BS X 35:1998 BS X 35:1998. Specification for selectively removable intermediate coating for aerospace purposes
BS X 36:1998 BS X 36:1998. Specification for paint remover for air drying selectively removable paint scheme for aerospace purposes
BS EN 1661:1998 BS EN 1661:1998. Hexagon nuts with flange
BS EN 45510-5-4:1998 BS EN 45510-5-4:1998. Guide for the procurement of power station equipment. Hydraulic turbines, storage pumps and pump-turbines
BS EN 1559-5:1998 BS EN 1559-5:1998. Founding. Technical conditions of delivery. Additional requirements for magnesium alloy castings
BS 5266-2:1998 BS 5266-2:1998. Emergency lighting. Code of practice for electrical low mounted way guidance systems for emergency use
BS EN 60870-6-802:1998, IEC 60870-6-802:1997 BS EN 60870-6-802:1998, IEC 60870-6-802:1997. Telecontrol equipment and systems. Telecontrol protocols compatible with ISO standards and ITU-T recommendati
BS EN 60870-6-503:1998, IEC 60870-6-503:1997 BS EN 60870-6-503:1998, IEC 60870-6-503:1997. Telecontrol equipment and systems. Telecontrol protocols compatible with ISO standards and ITU-T recommendati
BS ISO/IEC 10514-2:1998 BS ISO/IEC 10514-2:1998. Information technology. Programming languages. Modula-2, generics in Modula-2
BS ISO/IEC 10514-3:1998 BS ISO/IEC 10514-3:1998. Information technology. Programming languages. Modula-2, object-oriented Modula-2
BS ISO 14808:1997 BS ISO 14808:1997. Photography. Composition of 135-film canisters
BS 684-2.46:1998, ISO 9936:1997 BS 684-2.46:1998, ISO 9936:1997. Methods of analysis of fats and fatty oils. Other methods. Determination of tocopherols and tocotrienols contents
BS EN ISO 11593:1998 BS EN ISO 11593:1998. Manipulating industrial robots. Automatic end effector systems. Vocabulary and presentation of characteristics
BS ISO 6196-3:1997 BS ISO 6196-3:1997. Micrographics. Vocabulary. Film processing
BS ISO 9897:1997 BS ISO 9897:1997. Freight containers. Container equipment data exchange (CEDEX). General communication codes
BS EN 10056-1:1999 BS EN 10056-1:1999. Specification for structural steel equal and unequal angles. Dimensions
BS ISO 4834:1997 BS ISO 4834:1997. Cinematography. Magnetic sound test films excluding striped release prints. Basic technical characteristics
BS 3S 145:1996 BS 3S 145:1996. Specification for chromium-nickel-copper-molybdenum corrosion resisting steel (precipitation hardening) billets, bars, forgings and parts (1270 MPa to 1470 MPa)
BS ISO 11345:1997, BS 903-A65:1998 BS ISO 11345:1997, BS 903-A65:1998. Rubber. Assessment of carbon black dispersion. Rapid comparative methods
BS ISO 10897:1996 BS ISO 10897:1996. Collets for tool holders with taper ratio 1:10. Collets, holders, nuts
BS EN 12256:1998, BS 2782-11:Method 1111F:1998 BS EN 12256:1998, BS 2782-11:Method 1111F:1998. Plastic piping systems. Thermoplastic fittings. Test method for mechanical strength or flexibility of fab
BS EN 844-5:1997 BS EN 844-5:1997. Round and sawn timber. Terminology. Terms relating to dimensions of round timber
BS EN 844-2:1997 BS EN 844-2:1997. Round and sawn timber. Terminology. General terms relating to round timber
BS ISO 6133:1998 BS ISO 6133:1998. Rubber and plastics. Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
BS EN 186260:1998 BS EN 186260:1998. Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. Type SC
BS EN 60534-6-1:1998, IEC 60534-6-1:1997 BS EN 60534-6-1:1998, IEC 60534-6-1:1997. Industrial-process control valves. Mounting details for attachment of positioners to control valves. Positioner mount
BS EN ISO 15004:1998 BS EN ISO 15004:1998. Ophthalmic instruments. Fundamental requirements and test methods
BS ISO 3865:1997, BS 903-A33:1998 BS ISO 3865:1997, BS 903-A33:1998. Rubber, vulcanized or thermoplastic. Methods of test for staining in contact with organic material
BS EN 60034-9:1998, IEC 60034-9:1997 BS EN 60034-9:1998, IEC 60034-9:1997. Rotating electrical machines. Noise limits
BS EN 12006-2:1998 BS EN 12006-2:1998. Non-active surgical implants. Particular requirements for cardiac and vascular implants. Vascular prostheses including cardiac valve conduits
BS 4585-3:1998, ISO 928:1997 BS 4585-3:1998, ISO 928:1997. Methods of test for spices and condiments. Determination of total ash
BS EN 60814:1998, IEC 60814:1997 BS EN 60814:1998, IEC 60814:1997. Insulating liquids. Oil-impregnated paper and pressboard. Determination of water by automatic coulometric Karl Fischer titration
BS 5086-5:1998, ISO 1738:1997 BS 5086-5:1998, ISO 1738:1997. Analysis of butter. Method for determination of salt content
BS 1741-13:1998, ISO 11868:1997 BS 1741-13:1998, ISO 11868:1997. Methods for chemical analysis of liquid milk and cream. Determination of lactulose content of heat-treated milk (HPLC method)
BS 6102-5:1998, ISO 5775-1:1997 BS 6102-5:1998, ISO 5775-1:1997. Cycles. Specification for bicycle tyre designations and dimensions
BS ISO 10914:1996 BS ISO 10914:1996. Assembly tools for screws and nuts. Sockets and wrenches for spline drive
BS ISO 3338-2:1996 BS ISO 3338-2:1996. Cylindrical shanks for milling cutters. Dimensional characteristics of flatted cylindrical shanks
BS ISO 3338-1:1996 BS ISO 3338-1:1996. Cylindrical shanks for milling cutters. Dimensional characteristics of plain cylindrical shanks
97/543978DC 97/543978DC. Safety of machinery. Ergonomic design principles. Part 2. Interactions between the design of machinery and work tasks (prEN 614-2). Part 2: Interactions between the design of
97/231768DC 97/231768DC. IEC 61209. Maritime navigation and radiocommunication equipment and systems. Integrated bridge systems (IBS). Operational and performance requirements, methods of testing and
BS EN 674:1998 BS EN 674:1998. Glass in building. Determination of thermal transmittance (U value). Guarded hot plate method
BS EN 675:1998 BS EN 675:1998. Glass in building. Determination of thermal transmittance (U value). Heat flow meter method
97/719872DC 97/719872DC. Technical product documentation. Protection marks for restricting the use of documents and products (ISO/CD 16016)
BS EN 131800:1998 BS EN 131800:1998. Harmonized system of quality assessment for electronic components. Sectional specification: fixed polypropylene film dielectric metal foil d.c. capacitors
BS EN 131801:1998 BS EN 131801:1998. Harmonized system of quality assessment for electronic components. Blank detail specification: fixed polypropylene film dielectric metal foil d.c. capacitors. Asse
BS EN 131802:1998 BS EN 131802:1998. Harmonized system of quality assessment for electronic components. Blank detail specification: fixed polypropylene film dielectric metal foil d.c. capacitors. Asse
BS EN 130900:1998 BS EN 130900:1998. Harmonized system of quality assessment for electronic components. Sectional specification: fixed polystyrene film dielectric metal foil d.c. capacitors
BS EN 130901:1998 BS EN 130901:1998. Harmonized system of quality assessment for electronic components. Blank detail specification: fixed polystyrene film dielectric metal foil d.c. capacitors. Assess
BS EN 130902:1998 BS EN 130902:1998. Harmonized system of quality assessment for electronic components. Blank detail specification: fixed polystyrene film dielectric metal foil d.c. capacitors. Assess
BS EN ISO 11985:1998 BS EN ISO 11985:1998. Ophthalmic optics. Contact lenses. Ageing by exposure to UV and visible radiation (in vitro method)
BS EN 12475-3:1998, BS 7225-1-1.4:1998 BS EN 12475-3:1998, BS 7225-1-1.4:1998. Classification of dense shaped refractory products. Basic products containing from 7% to 30% residual carbon
BS EN 12475-2:1998, BS 7225-1.3:1998 BS EN 12475-2:1998, BS 7225-1.3:1998. Classification of dense shaped refractory products. Basic products containing less than 7% residual carbon
BS EN 12475-1:1998, BS 7225-1.2:1998 BS EN 12475-1:1998, BS 7225-1.2:1998. Classification of dense shaped refractory products. Alumina-silica products
BS ISO 13359:1998 BS ISO 13359:1998. Measurement of conductive liquid flow in closed conduits. Flanged electromagnetic flowmeters. Overall length
BS ISO/TR 12765:1998 BS ISO/TR 12765:1998. Measurement of fluid flow in closed conduits. Methods using transit-time ultrasonic flowmeters
BS 3936-9:1998 BS 3936-9:1998. Nursery stock. Specification for bulbs, corms and tubers
BS EN 10090:1998 BS EN 10090:1998. Valve steels and alloys for internal combustion engines
BS ISO 10110-13:1997 BS ISO 10110-13:1997. Optics and optical instruments. Preparation of drawings for optical elements and systems. Laser irradiation damage threshold
BS 5202-19:1998, ISO 6488-1:1997 BS 5202-19:1998, ISO 6488-1:1997. Methods for chemical analysis of tobacco and tobacco products. Determination of water content (Karl Fischer method)
