BIS Standards Catalogue
PD ISO/IEC TR 18047-2:2006 PD ISO/IEC TR 18047-2:2006. Information technology. Radio frequency identification device conformance test methods. Test methods for air interface communication below 135 kH
BS EN 15282:2007 BS EN 15282:2007. Vitreous and porcelain enamels. Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges
BS EN 15284:2007 BS EN 15284:2007. Materials and articles in contact with food stuffs. Test method for the resistance to microwave heating of ceramic, glass, glass-ceramic or plastic cookware
PD IEC/TR 62240:2005 PD IEC/TR 62240:2005. Process management for avionics. Use of semiconductor devices outside manufacturers' specified temperature range
05/30136071 DC 05/30136071 DC. ISO 13253. Ducted air-conditioners and air-to-air heat pumps. Testing and rating for performance
05/30136084 DC 05/30136084 DC. ISO 12575-3. Thermal insulation. Exterior insulating systems for foundations. Part 3. Test methods
ISO6597 : 2005 EDTN4 ISO6597 : 2005 EDTN4. ISO6597 : 2005 Road vehicles - Hydraulic braking systems, including those with electronic control functions, for motor vehicles - Test procedures
05/30136105 DC 05/30136105 DC. ISO 15042. Multiple split-system air-conditioners and air-to-air heat pumps. Testing and rating for performance
BS EN 14359:2006 BS EN 14359:2006. Gas-loaded accumulators for fluid power applications
PD CEN/TR 15281:2006 PD CEN/TR 15281:2006. Guidance on inerting for the prevention of explosions
05/30136149 DC 05/30136149 DC. IEC 62116. Testing procedure of islanding prevention measures for utility interactive photovoltaic inverters
BS EN 60426:2007 BS EN 60426:2007. Electrical insulating materials. Determination of electrolytic corrosion caused by insuating materials. Test methods
BS EN 10294-1:2005 BS EN 10294-1:2005. Hollow bars for machining. Technical delivery conditions. Non alloy and alloy steels
BS EN 13234:2006 BS EN 13234:2006. Advanced technical ceramics. Mechanical properties of ceramic composites at ambient temperature. Evaluation of the resistance to crack propagation by notch sensitivi
BS EN 13368-2:2007 BS EN 13368-2:2007. Fertilizers. Determination of chelating agents in fertilizers by chromatography. Determination of Fe chelated by o,o-EDDHA and o,o-EDDHMA by ion pair chromatogra
BS EN 1482-1:2007 BS EN 1482-1:2007. Fertilizers and liming materials. Sampling and sample preparation. Sampling
BS EN 1482-2:2007 BS EN 1482-2:2007. Fertilizers and liming materials. Sampling and sample preparation. Sample preparation
05/30136183 DC 05/30136183 DC. IEC 60404-8-7. Magnetic materials. Part 8-7. Specification of individual materials. Cold-rolled grain-oriented electrical steel sheet and strip delivered in the fully-pr
BS EN 13235:2006 BS EN 13235:2006. Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of creep behaviour
DD CLC/TS 61970-2:2005 DD CLC/TS 61970-2:2005. Energy management system application program interface (EMS-API). Glossary
DD CEN/TS 15280:2006 DD CEN/TS 15280:2006. Evaluation of a.c. corrosion likelihood of buried pipelines. Application to cathodically protected pipelines
BS ISO 132:2005 BS ISO 132:2005. Rubber, vulcanized or thermoplastic. Determination of flex cracking and crack growth (De Mattia)
BS EN 2084:2005 BS EN 2084:2005. Aerospace series. Cables, electric, single-core, general purpose, with conductors in copper or copper alloy. Technical specification
06/30136260 DC 06/30136260 DC. ISO 21138-1. Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinylchloride) (PVC-U), pol
06/30136263 DC 06/30136263 DC. ISO 21138-2. Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinylchloride) (PVC-U), pol
06/30136266 DC 06/30136266 DC. ISO 21138-3. Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinylchloride) (PVC-U), pol
CWA 14729-1:2005 CWA 14729-1:2005. The Intrastat system. The implementation model
CWA 14729-2:2005 CWA 14729-2:2005. The Intrastat system. Message implementation guideline of INSTAT/XML
CWA 14729-3:2005 CWA 14729-3:2005. The Intrastat system. Message implementation guideline of INSRES/XML
BS ISO 11486:2006 BS ISO 11486:2006. Motorcycles. Methods for setting the running resistance on a chassis dynamometer
BS ISO 11157:2005 BS ISO 11157:2005. Road vehicles. Brake lining assemblies. Inertia dynamometer test method
BS EN 61534-21:2006 BS EN 61534-21:2006. Powertrack systems. Particular requirements for powertrack systems intended for wall and ceiling mounting
05/30136307 DC 05/30136307 DC. ISO 1496-1 AMD 5. Freight containers. Specification and testing. Part 1. General cargo containers for general purposes
PD CEN ISO/TR 3834-6:2007 PD CEN ISO/TR 3834-6:2007. Quality requirements for fusion welding of metallic materials. Guidelines on implementing ISO 3834
BS ISO 11040-4:2007 BS ISO 11040-4:2007. Prefilled syringes . Glass barrels for injectables
BS EN 581-1:2006 BS EN 581-1:2006. Outdoor furniture. Seating and tables for camping, domestic and contract use. General safety requirements
BS ISO 14229:2006 BS ISO 14229:2006. Road vehicles. Unified diagnostic services (UDS). Specification and requirements
05/30136363 DC 05/30136363 DC. IEC 60255-6 ED 3. Electrical relays. Part 6. General requirements for measuring relays and protection equipment
BS ISO 1817:2005 BS ISO 1817:2005. Rubber, vulcanized. Determination of the effect of liquids
BS EN 12984:2005 BS EN 12984:2005. Food processing machinery. Portable and/or hand-guided machines and appliances with mechanically driven cutting tools. Safety and hygiene requirements
BS ISO 7635:2006 BS ISO 7635:2006. Road vehicles. Air and air/hydraulic braking systems of motor vehicles, including those with electronic control functions. Test procedures
06/30136412 DC 06/30136412 DC. ISO 21299. Powered ride-on turf care equipment. Roll-over protective structures (ROPS). Test procedures and acceptance criteria
BS ISO 16038:2005 BS ISO 16038:2005. Rubber condoms. Guidance on the use of ISO 4074 in the quality management of natural rubber latex condoms
DD CEN/TS13381-1:2005 DD CEN/TS13381-1:2005. Test methods for determining the contribution to the fire resistance of structural members. Horizontal protective membranes
PD CEN/TR 14709:2006 PD CEN/TR 14709:2006. Postal services. Quality of service. Guide for the implementation of EN 13850
BS ISO 17577:2006 BS ISO 17577:2006. Steel. Ultrasonic testing for steel flat products of thickness equal to or greater than 6 mm
PD ISO/TR 7620:2005 PD ISO/TR 7620:2005. Rubber materials. Chemical resistance
05/30136482 DC 05/30136482 DC. EN 12983-3. Cookware. Domestic cookware for use on top of a stove, cooker or hob. Part 3. Cookware for use on induction heating sources
BS EN 15307:2007 BS EN 15307:2007. Adhesives for leather and footwear materials. Sole-upper bonds. Minimum strength requirements
BS EN 15311:2007 BS EN 15311:2007. Thermal spraying. Components with thermally sprayed coatings. Technical supply conditions
05/30136503 DC 05/30136503 DC. prEN 14309. Thermal insulation products for building equipment and industrial installations. Factory made products of expanded polystyrene (EPS). Specification
05/30136516 DC 05/30136516 DC. prEN 14308. Thermal insulation products for building equipment and industrial installations. Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) p
BS EN 1395-7:2007 BS EN 1395-7:2007. Thermal spraying. Acceptance inspection of thermal spraying equipment. Powder feed system
