caseins and caseinates. Determination of lactose content. Photometric methods
BS ISO 1740:2004 BS ISO 1740:2004. Milkfat products and butter. Determination of fat acidity (reference method)
BS ISO 7238:2004 BS ISO 7238:2004. Butter. Determination of pH of the serum. Potentiometric method
BS EN 12463:2004 BS EN 12463:2004. Food processing machinery. Filling machines and auxiliary machines. Safety and hygiene requirements
BS ISO 14850-1:2004 BS ISO 14850-1:2004. Nuclear energy. Waste-packages activity measurement. High-resolution gamma spectrometry in integral mode with open geometry
BS ISO 8083:2006 BS ISO 8083:2006. Machinery for forestry. Falling-object protective structures (FOPS). Laboratory tests and performance requirements
PD ISO/IEC TR 24710:2005 PD ISO/IEC TR 24710:2005. Information technology. Radio frequency identification for item management. Elementary tag licence plate funtionality for ISO/IEC 18000 air interface
04/30119270 DC 04/30119270 DC. IEC 61033 AMD 1. Test methods for the determination of bond strength of impregnating agents to an enameled wire substrate
CWA 15064:2004 CWA 15064:2004. SAD Imports Declaration. Implementation model
CWA 15065:2004 CWA 15065:2004. SAD Exports Declaration. Implementation model
CWA 15066:2004 CWA 15066:2004. SAD Transit Declaration. Implementation model
BS IEC 61577-1:2006 BS IEC 61577-1:2006. Radiation protection instrumentation. Radon and radon decay product measuring instruments. General principles
BS EN 60695-6-1:2005 BS EN 60695-6-1:2005. Fire hazard testing. Smoke obscuration. General guidance
BS ISO 5543:2004 BS ISO 5543:2004. Caseins and caseinates. Determination of fat content. Gravimetric method (reference method)
BS EN 13107:2004 BS EN 13107:2004. Safety requirements for cableway installations designed to carry persons. Civil engineering works
BS ISO/IEC 21000-7:2004 BS ISO/IEC 21000-7:2004. Information technology. Multimedia framework (MPEG-21). Digital item adaptation
BS ISO/IEC 13250-2:2006 BS ISO/IEC 13250-2:2006. Information technology. Topic maps. Data model
BS ISO/IEC 13250-3:2007 BS ISO/IEC 13250-3:2007. Information technology. Topic maps. XML syntax
DD ENV 13481-6:2002 DD ENV 13481-6:2002. Railway applications. Track. Performance requirements for fastening systems. Special fastening systems for attenuation of vibration
BS ISO/IEC 19757-3:2006 BS ISO/IEC 19757-3:2006. Information technology. Document schema definition languages (DSDL). Rule-based validation. Schematron
BS ISO 15370:2001 BS ISO 15370:2001. Ships and marine technology. Low location lighting on passenger ships. Arrangement
BS ISO/IEC 19757-2:2003 BS ISO/IEC 19757-2:2003. Information technology. Document Schema Definition Language (DSDL). Regular-grammar-based validation. RELAX NG
BS EN 14901:2006 BS EN 14901:2006. Ductile iron pipes, fittings and accessories. Epoxy coating (heavy duty) of ductile iron fittings and accessories. Requirements and test methods
BS EN 1909:2004 BS EN 1909:2004. Safety requirements for cableway installations designed to carry persons. Recovery and evacuation
PD CEN/TR 14819-1:2004 PD CEN/TR 14819-1:2004. Safety recommendations for cableway installations designed to carry persons. Prevention and fight against fire. Funicular railways in tunnels
PD IEC TR 61131-4:2004 PD IEC TR 61131-4:2004. Programmable controllers. User guidelines
BIP 2064:2004 BIP 2064:2004. Building Regulations 2000. Approved Document B
BIP 2065:2004 BIP 2065:2004. Building Regulations 2000. Approved Document M
BIP 2066:2004 BIP 2066:2004. Defects in Buildings. Symptoms, investigation, diagnosis and cure
BS EN 13200-4:2006 BS EN 13200-4:2006. Spectator facilities. Seats. Product characteristics
BS ISO 22310:2006 BS ISO 22310:2006. Information and documentation. Guidelines for standards drafters for stating records management requirements in standards
CWA 45547:2004 CWA 45547:2004. Manual for determination of combined heat and power (CHP)
BS 5261-2:2005 BS 5261-2:2005. Copy preparation and proof correction. Specification for typographic requirements, marks for copy preparation and proof correction, proofing procedure
BS 5261C:2005 BS 5261C:2005. Copy preparation and proof correction. Marks for copy preparation and proof correction (extracted from BS 5261-2:2005)
BS IEC 60287-1-1:2006 BS IEC 60287-1-1:2006. Electric cables. Calculation of the current rating. Current rating equations (100% load factor) and calculation of losses. General
DD CEN/TS 14906:2004 DD CEN/TS 14906:2004. Leather. Upholstery leather characteristics. Guide for the selection of leather for automotive
BS EN 15038:2006 BS EN 15038:2006. Translation services. Service requirements
ISO10958-2 : 2004 EDTN2 ISO10958-2 : 2004 EDTN2 . ISO10958-2 : 2004 Snowboards - Binding mounting area -. Part 2: Requirements and test methods for Snowboards with inserts
BS EN 61587-3:2006 BS EN 61587-3:2006. Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297. Electromagnetic shielding performance tests for cabinets, racks and sub-racks
BS ISO 13555-3:2004 BS ISO 13555-3:2004. Diesel engines. Procedure for checking the dynamic timing of diesel fuel injection equipment. Validation of timing devices
BS ISO 6519:2004 BS ISO 6519:2004. Diesel engines. Fuel injection pumps. Tapers for shaft ends and hubs
BS ISO 7876-4:2004 BS ISO 7876-4:2004. Fuel injection equipment. Vocabulary. High-pressure pipes and end-connections
BS 6037-2:2004 BS 6037-2:2004. Code of practice for the planning, design, installation and use of permanently installed access equipment. Travelling ladders and gantries