BS ISO/IEC 10021-2:1996 BS ISO/IEC 10021-2:1996. Information technology. Message handling systems (MHS). Overall architecture
WD/97/109371DC WD/97/109371DC. prEN 13049. Windows. Soft and heavy body impact. Test method, safety requirements and classification
BS 3G 198-4:1996 BS 3G 198-4:1996. Sleeves for aircraft electric cables and equipment wires. Specification for fluoropolymer heat shrinkable sleeving for binding and insulation
BS EN 181103:1998 BS EN 181103:1998. Harmonized system of quality assessment for electronic components. Blank detail specification: fibre optic branching devices. Type: non wavelength selective transm
BS EN 181104:1998 BS EN 181104:1998. Harmonized system of quality assessment for electronic components. Blank detail specification: fibre optic branching devices. Type: wavelength selective transmissi
BS EN 61628-1:1998, IEC 61628-1:1997 BS EN 61628-1:1998, IEC 61628-1:1997. Corrugated pressboard and presspaper for electrical purposes. Definitions, designations and general requirements
PD 7010:1997 PD 7010:1997. Essential requirements for a handset telephony facility provided by terminal equipment intended for direct connection to an analogue interface of the public switched telepho
97/231815DC 97/231815DC. Amendment No.1 for IEC 60297-4 (1995) Part 4. Subracks and associated plug-in units. Additional dimensions (IEC document 48D/139/CDV). Subracks and associated plug-in units -
97/210634DC 97/210634DC. BS 1363:Part 1:1995. 13A plugs, socket outlets, adaptors and connection units. Part 1. Specification for rewireable and non-rewireable 13A plugs. Specification for rewirable a
97/210729DC 97/210729DC. IEC 60127-1 series. IEC 60127-1:1988. Miniature fuses. Part 1. Definitions for miniature fuses and general requirements for miniature fuse-links. IEC 60127-2:1989. Miniature f
97/109348DC 97/109348DC. BS EN 12697-15. Bituminous mixtures. Test methods for hot mix asphalt. Part 15. Determination of the segregation sensitivity of bituminous mixtures (prEN 12697-15:1997). Part
wd/97/107905DC wd/97/107905DC. prEN 13024-1. Glass in building. Thermally toughened borosilicate safety glass. Part 1. Specifications. Part 1 : Specifications
97/107906 DC 97/107906 DC. prEN 13022-1. Glass in building. Structural sealant glazing. Part 1. Actions, requirements and terminology
97/107907 DC 97/107907 DC. prEN 13022-2. Glass in building. Structural sealant glazing. Part 2. Glass
97/107909 DC 97/107909 DC. prEN 13022-4. Glass in building. Structural sealant glazing. Part 4. Assembly rules
97/109811 DC 97/109811 DC. prEN 13120. Internal blinds. Performance requirements
BS 5656-1:1997 BS 5656-1:1997. Safety rules for the construction and installation of escalators and passenger conveyors. Specification and proformas for test and examination of new installations
WD/97/109813DC WD/97/109813DC. prEN 13116. Curtain walling. Resistance to wind load
97/720071DC 97/720071DC. Transportable welded steel cylinders for Liquefied petroleum gas (LPG). Procedures for checking at time of filling (ISO/DIS 10691)
97/720067DC 97/720067DC. Design method for ductile iron pipes (ISO/DIS 10803)
97/720345DC 97/720345DC. Aerospace series. Rod bodies, flight control in aluminium alloy, for adjustable end fittings. Part 1. Dimensions and loads (prEN 2290-1)
BS 5763-17:1996, ISO 10272:1995 BS 5763-17:1996, ISO 10272:1995. Methods for microbiological examination of food and animal feeding stuffs. Detection of thermotolerant Campylobacter
97/544090DC 97/544090DC. Respiratory protective devices. Full face masks connected with head protection for use as part of a respiratory protective device by fire fighters. Requirements, testing, mark
BS EN 676:1997 BS EN 676:1997. Automatic forced draught burners for gaseous fuels
97/565181DC 97/565181DC. Guide to graphical symbols for use on electrical equipment
BS 7911:1998 BS 7911:1998. Specification for organizations conducting market research
BS IEC 60748-2:1997 BS IEC 60748-2:1997. Semiconductor devices. Integrated circuits. Digital integrated circuits
BS CECC 23100-003:1996 BS CECC 23100-003:1996. Harmonized system of quality assessment for electronic components. Capability detail specification: single and double sided printed boards with plain hol
BS CECC 23200-003:1996 BS CECC 23200-003:1996. Harmonized system of quality assessment for electronic components. Capability detail specification: single and double sided printed boards with plated th
BS CECC 23300-003:1996 BS CECC 23300-003:1996. Harmonized system of quality assessment for electronic components. Capability detail specification: multilayer printed boards
BS IEC 61336:1996 BS IEC 61336:1996. Nuclear instrumentation. Thickness measurement systems utilizing ionizing radiation. Definitions and test methods
BS EN 45020:1998 BS EN 45020:1998. Standardization and related activities. General vocabulary
BS EN 45014:1998 BS EN 45014:1998. General criteria for supplier's declaration of conformity
BS ISO 3897:1997 BS ISO 3897:1997. Photography. Processed photographic plates. Storage practices
BS ISO 7176-4:1997 BS ISO 7176-4:1997. Wheelchairs. Energy consumption of electric wheelchairs and scooters for determination of theoretical distance range
BS EN 61800-1:1998, IEC 61800-1:1997 BS EN 61800-1:1998, IEC 61800-1:1997. Adjustable speed electrical power drive systems. Rating specifications for low voltage adjustable speed d.c. power drive syst
97/126712DC 97/126712DC. BS 7079:Part E13. Preparation of steel substrates before application of paints and related products. Metallic blast-cleaning abrasives. Part E13. Determination of abrasive mec
BS ISO 9102:1997 BS ISO 9102:1997. Diesel engines. Screw-in injection nozzle holders types 24, 25, 26 and 26.1
BS 7403-1:1998, ISO 4548-1:1997 BS 7403-1:1998, ISO 4548-1:1997. Full-flow lubricating oil filters for internal combustion engines. Methods of test for differential pressure/flow characteristics
BS 7403-2:1998, ISO 4548-2:1997 BS 7403-2:1998, ISO 4548-2:1997. Full-flow lubricating oil filters for internal combustion engines. Method of test for element by-pass valve characteristics
BS 7403-3:1998, ISO 4548-3:1997 BS 7403-3:1998, ISO 4548-3:1997. Full-flow lubricating oil filters for internal combustion engines. Methods of test for resistance to high differential pressure and to
BS 7403-4:1998, ISO 4548-4:1997 BS 7403-4:1998, ISO 4548-4:1997. Full-flow lubricating oil filters for internal combustion engines. Methods of test for initial particle retention efficiency, life and
BS EN ISO 8861:1998 BS EN ISO 8861:1998. Shipbuilding. Engine-room ventilation in diesel-engined ships. Design requirements and basis of calculations
BS ISO 4037-1:1996 BS ISO 4037-1:1996. X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy. Radiation chara
BS EN ISO 140-8:1998 BS EN ISO 140-8:1998. Acoustics. Measurement of sound insulation in buildings and of building elements. Laboratory measurements of the reduction of transmitted impact noise by flo
BS ISO 11564:1998 BS ISO 11564:1998. Stationary source emissions. Determination of the mass concentration of nitrogen oxides. Naphthylethylenediamine photometric method
BS ISO 11632:1998 BS ISO 11632:1998. Stationary source emissions. Determination of mass concentration of sulfur dioxide. Ion chromatography method
BS 7913:1998 BS 7913:1998. Guide to the principles of the conservation of historic buildings
98/700513DC 98/700513DC. Petroleum and natural gas industries. Cements and materials for well cementing (prEN ISO 10426-1). Specification
BS EN 1272:1998 BS EN 1272:1998. Child care articles. Table mounted chairs. Safety requirements and test methods
BS EN 1727:1998 BS EN 1727:1998. Domestic furniture. Storage furniture. Safety requirements and test methods
DD ENV 12936:1998 DD ENV 12936:1998. Feather and down. Determination of the permanent deformation after dynamic fatigue stress under constant load
BS EN 131700:1998 BS EN 131700:1998. Harmonized system of quality assessment for electronic components. Sectional specification: Fixed capacitors for direct current with electrodes of thin metal foils
BS EN 1013-1:1998 BS EN 1013-1:1998. Light transmitting profiled plastic sheeting for single skin roofing. General requirements and test methods
BS EN 1013-3:1998 BS EN 1013-3:1998. Light transmitting profiled plastic sheeting for single skin roofing. Specific requirements and test methods for sheets of polyvinyl chloride (PVC)
BS EN 1391:1998 BS EN 1391:1998. Adhesives for leather and footwear materials. A method for evaluating the bondability of materials. Minimum requirements and material classification
BS EN 1246:1998 BS EN 1246:1998. Adhesives. Determination of ash and sulfated ash