05/30136538 DC 05/30136538 DC. prEN 14307. Thermal insulation products for building equipment and industrial installations. Factory made extruded polystyrene foam (XPS) products. Specification
05/30136552 DC 05/30136552 DC. prEN 14304. Thermal insulation products for building equipment and industrial installations. Factory made flexible elastomeric foam (FEF). Specification
05/30136556 DC 05/30136556 DC. prEN 14313. Thermal insulation products for building equipment and industrial installation. Factory made polyethylene foam (PEF) products. Specification
ISO22242 : 2005 EDTN 1 ISO22242 : 2005 EDTN 1. ISO22242 : 2005 Road construction and road maintenance machinery and equipment. Basic types. Identification and description
DD IEC/PAS 62267:2005 DD IEC/PAS 62267:2005. Railway applications. Automated urban guided transport (AUGT). Safety requirements
BS EN ISO 2814:2006, BS 3900-D4:2006 BS EN ISO 2814:2006, BS 3900-D4:2006. Paints and varnishes. Comparison of contrast ratio (hiding power) of paints of the same type and colour
05/30136650 DC 05/30136650 DC. IEC 60127-2 AMD 2. Miniature fuses. Part 2. Cartridge fuse-links
PD CEN/TR 15278:2006 PD CEN/TR 15278:2006. Workplace exposure. Strategy for the evaluation of dermal exposure
PD CISPR/TR 16-4-5:2006 PD CISPR/TR 16-4-5:2006. Specification for radio disturbance and immunity measuring apparatus and methods. Uncertainties, statistics and limit modelling. Conditions for the use
05/30136667 DC 05/30136667 DC. IEC 61000-6-3 ED 2. Electromagnetic compatibility (EMC). Part 6-3. Generic standards. Emission standard for residential, commercial and light-industrial environments
05/30136673 DC 05/30136673 DC. IEC 61000-6-4 ED 2. Electromagnetic compatibility (EMC). Part 6-4. Generic standards. Emission standard for industrial environments
BS ISO/IEC 16085:2006 BS ISO/IEC 16085:2006. Systems and software engineering. Life cycle processes. Risk management
DD CEN/TS 15231:2006 DD CEN/TS 15231:2006. Open data communication in building automation, controls and building management. Mapping between Lonworks and BACnet
DD IEC/TS 62228:2007 DD IEC/TS 62228:2007. Integrated circuits. EMC evaluation of CAN transceivers
BS EN 61788-7:2006 BS EN 61788-7:2006. Superconductivity. Electronic characteristic measurements. Surface resistance of superconductors at microwave frequencies
BS EN 2267-009:2005 BS EN 2267-009:2005. Aerospace series. Cables, electrical for general purpose. Operating temperatures between -55°C and 260°C. DRA family, single and multicore assembly. Product st
BS EN 2267-010:2005 BS EN 2267-010:2005. Aerospace series. Cables, electrical for general purpose. Operating temperatures between -55°C and 260°C. DR family, single UV laser printable. Product standar
05/30136813 DC 05/30136813 DC. IEC 60191-2/F63 ED 1. Proposed new package outline, power package with 34 pins
05/30136816 DC 05/30136816 DC. IEC 60191-2/F62 ED 1. Proposed new package outline, power package with 17 pins
BS EN 2591-220:2005 BS EN 2591-220:2005. Aerospace series. Elements of electrical and optical connection. Test methods. Contact/conductor joint ageing by current and temperature cycling
BS EN 2591-214:2005 BS EN 2591-214:2005. Aerospace series. Elements of electrical and optical connection. Test methods. Lightning strike, current and voltage pulse
BS EN 2591-212:2005 BS EN 2591-212:2005. Aerospace series. Elements of electrical and optical connection. Test methods. Surface transfer impedance
BS EN 2591-609:2005 BS EN 2591-609:2005. Aerospace series. Elements of electrical and optical connection. Test methods. Optical elements. Effectiveness of cable attachment. Cable cyclic flexing
06/30136833 DC 06/30136833 DC. ISO 21100. Air cargo unit load devices. Performance requirements and test parameters
BS EN 2853:2005 BS EN 2853:2005. Current ratings for electrical cables with conductor EN 2083
BS EN 3745-202:2005 BS EN 3745-202:2005. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Fibre dimensions
BS EN 3745-306:2005 BS EN 3745-306:2005. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Variation of attenuation during temperature cycling
BS EN 3745-401:2005 BS EN 3745-401:2005. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Accelerated ageing
BS EN 1860-3:2003 BS EN 1860-3:2003. Appliances, solid fuels and firelighters for barbecuing. Firelighters for igniting solid fuels for use in barbecue appliances. Requirements and test methods
BS EN 1860-1:2003 BS EN 1860-1:2003. Appliances, solid fuels and firelighters for barbecuing. Barbecues burning solid fuels. Requirements and test methods
BS ISO 17080:2005 BS ISO 17080:2005. Manually portable agricultural and forestry machines and powered lawn and garden equipment. Design principles for single-panel product safety labels
BS EN 15301-1:2007 BS EN 15301-1:2007. Surfaces for sports areas. Determination of rotational resistance
BS EN 15306:2007 BS EN 15306:2007. Surfaces for outdoor sports areas. Exposure of synthetic turf to simulated wear
BIP 2078:2007 BIP 2078:2007. Managing food safety the 22000 way
BIP 2079:2005 BIP 2079:2005. ISO 22000. Food safety management pack (due for publication November 2005)
BS EN 14343:2005 BS EN 14343:2005. Rotary positive displacement pumps. Performance tests for acceptance
DD CEN/TS 15279:2006 DD CEN/TS 15279:2006. Workplace exposure. Measurement of dermal exposure. Principles and methods
PD CEN/TR 15298:2006 PD CEN/TR 15298:2006. Foodstuffs. Sample comminution for mycotoxins analysis. Comparison between dry milling and slurry mixing
05/30137050 DC 05/30137050 DC. EN 15313. Railway applications. Wheelsets and bogies. Wheelset maintenance
BS EN 2546:2006 BS EN 2546:2006. Aerospace series. Washers, lock with radial serrations in corrosion resisting steel passivated for flight control rods. Dimensions
BS EN 2328:2006 BS EN 2328:2006. Aerospace series. Washers, tab in corrosion resisting steel, cadmium plated for flight control rods. Dimensions
BS EN 2327:2006 BS EN 2327:2006. Aerospace series. Washers, lock, with radial serrations in alloy steel, cadmium plated for flight control rods. Dimensions
BS EN 2336:2005 BS EN 2336:2005. Aerospace series. Bearings, spherical plain in steel with assembly slots. Dimensions and loads
BS EN 2337:2006 BS EN 2337:2006. Aerospace series. Spherical plain bearings. Technical specification
BS EN ISO 14912:2006 BS EN ISO 14912:2006. Gas analysis. Conversion of gas mixture composition data
ISO/IECTR15440 : 2005 EDTN1 ISO/IECTR15440 : 2005 EDTN1. ISO/IECTR15440 : 2005 Information technology - Future keyboards and other associated input devices and related entry methods
ISO6935-1 : 2007 EDTN2 ISO6935-1 : 2007 EDTN2. ISO6935-1 : 2007 Steel for the reinforcement of concrete. Part 1: Plain bars
ISO6935-2 : 2007 EDTN2 ISO6935-2 : 2007 EDTN2. ISO6935-2 : 2007 Steel for the reinforcement of concrete. Part 1: Ribbed bars
06/30137125 DC 06/30137125 DC. ISO 15011-3. Health and safety in welding and allied processes. Laboratory method for sampling fume and gases. Part 3. Determination of ozone emission rate
BS EN 60127-4:2005+A1:2009 BS EN 60127-4:2005+A1:2009. Miniature fuses. Universal modular fuse-links (UMF). Through-hole and surface mount types
BS EN 4590:2005 BS EN 4590:2005. Aerospace series. Retainers, spring, sheet metal, for self-locking barrel nuts, in corrosion resisting steel, passivated
BS EN 4498:2005 BS EN 4498:2005. Aerospace series. Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated, with aluminium pi
BS EN 4497:2005 BS EN 4497:2005. Aerospace series. Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating.