04/30122177 DC 04/30122177 DC. ISO/IEC 22534. Information technology. Telecommunications and information exchange between systems. Application session services
ISO/IEC22534 : 2005 EDTN1 ISO/IEC22534 : 2005 EDTN1. ISO/IEC22534 : 2005 Information technology - Telecommunications and information exchange between systems - Application session services
04/30122182 DC 04/30122182 DC. ISO/IEC 22535. Information technology. Telecommunications and information exchange between systems. Corporate telecommunication networks. Tunnelling of QSIG over SIP
WD/ISO/IEC22535 : 2005 EDTN1 WD/ISO/IEC22535 : 2005 EDTN1. ISO/IEC22535 : 2005 Information technology - Telecommunications and information exchange between systems - Corporate telecommunication networ
04/30122184 DC 04/30122184 DC. ISO/IEC 22536. Information technology. Telecommunications and information exchange between systems. NFCIP-1- RF. Interface test methods
ISO/IEC22536 : 2005 EDTN1 ISO/IEC22536 : 2005 EDTN1. ISO/IEC22536 : 2005 Information technology - Telecommunications and information exchange between systems - Near field communication interface and p
BS ISO 12647-6:2006 BS ISO 12647-6:2006. Graphic technology. Process control for the production of half-tone colour separations, proofs and production prints. Flexographic printing
BS EN 14135:2004 BS EN 14135:2004. Coverings. Determination of fire protection ability
PD CEN/TR 15133:2005 PD CEN/TR 15133:2005. Nomenclature. Collective terms and codes for groups of medical devices
DD CEN ISO/TS 11133-2:2003 DD CEN ISO/TS 11133-2:2003. Microbiology of food and animal feeding stuffs. Guidelines on preparation and production of culture media. Practical guidelines on performance te
BS EN ISO 5269-1:2005 BS EN ISO 5269-1:2005. Pulps. Preparation of laboratory sheets for physical testing. Conventional sheet-former method
BS EN ISO 5269-2:2004 BS EN ISO 5269-2:2004. Pulps. Preparation of laboratory sheets for physical testing. Rapid-Koethen method
BS ISO 5350-4:2006 BS ISO 5350-4:2006. Pulps. Estimation of dirt and shives. Instrumental inspection by reflected light using equivalent black area (EBA) method
BS ISO 16065-2:2007 BS ISO 16065-2:2007. Pulps. Determination of fibre length by automated optical analysis. Unpolarized light method
BS 7533-12:2006 BS 7533-12:2006. Pavements constructed with clay, natural stone or concrete pavers. Guide to the structural design of trafficked pavements constructed on a bound base using concrete pa
ISO10218-1 : 2006 EDTN1 ISO10218-1 : 2006 EDTN1. ISO10218-1 : 2006 Robots for industrial environments - Safety requirements -. Part 1: Robot
DD CEN/TS 1071-8:2004 DD CEN/TS 1071-8:2004. Advanced technical ceramics. Methods of text for ceramic coatings. Rockwell indentation test for evaluation of adhesion
BS EN 12697-3:2005 BS EN 12697-3:2005. Bituminous mixtures. Test methods for hot mix asphalt. Bitumen recovery. Rotary evaporator
BS EN 12697-4:2005 BS EN 12697-4:2005. Bituminous mixtures. Test methods for hot mix asphalt. Bitumen recovery. Fractionating column
BS ISO 11084-2:2006 BS ISO 11084-2:2006. Graphic technology. Register systems for photographic materials, foils and paper. Register pin systems for plate making
BS ISO 2846-1:2006 BS ISO 2846-1:2006. Graphic technology. Colour and transparency of printing ink sets for four-colour printing. Part 1. Sheet-fed and heat-set web offset lithographic printing
BS ISO 12637-1:2006 BS ISO 12637-1:2006. Graphic technology. Vocabulary. Fundamental terms
BS ISO 16657:2006 BS ISO 16657:2006. Sensory analysis. Apparatus. Olive oil tasting glass
BS ISO 11723:2004 BS ISO 11723:2004. Solid mineral fuels. Determination of arsenic and selenium. Eschka's mixture and hydride generation method
BS ISO 17194:2007 BS ISO 17194:2007. Structural adhesives. A standard database of properties
BS ISO/IEC 15961:2004 BS ISO/IEC 15961:2004. Information technology. Radio frequency identification (RFID) for item management. Data protocol. Application interface
DD ISO/TS 13399-100:2004 DD ISO/TS 13399-100:2004. Cutting tool data representation and exchange. Definitions, principles and methods for reference dictionaries
ISO20433 : 2005 EDTN1 ISO20433 : 2005 EDTN1. ISO20433 : 2005 Leather - Tests for colour fastness - Colour fastness to crocking
ISO17228 : 2005 ( HEADER) EDTN1 ISO17228 : 2005 ( HEADER) EDTN1. ISO17228 : 2005 Leather - Tests for colour fastness - Change in colour with accelerated ageing
05/30122498 DC 05/30122498 DC. IEC 62153-4-0. Metallic communication cable test methods. Part 4-0. Electro magnetic compatibility (EMC). Relationship between surface transfer impedance and screening a
04/30122507 DC 04/30122507 DC. BS EN 50377-12-1. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Part 12-1. Type SC-PC and SC-APC
BS EN 60526:2004 BS EN 60526:2004. High-voltage cable plug and socket connections for medical X-ray equipment
KIT 147 KIT 147. Graphical symbols kit (BS 5499 and CD-ROM)
KIT 146 KIT 146. Graphical symbols kit (BS 5499)
BS EN 14075:2002 BS EN 14075:2002. Static welded steel cylindrical tanks, serially produced for the storage of liquefied petroleum gas (LPG) having a volume not greater than 13 m3 and for installation
BS EN 14035-35:2004 BS EN 14035-35:2004. Fireworks. Throwdowns. Specification and test methods
BS EN 45510-2-8:2004 BS EN 45510-2-8:2004. Guide for procurement of power station equipment. Electrical equipment. Power cables
BS EN ISO 10650-1:2005 BS EN ISO 10650-1:2005. Dentistry. Powered polymerization activators. Quartz tungsten halogen lamps
BIP 2039 (QMS Boxed Set) BIP 2039 (QMS Boxed Set). Quality management. Achieving registration