BS EN 1244:1998 BS EN 1244:1998. Adhesives. Determination of the colour and/or colour changes of adhesive coats under the influence of light
BS EN 1242:1998 BS EN 1242:1998. Adhesives. Determination of isocyanate content
BS EN 1241:1998 BS EN 1241:1998. Adhesives. Determination of acid value
BS EN 1240:1998 BS EN 1240:1998. Adhesives. Determination of hydroxyl value and/or hydroxyl content
BS EN 1239:1998 BS EN 1239:1998. Adhesives. Freeze-thaw stability
BS EN 923:1998 BS EN 923:1998. Adhesives. Terms and definitions
BS EN 522:1998 BS EN 522:1998. Adhesives for leather and footwear materials. Bond strength. Minimum requirements and adhesive classification
BS 7012-11:1998, ISO 12853:1997 BS 7012-11:1998, ISO 12853:1997. Light microscopes. Information provided to the user
BS EN 1392:1998 BS EN 1392:1998. Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Test methods for measuring the bond strength under specified conditions
BS 7012-6:1998, ISO 8577:1997 BS 7012-6:1998, ISO 8577:1997. Light microscopes. Specification for spectral filters
BS EN 793:1998 BS EN 793:1998. Particular requirements for safety of medical supply units
BS EN ISO 11306:1998 BS EN ISO 11306:1998. Corrosion of metals and alloys. Guidelines for exposing and evaluating metals and alloys in surface sea water
BS EN 1393:1997, BS 2782-12:Methods 1210A to C BS EN 1393:1997, BS 2782-12:Methods 1210A to C. Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of initial lo
BS 6916-7:1998, ISO 7293:1997 BS 6916-7:1998, ISO 7293:1997. Chain saws. Method of evaluating engine performance including fuel consumption
BS ISO 8893:1997 BS ISO 8893:1997. Forestry machinery. Portable brush cutters and grass trimmers. Engine performance and fuel consumption
BS 7755-4.2.2:1998, ISO 11268-2:1998 BS 7755-4.2.2:1998, ISO 11268-2:1998. Soil quality. Biological methods. Effects of pollutants on soil fauna. Determination of effects on reproduction on earthworms
BS EN ISO 10993-2:1998 BS EN ISO 10993-2:1998. Biological evaluation of medical devices. Animal welfare requirements
BS EN ISO 13759:1997, BS 2000-430:1997,ISO 13759:1996 BS EN ISO 13759:1997, BS 2000-430:1997,ISO 13759:1996. Methods of test for petroleum and its products. Petroleum products. Determination of alkyl
BS EN ISO 13758:1997, BS 2000-395:1997,ISO 13758:1996 BS EN ISO 13758:1997, BS 2000-395:1997,ISO 13758:1996. Methods of test for petroleum and its products. Liquefied petroleum gases. Assessment of th
BS 2000-156:1997, ISO 3837:1993 BS 2000-156:1997, ISO 3837:1993. Methods of test for petroleum and its products. Liquid petroleum products. Determination of hydrocarbon types. Fluorescent indicator ad
BS 2000-48:1997 BS 2000-48:1997. Methods of test for petroleum and its products. Determination of oxidation characteristics of lubricating oil
BS EN ISO 4264:1997, BS 2000-380:1997,ISO 4264:1995 BS EN ISO 4264:1997, BS 2000-380:1997,ISO 4264:1995. Methods of test for petroleum and its products. Petroleum products. Calculation of cetane index
BS EN 1918-5:1998 BS EN 1918-5:1998. Gas supply systems. Underground gas storage. Functional recommendations for surface facilities
BS EN 1918-3:1998 BS EN 1918-3:1998. Gas supply systems. Underground gas storage. Functional recommendations for storage in solution-mined salt cavities
BS EN 1918-4:1998 BS EN 1918-4:1998. Gas supply systems. Underground gas storage. Functional recommendations for storage in rock caverns
BS EN 1918-2:1998 BS EN 1918-2:1998. Gas supply systems. Underground gas storage. Functional recommendations for storage in oil and gas fields
BS EN 1918-1:1998 BS EN 1918-1:1998. Gas supply systems. Underground gas storage. Functional recommendations for storage in aquifers
BS ISO 13756:1997 BS ISO 13756:1997. Determination of silver in silver jewellery alloys. Volumetric (potentiometric) method using sodium chloride or potassium chloride
BS EN 1934:1998 BS EN 1934:1998. Thermal performance of buildings. Determination of thermal resistance by hot box method using heat flow meter. Masonry
BS EN 1601:1997, BS 2000-408:1997 BS EN 1601:1997, BS 2000-408:1997. Methods of test for petroleum and its products. Liquid petroleum products. Unleaded petrol. Determination of organic oxygenate comp
BS 2000-381:1997, ISO 3648:1994 BS 2000-381:1997, ISO 3648:1994. Methods of test for petroleum and its products. Aviation fuels. Estimation of net specific energy
98/700344DC 98/700344DC. Aerospace series. Requirementsand test procedures for relays and contactors. Part 407. Cold/low pressure and moist heat (prEN 2349-407). Cold/low pressure and moist heat
BS 7861-1:1996 BS 7861-1:1996. Strata reinforcement support system components used in coal mines. Specification for rockbolting
BS 1042:Part 1:Section 1.5:1997 BS 1042:Part 1:Section 1.5:1997. Measurement of fluid flow in closed conduits. Pressure differential devices. Guide to the effect of departure from the conditions speci
98/700242DC 98/700242DC. Aerospace series. Electrical cables, installation protection sleeves test methods. Part 100. General (prEN 6059-100)
98/700243DC 98/700243DC. Aerospace series. Electrical cables, installation protection sleeves test methods. Part 201. Visual inspection (prEN 6059-201)
98/700244DC 98/700244DC. Aerospace series. Electrical cables, installation protection sleeves test methods. Part 202. Dimensions and mass (prEN 6059-202)
98/700245DC 98/700245DC. Aerospace series. Electrical cables, installation protection sleeves. Test methods. Part 203. Coverage (prEN 6059-203)
98/700248DC 98/700248DC. Aerospace series. Electrical cables, installation protection sleeves test methods. Part 303. Resistance to fluids (prEN 6059-303)
98/700249DC 98/700249DC. Aerospace series. Electrical cables, installation protection sleeves test methods. Part 304. Flammability (prEN 6059-304)
98/700252DC 98/700252DC. Aerospace series. Electrical cables, installation, protection sleeves. Test methods. Part 401. Expansion range (prEN 6059-401)
98/700251DC 98/700251DC. Aerospace series. Electrical cables, installation, protection sleeves. Test methods. Part 305. Mould growth (prEN 6059-306)
98/700257DC 98/700257DC. Aerospace series. Electrical cables, installation. Protection sleeves in meta-aramid fibres. Part 001. Technical specifications (prEN 6049-001)
98/700260DC 98/700260DC. Aerospace series. Electrical cables, installation, protection sleeves in meta-aramid fibres. Part 005. Sleeve flexible, post installation product standard (prEN 6049-005)
98/700840DC 98/700840DC. Cycles. Safety requirements for bicycles for young children
BS EN 12181:1998 BS EN 12181:1998. Oropharyngeal airways
BS 7921:1998 BS 7921:1998. Cone top cans of nominal volumes 125 ml to 1000 ml for liquid products. Specification
98/120043DC 98/120043DC. BS ISO 10346-1:199X. Laboratory glassware. Chemical analysis of soda-lime-silicate glass. Part 1. Determination of silicon dioxide by gravimetry and molecular absorption spect
98/120044DC 98/120044DC. BS ISO 10346-2:199X. Laboratory glassware. Chemical analysis of soda-lime-silicate glass. Part 2. Determination of aluminium oxide by complexometry and total iron (III) oxide
98/120045DC 98/120045DC. BS ISO 10346-3:199X. Laboratory glassware. Chemical analysis of soda-lime-silicate glass. Part 3. Determination of calcium oxide and magnesium oxide by complexometry (ISO 1034
BS 6499:1998 BS 6499:1998. Metal screw necks, screw caps and inner seals for metal containers. Specification
98/120046DC 98/120046DC. BS ISO 10346-4:199X. Laboratory glassware. Chemical analysis of soda-lime-silicate glass. Part 4. Determination of sodium oxide, potassium oxide, magnesium oxide, calcium oxid
98/120047DC 98/120047DC. BS ISO 10346-5:199X. Laboratory glassware. Chemical analysis of soda-lime-silicate glass. Part 5. Determination of total sulfur by gravimetric or volumetric analysis (ISO 1034
98/120048DC 98/120048DC. BS ISO 10346-6:199X. Laboratory glassware. Chemical analysis of soda-lime-silicate glass. Part 6. Chrome green glass. Determination of aluminium oxide by complexometry, iron (
98/200233DC 98/200233DC. IEC 61960-2. Secondary lithium cells and batteries for portable applications. Part 2. Secondary lithium batteries (IEC document 21A/230/CD). Secondary lithium batteries
PD 6621:1998 PD 6621:1998. Guidance on the new European test method standards for thermal insulation materials
BS EN ISO 4288:1998 BS EN ISO 4288:1998. Geometric product specification (GPS). Surface texture. Profile method: Rules and procedures for the assessment of surface texture
BS EN 12220:1998 BS EN 12220:1998. Ventilation for buildings. Ductwork. Dimensions of circular flanges for general ventilation