BS EN 4307:2005 BS EN 4307:2005. Aerospace series. Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness)
BS EN 4306:2005 BS EN 4306:2005. Aerospace series. Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness)
BS EN 4304:2005 BS EN 4304:2005. Aerospace series. Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness)
BS EN 4303:2005 BS EN 4303:2005. Aerospace series. Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness)
BS EN 4591:2005 BS EN 4591:2005. Aerospace series. Nuts, barrel, self-locking, floating, self-aligning,in heat resisting nickel base alloy, MoS2 lubricated. Classification: 15 50 MPa (at ambient tempe
BS EN 4176:2005 BS EN 4176:2005. Aerospace series. Lockbolts, 100° countersunk normal head or protruding head, tension-/ sheartype, close tolerance, in titanium alloy TI-P64001, anodized or with alumi
BS EN 2335:2005 BS EN 2335:2005. Aerospace series. Bearings, spherical plain in corrosion resisting steel without assembly slot. Dimensions and loads
BS 8408:2005 BS 8408:2005. Road traffic signs. Testing and performance of microprismatic retroreflective sheeting materials. Specification
DD CEN/TS 15289:2006 DD CEN/TS 15289:2006. Solid biofuels. Determination of total content of sulphur and chlorine
DD CEN/TS 15290:2006 DD CEN/TS 15290:2006. Solid biofuels. Determination of major elements
DD CEN/TS 15296:2006 DD CEN/TS 15296:2006. Solid biofuels. Calculation of analyses to different bases
DD CEN/TS 15297:2006 DD CEN/TS 15297:2006. Solid biofuels. Determination of minor elements
ISO2321 : 2006 EDTN3 ISO2321 : 2006 EDTN3. ISO 2321 Rubber threads - Method of test
BS ISO 20828:2006 BS ISO 20828:2006. Road vehicles. Security certificate management
BS ISO 22672:2006 BS ISO 22672:2006. Space data and information transfer systems. Space link extension (SLE). Forward space packet service
BS ISO 22644:2006 BS ISO 22644:2006. Space data and information transfer systems. Orbit data messages
BS EN 13136:2001 BS EN 13136:2001. Refrigerating systems and heat pumps. Pressure relief devices and their associated piping. Methods for calculation
BS EN 61753-101-2:2006 BS EN 61753-101-2:2006. Fibre optic interconnecting devices and passive components performance standard. Fibre management systems for category C. Controlled environment
BS EN 60086-1:2007 BS EN 60086-1:2007. Primary batteries. General
BS EN 1364-3:2006 BS EN 1364-3:2006. Fire resistance tests for non-loadbearing elements. Curtain walling. Full configuration (complete assembly)
BS EN 2607:2005 BS EN 2607:2005. Aerospace series. O-rings for adaptors, threaded, with lockring. Survey
ISO/TS9941 : 2005 EDTN2 ISO/TS9941 : 2005 EDTN2. ISO/TS9941 : 2005 Milk and canned evaporated milk - Determination of tin contant - Spectrometric method
BS EN 1146:2005 BS EN 1146:2005. Respiratory protective devices. Selfcontained open-circuit compressed air breathing apparatus incorporating a hood for escape. Requirements, testing, marking
BS EN ISO 6134:2005 BS EN ISO 6134:2005. Rubber hoses and hose assemblies for saturated steam. Specification
DD ISO/TS 10465-1:2007 DD ISO/TS 10465-1:2007. Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP). Installation procedures
ISO/IECTR23000-1 : 2007 EDTN1 ISO/IECTR23000-1 : 2007 EDTN1. ISO/IECTR23000-1 : 2007 Information technology - Multimedia application format (MPEG-A). Part 1 : Purpose for multimedia application format
BS EN 12666-1:2005 BS EN 12666-1:2005. Plastics piping systems for non-pressure underground drainage and sewerage. Polyethylene (PE). Specifications for pipes, fittings and the system
06/30137498 DC 06/30137498 DC. EN 415-9. Safety of packaging machines. Part 9. Noise measurement methods for packaging machines, packaging lines and auxiliary equipment. Grade 2 and 3 accuracy
05/30137514 DC 05/30137514 DC. IEC 60747-14-4. Discrete semiconductordevices. Part 14-4. Semiconductor accelerometers
BS EN 13141-5:2004 BS EN 13141-5:2004. Ventilation for buildings. Performance testing of components/products for residential ventilation. Cowls and roof outlet terminal devices
BS EN ISO 17249:2004 BS EN ISO 17249:2004. Safety footwear with resistance to chain saw cutting
BS EN 2714-013:2005 BS EN 2714-013:2005. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 260°C. DR family, screened (spiral) an
BS EN ISO 20344:2004 BS EN ISO 20344:2004. Personal protective equipment. Test methods for footwear
BS EN ISO 7998:2005 BS EN ISO 7998:2005. Ophthalmic optics. Spectacle frames. Lists of equivalent terms and vocabulary
BS EN ISO 20345:2004 BS EN ISO 20345:2004. Personal protective equipment. Safety footwear
BS EN ISO 20347:2004 BS EN ISO 20347:2004. Personal protective equipment. Occupational footwear
BS EN ISO 20346:2004 BS EN ISO 20346:2004. Personal protective equipment. Protective footwear
ISO21415-2 : 2006 EDTN1 ISO21415-2 : 2006 EDTN1. ISO21415-2 : 2006 Wheat and wheat flour - Gluten content. Part 2 : Determination of wet gluten by mechanical means
BS ISO 8262-3:2005 BS ISO 8262-3:2005. Milk products and milk-based foods. Determination of fat content by the Weibull-Berntrop gravimetric method (Reference method). Special cases
BS EN 3745-402:2005 BS EN 3745-402:2005. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Temperature cycling
BS EN 3745-404:2005 BS EN 3745-404:2005. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Thermal shock
BS EN 3745-406:2005 BS EN 3745-406:2005. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Cold bend test
BS EN 3745-407:2005 BS EN 3745-407:2005. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Flammability
BS EN 3745-503:2005 BS EN 3745-503:2005. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Scrape abrasion
BS EN 3745-513:2005 BS EN 3745-513:2005. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Crush resistance
BS EN 3475-414:2005 BS EN 3475-414:2005. Aerospace series. Cables, electrical, aircraft use. Test methods. Differential scanning calorimeter (DSC test)
BS ISO 21148:2005 BS ISO 21148:2005. Cosmetics. Microbiology. General instructions for microbiological examimation
BS ISO 21149:2006 BS ISO 21149:2006. Cosmetics. Microbiology. Enumeration and detection of aerobic mesophilic bacteria
BS ISO 21150:2006 BS ISO 21150:2006. Cosmetics. Microbiology. Detection of Escherichia coli
BS ISO 22715:2006 BS ISO 22715:2006. Cosmetics. Packaging and labelling
BS ISO 22717:2006 BS ISO 22717:2006. Cosmetics. Microbiology. Detection of Pseudomonas aeruginosa
BS ISO 22718:2006 BS ISO 22718:2006. Cosmetics. Microbiology. Detection of Staphylococcus aureus
BS ISO 11357-4:2005 BS ISO 11357-4:2005. Plastics. Differential scanning calorimetry (DSC). Determination of specific heat capacity
PD CLC/TR 62102:2006 PD CLC/TR 62102:2006. Electrical safety. Classification of interfaces for equipment to be connected to information and communications technology networks
BS EN 14870-3:2006 BS EN 14870-3:2006. Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems. Flanges
PD CEN/TR 15128:2005 PD CEN/TR 15128:2005. Survey of European standards for rehabilitation of drain and sewer systems
BS EN 14453:2005 BS EN 14453:2005. Devices to prevent pollution by backflow of potable water. Pipe interrupter with permanent atmospheric vent DN 10 to DN 20. Family D, type C
BS EN 14454:2005 BS EN 14454:2005. Devices to prevent pollution by backflow of potable water. Hose union backflow preventer DN 15 to DN 32 inclusive. Family H, type A
BIP 3044:2005 BIP 3044:2005. BS 8300 Design of buildings and their approaches to meet the needs of disabled people. Code of practice CD-ROM
BIP 0084:2005 BIP 0084:2005. ITSMF. Planning to implement service management pocketbook
BIP 0083:2005 BIP 0083:2005. ITSMF. ICT infrastructure management pocketbook
BIP 0082:2005 BIP 0082:2005. ITSMF. A dictionary of IT service management terms, acronyms and abbreviations pocketbook
BIP 0081:2005 BIP 0081:2005. ITSMF. Application management pocketbook
BIP 0080:2005 BIP 0080:2005. ITSMF. IT service management pocketbook
BS ISO 14435:2005 BS ISO 14435:2005. Carbonaceous materials for the production of aluminium. Petroleum coke. Determination of trace metals by inductively coupled plasma atomic emission spectrometry
BS 8476:2007 BS 8476:2007. Code of practice for the safe use of concrete pumps
06/30137708 DC 06/30137708 DC. EN 13618-1. Water supply. Hose assemblies. Part 1. Flexible hose assemblies with or without braiding
06/30137711 DC 06/30137711 DC. EN 13618-2. Water supply. Hose assemblies. Part 2. Semi rigid assemblies with or without braiding
BS 6465-3:2006 BS 6465-3:2006. Sanitary installations. Code of practice for the selection, installation and maintenance of sanitary and associated appliances
05/30137732 DC 05/30137732 DC. ISO 11088 AMD 1. Assembly, adjustment and inspection of an alpine ski-binding-boot (S-B-B) system
05/30137738 DC 05/30137738 DC. ISO 9523. Touring ski-boots for adults. Interface with touring ski-bindings. Requirements and test methods
06/30137794 DC 06/30137794 DC. ISO 24353. Hygrothermal performance of building materials and products. Determination of moisture adsorption/desorption properties in response to humidity variation
BS ISO 3776-1:2006 BS ISO 3776-1:2006. Tractors and machinery for agriculture. Seat belts. Anchorage location requirements
BS ISO 9679:2006 BS ISO 9679:2006. Aerospace. Clamps for fluid systems. Test methods
BS ISO 12319:2006 BS ISO 12319:2006. Aerospace. 'P' (loop style) clamps. Procurement specification
BS 8477:2007 BS 8477:2007. Code of practice for customer service
ISO13602-2 : 2006 EDTN 1 (R08) ISO13602-2 : 2006 EDTN 1 (R08). ISO13602-2 : 2006 Technical energy systems - Methods for analysis. Part 2: Weighting and aggregation and of energywares
BS 9250:2007 BS 9250:2007. Code of practice for design of the airtightness of ceilings in pitched roofs
05/30137922 DC 05/30137922 DC. ISO 13865-3. Safety of machinery. Pressure-sensitive protective devices. Part 3. General principles for the design and testing of pressure-sensitive bumpers, plates, wir
ISO16100-4 : 2006 EDTN1 ISO16100-4 : 2006 EDTN1. Industrial automation systems and integration - Manufacturing software capability profiling for interoperability -. Part 4: Conformance test methods, c
BS EN 14561:2006 BS EN 14561:2006. Chemical disinfectants and antiseptics. Quantitative carrier test for the evaluation of bactericidal activity for instruments used in the medical area. Test method a
BS EN 14562:2006 BS EN 14562:2006. Chemical disinfectants and antiseptics. Quantitative carrier test for the evaluation of fungicidal or yeasticidal activity for instruments used in the medical area.