BS ISO 13990-1:2006 BS ISO 13990-1:2006. Textile machinery and accessories. Yarn feeders and yarn control for knitting machines. Vocabulary
BS ISO 13990-2:2006 BS ISO 13990-2:2006. Textile machinery and accessories. Yarn feeders and yarn control for knitting machines. Connecting dimensions for yarn feeders and yarn control devices
BS ISO 13990-3:2006 BS ISO 13990-3:2006. Textile machinery and accessories. Yarn feeders and yarn control for knitting machines. Dimensions for connecting and interconnection cables
BS ISO 20301:2006 BS ISO 20301:2006. Health informatics. Health cards. General characteristics
BS EN 60974-4:2007 BS EN 60974-4:2007. Arc welding equipment. In-service inspection and testing
DD CEN/TS 14966:2005 DD CEN/TS 14966:2005. Wood-based panels. Small scale indicative test methods for certain mechanical properties
BS EN 13457:2004 BS EN 13457:2004. Footwear, leather and imitation leather goods manufacturing machines. Splitting, skiving, cutting, cementing and cement drying machines. Safety requirements
BS ISO 6966-2:2005 BS ISO 6966-2:2005. Aircraft ground equipment. Basic requirements. Safety requirements
BS ISO 6966-1:2005 BS ISO 6966-1:2005. Aircraft ground equipment. Basic requirements. General design requirements
BS EN 13566-2:2005 BS EN 13566-2:2005. Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks. Lining with continuous pipes
BS 7958:2005 BS 7958:2005. Closed-circuit television (CCTV). Management and operation. Code of practice
BS EN 15036-1:2006 BS EN 15036-1:2006. Heating boilers. Test regulations for airborne noise emissions from heat generators. Airborne noise emissions from heat generators
BS EN 15035:2006 BS EN 15035:2006. Heating boilers. Special requirements for oil fired room sealed units up to 70 kW
BS EN 15034:2006 BS EN 15034:2006. Heating boilers. Condensing heating boilers for fuel oil
KIT 148 KIT 148. Surface texture standards kit
BS EN 14408-1:2004 BS EN 14408-1:2004. Plastics piping systems for renovation of underground gas supply networks. General
04/30122823 DC 04/30122823 DC. IEC 60751. Industrial platinum resistance thermometer sensors
BS EN 14408-3:2004 BS EN 14408-3:2004. Plastics piping systems for renovation of underground gas supply networks. Lining with close-fit pipes
BS EN 14409-1:2004 BS EN 14409-1:2004. Plastics piping systems for renovation of underground water supply networks. General
BS EN 14409-3:2004 BS EN 14409-3:2004. Plastics piping systems for renovation of underground water supply networks. Lining with close fit pipes
BS EN 13042-2:2004 BS EN 13042-2:2004. Machines and plants for the manufacture, treatment and processing of hollow glass. Safety requirements. Handling machines for feeding
BS EN 13575:2004 BS EN 13575:2004. Thermoplastics tanks made from blow or rotational moulded polyethylene. Tanks for the above ground storage of chemicals. Requirements and test methods
BS EN ISO 10618:2004 BS EN ISO 10618:2004. Carbon fibre. Determination of tensile properties of resin-impregnated yarn
ISO7240-22 : 2007 EDTN1 ISO7240-22 : 2007 EDTN1. ISO 7240-22:2007 Fire detection and alarm systems. Part 22: Smoke-detection equipment for ducts
BS EN 61169-2:2007 BS EN 61169-2:2007. Radio-frequency connectors. Sectional specification. Radio frequency coaxial connectors of type 9,52
BS 7971-11:2006 BS 7971-11:2006. Protective clothing and equipment for use in violent situations and in training. Foot and ankle protectors and foot protectors. Requirements and test methods
BS 5499-10:2006 BS 5499-10:2006. Safety signs, including fire safety signs. Code of practice for the use of safety signs, including fire safety signs
DD 8455:2007 DD 8455:2007. Materials for gaskets and weatherstripping for windows, doors, conservatories and curtain walling. Requirements and test methods
BS ISO 19212:2006 BS ISO 19212:2006. Adhesives. Determination of temperature dependence of shear strength
BS ISO 17228:2005 BS ISO 17228:2005. Leather. Tests for colour fastness. Change in colour with accelerated ageing
05/30122919 DC 05/30122919 DC. IEC 62223. Insulators. Glossary of terms
BS ISO 20433:2005 BS ISO 20433:2005. Leather. Tests for colour fastness. Colour fastness to crocking
BS ISO 7372:2005 BS ISO 7372:2005. Trade data interchange. Trade data elements directory
BS EN 61300-2-16:2006 BS EN 61300-2-16:2006. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Mould growth
BS ISO 13448-2:2004 BS ISO 13448-2:2004. Acceptance sampling procedures based on the allocation of priorities principles (APP). Coordinated single sampling plans for acceptance sampling by attributes
BS EN 60793-1-34:2006 BS EN 60793-1-34:2006. Optical fibres. Measurement methods and test procedures. Fibre curl
BS EN 13348:2001 BS EN 13348:2001. Copper and copper alloys. Seamless, round copper tubes for medical gases or vacuum
BS EN 12735-1:2001 BS EN 12735-1:2001. Copper and copper alloys. Seamless, round copper tubes for air conditioning and refrigeration. Tubes for piping systems
BS 7412:2002 BS 7412:2002. Plastics windows made from unplasticized polyvinyl chloride (PVC-U) extruded hollow profiles. Specification
BS ISO 4992-2:2006 BS ISO 4992-2:2006. Steel castings. Ultrasonic examination. Steel castings for highly stressed components
BS EN 362:2004 BS EN 362:2004. Personal protective equipment against falls from a height. Connectors
BS EN ISO 6570:2004 BS EN ISO 6570:2004. Natural gas. Determination of potential hydrocarbon liquid content. Gravimetric methods
BS ISO 20805:2005 BS ISO 20805:2005. Hot-rolled sheet steel in coils of higher yield strength with improved formability and heavy thickness for cold forming