BS 1016-104.3:1998, ISO 562:1998 BS 1016-104.3:1998, ISO 562:1998. Methods for analysis and testing of coal and coke. Determination of volatile matter content
BS 1016-111:1998, ISO 12900:1998 BS 1016-111:1998, ISO 12900:1998. Methods for analysis and testing of coal and coke. Determination of abrasion index of coal
BS EN ISO 307:1998 BS EN ISO 307:1998. Plastics. Polyamides. Determination of viscosity number
BS EN 10240:1998 BS EN 10240:1998. Internal and/or external protective coatings for steel tubes. Specification for hot dip galvanized coatings applied in automatic plants
BS 7012-4.1:1998, ISO 8038-1:1997 BS 7012-4.1:1998, ISO 8038-1:1997. Light microscopes. Specification for microscope objective and nosepiece screw threads. Screw thread type RMS (4/5 in x 1/36 in)
BS 7882:1997 BS 7882:1997. Method for calibration and classification of torque measuring devices
KIT 52 KIT 52. TickIT guide offer pack 1
KIT 53 KIT 53. TickIT guide offer pack 2
98/200475DC 98/200475DC. EN 60335-2-14:1996/prA11:1998. Safety of household and similar electrical appliances. Part 2. Particular requirements for kitchen machines
97/565070DC 97/565070DC. Specification for non-prescriptive graduated support hosiery
98/120287DC 98/120287DC. BS ISO/TR 11974. Measurement of liquid flow in open channels. Electromagnetic current meters
98/701005DC 98/701005DC. Packaging. Bar code and two-dimensional symbols for shipping, transport and receiving labels (ISO/DIS 15394)
BS EN 12010:1998 BS EN 12010:1998. Non-active surgical implants. Joint replacement implants. Particular requirements
BS EN 12011:1998 BS EN 12011:1998. Instrumentation to be used in association with non-active surgical implants. General requirements
BS EN 1899-1:1998, BS 6068-2.63:1998 BS EN 1899-1:1998, BS 6068-2.63:1998. Water quality. Determination of biochemical oxygen demand after n days (BODn). Dilution and seeding method with allylthiourea
BS EN 1899-2:1998, BS 6068-2.64:1998 BS EN 1899-2:1998, BS 6068-2.64:1998. Water quality. Determination of biochemical oxygen demand after n days (BODn). Method for undiluted samples
BS EN 1746:1999 BS EN 1746:1999. Safety of machinery. Guidance for the drafting of the noise clauses of safety standards
BS Z 9:1998, ISO 13420:1997 BS Z 9:1998, ISO 13420:1997. Space data and information transfer systems. Advanced orbiting systems. Networks and data links. Architectural specification
BS Z 8:1998, ISO 13419:1997 BS Z 8:1998, ISO 13419:1997. Space data and information transfer systems. Packet telemetry
BS Z 6:1998, ISO 14961:1997 BS Z 6:1998, ISO 14961:1997. Space data and information transfer systems. Parameter value language specification
BS Z 7:1998, ISO 14962:1997 BS Z 7:1998, ISO 14962:1997. Space data and information transfer systems. ASCII encoded English
BS ISO 11377:1998 BS ISO 11377:1998. Textile floor coverings. Floor soiling. Test site set-up and soiling evaluation
BS ISO 11379:1997 BS ISO 11379:1997. Textile floor coverings. Laboratory cleaning procedure using spray extraction
BS 1692:1998 BS 1692:1998. Specification for gin blocks
BS EN ISO 11987:1998, BS 7208-14:1998 BS EN ISO 11987:1998, BS 7208-14:1998. Ophthalmic optics. Contact lenses. Determination of shelf-life
BS ISO/IEC 15507:1997 BS ISO/IEC 15507:1997. Information technology. Telecommunications and information exchange between systems. Private Integrated Services Network. Inter-exchange signalling protoco
BS EN 1394:1997, BS 2782-12:Meth1211A to F:1997 BS EN 1394:1997, BS 2782-12:Meth1211A to F:1997. Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the appa
BS ISO/IEC 9074:1997 BS ISO/IEC 9074:1997. Information technology. Open systems interconnection. Estelle: a formal description technique based on an extended state transition model
BS ISO/IEC 10168-1:1997 BS ISO/IEC 10168-1:1997. Information technology. Open systems interconnection. Conformance test suite for the session protocol. Test suite structure and test purposes
BS ISO/IEC 8613-9:1996 BS ISO/IEC 8613-9:1996. Information processing. Text and office systems. Office document architecture (ODA) and interchange format. Audio content architectures
BS ISO/IEC ISP 15121-1:1997 BS ISO/IEC ISP 15121-1:1997. Information technology. International standardized profile AOD1n. Interactive manipulation of ODA Documents. AOD11. DTAM/Read only
BS ISO/IEC ISP 15121-2:1997 BS ISO/IEC ISP 15121-2:1997. Information technology. International standardized profile AOD1n. Interactive manipulation of ODA Documents. AOD12. DTAM/Insert
BS ISO/IEC ISP 15121-3:1997 BS ISO/IEC ISP 15121-3:1997. Information technology. International standardized profile AOD1n. Interactive manipulation of ODA Documents. AOD13. DTAM/Manipulation
BS EN 1081:1998 BS EN 1081:1998. Resilient floor coverings. Determination of the electrical resistance
BS EN 1070:1998 BS EN 1070:1998. Safety of machinery. Terminology
BS EN 1679-1:1998 BS EN 1679-1:1998. Reciprocating internal combustion engines. Safety. Compression ignition engines
BS ISO 13752:1998 BS ISO 13752:1998. Air quality. Assessment of uncertainty of a measurement method under field conditions using a second method as reference
BS ISO 5782-1:1997 BS ISO 5782-1:1997. Pnuematic fluid power. Compressed air filters. Main characteristics to be included in supplier's literature and product-marking requirements
BS ISO 5782-2:1997 BS ISO 5782-2:1997. Pnuematic fluid power. Compressed air filters. Test methods to determine the main characteristics to be included in supplier's literature
BS EN 1797-1:1998 BS EN 1797-1:1998. Cryogenic vessels. Gas/material compatibility. Oxygen compatibility
BS EN 50083-6:1998 BS EN 50083-6:1998. Cabled distribution systems for television and sound signals. Optical equipment
BS EN 160201:1998 BS EN 160201:1998. Harmonized system of quality assessment for electronic components. Blank detail specification. Microwave modular electronic units of assessed quality. Capability a
BS EN 50248:1998 BS EN 50248:1998. Characteristics of DAB receivers
BS EN 12468:1998 BS EN 12468:1998. Biotechnology. Modified organisms for application in the environment. Guidance for the monitoring strategies for deliberate releases of genetically modified plants
DD ENV 342:1998 DD ENV 342:1998. Protective clothing. Ensembles for protection against cold
DD ENV 343:1998 DD ENV 343:1998. Protective clothing. Protection against foul weather
98/120189DC 98/120189DC. BS 6782:Part 16. Binders for paints. Storage stability (ISO/CD 15716)
98/120559DC 98/120559DC. prEN 13122. Hot gas welding of semifinished products of thermoplastic materials
98/260317DC 98/260317DC. IEC 61000-4-2. Definition of accessible parts under normal operating conditions (IEC SC77B/231/CD). Testing and measurement techniques. Electrostatic discharges. Immunity test
BS EN 10223-4:1998 BS EN 10223-4:1998. Steel wire and wire products for fences. Steel wire welded mesh fencing
BS EN 10223-5:1998 BS EN 10223-5:1998. Steel wire and wire products for fences. Steel wire woven hinged joint and knotted mesh fencing
BS EN 10223-6:1998 BS EN 10223-6:1998. Steel wire and wire products for fences. Steel wire chain link fencing
BS EN 1977:1998 BS EN 1977:1998. Copper and copper alloys. Copper drawing stock (wire rod)
BS EN 1976:1998 BS EN 1976:1998. Copper and copper alloys. Cast unwrought copper products
BS EN 1978:1998 BS EN 1978:1998. Copper and copper alloys. Copper cathodes
BS EN 474-7:1998 BS EN 474-7:1998. Earth-moving machinery. Safety. Requirements for scrapers
BS EN 474-8:1998 BS EN 474-8:1998. Earth-moving machinery. Safety. Requirements for graders
BS EN 474-9:1998 BS EN 474-9:1998. Earth-moving machinery. Safety. Requirements for pipelayers
BS EN 474-10:1998 BS EN 474-10:1998. Earth-moving machinery. Safety. Requirements for trenchers
BS EN 474-11:1998 BS EN 474-11:1998. Earth-moving machinery. Safety. Requirements for earth and landfill compactors
BS 6911-14:1998, ISO 10265:1998 BS 6911-14:1998, ISO 10265:1998. Testing earth-moving machinery. Crawler machines. Performance requirements and test procedures for braking systems
BS EN 12082:1998 BS EN 12082:1998. Railway applications. Axleboxes. Performance testing
BS EN 12081:1998 BS EN 12081:1998. Railway applications. Axleboxes. Lubricating greases
BS EN 12080:1998 BS EN 12080:1998. Railway applications. Axleboxes. Rolling bearings
BS 2000-433:1998, ISO 14597:1997 BS 2000-433:1998, ISO 14597:1997. Methods of test for petroleum and its products. Petroleum products. Determination of vanadium and nickel content. Wavelength-dispersi
BS 2000-431:1998, ISO 7537:1997 BS 2000-431:1998, ISO 7537:1997. Methods of test for petroleum and its products. Petroleum products. Determination of acid number. Semi-micro colour-indicator titration