05/30137946 DC 05/30137946 DC. EN 15269-1. Extended application of test results for fire resistance for doorsets and shutter assemblies. For doors and windows. Part 1. General requirements for fire re
05/30137949 DC 05/30137949 DC. EN 15269-3. Extended application of test results for fire resistance for doorsets and shutter assemblies. For doors and shutters. Part 3. Timber hinged and pivoted doors
BS EN 2002-1:2005 BS EN 2002-1:2005. Aerospace series. Metallic materials. Test methods. Tensile testing at ambient temperature
PD CEN/TR 15314:2006 PD CEN/TR 15314:2006. Durability of wood and wood-based products. Quantitative determination of quaternary ammonium compounds in wood
PAS 81:2005 PAS 81:2005. Specification for the management and operation of swimming pools
PAS 80:2005 PAS 80:2005. Automotive garage services - Service and repair of vehicles - Technical and customer service - Specification
BS EN 12691:2006 BS EN 12691:2006. Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of resistance to impact
05/30137978 DC 05/30137978 DC. EN 15273-1. Railway applications. Gauges. Part 1. Generalities. Common rules for infrastructure and rolling stock
05/30137981 DC 05/30137981 DC. EN 15273-2. Railway applications. Gauges. Part 2. Rolling stock gauges
05/30137984 DC 05/30137984 DC. EN 15273-3. Railway applications. Gauges. Part 3. Structure gauges
BS ISO 18164:2005 BS ISO 18164:2005. Passenger car, truck, bus and motorcycle tyres. Methods of measuring rolling resistance
ISO/IECTR24746 : 2005 EDTN 1 ISO/IECTR24746 : 2005 EDTN 1. ISO/IECTR24746 : 2005 Information technology. Generic cabling for customer premises Mid-Span DTE Power insertion.
PAS 75:2005 PAS 75:2005. Specification for the service and provision of printing services
BS ISO 9911:2006 BS ISO 9911:2006. Agricultural irrigation equipment. Manually operated small plastics valves
BS EN 215:2004 BS EN 215:2004. Thermostatic radiator valves. Requirements and test methods
BS 8478:2006 BS 8478:2006. Respiratory protective devices. Breathing gases for diving and hyperbaric applications
BS EN 62271-109:2006 BS EN 62271-109:2006. High-voltage switchgear and controlgear. Alternating-current series capacitor by-pass switches
BS ISO 9635-1:2006 BS ISO 9635-1:2006. Agricultural irrigation equipment. Irrigation valves. General requirements
BS ISO 9635-2:2006 BS ISO 9635-2:2006. Agricultural irrigation equipment. Irrigation valves. Isolating valves
BS ISO 9635-3:2006 BS ISO 9635-3:2006. Agricultural irrigation equipment. Irrigation valves. Check valves
BS ISO 9635-4:2006 BS ISO 9635-4:2006. Agricultural irrigation equipment. Irrigation valves. Air valves
BS ISO 9635-5:2006 BS ISO 9635-5:2006. Agricultural irrigation equipment. Irrigation valves. Control valves
BS 7941-1:2006 BS 7941-1:2006. Methods for measuring the skid resistance of pavement surfaces. Sideway-force coefficient routine investigation machine
05/30138231 DC 05/30138231 DC. ISO 8407. Corrosion of metals and alloys. Removal of corrosion products from corrosion test specimens
PD CISPR/TR 16-4-1:2003 PD CISPR/TR 16-4-1:2003. Specification for radio disturbance and immunity measuring apparatus and methods. Uncertainties, statistics and limit modelling. Uncertainties in stand
BS 7499:2002 BS 7499:2002. Static site guarding and mobile patrol services. Code of practice
BS EN 12592:2007, BS 2000-47:2007 BS EN 12592:2007, BS 2000-47:2007. Bitumen and bituminous binders. Determination of solubility
BS EN 1426:2007, BS 2000-49:2007 BS EN 1426:2007, BS 2000-49:2007. Bitumen and bituminous binders. Determination of needle penetration
BS EN 12593:2007, BS 2000-80:2007 BS EN 12593:2007, BS 2000-80:2007. Bitumen and bituminous binders. Determination of the Fraass breaking point
BS EN 1427:2007, BS 2000-58:2007 BS EN 1427:2007, BS 2000-58:2007. Bitumen and bituminous binders. Determination of the softening point. Ring and Ball method
BS EN 12595:2007, BS 2000-319:2007 BS EN 12595:2007, BS 2000-319:2007. Bitumen and bituminous binders. Determination of kinematic viscosity
BS EN 12594:2007, BS 2000-461:2007 BS EN 12594:2007, BS 2000-461:2007. Bitumen and bituminous binders. Preparation of test samples
BS EN 12596:2007, BS 2000-222:2007 BS EN 12596:2007, BS 2000-222:2007. Bitumen and bituminous binders. Determination of dynamic viscosity by vacuum capillary
BS EN 12606-1:2007, BS 2000-459.1:2007 BS EN 12606-1:2007, BS 2000-459.1:2007. Bitumen and bituminous binders. Determination of the paraffin wax content. Method by distillation
BS EN 12607-1:2007, BS 2000-460.1:2007 BS EN 12607-1:2007, BS 2000-460.1:2007. Bitumen and bituminous binders. Determination of the resistance to hardening under influence of heat and air. RTFOT metho
BS EN 12607-2:2007, BS 2000-460.2:2007 BS EN 12607-2:2007, BS 2000-460.2:2007. Bitumen and bituminous binders. Determination of the resistance to hardening under influence of heat and air. TFOT Method
BS EN 12607-3:2007, BS 2000-460.3:2007 BS EN 12607-3:2007, BS 2000-460.3:2007. Bitumen and bituminous binders. Determination of the resistance to hardening under influence of heat and air. RFT Method
BS 4163:2007 BS 4163:2007. Health and safety for design and technology in schools and similar establishments. Code of practice
BS EN 14257:2006 BS EN 14257:2006. Adhesives. Wood adhesives. Determination of tensile strength of lap joints at elevated temperature (WATT '91)
BS5261C : 2005 (Pack of 10) BS5261C : 2005 (Pack of 10).
BS5261C : 2005 (Pack of 20) BS5261C : 2005 (Pack of 20).
BS5261C : 2005 (Pack of 50) BS5261C : 2005 (Pack of 50).
BS 5261C:2005 (Pack of 100 laminated) BS 5261C:2005 (Pack of 100 laminated).
05/30138350 DC 05/30138350 DC. EN 15322. Bitumen and bituminous binders. Framework for specifying cutback and fluxed bituminous binders
BS EN 15323:2007, BS 2000-551:2007 BS EN 15323:2007, BS 2000-551:2007. Bitumen and bituminous binders. Accelerated long-term ageing/conditioning by the rotating cylinder method (RCAT)
BS 8418:2003 BS 8418:2003. Installation and remote monitoring of detector activated CCTV systems. Code of practice
06/30138366 DC 06/30138366 DC. ISO 9241-20. Ergonomics of human-system interaction. Part 20. Accessibility guidelines for information/communication technology (ICT) equipment and services
BS EN 60335-2-29:2004 BS EN 60335-2-29:2004. Specification for safety of household and similar electrical appliances. Particular requirements. Particular requirements for battery chargers
05/30138385 DC 05/30138385 DC. EN 50440. Efficiency of domestic electrical storage water-heaters
06/30138405 DC 06/30138405 DC. ISO 8539. Forged steel components for lifting slings. Grade 8
CWA 15375:2005 CWA 15375:2005. Separators for marine residual fuel. Performance testing using specific test oil.