ISO/IEC14776-452 : 2005 EDTN 1 ISO/IEC14776-452 : 2005 EDTN 1. ISO/IEC14776-452 : 2005 Information technology -- Small Computer System Interface (SCSI). Part 452: SCSI Primary Commands - 2 (SPC-2)
ISO/IECTR19797 : 2004 EDTN 1 ISO/IECTR19797 : 2004 EDTN 1. ISO/IECTR19797 : 2004 Information technology - Office machines - Device output of 16 colour scales, output linearization method (LM) and spec
BS EN 60300-3-1:2004 BS EN 60300-3-1:2004. Dependability management. Application guide. Analysis techniques for dependability. Guide on methodology
BS ISO 9772:2001 BS ISO 9772:2001. Cellular plastics. Determination of horizontal burning characteristics of small specimens subjected to a small flame
BS EN 14982:2006 BS EN 14982:2006. Plastics piping systems. Thermoplastics shafts or risers for inspection chambers and manholes. Determination of ring stiffness
BS ISO 4141-1:2005 BS ISO 4141-1:2005. Road vehicles. Multi-core connecting cables. Test methods and requirements for basic performance sheathed cables
NSSF IPR NSSF IPR. Standards and Intellectual Property Rights
BS EN 196-10:2006 BS EN 196-10:2006. Methods of testing cement. Determination of the water soluble chromium (VI) content of cement
BS 903-3:2003 BS 903-3:2003. Physical testing of rubber. Acquisition and presentation of comparable single-point data
ISO/TR16570 : 2004 (EDTN1) HEADER ISO/TR16570 : 2004 (EDTN1) HEADER. ISO/TR16570 : 2004 Geometric product specifications - linear and angular dimensioning and tolerancing, +/- limit specifications - S
BIP 3016:2004 BIP 3016:2004. BS 8888:2004 Technical Product Specification CD-ROM
BS ISO 3547-1:2006 BS ISO 3547-1:2006. Plain bearings. Wrapped bushes. Dimensions
BS ISO 3547-2:2006 BS ISO 3547-2:2006. Plain bearings. Wrapped bushes. Test data for outside and inside diameters
BS ISO 3547-3:2006 BS ISO 3547-3:2006. Plain bearings. Wrapped bushes. Lubrication holes, grooves and indentations
BS ISO 3547-4:2006 BS ISO 3547-4:2006. Plain bearings. Wrapped bushes. Materials
BIP 0050:2004 BIP 0050:2004. Data Protection Pocket Guide. Essential facts at your fingertips
BS EN 10341:2006 BS EN 10341:2006. Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state
BS EN 50290-2-21:2002 BS EN 50290-2-21:2002. Communication cables . Common design rules and construction. PVC insulation compounds
BS EN 50290-2-22:2002 BS EN 50290-2-22:2002. Communication cables . Common design rules and construction. PVC sheathing compounds
BS EN 50290-2-27:2002 BS EN 50290-2-27:2002. Communication cables . Common design rules and construction. Halogen free flame retardant thermoplastic sheathing compounds
04/30123285 DC 04/30123285 DC. BS 1991-1-2. Actions on structures. Part 1-2. General actions on structures exposed to fire
BS EN 12014-3:2005 BS EN 12014-3:2005. Foodstuffs. Determination of nitrate and/or nitrite content. Spectrometric determination of nitrate and nitrite content of meat products after enzymatic reductio
BS EN 12014-4:2005 BS EN 12014-4:2005. Foodstuffs. Determination of nitrate and/or nitrite content. Ion-exchange chromatographic (IC) method for the determination of nitrate and nitrite content of mea
BS IEC 60747-8-4:2004 BS IEC 60747-8-4:2004. Discrete semiconductor devices. Metal-oxide semiconductor field-effect transistors (MOSFETs) for power switching applications
ISO/IEC14165-116 : 2005 EDTN1 ISO/IEC14165-116 : 2005 EDTN1. ISO/IEC14165-116 : 2005 Information technology - Fibre channel. Part 116: 10 Gigabit (10GFC)
ISO/IEC14165-241 : 2005 EDTN 1 ISO/IEC14165-241 : 2005 EDTN 1. ISO/IEC14165-241 : 2005 Information technology - Fibre Channel. Part 241: Backbone 2 (FC-BB-2)
ISO/IEC14776-412 : 2006 EDTN1 ISO/IEC14776-412 : 2006 EDTN1. ISO/IEC14776-412 : 2006 Information technology - Small computer system interface (SCSI). Part 412 : Architecture Model -2 (SAM-2)
04/30123347 DC 04/30123347 DC. IEC 61439-1. Low voltage switchgear and controlgear assemblies. Part 1. General rules
04/30123351 DC 04/30123351 DC. IEC 61439-2. Low voltage switchgear and controlgear assemblies. Part 2. Power switchgear and controlgear assemblies
BS 8504-2:2006 BS 8504-2:2006. Beach safety flags. Materials. Requirements and test methods
BS ISO 15202-3:2004 BS ISO 15202-3:2004. Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Analysis
BS EN 15051:2006 BS EN 15051:2006. Workplace atmospheres. Measurement of the dustiness of bulk materials. Requirements and reference test methods
BS EN 13121-4:2005 BS EN 13121-4:2005. GRP tanks and vessels for use above ground. Delivery, installation and maintenance
04/30123396 DC 04/30123396 DC. ISO 6279. Plain bearings. Aluminium alloys for solid bearings
BS EN ISO 11145:2006 BS EN ISO 11145:2006. Optics and photonics. Lasers and laser-related equipment. Vocabulary and symbols
PD IEC/TR 62039:2007 PD IEC/TR 62039:2007. Selection guide for polymeric materials for outdoor use under HV stress
BS ISO 14317:2006 BS ISO 14317:2006. Sintered metal materials excluding hardmetals. Determination of compressive yield strength
BS EN 60444-9:2007 BS EN 60444-9:2007. Measurement of quartz crystal unit parameters. Measurement of spurious resonances of piezoelectric crystal units
BS EN 61249-2-22:2005 BS EN 61249-2-22:2005. Materials for printed boards and other interconnecting structures. Reinforced base materials, clad and unclad. Modified non-halogenated epoxide woven E-gla
BS EN 14965:2005 BS EN 14965:2005. Inland navigation vessels. Flat bollards
BS EN 12387:2005 BS EN 12387:2005. Footwear, leather and imitation leather goods manufacturing machines. Modular shoe repair equipment. Safety requirements
BS EN 15057:2006 BS EN 15057:2006. Fibre cement profiled sheets. Impact resistance test method