BS 2000:Part 432:1998, ISO 8973:1997 BS 2000:Part 432:1998, ISO 8973:1997. Methods of test for petroleum and its products. Liquefied petroleum gases. Calculation method for density and vapour pressure
BS 2000-130:1998, ISO 3839:1996 BS 2000-130:1998, ISO 3839:1996. Methods of test for petroleum and its products. Petroleum products. Determination of bromine number of distillates and aliphatic olefin
BS 2000-16:1998, ISO 3013:1997 BS 2000-16:1998, ISO 3013:1997. Methods of test for petroleum and its products. Petroleum products. Determination of the freezing point of aviation fuels
BS 2000-2:1998, ISO 2977:1997 BS 2000-2:1998, ISO 2977:1997. Methods of test for petroleum and its products. Petroleum products and hydrocarbon solvents. Determination of aniline point and mixed anili
BS EN 1217:1998 BS EN 1217:1998. Materials and articles in contact with foodstuffs. Test methods for water absorption of ceramic articles
BS ISO/IEC TR 15504-4:1998 BS ISO/IEC TR 15504-4:1998. Information technology. Software process assessment. Guide to performing assessments
BS ISO/IEC TR 15504-6:1998 BS ISO/IEC TR 15504-6:1998. Information technology. Software process assessment. Guide to competency of assessors
BS ISO/IEC TR 15504-7:1998 BS ISO/IEC TR 15504-7:1998. Information technology. Software process assessment. Guide for use in process improvement
BS ISO/IEC TR 15504-8:1998 BS ISO/IEC TR 15504-8:1998. Information technology. Software process assessment. Guide for use in determining supplier process capability
BS ISO/IEC TR 15504-9:1998 BS ISO/IEC TR 15504-9:1998. Information technology. Software process assessment. Vocabulary
BS ISO/IEC 15504-1:1998 BS ISO/IEC 15504-1:1998. Information technology. Software process assessment. Concepts and introductory guide
BS ISO/IEC TR 15504-2:1998 BS ISO/IEC TR 15504-2:1998. Information technology. Software process assessment. A reference model for processes and process capability
BS ISO/IEC TR 15504-3:1998 BS ISO/IEC TR 15504-3:1998. Information technology. Software process assessment. Performing an assessment
BS EN ISO 11114-1:1998 BS EN ISO 11114-1:1998. Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents. Metallic materials
BS EN ISO 11114-3:1998 BS EN ISO 11114-3:1998. Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents. Autogenous ignition test in oxygen atmosphere
BS EN ISO 13341:1998 BS EN ISO 13341:1998. Transportable gas cylinders. Fitting of valves to gas cylinders
BS 6920-4:1997 BS 6920-4:1997. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Method of test
BS EN 12199:1998 BS EN 12199:1998. Resilient floor coverings. Specifications for homogeneous and heterogeneous relief rubber floor coverings
BS EN 1817:1998 BS EN 1817:1998. Resilient floor coverings. Specification for homogeneous and heterogeneous smooth rubber floor coverings
BS EN 1816:1998 BS EN 1816:1998. Resilient floor coverings. Specification for homogeneous and heterogeneous smooth rubber floor coverings with foam backing
BS EN ISO 12687:1998 BS EN ISO 12687:1998. Metallic coatings. Porosity tests. Humid sulfur (flowers of sulfur) test
BS IEC 60050(705):1995, IEC 60050-705:1995 BS IEC 60050(705):1995, IEC 60050-705:1995. International electrotechnical vocabulary. Radio wave propagation
98/101449DC 98/101449DC. Amendment No. 3 to BS 4987:Part 1:1993. Coated macadam for roads and other paved areas. Specification for constituent materials and for mixtures. Specification for constituent
98/101379DC 98/101379DC. Guide on the interpretation of petrographical examinations for alkali-silica reactivity
BS ISO/IEC ISP 11187-4:1996 BS ISO/IEC ISP 11187-4:1996. Information technology. International standardized profiles AVT1n, AVT2n. Virtual terminal basic class. Application profiles. AVT23. S-mode Pag
BS ISO/IEC 11186-2:1996 BS ISO/IEC 11186-2:1996. Information technology. International standardized profiles FVT3nn. Virtual terminal basic class. Register of attribute assignment type definitions. FV
BS ISO/IEC ISP 11189:1997 BS ISO/IEC ISP 11189:1997. Information technology. International standardized profile FD12. Directory data definitions. MHS use of the directory
BS EN 3676:1998 BS EN 3676:1998. Inserts, thin wall, self-locking. Design standard
BS EN 3298:1998 BS EN 3298:1998. Inserts, thin wall, self-locking. Installation and removal procedure
98/200612DC 98/200612DC. IEC 60691. 2nd edition. Thermal-links. Requirements and application guide. Revision of 7.1, 7.2, 10.1, 10.3 and 11.4 (IEC Document 32C/199/CD)
BS EN 3297:1998 BS EN 3297:1998. Inserts, thin wall, self-locking, MJ threads, in heat resisting nickel base alloy NI-P100HT (Inconel 718). Technical specification
BS EN 3237:1998 BS EN 3237:1998. Inserts, thin wall, self-locking, long, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated internal thread
BS EN 3236:1998 BS EN 3236:1998. Inserts, thin wall, self-locking, short, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated internal thread
BS EN 737-4:1998 BS EN 737-4:1998. Medical gas pipeline systems. Terminal units for anaesthetic gas scavenging systems
98/701317DC 98/701317DC. BS 4401. Methods of test for meat and meat products. Part 9. Measurement of pH. Reference method (ISO/DIS 2917)
98/200600DC 98/200600DC. Amendment 1 to IEC 60598-2-4. Luminaires. Part 2-4. Particular requirements for portable purpose luminaires (IEC 34D/497/CD). Particular requirements for general purpose lumin
98/200548DC 98/200548DC. IEC 60947-5-1:1997. To remove references to switching overvoltages (IEC Document 17B/890/CDV). Control circuit devices and switching elements. Electromechanical control circui
BS EN 1543:1998 BS EN 1543:1998. Products and systems for the protection and repair of concrete structures. Test methods. Determination of tensile strength development for polymers
BS EN 1504-1:1998 BS EN 1504-1:1998. Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. Definitions
BS EN ISO 9241-7:1998 BS EN ISO 9241-7:1998. Ergonomic requirements for office work with visual display terminals (VDTs). Requirements for display with reflections
BS IEC 61334-1-2:1997, IEC 61334-1-2:1997 BS IEC 61334-1-2:1997, IEC 61334-1-2:1997. Distribution automation using distribution line carrier systems. General considerations. Guide for specification
BS EN 60870-5-103:1998, IEC 60870-5-103:1997 BS EN 60870-5-103:1998, IEC 60870-5-103:1997. Telecontrol equipment and systems. Transmission protocols. Companion standard for the informative interface o
BS ISO 11948-2:1998 BS ISO 11948-2:1998. Urine-absorbing aids. Determination of short-time liquid release (leakage) under conditions of light incontinence and low pressure
DD ENV 1805-1:1998 DD ENV 1805-1:1998. Data communication for HVAC Application Management Net. Building automation and control networking (BACnet)
BS EN 60243-1:1998, IEC 60243-1:1998 BS EN 60243-1:1998, IEC 60243-1:1998. Methods of test for electric strength of solid insulating materials. Tests at power frequencies
BS 7825-3.4:1998 BS 7825-3.4:1998. Calibration of rubber and plastics test equipment. Calibration schedules. Mechanical properties of rubber
BS 7825-3.7:1998 BS 7825-3.7:1998. Calibration of rubber and plastics test equipment. Calibration schedules. Rheological properties
DD 247:1998 DD 247:1998. Documentation. Vocabulary
BS EN 933-7:1998 BS EN 933-7:1998. Tests for geometrical properties of aggregates. Determination of shell content. Percentage of shells in coarse aggregates
BS IEC 61000-5-2:1997 BS IEC 61000-5-2:1997. Electromagnetic compatibility (EMC). Installation and mitigation guidelines. Earthing and cabling
BS IEC 61624:1997 BS IEC 61624:1997. Guidance on the development of lists of maximum allowable temperatures for polymeric compounds used in electrotechnical equipment
BS EN 61069-4:1998, IEC 61069-4:1997 BS EN 61069-4:1998, IEC 61069-4:1997. Industrial-process measurement and control. Evaluation of system properties for the purpose of system assessment. Assessment
DD ENV 12920:1998 DD ENV 12920:1998. Characterization of waste. Methodology for the determination of the leaching behaviour of waste under specified conditions
BS EN 1744-1:1998 BS EN 1744-1:1998. Tests for chemical properties of aggregates. Chemical analysis
BS 6068-5.0:1998, ISO/TR 15462:1997 BS 6068-5.0:1998, ISO/TR 15462:1997. Water quality. Biological methods. Selection of tests for biodegradability
BS 7755-5.3:1998, ISO 11508:1998 BS 7755-5.3:1998, ISO 11508:1998. Soil quality. Physical methods. Determination of particle density
98/200685DC 98/200685DC. IEC 60439-3:1990. Amendment No. 2. Low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access for their use. Dist
98/560776DC 98/560776DC. Water quality. Determination of genotoxicity of water and waste water using the UMU-test (ISO/DIS 13829)