CWA 15374:2005 CWA 15374:2005. Security management system for suppliers to the secure printing industry
CWA 15295:2005 CWA 15295:2005. Description of references and data models for classification
05/30138425 DC 05/30138425 DC. ISO 4254-5. Agricultural machinery. Safety. Part 5. Power-driven soil-working equipment
BS EN ISO 20623:2003 BS EN ISO 20623:2003. Petroleum and related products. Determination of the extreme-pressure and anti-wear properties of fluids. Four ball method (European conditions)
05/30138432 DC 05/30138432 DC. BS EN 1501-1. Refuse collection vehicles. General requirements and safety reqirements. Part 1. Rear loaded refuse collection vehicles
BS EN 13501-1:2007 BS EN 13501-1:2007. Fire classification of construction products and building elements. Classification using data from reaction to fire tests
BS EN ISO 16276-2:2007 BS EN ISO 16276-2:2007. Corrosion protection of steel structures by protective paint systems. Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strengt
ISO/IEC11179-2 : 2005 EDTN2 ISO/IEC11179-2 : 2005 EDTN2. ISO/IEC11179-2 : 2005 Information technology -- Metadata registries (MDR). Part 2: Classification
PD CLC/TR 50469:2005 PD CLC/TR 50469:2005. Lightning protection systems. Symbols
BS EN 60669-2-2:2006 BS EN 60669-2-2:2006. Switches for household and similar fixed electrical installations. Particular requirements. Electromagnetic remote-control switches (RCS)
BS EN 60669-2-3:2006 BS EN 60669-2-3:2006. Switches for household and similar fixed electrical installations. Particular requirements. Time delay switches (TDS)
BS EN ISO 18453:2005 BS EN ISO 18453:2005. Natural gas. Correlation between water content and water dew point
05/30138572 DC 05/30138572 DC. IEC 61196-1-300. Coaxial communication cables. Mechanical test methods. Part 1-300. General requirements
WD/ISO/IEC25437 : 2006 EDTN1 WD/ISO/IEC25437 : 2006 EDTN1. ISO/IEC25437 : 2006 Information techonology - Telecommunications and information exchange between systems - WS-Session - Web Services for App
ISO/IEC25436 : 2006 EDTN1 ISO/IEC25436 : 2006 EDTN1. ISO/IEC25436 : 2006 Information technology - Eiffel: Analysis, design and programming language
BS 6007:2006 BS 6007:2006. Electric cables. Single core unsheathed heat resisting cables forvoltages up to and including 450/750 V, for internal wiring
05/30138594 DC 05/30138594 DC. ISO/IEC 22535. Corporate Telecommunication Networks. Tunnelling of QSIG over SIP
WD/ISO/IEC22535 : 2006 EDTN2 WD/ISO/IEC22535 : 2006 EDTN2. ISO/IEC22535 : 2006 Information technology - Telecommunications and information exchange between systems - Corporate Telecommunication Networ
BS 6195:2006 BS 6195:2006. Electric cables. Rubber or silicone rubber insulated flexible cables and cords for coil end leads
06/30138608 DC 06/30138608 DC. IEC 60601-2-56. Medical electrical equipment. Part 2-56. Particular requirements for basic safety and essential performance of screening thermographs for human febrile t
PD ISO/TR 23602:2005 PD ISO/TR 23602:2005. Toughness of chain steels
WD/BIP0012UPDATE3:2005BiometricsFCN,GLOS WD/BIP0012UPDATE3:2005BiometricsFCN,GLOS.
BS ISO 19013-1:2005 BS ISO 19013-1:2005. Rubber hoses and tubing for fuel circuits for internal combustionengines . Specification. Diesel fuels
WD/ISO/IEC14496-22 : 2007 EDTN1 WD/ISO/IEC14496-22 : 2007 EDTN1. ISO/IEC14496-22 : 2007 Information technology -- Coding of audio-visual objects. Part 22: Open Font Format
BS ISO 17356-4:2005 BS ISO 17356-4:2005. Road vehicles. Open interface for embedded automotive applications. OSEK/VDX Communication (COM)
BS ISO 17356-6:2006 BS ISO 17356-6:2006. Road vehicles. Open interface for embedded automotive applications. OSEK/VDX implementation language (OIL)
BS ISO 17356-5:2006 BS ISO 17356-5:2006. Road vehicles. Open interface for embedded automotive applications. OSEK/VDX Network Management (NM)
PD CLC/TR 50448:2005 PD CLC/TR 50448:2005. Guide to levels of competence required in laser safety
BS ISO 17356-3:2005 BS ISO 17356-3:2005. Road vehicles. Open interface for embedded automotive applications. OSEK/VDX operating system (OS)
BS EN 12261:2002 BS EN 12261:2002. Gas meters. Turbine gas meters
BS ISO 4930:2006 BS ISO 4930:2006. Road vehicles. Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (service temperature 150°C max.)
05/30138753 DC 05/30138753 DC. EN 71-1 AMD 1. Safety of toys. Part 1. Mechanical and physical properties
BS EN 50470-1:2006 BS EN 50470-1:2006. Electricity metering equipment (a.c.). General requirements, tests and test conditions. Metering equipment (class indexes A, B and C)
BS EN 50470-2:2006 BS EN 50470-2:2006. Electricity metering equipment (a.c.). Particular requirements. Electromechanical meters for active energy (class indexes A and B)
BS EN 50470-3:2006 BS EN 50470-3:2006. Electricity metering equipment (a.c.). Particular requirements. Static meters for active energy (class indexes A, B and C)
BS EN 352-5:2002 BS EN 352-5:2002. Hearing protectors. Safety requirements and testing. Active noise reduction ear muffs
BS ISO/IEC 14763-3:2006 BS ISO/IEC 14763-3:2006. Information technology. Implementation and operation of customer premises cabling. Testing of optical fibre cabling
06/30138861 DC 06/30138861 DC. ISO 18436-4. Condition monitoring and diagnostics of machines. Requirements for training and certification of personnel. Part 4. Industrial lubricant analysis
06/30138864 DC 06/30138864 DC. ISO 18436-8. Condition monitoring and diagnostics of machines. Requirements for training and certification of personnel. Part 8. Thermography
BS IEC 60671:2007 BS IEC 60671:2007. Nuclear power plants. Instrumentation and control systems important to safety. Surveillance testing
BIP 2036:2006 BIP 2036:2006. The Risk Management Universe: a guided tour
ISO12052 : 2006 EDTN1 ISO12052 : 2006 EDTN1. ISO 12052 Health informatics - Digital imaging and communication in medicine (DICOM) including workflow and data management
BS EN 1504-7:2006 BS EN 1504-7:2006. Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. Reinforcement c
BS EN 12101-1:2006 BS EN 12101-1:2006. Smoke and heat control systems. Specification for smoke barriers
BS EN 61747-3:2006 BS EN 61747-3:2006. Liquid crystal display devices. Liquid crystal display (LCD) cells. Sectional specification
BS EN 676:2003+A2:2008 BS EN 676:2003+A2:2008. Automatic forced draught burners for gaseous fuels
BS EN ISO 16484-6:2005 BS EN ISO 16484-6:2005. Building automation and control systems (BACS). Data communication conformance testing
BS EN 15334:2007 BS EN 15334:2007. Sanitary appliances. Methacrylic dispersions of high filler content
BS EN 4458:2005 BS EN 4458:2005. Aerospace series. Studs, MJ threads, in titanium alloy TI-P64001, MoS2 coated, with serrated locking ring in corrosion resisting steel.Strengt h class: 1100 MPa (at am
BS EN 4175:2005 BS EN 4175:2005. Aerospace series. Collars, flanged swage locking, sheartype, in titanium TI-P99002, metric series
BS EN 4459:2005 BS EN 4459:2005. Aerospace series. Studs, in titanium alloy TI-P64001, with serrated locking ring in corrosion resisting steel. Design standard
BS EN 4460:2005 BS EN 4460:2005. Aerospace series. Studs, in titanium alloy TI-P64001, with serrated locking ring in corrosion resisting steel. Installation and removal procedure
KIT 177 KIT 177. Conformity assessment kit
KIT 178 KIT 178. Conformity assessment kit no. 2
BS EN 61000-4-20:2003 BS EN 61000-4-20:2003. Electromagnetic Compatibility (EMC). Testing and measurement techniques. Emission and immunity testing in transverse electromagnetic (TEM) waveguides
06/30139190 DC 06/30139190 DC. ISO 8124-1 AMD 2. Safety of toys. Part 1. Safety aspects related to mechanical and physical properties
06/30139194 DC 06/30139194 DC. ISO 8124-2. Safety of toys. Part 2. Flammability
ISO8124-2 : 2007 EDTN2 ISO8124-2 : 2007 EDTN2. ISO 8124-2 Safety of toys -. Part 2: Flammability