BS EN 682:2002 BS EN 682:2002. Elastomeric seals. Materials requirements for seals used in pipes and fi ttings carrying gas and hydrocarbon fluids
BS EN 15054:2006 BS EN 15054:2006. Non fatty foods. Determination of chlormequat and mepiquat. LC-MS method
BS EN 15055:2006 BS EN 15055:2006. Non fatty foods. Determination of chlormequat and mepiquat. LC-MS/MS method
BS EN 12779:2004 BS EN 12779:2004. Safety of woodworking machines. Chip and dust extraction systems with fixed installation. Safety related performances and safety requirements
BS EN 1392:2006 BS EN 1392:2006. Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Testing of bond strength under specified conditions
BS EN 869:2006 BS EN 869:2006. Safety of machinery. Safety requirements for pressure metal diecasting units
BS EN 58:2004, BS 2000-474:2004 BS EN 58:2004, BS 2000-474:2004. Bitumen and bituminous binders. Sampling bituminous binders
BS EN 14879-3:2006 BS EN 14879-3:2006. Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media. Coatings on concrete componen
BS EN 15058:2006 BS EN 15058:2006. Stationary source emissions. Determination of the mass concentration of carbon monoxide (CO). Reference method: non-dispersive infrared spectrometry
BS EN 15062:2006 BS EN 15062:2006. Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Testing ageing of bonds under specified conditions
BS EN ISO 11681-2:2006 BS EN ISO 11681-2:2006. Machinery for forestry. Portable chain-saw safety requirements and testing. Chain-saws for tree service
BS EN 15063-1:2006 BS EN 15063-1:2006. Copper and copper alloys. Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF). Guidelines to the rou
BS EN 15063-2:2006 BS EN 15063-2:2006. Copper and copper alloys. Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF). Routine method
BS EN ISO 14819-1:2003 BS EN ISO 14819-1:2003. Traffic and travel information (TTI). TTI messages via traffic message coding. Coding protocol for radio data system. Traffic message channel RDS-TMC) us
PD IEC/TR 62010:2005 PD IEC/TR 62010:2005. Analyser systems. Guide to maintenance management
KIT 89 KIT 89. Safety of machinery. Electrotechnical
BS EN 13200-6:2006 BS EN 13200-6:2006. Spectator facilities. Demountable (temporary) stands
BS EN 13200-5:2006 BS EN 13200-5:2006. Spectator facilities. Telescopic stands
KIT 149 KIT 149. Aluminium & aluminium alloys. Chemical composition and mechanical properties kit
KIT 150 KIT 150. Electromagnetic fields pack
KIT 151 KIT 151. Biotechnology. Performance criteria for vessels kit
KIT 152 KIT 152. Biotechnology. Performance criteria for piping and instrumentation kit
KIT 153 KIT 153. Domestic cooking appliances safety kit
KIT 155 KIT 155. Conduit systems for cable management kit
KIT 156 KIT 156. Welding metallic materials kit
KIT 157 KIT 157. Preparation and presentation of product specifications. (Supplement to KIT 112 - Design management kit)
KIT 158 KIT 158. Control circuit devices and switching elements kit
KIT 159 KIT 159. Steel tubes technical delivery conditions kit
KIT 160 KIT 160. Medical devices kit
BS ISO 7341:2005 BS ISO 7341:2005. Banking. Nostro accounts reconciliation
05/30123732 DC 05/30123732 DC. EN ISO 22476-4. Geotechnical investigation and testing. Field testing. Part 4. Menard pressuremeter test
05/30123736 DC 05/30123736 DC. EN ISO 22476-5. Geotechnical investigation and testing. Field testing. Part 5. Flexible dilatometer test
05/30123744 DC 05/30123744 DC. EN ISO 22476-7. Geotechnical investigation and testing. Field testing. Part 7. Borehole jack test
BS EN 61000-4-11:2004 BS EN 61000-4-11:2004. Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests
05/30123804 DC 05/30123804 DC. EN ISO 22477-1. Geotechnical investigation and testing. Testing of geotechnical structures. Part 1. Pile load test by static axially loaded compression
04/30123843 DC 04/30123843 DC. IEC 60061-1 AMD 36. Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1. Lamp caps. Part 2. Lampholders. Part 3. Gauges
BS ISO 7876-5:2004 BS ISO 7876-5:2004. Fuel injection equipment. Vocabulary. Common rail fuel injection systems
ISO10508 : 2006 EDTN 2 ISO10508 : 2006 EDTN 2. ISO10508 : 2006 Plastics piping systems for hot and cold water installations -Guidance f or classification and design
BS EN 4234:2006 BS EN 4234:2006. Aerospace series. Clamps, worm drive. Dimensions, masses
KIT 154 KIT 154. Electric cables. PVC-insulated non-armoured cables kit
BS ISO 368:2006 BS ISO 368:2006. Spinning preparatory, spinning and doubling (twisting) machinery. Tubes for ring-spinning, doubling and twisting spindles, taper 1:38 and 1:64
04/30123913 DC 04/30123913 DC. EN 13307-2. Timber blanks and semi-finished profiles for non-structural uses. Part 2. Production control
BS EN 61300-3-10:2007 BS EN 61300-3-10:2007. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Gauge retention force
BS EN 61221:2004 BS EN 61221:2004. Petroleum products and lubricants. Triaryl phosphate ester turbine control fluids (category ISO-L-TCD). Specifications
BS EN 50446:2006 BS EN 50446:2006. Straight thermocouple assembly with metal or ceramic protection tube and accessories
PD CEN/TR 15018:2004 PD CEN/TR 15018:2004. Characterization of waste. Digestion of waste samples using alkali-fusion techniques
04/30123986 DC 04/30123986 DC. EN 50216-9. Power transformer and reactor fittings. Part 9. Oil to water heat exchanger
04/30123989 DC 04/30123989 DC. IEC 61643-11. Surge protection devices connected to low-voltage power distribution systems. Part 11. Performance requirements and testing methods
04/30124011 DC 04/30124011 DC. EN 15052. Resilient, textile and laminate floor coverings. Evaluation and requirements of volatile organic compounds (VOC) emissions