98/645125DC 98/645125DC. ISO/IEC 15428. Information technology. Telecommunications and information exchange between systems. Private integrated services network. Specification, functional model and in
98/645124DC 98/645124DC. ISO/IEC 15429. Information technology. Telecommunications and information exchange between systems. PISN. Inter-exchange signalling protocol. Wireless terminal location regist
98/645123DC 98/645123DC. ISO/IEC 15430. Information technology. Telecommunications and information exchange between systems. PISN. Specification, functional model and information flows. Wireless termi
98/645122DC 98/645122DC. ISO/IEC 15431. Information technology. Telecommunications and information exchange between systems. PISN. Inter-exchange signalling protocol. Wireless terminal call handling a
98/645121DC 98/645121DC. ISO/IEC 15432. Information technology. Telecommunications and information exchange between systems. PISN. Specification, functional model and information flows. Wireless termi
98/645120DC 98/645120DC. ISO/IEC 15433. Information technology. Telecommunications and information exchange between systems. PISN. Inter-exchange signalling protocol. Wireless terminal authentication
98/704627DC 98/704627DC. ISO/CD 13216-1. Road vehicles. Child restraint systems. Anchorages in vehicles and attachments to anchorages. Part 1. Seat bight anchorages and attachments. Seat bight anchora
BS EN ISO 3274:1998 BS EN ISO 3274:1998. Geometric product specifications (GPS). Surface texture. Profile method. Nominal characteristics of contact (stylus) instruments
BS ISO 10791-7:1998 BS ISO 10791-7:1998. Test conditions for machining centres. Accuracy of a finished test piece
BS ISO 10791-5:1998 BS ISO 10791-5:1998. Test conditions for machining centres. Accuracy and repeatability of positioning of work-holding pallets
BS EN 1367-4:1998 BS EN 1367-4:1998. Tests for thermal and weathering properties of aggregates. Determination of drying shrinkage
BS EN 1367-2:1998 BS EN 1367-2:1998. Tests for thermal and weathering properties of aggregates. Magnesium sulfate test
BS EN 160200-1:1998 BS EN 160200-1:1998. Harmonized system of quality assessment for electronic components. Sectional specification. Microwave modular electronic units of assessed quality. Capability
BS 7533-4:1998 BS 7533-4:1998. Pavements constructed with clay, natural stone or concrete pavers. Code of practice for the construction of pavements of precast concrete flags or natural stone slabs
BS EN 10228-2:1998 BS EN 10228-2:1998. Non-destructive testing of steel forgings. Penetrant testing
BS EN 10229:1998 BS EN 10229:1998. Evaluation of resistance of steel products to hydrogen induced cracking (HIC)
BS 6767-2:1998 BS 6767-2:1998. Transportable accommodation units. Recommendations for design and installation of services and fittings with guidance on transportation, siting and aspects relating to h
EP 200 EP 200. BSI Electronic Book. Quality Management Systems
EP 201:1998 EP 201:1998. BSI Electronic Book. Information Security Management
EP 203:2000 EP 203:2000. BSI Electronic Book. Project Management
BS EN 10111:1998 BS EN 10111:1998. Continuously hot-rolled low carbon steel sheet and strip for cold forming. Technical delivery conditions
BS EN 1041:1998 BS EN 1041:1998. Information supplied by the manufacturer with medical devices
BS EN ISO 389-7:1998 BS EN ISO 389-7:1998. Acoustics. Reference zero for the calibration of audiometric equipment. Reference threshold of hearing under free-field and diffuse-field listening condition
BS ISO 6155:1998 BS ISO 6155:1998. Machine tools. Test conditions for horizontal spindle turret and single spindle automatic lathes. Testing of the accuracy
BS ISO 2407:1997 BS ISO 2407:1997. Test conditions for internal cylindrical grinding machines with horizontal spindle. Testing of accuracy
BS ISO 11090-1:1998 BS ISO 11090-1:1998. Machine tools. Test conditions for die sinking electrodischarge machines (EDM). Terminology and testing of accuracy. Single column machines (cross slide table
BS EN 61270-1:1998, IEC 61270-1:1996 BS EN 61270-1:1998, IEC 61270-1:1996. Capacitors for microwave ovens. General
BS EN 10107:1996 BS EN 10107:1996. Grain-oriented electrical steel sheet and strip delivered in the fully processed state
BS EN 10028-5:1997 BS EN 10028-5:1997. Specification for flat products made of steels for pressure purposes. Weldable fine grain steels, thermomechanically rolled
BS IEC 60695-2-20:1995 BS IEC 60695-2-20:1995. Fire hazard testing. Glowing/Hot wire based test methods. Hot-wire coil ignitability test on materials
BS IEC 61000-2-7:1998 BS IEC 61000-2-7:1998. Electromagnetic compatibility (EMC). Environment. Low frequency magnetic fields in various environments
BS G 262:1998, ISO/TR 224:1998 BS G 262:1998, ISO/TR 224:1998. Aircraft. Declaration of design and performance for aircraft equipment. Standard form
BS ISO TR 11552:1997 BS ISO TR 11552:1997. Lasers and laser-related equipment. Laser materials-processing machines. Performance specifications and benchmarks for cutting of metals
BS 7825-3.8:1998 BS 7825-3.8:1998. Calibration of rubber and plastics test equipment. Calibration schedules. Degradation and environmental properties
BS 7825-3.10:1998 BS 7825-3.10:1998. Calibration of rubber and plastics test equipment. Calibration schedules. Conditioning, sample and test piece preparation
BS QC 221200:1997, IEC 60169-8:1978 BS QC 221200:1997, IEC 60169-8:1978. Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock. C
BS EN 134:1998 BS EN 134:1998. Respiratory protective devices. Nomenclature of components
BS ISO 5348:1998 BS ISO 5348:1998. Mechanical vibration and shock. Mechanical mounting of accelerometers
98/101750DC 98/101750DC. BS EN 12697-32. Bituminous mixtures. Test methods for hot mix asphalt. Part 32. Laboratory compaction of bituminous mixtures by a vibratory compactor (prEN 12697-32:1997). Par
98/200790DC 98/200790DC. IEC 60335-2-90. Ed 1. Safety of household and similar electrical appliances. Part 2-90. Particular requirements for commercial microwave ovens, subclause 11.8
98/704534DC 98/704534DC. Aerospace series. Spring tension clips of electrical wiring, in alloy steel (X12CrNi18-10) (prEN 4420)
BS 3986-2:1998 BS 3986-2:1998. Methods of test for drying performance of agricultural grain dryers. Additional procedures and crop specific requirements
BS 7797:1998 BS 7797:1998. Specification for industrial duct heaters using metal-sheathed elements
BS 7798:1998 BS 7798:1998. Specification for industrial immersion heaters using metal-sheathed elements
WD/HB10145-BUSINESS GUIDE TO YEAR 2000 WD/HB10145-BUSINESS GUIDE TO YEAR 2000. A Business Guide to the Year 2000
BS ISO/IEC 14755:1997 BS ISO/IEC 14755:1997. Information technology. Input methods to enter characters from the repertoire of ISO/IEC 10646 with a keyboard or other input device
BS ISO/IEC 10744:1997 BS ISO/IEC 10744:1997. Information technology. Hypermedia/time-based structuring language (HyTime)
BS ISO/IEC ISP 11186-4:1997 BS ISO/IEC ISP 11186-4:1997. Information technology. International standardized profiles FVT3nn. Virtual terminal basic class. Register of attribute assignment type definit
BS EN ISO 8253-3:1998 BS EN ISO 8253-3:1998. Acoustics. Audiometric test methods. Speech audiometry
BS EN 1733:1998 BS EN 1733:1998. Suction catheters for use in the respiratory tract
BS EN ISO 8253-1:1998 BS EN ISO 8253-1:1998. Acoustics. Audiometric test methods. Basic pure tone air and bone conduction threshold audiometry
BS EN 60130-9:1997, IEC 60130-9:1989 BS EN 60130-9:1997, IEC 60130-9:1989. Connectors for frequencies below 3 MHz. Circular connectors for radio and associated sound equipment
BS 144:1997 BS 144:1997. Specification for coal tar creosote for wood preservation
BS ISO 6301-1:1997 BS ISO 6301-1:1997. Pneumatic fluid power. Compressed air lubricators. Main characteristics to be included in supplier's literature and product-marking requirements
BS EN ISO 3386-2:1998 BS EN ISO 3386-2:1998. Polymeric materials, cellular flexible. Determination of stress-strain characteristic in compression. High-density materials
BS EN ISO 4583:1998, BS 2782-4:Method 433B:1998 BS EN ISO 4583:1998, BS 2782-4:Method 433B:1998. Plastics. Epoxy resins and related materials. Determination of easily saponifiable chlorine
BS ISO 1625:1998 BS ISO 1625:1998. Plastics. Polymer dispersions. Determination of non-volatile matter (residue) at specified temperatures
98/120224DC 98/120224DC. prEN 13131. Liquid petroleum products. Determination of nickel and vandium content. Atomic absorption spectrometric method
98/120867DC 98/120867DC. BS 903. Physical testing of rubber. Part A66. Estimation of thermal endurance. Estimation of thermal endurance