BS EN 12572-1:2007 BS EN 12572-1:2007. Artificial climbing structures. Safety requirements and test methods for ACS with protection points
05/30139208 DC 05/30139208 DC. HD 361 S3 AMD 1. System for cable designation
BS EN 15339-2:2007 BS EN 15339-2:2007. Thermal spraying. Safety requirements for thermal spraying equipment. Gas control units
BS EN 15340:2007 BS EN 15340:2007. Thermal spraying. Determination of shear load resistance of thermally sprayed coatings
05/30139275 DC 05/30139275 DC. EN 624 AMD 1. Specification for dedicated LPG appliances. Room sealed LPG space heating equipment for installation in vehicles and boats
BS EN 15336:2007 BS EN 15336:2007. Adhesives. Determination of the time to rupture of bonded joints under static load
BS ISO 12647-2:2004 BS ISO 12647-2:2004. Graphic technology. Process control for the production of half-tone colour separations, proof and production prints. Offset lithographic processes
BS EN ISO 291:2005 BS EN ISO 291:2005. Plastics. Standard atmospheres for conditioning and testing
BS EN 60601-2-33:2002+A2:2008 BS EN 60601-2-33:2002+A2:2008. Medical electrical equipment. Particular requirements for the safety of magnetic resonance equipment for medical diagnosis
BS EN ISO 3738-2:2006 BS EN ISO 3738-2:2006. Hardmetals. Rockwell hardness test (scale A). Preparation and calibration of standard test blocks
BS EN ISO 13944:2006 BS EN ISO 13944:2006. Lubricated metal-powder mixes. Determination of lubricant content. Modified Soxhlet extraction method
BS EN ISO 4491-3:2006 BS EN ISO 4491-3:2006. Metallic powders. Determination of oxygen content by reduction methods. Hydrogen-reducible oxygen
BS ISO/IEC 4909:2006 BS ISO/IEC 4909:2006. Identification cards. Financial transaction cards. Magnetic stripe data content for track 3
BS ISO/IEC 7813:2006 BS ISO/IEC 7813:2006. Information technology. Identification cards. Financial transaction cards
BS ISO/IEC 11694-5:2006 BS ISO/IEC 11694-5:2006. Identification cards. Optical memory cards. Linear recording method. Data format for information interchange for applications using ISO/IEC 11694-4, an
BS ISO/IEC 11694-6:2006 BS ISO/IEC 11694-6:2006. Identification cards. Optical memory cards. Linear recording method. Use of biometrics on an optical memory card
ISO/TR22676 : 2006 EDTN1 ISO/TR22676 : 2006 EDTN1. ISO 22676 Prosthetics - Testing of ankle-foot devices and foot units - Guidance on the application of the test loading conditions of ISO 22675 and on
BS 8300:2001 BS 8300:2001. Design of buildings and their approaches to meet the needs of disabled people. Code of practice
05/30139447 DC 05/30139447 DC. ISO 21601. Guidelines for assessing the significance of stress corrosion cracks detected in service
ISO16732 : 2005 EDTN 1 ISO16732 : 2005 EDTN 1. ISO16732 : 2005 Fire safety engineering - Guidance on fire risk assessment
06/30139466 DC 06/30139466 DC. ISO 3046-4. Recipricating internal combustion engines. Performance. Part 4. Speed governing
PAS78 : 2005 Easyread Format PAS78 : 2005 Easyread Format. PAS78 : 2005 (Easyread format) Guide to good practice in commissioning accessible websites
PAS78 : 2005 Large Print PAS78 : 2005 Large Print. PAS78 : 2005 (Large Print) Guide to good practice in commissioning accessible websites
PAS78 : 2005 CD ROM Format PAS78 : 2005 CD ROM Format. PAS78 : 2005 (Disk Format) Guide to good practice in commissioning accessible websites
PAS78 : 2005 Audio format PAS78 : 2005 Audio format. PAS78 : 2005 (Audio Format) Guide to good practice in commissioning accessible websites
BS ISO 8967:2005 BS ISO 8967:2005. Dried milk and dried milk products. Determination of bulk density
ISO22033 : 2005 EDTN1 ISO22033 : 2005 EDTN1. ISO22033 : 2005 Nickel alloys - Determination of niobium content - Inductively coupled plasma atomic emmision spectrometric method
BS EN 581-3:2007 BS EN 581-3:2007. Outdoor furniture. Seating and tables for camping, domestic and contract use. Mechanical safety requirements and test methods for tables
BS 5837:2005 BS 5837:2005. Trees in relation to construction. Recommendations
BS 1722-1:2006 BS 1722-1:2006. Fences. Specification for chain link fences
BS 1722-2:2006 BS 1722-2:2006. Fences. Specification for strained wire and wire mesh netting fences
BS 1722-5:2006 BS 1722-5:2006. Fences. Specification for close-boarded and wooden palisade fences
BS 1722-7:2006 BS 1722-7:2006. Fences. Specification for wooden post and rail fences
BS 1722-8:2006 BS 1722-8:2006. Fences. Specification for mild steel (low carbon steel) continuous bar fences and hurdles
05/30139505 DC 05/30139505 DC. BS EN ISO 6185-4. Inflatable boats. Part 4. Boats with an overall length of between 8m and 24m and with a motor maximum power rating of 75kW and greater
BS 1722-9:2006 BS 1722-9:2006. Fences. Specification for mild steel (low carbon steel) fences with round or square verticals and flat horizontals
BS 1722-10:2006 BS 1722-10:2006. Fences. Specification for anti-intruder fences in chain link and welded mesh
BS 1722-11:2006 BS 1722-11:2006. Fences. Specification for prefabricated wood panel fences
BS 1722-14:2006 BS 1722-14:2006. Fences. Specification for open mesh steel panel fences
BS 1722-17:2006 BS 1722-17:2006. Fences. Specification for electric security fences. Design, installation and maintenance
BS EN ISO 1101:2005 BS EN ISO 1101:2005. Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out
BS ISO 19334:2006 BS ISO 19334:2006. Binders for paints and varnishes. Gum rosin. Gas-chromatographic analysis
BS ISO 15585:2006 BS ISO 15585:2006. Hard coal. Determination of caking index
BS EN ISO 105-C08:2002+A1:2008 BS EN ISO 105-C08:2002+A1:2008. Textiles. Tests for colour fastness. Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent inco
BIP 3014:2005 BIP 3014:2005. ISO 9000 Quality management. Achieving registration CD-ROM
BS EN 12407:2007 BS EN 12407:2007. Natural stone test methods. Petrographic examination
BS EN 1337-3:2005 BS EN 1337-3:2005. Structural bearings. Elastomeric bearings
BS EN 1337-5:2005 BS EN 1337-5:2005. Structural bearings. Pot bearings
BIP 3047:2005 BIP 3047:2005. ISO 9000 Quality management systems CD-ROM
BIP 2039:2005 BIP 2039:2005. ISO 9000 Quality management. Achieving registration ((Sale suspended pending the publication of an A5 laminated version of BS EN ISO 9001:2008.)
BS EN 14197-2:2003+A1:2006 BS EN 14197-2:2003+A1:2006. Cryogenic vessels. Static non-vacuum insulated vessels. Design, fabrication, inspection and testing
05/30139861 DC 05/30139861 DC. ISO 15706 AMD 1. Information and documentation. International Standard Audiovisual Number (ISAN)
BS 25999-1:2006 (Paperback) BS 25999-1:2006 (Paperback). Business continuity management. Code of practice
BIP 0024:2005 BIP 0024:2005. Proteus compliance evaluation
ISO IWA 1 : 2005 ISO IWA 1 : 2005 . ISO IWA 1 : 2005 Quality Management Systems - Guidelines for process improvements in health service organizations
BS EN 13914-1:2005 BS EN 13914-1:2005. Design, preparation and application of external rendering and internal plastering. External rendering
BS EN 13914-2:2005 BS EN 13914-2:2005. Design, preparation and application of external rendering and internal plastering. Design considerations and essential principles for internal plastering
BS EN 62258-5:2006 BS EN 62258-5:2006. Semiconductor die products. Requirements for information concerning electrical simulation
BS EN 62258-6:2006 BS EN 62258-6:2006. Semiconductor die products. Requirements for information concerning thermal simulation
05/30139930 DC 05/30139930 DC. IEC 60684-3-246 ED 3. Flexible insulating sleeving. Part 3. Specifications for individual types of sleeving. Sheet 246. Heatshrinkable polyolefin sleeving, dual wall, no
BS ISO 2910:2007 BS ISO 2910:2007. Cinematography. Screen luminance and chrominance for the projection of motion pictures
ISO/IWA3 : 2005 ISO/IWA3 : 2005 . ISO/IWA3 : 2005 Image safety. Reducing the incience of undesirable biomedical effects caused by visual image sequences.