BS EN 13307-1:2006 BS EN 13307-1:2006. Timber blanks and semi-finished profiles for non-structural uses. Requirements
BS EN 61337-2:2004 BS EN 61337-2:2004. Filters using waveguide type dielectric resonators. Guide for use
04/30124031 DC 04/30124031 DC. IEC 61300-3-35 ED 1.0. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-35. Examinations and measurements. Fibre
BS EN ISO 5350-1:2006 BS EN ISO 5350-1:2006. Pulps. Estimation of dirt and shives. Inspection of laboratory sheets by transmitted light
BS EN ISO 5350-2:2006 BS EN ISO 5350-2:2006. Pulps. Estimation of dirt and shives. Inspection of mill sheeted pulp by transmitted light
BS ISO 18516:2006 BS ISO 18516:2006. Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Determination of lateral resolution
BS ISO 20903:2006 BS ISO 20903:2006. Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Methods used to determine peak intensities and information required wh
04/30124122 DC 04/30124122 DC. IEC 61076-2-101 ED.2. Connectors for electronic equipment. Part 2-101. Circular connectors. Detail specification for M12 connectors with screw-locking for low voltage ap
04/30124126 DC 04/30124126 DC. IEC 61076-2-104 ED.1. Connectors for electronic equipment. Part 2-104. Circular connectors. Detail specification for M8 connectors with screw or snap-locking for low vol
BS EN 50411-2-4:2006 BS EN 50411-2-4:2006. Fibre organisers and closures to be used in optical fibre communication systems. Product specifications. Sealed dome fibre splice closures type 1, for catego
BS EN ISO 6497:2005 BS EN ISO 6497:2005. Animal feeding stuffs. Sampling
BS IEC 61691-1-1:2004 BS IEC 61691-1-1:2004. Behavioural languages. VHDL language reference manual
BS EN 12608:2003 BS EN 12608:2003. Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors. Classification, requirements and test methods
BSENISO10423 : 2004 (CD-ROM) BSENISO10423 : 2004 (CD-ROM). Petroleum and natural gas industries. Drilling and production equipment. Wellhead and christmas tree equipment
BSENISO10423 : 2004 (COVERS) BSENISO10423 : 2004 (COVERS). Petroleum and natural gas industries. Drilling and production equipment. Wellhead and christmas tree equipment
PD 5482-3:2005 PD 5482-3:2005. Code of practice for domestic butane and propane gas-burning installations. Installations in boats, yachts and other vessels
BS 4841-4:2006 BS 4841-4:2006. Rigid polyurethane (PUR) and polyisocyanurate (PIR) products for building end-use applications. Specification for laminated insulation boards (roofboards) with auto-adhe
04/30124208 DC 04/30124208 DC. IEC 60730-1 ED.4. Automatic electrical controls for household and similar use. Part 1. General requirements
BS EN 1892:2005 BS EN 1892:2005. Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of tensile properties
BS EN 1893:2005 BS EN 1893:2005. Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure. Determination of tensile properties
BS EN 1894:2005 BS EN 1894:2005. Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of shear strength by compression loa
BS IEC 62138:2004 BS IEC 62138:2004. Nuclear power plants. Instrumentation and control important for safety. Software aspects for computer-based systems performing category B or C functions
BS EN 50104:2002 BS EN 50104:2002. Electrical apparatus for the detection and measurement of oxygen. Performance requirements and test methods
BS EN 14126:2003 BS EN 14126:2003. Protective clothing. Performance requirements and tests methods for protective clothing against infective agents
BS ISO 5538:2004 BS ISO 5538:2004. Milk and milk products. Sampling. Inspection by attributes
CWA 14174-2:2004 Version 2 CWA 14174-2:2004 Version 2. Financial transactional IC card reader ( FINREAD). Functional requirements
PD ISO/TR 18394:2006 PD ISO/TR 18394:2006. Surface chemical analysis. Auger electron spectroscopy. Derivation of chemical information
CWA 14174-3:2004 Version 2 CWA 14174-3:2004 Version 2. Financial transactional IC card reader (FINREAD). Security requirements
CWA 14174-5:2004 Version 2 CWA 14174-5:2004 Version 2. Financial transactional IC card reader (FINREAD). Download file format
CWA 14174-7:2004 Version 2 CWA 14174-7:2004 Version 2. Financial transactional IC card reader (FINREAD). Card reader application programming interfaces (APIs)
CWA 14174-8:2004 Version 2 CWA 14174-8:2004 Version 2. Financial transactional IC card reader (FINREAD). Client application programming interfaces (APIs)
BS EN ISO 19432:2006 BS EN ISO 19432:2006. Building construction machinery and equipment. Portable, hand-held, internal combustion engine driven cut-off machines. Safety requirements and testing
BS EN ISO 19957:2004 BS EN ISO 19957:2004. Footwear. Test methods for heels. Heel pin holding strength
BS EN 1256:2006 BS EN 1256:2006. Gas welding equipment. Specification for hose assemblies for equipment for welding, cutting and allied processes
04/30124310 DC 04/30124310 DC. ISO/IEC 24824-2. Information technology. Generic applications of ASN 1. Part 2. Fast web services
BS ISO 7299-1:2007 BS ISO 7299-1:2007. Diesel engines. End-mounting flanges for pumps. Fuel injection pumps
DD CEN/TS 15260:2006 DD CEN/TS 15260:2006. Health informatics. Classification of safety risks from health informatics products
BS 6349-8:2007 BS 6349-8:2007. Maritime structures. Code of practice for the design of Ro-Ro ramps, linkspans and walkways
BS ISO 9186-1:2007 BS ISO 9186-1:2007. Graphical symbols. Test methods. Methods for testing comprehensibility