98/200844DC 98/200844DC. Amendment 2 to IEC 60598-2-23. Luminaires. Part 2.23. Particular requirements for extra-low voltage systems for filament lamps [IEC Document 34D/498/CD). Particular requiremen
98/200860DC 98/200860DC. IEC 60335-2-23, Ed. 4. Safety of household and similar electrical appliances. Part 2.23. Particular requirements for appliances for skin or hair care, subclauses 19.101 and 30
98/200861DC 98/200861DC. IEC 60335-2-59, Ed 2. Safety of household and similar electrical appliances. Part 2.29. Particular requirements for appliances for insect killers, subclauses 22.101 (61/1420/C
98/200862DC 98/200862DC. IEC 60335-2-6, Ed 1. Safety of household and similar electrical appliances. Part 2.65. Particular requirements for air-cleaning appliances, subclauses 24.101 (61/1421/CD). Par
98/201007DC 98/201007DC. IEC 61386. Conduit systems for electrical installations. Part 21. Particular requirements. Rigid conduit systems (IEC Document 23A/297/CD. Particular requirement - Rigid condu
98/201008DC 98/201008DC. Conduit systems for electrical installations. Part 22. Particular requirement. Pliable conduit systems (IEC Document 23A/298/CD).Particular requirements - Pliable conduit syst
98/201009DC 98/201009DC. Conduits systems for electrical installations. Part 23. Particular requirements. Flexible conduit systems (IEC Document 23A/299/CD). Particular requirements - Flexible conduit
98/230486DC 98/230486DC. IEC 60191-4. Mechanical standardization of semiconductor devices. Part 4. Coding system and classification into forms of package outlines for semiconductor device packages [IE
98/704089DC 98/704089DC. Guide for the verification of a pump casing design procedure
BS 2486:1997 BS 2486:1997. Recommendations for treatment of water for steam boilers and water heaters
BS ISO 4433-4:1997, BS 2782-11:Method 1161D:1998 BS ISO 4433-4:1997, BS 2782-11:Method 1161D:1998. Thermoplastics pipes. Resistance to liquid chemicals. Classification. Poly(vinylidene fluoride) (PVDF
BS EN 1886:1998 BS EN 1886:1998. Ventilation for buildings. Air handling units. Mechanical performance
BS 4102:1998 BS 4102:1998. Specification for steel wire for general fencing purposes
BS EN 61362:1998 BS EN 61362:1998. Guide to specification of hydroturbine control systems
BS ISO TR 10828:1997 BS ISO TR 10828:1997. Worm gears. Geometry of worm profiles
BS ISO TR 10495:1997 BS ISO TR 10495:1997. Cylindrical gears. Calculation of service life under variable load. Conditions for cylindrical gears in accordance with ISO 6336
BS ISO TR 15069:1997 BS ISO TR 15069:1997. Series 1 freight containers. Handling and securing. Rationale for ISO 3874 annex A
BS ISO/TR 9494:1997, ISO/TR 9494:1997 BS ISO/TR 9494:1997, ISO/TR 9494:1997. Petroleum liquids. Automatic pipeline sampling. Statistical assessment of performance of automatic samplers determining the
BS EN ISO 11688-1:1998 BS EN ISO 11688-1:1998. Acoustics. Recommended practice for the design of low-noise machinery and equipment. Planning
BS EN ISO 11690-3:1999 BS EN ISO 11690-3:1999. Acoustics. Recommended practice for the design of low-noise workplaces containing machinery. Sound propagation and noise prediction in workrooms
PD 6615:1998 PD 6615:1998. Guide to setting up a parts database
98/560921DC 98/560921DC. BS 7755. Soil quality. Part 3. Chemical methods. New section. Determination of total trace element content. Digestion with hydrofluoric and perchloric acids (ISO/DIS 14869-1).
98/260748DC 98/260748DC. CISPR 14-2 (1997). Clause 1.1. Add 'similar radiators' (CISPR/F/245/CD). Immunity - Product family standard
98/121312DC 98/121312DC. BS ISO 13936-2. Textiles. Determination of the slippage resistance of yarns at a seam in woven fabrics. Part 2. Fixed load method. Part 2: Fixed load method
98/121311DC 98/121311DC. BS ISO 13936-1. Textiles. Determination of the slippage resistance of yarns at a seam in woven fabrics. Part 1. Fixed opening method. Part 1: Fixed opening method
BS EN 1891:1998 BS EN 1891:1998. Personal protective equipment for the prevention of falls from a height. Low stretch kernmantel ropes
BS EN ISO 8985:1998 BS EN ISO 8985:1998. Plastics. Ethylene/vinyl acetate copolymer (EVAC) thermoplastics. Determination of vinyl acetate content
BS EN 1846-1:1998 BS EN 1846-1:1998. Firefighting and rescue service vehicles. Nomenclature and designation
BS EN 1822-3:1998 BS EN 1822-3:1998. High efficiency air filters (HEPA and ULPA). Testing flat sheet filter media
BS EN 1822-2:1998 BS EN 1822-2:1998. High efficiency air filters (HEPA and ULPA). Aerosol production, measuring equipment, particle counting statistics
BS EN 1822-1:1998 BS EN 1822-1:1998. High efficiency air filters (HEPA and ULPA). Classification, performance testing, marking
BS EN 12094-8:1998 BS EN 12094-8:1998. Fixed firefighting systems. Components for gas extinguishing systems. Requirements and test methods for flexible connectors for CO2 systems
BS 4368-1:1998 BS 4368-1:1998. Metallic tube connectors for fluid power and general use. Split collet compression fittings
98/120951DC 98/120951DC. prEN 13207. Silage thermoplastic films
BS ISO/IEC 9579-2:1998 BS ISO/IEC 9579-2:1998. Information technology. Open systems interconnection. Remote database access. SQL Specialization
PD 6622:1998, CR 10260:1998 PD 6622:1998, CR 10260:1998. Designation systems for steel. Additional symbols
BS EN 60079-14:1997, IEC 60079-14:1996 BS EN 60079-14:1997, IEC 60079-14:1996. Electrical apparatus for explosive gas atmospheres. Electrical installations in hazardous areas (other than mines)
BS EN 331:1998 BS EN 331:1998. Manually operated ball valves and closed bottom taper plug valves for gas installations in buildings
98/201135DC 98/201135DC. IEC 60034-7:1992. Rotating electrical machinery. Part 7. Classification of types of construction and mounting arrangements (IM code) (IEC document 2/1009/CD). Classification o
BS ISO 13344:1996 BS ISO 13344:1996. Determination of the lethal toxic potency of fire effluents
98/201211DC 98/201211DC. EN 60570. Electrical supply track systems for luminaires
98/260820DC 98/260820DC. A2 amendment to EN 50014:1997. Electrical apparatus for potentially explosive atmospheres. General requirements
98/121223DC 98/121223DC. BS ISO 10086-1. Coal. Methods for evaluating flocculants for use in coal preparation. Part 1. Basic parameters
98/705265DC 98/705265DC. Aerospace series. Nickel-cadmium batteries. Technical specification
BS EN 12460:1998 BS EN 12460:1998. Biotechnology. Large-scale process and production. Guidance on equipment selection and installation in accordance with the biological risk
BS EN 12461:1998 BS EN 12461:1998. Biotechnology. Large-scale process and production. Guidance for the handling, inactivating and testing of waste
BS 7012-10.1:1998, ISO 11884-1:1998 BS 7012-10.1:1998, ISO 11884-1:1998. Light microscopes. Minimum requirements for stereo microscopes. Stereo microscopes for general use
BS EN 10257-2:1998 BS EN 10257-2:1998. Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables. Submarine cables
BS ISO 14269-1:1997 BS ISO 14269-1:1997. Tractors and self-propelled machines for agriculture and forestry. Operator enclosure environment. Vocabulary
BS ISO 14269-2:1997 BS ISO 14269-2:1997. Tractors and self-propelled machines for agriculture and forestry. Operator enclosure environment. Heating, ventilating and air-conditioning test method and pe
BS ISO 14269-3:1997 BS ISO 14269-3:1997. Tractors and self-propelled machines for agriculture and forestry. Operator enclosure environment. Determination of effect of solar heating
BS ISO 14269-4:1997 BS ISO 14269-4:1997. Tractors and self-propelled machines for agriculture and forestry. Operator enclosure environment. Air filter element test method
BS ISO 14269-5:1997 BS ISO 14269-5:1997. Tractors and self-propelled machines for agriculture and forestry. Operator enclosure environment. Pressurization system test method
BS 4551-2:1998 BS 4551-2:1998. Methods of testing mortars, screeds and plasters. Chemical analysis and aggregate grading
BS EN ISO 1158:1998 BS EN ISO 1158:1998. Plastics. Vinyl chloride homopolymers and copolymers. Determination of chlorine content
BS EN 50136-1-4:1998 BS EN 50136-1-4:1998. Alarm systems. Alarm transmission systems and equipment. Requirements for systems with voice communicators using the public switched telephone network
BS EN 50136-2-2:1998 BS EN 50136-2-2:1998. Alarm systems. Alarm transmission systems and equipment. Requirements for equipment used in systems using dedicated alarm paths
BS EN 50136-2-3:1998 BS EN 50136-2-3:1998. Alarm systems. Alarm transmission systems and equipment. Requirements for equipment used in systems with digital communicators using the public switched tele