BS ISO 9727-1:2007 BS ISO 9727-1:2007. Cylindrical cork stoppers. Physical tests. Determination of dimensions
BS ISO 9727-3:2007 BS ISO 9727-3:2007. Cylindrical cork stoppers. Physical tests. Determination of humidity content
BS ISO 9727-4:2007 BS ISO 9727-4:2007. Cylindrical cork stoppers. Physical tests. Determination of dimensional recovery after compression
BS ISO 9727-5:2007 BS ISO 9727-5:2007. Cylindrical cork stoppers. Physical tests. Determination of extraction force
BS ISO 9727-6:2007 BS ISO 9727-6:2007. Cylindrical cork stoppers. Physical tests. Determination of liquid tightness
BS EN 14508:2003 BS EN 14508:2003. Postal services. Quality of service. Measurement of the transit time of end-to-end services for single piece non-priority mail and second class mail
BS EN 13850:2002 BS EN 13850:2002. Postal services. Quality of service. Measurement of the transit time of end-to-end services for single piece priority mail and first class mail
BS ISO 11866-1:2005 BS ISO 11866-1:2005. Milk and milk products. Enumeration of presumptive Escherichia coli. Most probable number technique using 4-methylumbelliferyl-β-D-glucuron ide(MUG)
BS ISO 11866-2:2005 BS ISO 11866-2:2005. Milk and milk products. Enumeration of presumptive Escherichia coli. Colony-count technique at 44°C using membranes
05/30139998 DC 05/30139998 DC. ISO 7176-19. Wheelchairs. Part 19. Wheeled mobility devices for use as seats in motor vehicles
BS ISO 16014-1:2003 BS ISO 16014-1:2003. Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. General principles
PD CEN/TR 15350:2006 PD CEN/TR 15350:2006. Mechanical vibration. Guideline for the assessment of exposure to hand-transmitted vibration using available information including that provided by manufactu
BS ISO 5518:2007 BS ISO 5518:2007. Fruits, vegetables and derived products. Determination of benzoic acid content. Spectrophotometric method
BS EN 648:2006 BS EN 648:2006. Paper and board intended to come into contact with foodstuffs. Determination of the fastness of fluorescent whitened paper and board
BIP 0023:2005 BIP 0023:2005. Proteus compliance consultant
BS ISO 19813:2006 BS ISO 19813:2006. Road vehicles. Ignition systems. Test methods and requirements for high voltage boots on plug-top coils and pencil coils
DD IEC/PAS 62437:2005 DD IEC/PAS 62437:2005. Radio disturbance characteristics for the protection of receivers used on board vehicles, boats, and on devices. Limits and methods of measurement. Specifi
BS EN 61937-8:2007 BS EN 61937-8:2007. Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958. Non-linear PCM bitstreams according to the Windows Media Audio (WMA) Pro
BS EN 60958-3:2006 BS EN 60958-3:2006. Digital audio interface. Consumer applications
BS EN 1993-1-12:2007 BS EN 1993-1-12:2007. Eurocode 3. Design of steel structures. Additional rules for the extension of EN 1993 up to steel grades S 700
BS EN 50083-2:2006 BS EN 50083-2:2006. Cable networks for television signals, sound signals and interactive services. Electromagnetic compatibility for equipment
BS 8481:2006 BS 8481:2006. Design, preparation and application of internal gypsum, cement, cement and lime plastering systems. Specification
WD/ISO/IWA4 : 2005 WD/ISO/IWA4 : 2005 . ISO/IWA4 : 2005 Quality management systems. Guidelines for the application of ISO9001 : 2000 in local goventment
BS ISO 212:2007 BS ISO 212:2007. Essential oils. Sampling
BS EN 62337:2007 BS EN 62337:2007. Commissioning of electrical, instrumentation and control systems in the process industry. Specific phases and milestones
BS EN 62381:2007 BS EN 62381:2007. Automation systems in the process industry. Factory acceptance test (FAT), site acceptance test (SAT), and site integration test (SIT)
BS EN 62382:2007 BS EN 62382:2007. Electrical and instrumentation loop check
BS 5306-1:2006 BS 5306-1:2006. Code of practice for fire extinguishing installations and equipment on premises. Hose reels and foam inlets
05/30140402 DC 05/30140402 DC. ISO/IEC 8802-11 AMD 7. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirements.
BS EN 15341:2007 BS EN 15341:2007. Maintenance. Maintenance key performance indicators
BS EN 60335-2-13:2003+A2:2008 BS EN 60335-2-13:2003+A2:2008. Household and similar electrical appliances. Safety. Particular requirements for deep fat fryers, frying pans and similar appliances
BS EN 60335-2-74:2003 BS EN 60335-2-74:2003. Household and similar electrical appliances. Safety. Particular requirements for portable immersion heaters
BS EN 60335-2-81:2003 BS EN 60335-2-81:2003. Household and similar electrical appliances. Safety. Particular requirements for foot warmers and heating mats
05/30140438 DC 05/30140438 DC. IEC 60335-2-27 AMD 2. Household and similar electrical appliances. Safety. Part 2-27. Particular requirements for appliances for skin exposure to ultraviolet and infrare
BS 8480:2006 BS 8480:2006. Medical devices. Chairs with electrically operated support surfaces. Requirements
BIP 3058:2005 BIP 3058:2005. The power of process auditing - DVD & CD
05/30140483 DC 05/30140483 DC. IEC 61298-1 ED 2. Process measurement and control. General methods and procedures for evaluating performance. Part 1. General considerations
05/30140487 DC 05/30140487 DC. IEC 61298-2 ED 2. Process measurement and control. General methods and procedures for evaluating performance. Part 2. Tests reference conditions
05/30140491 DC 05/30140491 DC. IEC 61298-3 ED 2. Process measurement and control. General methods and procedures for evaluating performance. Part 3. Tests for the effects of influence quantities
05/30140495 DC 05/30140495 DC. IEC 61298-4 ED 2. Process measurement and control. General methods and procedures for evaluating performance. Part 4. Evaluation report content
06/30140504 DC 06/30140504 DC. IEC 61156-8. Multicore and symmetrical pair/quad Cables for digital communications. Part 8. Symmetrical pair/quad cables with transmission characteristics up to 1200 MHz
BS EN 14534:2003 BS EN 14534:2003. Postal services. Quality of service. Measurement of the transit time of end-to-end services for bulk mail
PD EN 14035-21:2005 PD EN 14035-21:2005. Fireworks. Jumping ground spinners. Specification and test methods
BS EN 14035-25:2005 BS EN 14035-25:2005. Fireworks. Party poppers. Specification and test methods
PD EN 14035-33:2006 PD EN 14035-33:2006. Fireworks. Spinners. Specification and test methods
KIT 179 KIT 179. Sampling kit
05/30140616 DC 05/30140616 DC. BS EN 15366. Winter and road service area maintenance equipment. Solid absorbents intended for road usage
BS EN 2588:2006 BS EN 2588:2006. Aerospace series. Bearings, spherical plain in corrosion resisting steel with assembly slots. Dimensions and loads
05/30140648 DC 05/30140648 DC. ISO 8437. Snowthrowers. Safety requirements and test procedures
BS ISO 6534:2007 BS ISO 6534:2007. Forestry machinery. Portable chain-saw hand-guards. Mechanical strength
BS EN 2549:2006 BS EN 2549:2006. Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium, anodized, MoS2 lubricated. Classification: 1100 MPa (at ambien
BS EN 2889:2006 BS EN 2889:2006. Aerospace series. Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification: 900 MPa (at ambient t
KIT 20 KIT 20. Information security standards kit
BS 5N 100-5:2006 BS 5N 100-5:2006. Aircraft oxygen systems and equipment. Guide to fire and explosion hazards associated with oxygen, including handling, storage and replenishment
BS EN 416-2:2006 BS EN 416-2:2006. Single burner gas-fired overhead radiant tube heaters for non-domestic use. Rational use of energy
BS EN 2680:2006 BS EN 2680:2006. Aerospace series. Nuts, anchor, self-locking, floating, self-aligning, two lug, in alloy steel, cadmium plated, MoS2 lubricated. Classification: 900 MPa (at ambient te
BS 594-1:2005 BS 594-1:2005. Hot rolled asphalt for roads and other paved areas. Specification for constituent materials and asphalt mixtures
BS ISO 5389:2005 BS ISO 5389:2005. Turbocompressors. Performance test code
06/30140751 DC 06/30140751 DC. ISO 17052. Rubber, raw. Determination of residual monomers and other volatile low-molecular-mass compounds by capillary gas chromatography. Thermal desorption (dynamic h
BS EN 1991-4:2006 BS EN 1991-4:2006. Eurocode 1. Actions on structures. Silos and tanks