ISO/IEC23002-1 : 2006 EDTN1 ISO/IEC23002-1 : 2006 EDTN1. ISO/IEC 11172-6 Information technology - MPEG video technologies. Part 1 : Accuracy requirements for implementation of integer-output 8x8 inver
BS EN 14185-2:2006 BS EN 14185-2:2006. Non fatty foods. Determination of N-methylcarbamate residues. HPLC method with clean-up on a diatomaceous earth column
BS ISO 15470:2004 BS ISO 15470:2004. Surface chemical analysis. X-ray photoelectron spectroscopy. Description of selected instrumental performance parameters
BS ISO 15471:2004 BS ISO 15471:2004. Surface chemical analysis. Auger electron spectroscopy. Description of selected instrumental performance parameters
BS ISO 17331:2004 BS ISO 17331:2004. Surface chemical analysis. Chemical methods for the collection of elements from the surface of silicon-wafer working reference materials and their determination by
PD ISO/TR 19319:2003 PD ISO/TR 19319:2003. Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Determination of lateral resolution, analysis area, and sample a
BS EN 14035-38:2006 BS EN 14035-38:2006. Fireworks. Shot tubes. Specification and test methods
BS EN ISO 6245:2002, BS 2000-4:2002 BS EN ISO 6245:2002, BS 2000-4:2002. Methods of test for petroleum and its products. BS 2000-4: Determination of ash
BS EN 60519-9:2005 BS EN 60519-9:2005. Safety in electroheat installations. Particular requirements for high-frequency dielectric heating installations
BS EN ISO 9936:2006 BS EN ISO 9936:2006. Animal and vegetable fats and oils. Determination of tocopherol and tocotrienol contents by high-performance liquid chromatography
BS EN 15079:2007 BS EN 15079:2007. Copper and copper alloys. Analysis by spark source optical emission spectrometry (S-OES)
04/30124505 DC 04/30124505 DC. EN 15080-8. Extended application of results from fire resistance tests. Part 8. Beams
04/30124508 DC 04/30124508 DC. EN 15080-12. Extended application of results from fire resistance tests. Part 12. Penetration seals
04/30124515 DC 04/30124515 DC. EN 1366-10. Fire resistance tests for service installations. Part 10. Smoke control dampers
BS ISO 20552:2007 BS ISO 20552:2007. Workplace air. Determination of mercury vapour. Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrom
BS EN 1483:2007 BS EN 1483:2007. Water quality. Determination of mercury. Method using atomic absorption spectrometry
BS EN 50065-2-1:2003 BS EN 50065-2-1:2003. Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz. Immunity requirements for mains communications equipment and sy
BS EN ISO 5659-2:2006 BS EN ISO 5659-2:2006. Plastics. Smoke generation. Determination of optical density by a single-chamber test
DD ISO/TS 22028-2:2006 DD ISO/TS 22028-2:2006. Photography and graphic technology. Extended colour encodings for digital image storage, manipulation and interchange. Reference output medium metric RGB
DD ISO/TS 22028-3:2006 DD ISO/TS 22028-3:2006. Photography and graphic technology. Extended colour encodings for digital image storage, manipulation and interchange. Reference input medium metric RGB
05/30124589 DC 05/30124589 DC. EN 1094-7. Insulating refractory products. Part 7. Methods of test for ceramic fibre products
05/30124595 DC 05/30124595 DC. EN 1094-8. Insulating refractory products. Part 8. Terminology for alkaline earth silicate (AES) wool products
05/30124598 DC 05/30124598 DC. EN 1094-9. Insulating refractory products. Part 9. Methods of test for alkaline earth silicate (AES) wool products
BS EN 12873-2:2005 BS EN 12873-2:2005. Influence of materials on water intended for human consumption. Influence due to migration. Test method for non-metallic and non-cementitious site-applied materi
06/30124648 DC 06/30124648 DC. ISO 15366. Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic and isotopic-dilution analysis by solvent extraction chrom
BIP 0030:2004 BIP 0030:2004. Achieving BS 15000. Management decisions
BIP 0031:2005 BIP 0031:2005. Achieving BS 15000. Why people matter
BIP 0032:2005 BIP 0032:2005. Achieving BS 15000. Making metrics work
BIP 0033:2005 BIP 0033:2005. Achieving BS 15000. Managing end-to-end service
BIP 0034:2005 BIP 0034:2005. Achieving BS 15000. Finance for service managers
BIP 0035:2006 BIP 0035:2006. Achieving ISO/IEC 20000. Enabling change
BIP 0036:2006 BIP 0036:2006. Achieving ISO/IEC 20000. Keeping the service going
BIP 0037:2006 BIP 0037:2006. Achieving ISO/IEC 20000. Capacity management
BIP 0038:2006 BIP 0038:2006. Achieving ISO/IEC 20000. Integrated service management
BS EN ISO 13500:2006 BS EN ISO 13500:2006. Petroleum and natural gas industries. Drilling fluid materials. Specifications and tests
PAS 65:2004 PAS 65:2004. Management of public swimming pools. General management. Code of practice
BS EN 61558-2-15:2001 BS EN 61558-2-15:2001. Safety of power transformers, power supply units and similar. Particular requirements for isolating transformers for the supply of medical locations
04/30124829 DC 04/30124829 DC. EN 15070. Strip wound flexible safety metallic hose assemblies for the connection of domestic appliances using gaseous fuels
BS 5266-1:2005 BS 5266-1:2005. Emergency lighting. Code of practice for the emergency lighting of premises
BS ISO/IEC 15434:2005 BS ISO/IEC 15434:2005. Information technology. Syntax for high-capacity automatic data capture (ADC) media
BS EN 685:2005 BS EN 685:2005. Resilient, textile and laminate floor coverings. Classification
BS ISO 14743:2004 BS ISO 14743:2004. Pneumatic fluid power. Push-in connectors for thermoplastic tubes
BS ISO 16874:2004 BS ISO 16874:2004. Hydraulic fluid power. Identification of manifold assemblies and their components
BSEN61158-6 : 2004 (CD-ROM) BSEN61158-6 : 2004 (CD-ROM).