BS EN 50136-2-4:1998 BS EN 50136-2-4:1998. Alarm systems. Alarm transmission systems and equipment. Requirements for equipment used in systems with voice communicators using the public switched teleph
BS EN 50136-1-3:1998 BS EN 50136-1-3:1998. Alarm systems. Alarm transmission systems and equipment. Requirements for systems with digital communicators using the public switched telephone network
BS EN 50136-1-2:1998 BS EN 50136-1-2:1998. Alarm systems. Alarm transmission systems and equipment. Requirements for systems using dedicated alarm paths
BS EN ISO 4608:1998, BS 2782-4:Method 454E:1998 BS EN ISO 4608:1998, BS 2782-4:Method 454E:1998. Plastics. Homopolymer and copolymer resins of vinyl chloride for general use. Determination of plastici
BS EN 993-14:1998, BS 1902-5.6:1998 BS EN 993-14:1998, BS 1902-5.6:1998. Methods of test for dense shaped refractory products. Determination of thermal conductivity by the hot-wire (cross-array) metho
BS EN 993-15:1998 BS EN 993-15:1998. Methods of test for dense shaped refractory products. Determination of thermal conductivity by the hot-wire (parallel) method
BS ISO 6264:1998 BS ISO 6264:1998. Hydraulic fluid power. Pressure-relief valves. Mounting surfaces
DD ENV 13070:1998 DD ENV 13070:1998. Fruit and vegetable juices. Determination of the stable carbon isotope ratio (13C/12C) in the pulp of fruit juices. Method using isotope ratio mass spectrometry
BS EN ISO 12867:1998 BS EN ISO 12867:1998. Ophthalmic instruments. Trial frames
BS EN ISO 12865:1998 BS EN ISO 12865:1998. Ophthalmic instruments. Retinoscopes
BS ISO 6301-2:1997 BS ISO 6301-2:1997. Pneumatic fluid power. Compressed air lubricators. Test methods to determine the main characteristics to be included in supplier's literature
BS EN ISO 659:1999, BS 4289-4:1999 BS EN ISO 659:1999, BS 4289-4:1999. Oilseeds. Determination of oil content (Reference method)
BS EN 12131:1998 BS EN 12131:1998. Feather and down. Test methods. Determination of the quantitive composition of feather and down (manual method)
BS EN 1974:1998 BS EN 1974:1998. Food processing machinery. Slicing machines. Safety and hygiene requirements
BS EN 1678:1998 BS EN 1678:1998. Food processing machinery. Vegetable cutting machines. Safety and hygiene requirements
BS EN 45510-8-1:1998 BS EN 45510-8-1:1998. Guide for the procurement of power station equipment. Control and instrumentation
BS ISO 8622:1998 BS ISO 8622:1998. Cinematography. Magnetic sound records on 70 mm motion-picture release prints with magnetic stripes. A-chain reproduction characteristics
BS EN 60534-2-3:1998, IEC 60534-2-3:1997 BS EN 60534-2-3:1998, IEC 60534-2-3:1997. Industrial-process control valves. Flow capacity. Test procedures
BS CECC 23800-801:1998 BS CECC 23800-801:1998. Harmonized system of quality assessment for electronic components. Capability detail specification: flexible multilayer printed boards with through conne
BS CECC 23600-801:1998 BS CECC 23600-801:1998. Harmonized system of quality assessment for electronic components. Capability detail specification: flex-rigid multilayer printed boards with through con
BS CECC 23300-801:1998 BS CECC 23300-801:1998. Harmonized system of quality assessment for electronic components. Capability detail specification: multi-layer printed boards
BS CECC 23200-801:1998 BS CECC 23200-801:1998. Harmonized system of quality assessment for electronic components. Capability detail specification: single and double-sided printed boards with plated th
BS CECC 23100-801:1998 BS CECC 23100-801:1998. Harmonized system of quality assessment for electronic components. Capability detail specification: single and double-sided printed boards with plain hol
BS CECC 23700-801:1998 BS CECC 23700-801:1998. Harmonized system of quality assessment for electronic components. Capability detail specification: flex-rigid double-sided printed boards with through c
BS 6840-13:1998, IEC 60268-13:1998 BS 6840-13:1998, IEC 60268-13:1998. Sound system equipment. Listening tests on loudspeakers
BS ISO/IEC TR 13818-5:1997 BS ISO/IEC TR 13818-5:1997. Information technology. Generic coding of moving pictures and associated audio information. Software simulation
BS IEC 61292-1:1998 BS IEC 61292-1:1998. Fibre optics. Parameters of amplifier components
BS EN 61298-3:1998, IEC 61298-3:1998 BS EN 61298-3:1998, IEC 61298-3:1998. Process measurement and control devices. General methods and procedures for evaluating performance. Tests for the effects of
BS EN ISO 10938:1998 BS EN ISO 10938:1998. Ophthalmic instruments. Chart projectors
BS EN ISO 10940:1998 BS EN ISO 10940:1998. Ophthalmic instruments. Fundus cameras
BS EN ISO 10939:1998 BS EN ISO 10939:1998. Ophthalmic instruments. Slit-lamp microscopes
BS EN ISO 10943:1998 BS EN ISO 10943:1998. Ophthalmic instruments. Indirect ophthalmoscopes
BS EN ISO 10944:1998 BS EN ISO 10944:1998. Ophthalmic optics. Synoptophores
BS IEC 61366-2:1998 BS IEC 61366-2:1998. Hydraulic turbines, storage pumps, and pump turbines. Tendering documents. Guidelines for technical specifications for Francis turbines
98/121085DC 98/121085DC. Code of practice for selection, installation and maintenance of entrance flooring systems
98/560722DC 98/560722DC. Amendment No. 1. Sterile, single-use syringes, with or without needle, for insulin (ISO 8537:1992/DAM 1)
BS A 323:1998, ISO 4095:1998 BS A 323:1998, ISO 4095:1998. Bihexagonal drives. Wrenching configuration. Metric series
BS A 324:1998, ISO 9199:1998 BS A 324:1998, ISO 9199:1998. Nuts, bihexagonal, self-locking, MJ threads, classifications: 1100 MPa (at ambient temperature)/425°C, 1100 MPa (at ambient temperature)/650°
BS EN 898:1998 BS EN 898:1998. Chemicals used for treatment of water intended for human consumption. Sodium hydrogen carbonate
BS ISO 4414:1998 BS ISO 4414:1998. Pneumatic fluid power. General rules relating to systems
BS ISO 4413:1998 BS ISO 4413:1998. Hydraulic fluid power. General rules relating to systems
BS ISO 10770-2:1998 BS ISO 10770-2:1998. Hydraulic fluid power. Electrically modulated hydraulic control valves. Test methods for three-way directional flow control valves
BS ISO 10770-1:1998 BS ISO 10770-1:1998. Hydraulic fluid power. Electrically modulated hydraulic control valves. Test methods for four-way directional flow control valves
BS EN 1195:1998 BS EN 1195:1998. Timber structures. Test methods. Performance of structural floor decking
BS EN 60335-2-29:1997 BS EN 60335-2-29:1997. Specification for safety of household and similar electrical appliances. Particular requirements. Battery chargers
BS EN 50199:1996 BS EN 50199:1996. Electromagnetic compatibility (EMC). Product standard for arc welding equipment
BS EN 60335-2-43:1997, IEC 60335-2-43:1995 BS EN 60335-2-43:1997, IEC 60335-2-43:1995. Specification for safety of household and similar electrical appliances. Particular requirements. Clothes dryers
BS EN 60400:1996 BS EN 60400:1996. Specification for lampholders for tubular fluorescent lamps and starterholders
BS 7916:1998 BS 7916:1998. Code of practice for the selection and application of particleboard, oriented strand board (OSB), cement bonded particleboard and wood fibreboards for specific purposes
98/561058DC 98/561058DC. Implants for surgery. Copolymers and blends based on polylactide. In vitro degradation testing (ISO/DIS 15814)
98/121065DC 98/121065DC. Injection-moulded unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C), acrylonitrile-butadiene-styrene (ABS) and acrylonitrile-butadiene-acryl
BS EN 1556:1998 BS EN 1556:1998. Bar coding. Terminology
BS EN 12403:1998 BS EN 12403:1998. Bar coding. Structured data files
DD ENV 13066:1998 DD ENV 13066:1998. Bar coding. Test specifications for bar code production software
DD ENV 13065:1998 DD ENV 13065:1998. Bar coding. Test specifications for bar code masters
BS EN 60674-3-1:1998, IEC 60674-3-1:1998 BS EN 60674-3-1:1998, IEC 60674-3-1:1998. Specification for plastic films for electrical purposes. Specifications for individual materials. Biaxially oriented
BS EN 61061-1:1998, IEC 61061-1:1998 BS EN 61061-1:1998, IEC 61061-1:1998. Non-impregnated densified laminated wood for electrical purposes. Definitions, designations and general requirements
BS EN ISO 12241:1998 BS EN ISO 12241:1998. Thermal insulation for building equipment and industrial installations. Calculation rules
DD ENV 12497:1998 DD ENV 12497:1998. Paper and board. Paper and board intended to come into contact with foodstuffs. Determination of mercury in an aqueous extract
98/705770DC 98/705770DC. Hydraulic fluid power. Cleanliness of components. Inspection document and methods of sample collection, sample analysis, and data reporting (ISO/CD 10949)