BS EN 3475-302:2006 BS EN 3475-302:2006. Aerospace series. Cable, electrical, aircraft use. Test methods. Voltage proof test
BS EN 419-2:2006 BS EN 419-2:2006. Non-domestic gas-fired overhead luminous radiant heaters. Rational use of energy
BS EN 3820:2006 BS EN 3820:2006. Aerospace series. Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated. Classification: 1100 MP
BS EN 4172:2006 BS EN 4172:2006. Aerospace series. Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series. Classification: 1 100 MPa (at ambient t
05/30140851 DC 05/30140851 DC. IEC 61196-1-212. Coaxial communication cables. Environmental test methods. Part 1-212. UV resistance
05/30140853 DC 05/30140853 DC. IEC 61196-1-205. Coaxial communication cables. Environmental test methods. Part 1-205. Resistance to solvents and contaminating fluids
05/30140855 DC 05/30140855 DC. IEC 61196-1-313. Coaxial communication cables. Mechanical test methods. Part 1-313. Adhesion of dielectric and sheath
BS EN 4173:2006 BS EN 4173:2006. Aerospace series. Lockbolts, 100 countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series. Classification: 1100 MPa (a
BS EN 4174:2006 BS EN 4174:2006. Aerospace series. Collars, swage locking, sheartype, in aluminium alloy 2024, anodized or chromated, metric series
BS ISO 15031-5:2006 BS ISO 15031-5:2006. Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics. Emissions-related diagnostic services
BS EN 4312:2006 BS EN 4312:2006. Aerospace series. Studs, coarse tolerance reduced shank, medium length thread, in heat and corrosion resisting steel, with aluminium pigmented coating. Classification:
BS ISO 7839:2005 BS ISO 7839:2005. Textile machinery and accessories. Knitting machines. Vocabulary andclas sification
BS ISO 21482:2007 BS ISO 21482:2007. Ionizing-radiation warning. Supplementary symbol
BS ISO 9874:2006 BS ISO 9874:2006. Milk. Determination of total phosphorus content. Method using molecular absorption spectrometry
BS EN 15361:2007 BS EN 15361:2007. Determination of the influence of the corrosion protection coating on the anchorage capacity of the transverse anchorage bars in prefabricated reinforced components
ISO10972-5 : 2006 EDTN1 ISO10972-5 : 2006 EDTN1. ISO 10972-5 Cranes - Requirements for mechanisms -. Part 5: Bridge and gantry cranes
KIT 180 KIT 180. Asphalt/macadam for roads and other paved areas
ISO/IECTR22767 : 2005 EDTN 1 ISO/IECTR22767 : 2005 EDTN 1. ISO/IECTR22767 : 2005 Information technology - Telecommunications and information exchange between systems - Using CSTA for SIP phone user ag
DD CEN/TS 15359:2006 DD CEN/TS 15359:2006. Solid recovered fuels. Specifications and classes
05/30141026 DC 05/30141026 DC. ISO 17123-8. Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. Part 8. GNSS field measurement systems in real-time kinemat
05/30141031 DC 05/30141031 DC. IEC 62446. Grid connected photovoltaic systems. Minimum system documentation, commissioning tests and inspection
BS ISO 15906:2007 BS ISO 15906:2007. Carbonaceous materials for the production of aluminium. Baked anodes. Determination of the air permeability
05/30141093 DC 05/30141093 DC. EN 4620. Aerospace series. Inserts, MJ threads, self-locking, with self-broaching keys. Design standard
05/30141096 DC 05/30141096 DC. BS EN 4622. Aerospace series. Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting steel FE-PA2601 (A286), MoS2 coated
05/30141100 DC 05/30141100 DC. EN 4622. Aerospace series. Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting steel FE-PA2601 (A286), MoS2
05/30141104 DC 05/30141104 DC. BS EN 4623. Aerospace series. Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting nickel base alloy Ni-P100HT (Inconel 718), silver plating
05/30141105 DC 05/30141105 DC. EN 4624. Aerospace series. Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting nickel base alloy Ni-P101HT (WASPALOY), silver plating
ISO/TR20514 : 2005 EDTN1 ISO/TR20514 : 2005 EDTN1. ISO/TR20514 : 2005 Health informatics - Electronic health record - Definition, scope and context
ISO15745-5 : 2007 EDTN1 ISO15745-5 : 2007 EDTN1. ISO15745-5 : 2007 Industrial automation systems and integration - Open systems application integration framework - . Part 5 : Reference description for
BS ISO 10791-10:2007 BS ISO 10791-10:2007. Test conditions for machining centres. Evaluation of thermal distortions
PD 6687:2006 PD 6687:2006. Background paper to the UK National Annexes to BS EN 1992-1
ISO10303-111 : 2007 EDTN1 ISO10303-111 : 2007 EDTN1. ISO 10303-111 Industrial automation systems and integration - Product data representation and exchange . Part 111: Integrated application resource:
ISO10303-112 : 2006 EDTN 1 ISO10303-112 : 2006 EDTN 1. Industrial automation systems and integration - Product data representation and exchange -. Part 112: Integrated application resource: Modelling
BS EN 14390:2007 BS EN 14390:2007. Fire test. Large-scale room reference test for surface products
05/30141195 DC 05/30141195 DC. IEC 60076-15. Power transformers. Part 15. Gas-filled type power transformers
BS 4987-1:2005 BS 4987-1:2005. Coated macadam (asphalt concrete) for roads and other paved areas. Specification for constituent materials and for mixtures
BS ISO/IEC 26300:2006 BS ISO/IEC 26300:2006. Information technology. Open document format for office applications (OpenDocument) v1.0
BS EN ISO 15996:2005+A1:2007 BS EN ISO 15996:2005+A1:2007. Gas cylinders. Residual pressure valves. General requirements and type testing
BS EN 2647:2006 BS EN 2647:2006. Aerospace series. Nuts, hexagonal, self-locking, ball seat, in alloy steel, cadmium plated, MoS2 lubricated. Classification: 900 MPa (at ambient temperature) / 235°C
05/30141254 DC 05/30141254 DC. IEC 60335-2-106 AMD 1. Household and similar electrical appliances. Safety. Part 2-106. Particular requirements for heated carpets and heating units for room heating ins
BS EN 60335-2-53:2003 BS EN 60335-2-53:2003. Household and similar electrical appliances. Safety. Particular requirements for sauna heating appliances
BS EN 60335-2-54:2003 BS EN 60335-2-54:2003. Household and similar electrical appliances. Safety. Particular requirements for surface-cleaning appliances for household use employing liquids or steam
BS EN 646:2006 BS EN 646:2006. Paper and board intended to come into contact with foodstuffs. Determination of colour fastness of dyed paper and board
BS EN ISO 8895:2006 BS EN ISO 8895:2006. Shaped insulating refractory products. Determination of cold crushing strength
BS EN 74-1:2005 BS EN 74-1:2005. Couplers, spigot pins and baseplates for use in falsework and scaffolds. Couplers for tubes. Requirements and test procedures
05/30141329 DC 05/30141329 DC. EN 15383. Plastics piping systems for drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP). Manholes and inspection chamber
BS EN 517:2006 BS EN 517:2006. Prefabricated accessories for roofing. Roof safety hooks
BS ISO 35:2004 BS ISO 35:2004. Natural rubber latex concentrate. Determination of mechanical stability
BS ISO 21459:2006 BS ISO 21459:2006. Space data and information transfer systems. Proximity-1 space link protocol. Coding and synchronization sublayer
05/30141435 DC 05/30141435 DC. EN 61008-1. Residual current operated circuit-breakers without intergral overcurrent protection for household and similar uses (RCCB's). Part 1. General rules
05/30141456 DC 05/30141456 DC. ISO 16368. Mobile elevating work platforms. Design, calculations, safety requirements and test methods
ISO15500-20 : 2007 EDTN1 ISO15500-20 : 2007 EDTN1. ISO15500-20 : 2007 Road vehicles - Compressed natural gas (CNG) fuel system components -. Part 20: Rigid fuel line in material other than stainless s
BS ISO 21460:2006 BS ISO 21460:2006. Space data and information transfer systems. Proximity-1 space link protocol. Physical layer
DD CEN/TR 10347:2006 DD CEN/TR 10347:2006. Guidance for forming of structural steels in processing
BS EN 1507:2006 BS EN 1507:2006. Ventilation for buildings. Sheet metal air ducts with rectangular section. Requirements for strength and leakage
BS ISO/IEC 7501-1:2005 BS ISO/IEC 7501-1:2005. Identification cards. Machine readable travel documents. Machine readable passport
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