BSEN61158-6 : 2004 (COVERS) BSEN61158-6 : 2004 (COVERS). Digital data communications for measurement and control. Fieldbus for use in industrial control systems
BS EN ISO 11339:2005 BS EN ISO 11339:2005. Adhesives. T-peel test for flexible-to-flexible bonded assemblies
DD CEN/TS 15087:2005 DD CEN/TS 15087:2005. Determination of the uplift resistance of installed clay and concrete interlocking tiles for roofing. Test method for mechanical fasteners
BS EN ISO 11343:2005 BS EN ISO 11343:2005. Adhesives. Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions. Wedge impact method
BS EN 117:2005 BS EN 117:2005. Wood preservatives. Determination of toxic values against Reticulitermes species (European termites) (laboratory method)
PD CEN/TR 13200-2:2005 PD CEN/TR 13200-2:2005. Spectator facilities. Layout criteria of service area. Characteristics and national situations
BS EN 118:2005 BS EN 118:2005. Wood preservatives. Determination of preventive action against Reticulitermes species (European termites) (laboratory method)
BS EN 1333:2006 BS EN 1333:2006. Flanges and their joints. Pipework components. Definition and selection of PN
BS EN ISO 11554:2006 BS EN ISO 11554:2006. Optics and photonics. Lasers and laser-related equipment. Test methods for laser beam power, energy and temporal characteristics
ISO1017 : 2006 EDTN3 ISO1017 : 2006 EDTN3. ISO1017 : 2006 Brown coals and lignites - Determination of acetone- soluble material(resinous substances) in the benzene- soluble extract
BS EN 623-1:2006 BS EN 623-1:2006. Advanced technical ceramics. Monolithic ceramics. General and textural properties. Determination of the presence of defects by dye penetration
BS EN ISO 15732:2005 BS EN ISO 15732:2005. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for fracture toughness of monolithic ceramics at room temperature by single edge
BS EN ISO 18756:2005 BS EN ISO 18756:2005. Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of fracture toughness of monolithic ceramics at room temperature by the surface
BS ISO/IEC 25062:2006 BS ISO/IEC 25062:2006. Software engineering. Software product. Quality requirements and evaluation (SQuaRE). Common industry format (CIF) for usability test reports
06/30124959 DC 06/30124959 DC. ISO 21483. Determination of solubility in nitric acid of Plutonium in unirradiated mixed-oxide fuel pellets (U, Pu) O2
PD 5500:2006+A3:2008 PD 5500:2006+A3:2008. Specification for unfired fusion welded pressure vessels
BS 4841-5:2006 BS 4841-5:2006. Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications. Specification for laminated boards (roofboards) with auto-adhesively or s
BS 4841-6:2006 BS 4841-6:2006. Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications. Specification for laminated boards with auto-adhesively or separately bon
BS 7799-3:2006 BS 7799-3:2006. Information security management systems. Guidelines for information security risk management
BS EN 15086:2006 BS EN 15086:2006. Foodstuffs. Determination of isomalt, lactitol, maltitol, mannitol, sorbitol and xylitol in foodstuffs
BS ISO 15838:2003 BS ISO 15838:2003. Ships and marine technology. Fittings for use with gasketed mechanical couplings used in piping applications. Performance specification.
BS ISO/IEC 15909-1:2004 BS ISO/IEC 15909-1:2004. Software and system engineering. High-level Petri nets. Concepts, definitions and graphical notation
BS ISO 9974-4:2006 BS ISO 9974-4:2006. Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing. Dimensions, design, test method
BS EN 14458:2004 BS EN 14458:2004. Personal eye-equipment. Faceshields and visors for use with firefighters and high performance industrial safety helmets used by firefighters, ambulance and emergency
BS EN 572-1:2004 BS EN 572-1:2004. Glass in building. Basic soda lime silicate glass products. Definitions and general physical and mechanical properties
BS ISO/IEC 7816-3:2006 BS ISO/IEC 7816-3:2006. Identification cards. Integrated circuit cards. Cards with contacts. Electrical interface and transmission protocols
BS EN 62343-1-3:2006 BS EN 62343-1-3:2006. Dynamic modules. Performance standards. Dynamic gain tilt equalizer with pigtails for use in controlled environments (category C)
BS EN 61557-1:2007 BS EN 61557-1:2007. Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures. Ge
BS EN 61557-2:2007 BS EN 61557-2:2007. Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures. In
BS EN 61300-3-14:2007 BS EN 61300-3-14:2007. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Accuracy and repeatabilit
BS EN 61557-4:2007 BS EN 61557-4:2007. Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures. Re
BS EN 61557-5:2007 BS EN 61557-5:2007. Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures. Re
BS EN 61557-7:2007 BS EN 61557-7:2007. Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures. Ph
ISO2725-2 : 2007 EDTN2 ISO2725-2 : 2007 EDTN2. ISO2725-2 : 2007 Assembly tools for screws and nuts - Square drive sockets. Part 2: Dimensions for machine-operated sockets ("impact")
BS ISO 5068-1:2007 BS ISO 5068-1:2007. Brown coals and lignites. Determination of moisture content. Indirect gravimetric method for total moisture
BS ISO 5068-2:2007 BS ISO 5068-2:2007. Brown coals and lignites. Determination of moisture content. Indirect gravimetric method for moisture in the analysis sample
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
