BIS Standards Catalogue
BS 4841-1:2006 BS 4841-1:2006. Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications. Specification for laminated insulation boards with auto-adhesively or sep
BS 4841-2:2006 BS 4841-2:2006. Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications. Specification for laminated boards with auto-adhesively bonded facings fo
BS 4841-3:2006 BS 4841-3:2006. Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications. Specification for laminated boards (roofboards) with auto-adhesively or s
PD CEN/TR 15349:2006 PD CEN/TR 15349:2006. Hardware for furniture. Terms for extension elements and their components
BS ISO 16220:2005 BS ISO 16220:2005. Magnesium and magnesium alloys. Magnesium alloy ingots and castings
ERROR ERROR. BSISO/IEC1539-1 : 2004 CORR1 Information technology. Programming languages. Fortran. Part 1: Base Language
BS ISO 3116:2007 BS ISO 3116:2007. Magnesium and magnesium alloys. Wrought magnesium alloys
06/30146812 DC 06/30146812 DC. ISO 18436-6. Condition monitoring and diagnostics of machines. Requirements for training and certification of personnel. Part 6. Acoustic emission
BS EN 62132-5:2006 BS EN 62132-5:2006. Integrated circuits. Measurement of electromagnetic immunity, 150 kHz to 1 GHz. Workbench Faraday cage method
BS EN ISO 14880-3:2006 BS EN ISO 14880-3:2006. Optics and photonics. Microlens arrays. Test methods for optical properties other than wavefront aberrations
BS EN ISO 14880-4:2006 BS EN ISO 14880-4:2006. Optics and photonics. Microlens arrays. Test methods for geometrical properties
06/30146860 DC 06/30146860 DC. IEC 60191-2. Proposed new package outline. Small outline package (SOT) 3 -, 5- and 6-Lead SMD (to be published as 182E outline)
BS ISO 5794-1:2005 BS ISO 5794-1:2005. Rubber compounding ingredients. Silica, precipitated, hydrated. Non-rubber tests
BS EN 2882:2006 BS EN 2882:2006. Aerospace series. Nuts, hexagonal, self-locking, with counterbore and captive washer, in steel, cadmium plated, MoS2 lubricated. Classification: 1100 MPa (at ambient t
BS EN 3426:2006 BS EN 3426:2006. Aerospace series. Groove dimensions for axial mounting external type retaining rings
BS EN 3425:2006 BS EN 3425:2006. Aerospace series. Groove dimensions for axial mounting internal type retaining rings
06/30146908 DC 06/30146908 DC. CENELEC HD 603 S1 AMD 3. Distribution cables of rated Voltage 0,6-1kv
BS EN ISO 835:2007 BS EN ISO 835:2007. Laboratory glassware. Graduated pipettes
06/30146974 DC 06/30146974 DC. IEC 61000-3-2 AMD 1. Electromagnetic compatibility (EMC). Part 3-2. Limits. Limits for harmonic current emissions (equipment input current ? 16A per phase)
BS EN 3444:2006 BS EN 3444:2006. Aerospace series. Bolt, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated. Classification: 12
06/30146993 DC 06/30146993 DC. IEC 61097-3. Global maritime distress and safety system (GMDSS). Part 3. Digital selective calling (DSC) equipment. Operational and performance requirements, methods of
BS EN 934-6:2001 BS EN 934-6:2001. Admixtures for concrete, mortar and grout. Sampling, conformity control and evaluation of conformity
BIP 0026:2006 BIP 0026:2006. Complete ISMS BS ISO/IEC 27001 documentation toolkit CD-ROM. Including The Manager's guide to data security and BS 7779/ISO 17799.
06/30147040 DC 06/30147040 DC. ISO 10303-28. Industrial automation systems and integration. #Product data representation and exchange. Part 28. Implementation methods. XML representations of express s
CWA 15515:2006 CWA 15515:2006. European ICT skills meta-framework. State-of-the-art review, clarification of the realities, and recommendations for next steps
BS EN 13146-4:2002 BS EN 13146-4:2002. Railway applications. Track. Test methods for fastening systems. Effect of repeated loading
BS EN 13146-8:2002 BS EN 13146-8:2002. Railway applications. Track. Test methods for fastening systems. In service testing
ISO8362-7 : 2006 EDTN2 ISO8362-7 : 2006 EDTN2. ISO8362-7 : 2006 Injection containers and accessories. Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part
PD 6691:2007 PD 6691:2007. Guidance on the use of BS EN 13108 Bituminous mixtures. Material specifications
PD 6692:2006 PD 6692:2006. Asphalt. Guidance on the use of BS EN 12697 "Bituminous mixtures. Test methods for hot mix asphalt"
BS EN 60335-2-60:2003 BS EN 60335-2-60:2003. Specification for safety of household and similar electrical appliances. Particular requirements for whirlpool baths and whirlpool spas
BS EN 60870-5-104:2006 BS EN 60870-5-104:2006. Telecontrol equipment and systems. Transmission protocols. Network access for IEC 60870-5-101 using standard transport profiles
06/30147118 DC 06/30147118 DC. IEC 61020-1. Electromechanical switches for use in electrical and electronic equipment. Part 1. Generic specification
06/30147121 DC 06/30147121 DC. IEC 61300-3-38. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-38. Measurement techniques for determination of
KIT 189 KIT 189. BS 6465 sanitary installations kit
06/30147135 DC 06/30147135 DC. HD 638 S2 AMD 1. Road traffic signal systems
06/30147138 DC 06/30147138 DC. IEC PAS 61076-3-11X. Connectors for use in d.c., low-frequency analogueand digital high-speed data applications. Part 3-11X. Rectangular connectors. Protective housings
KIT188 - BSEN1991-1-2 : 2002 & NA KIT188 - BSEN1991-1-2 : 2002 & NA. KIT TO BSEN1991-1-2 : 2002 & NATIONAL ANNEX
BS EN 50342:2001 BS EN 50342:2001. Lead-acid starter batteries. General requirements, methods of test and numbering
06/30147145 DC 06/30147145 DC. EN 1570. Safety requirements for lifting tables
PD CEN/TR 15419:2006 PD CEN/TR 15419:2006. Protective clothing. Guidelines for selection, use, care and maintenance of chemical protective clothing
PD CEN/TR 15449:2006 PD CEN/TR 15449:2006. Geographic information. Standards, specifications, technical reports and guidelines, required to implement spatial data infrastructure
BS EN 3475-501:2006 BS EN 3475-501:2006. Aerospace series. Cables, electrical, aircraft use. Test methods. Dynamic cut-through
PD CLC/TR 50451:2007 PD CLC/TR 50451:2007. Railway applications. Systematic allocation of safety integrity requirements
PD CLC/TR 50452:2007 PD CLC/TR 50452:2007. Railway applications. Radio remote control system of traction vehicle for freight traffic in multiple traction operation
06/30147250 DC 06/30147250 DC. EN ISO 3741. Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Precision methods for reverberation test rooms
BS EN 4036:2006 BS EN 4036:2006. Aerospace series. Rod ends, adjustable with self-aligning double row ball bearing and threaded shank in corrosion resisting steel, reduced internal radial clearance. D
BS EN 4040:2006 BS EN 4040:2006. Aerospace series. Bearings, spherical plain in corrosion resisting steel with self-lubricating liner with wide inner ring. Elevated loads at ambient temperature. Dimen
BS EN 4035:2006 BS EN 4035:2006. Aerospace series. Rod ends, adjustable with self-aligning double row ball bearing in corrosion resisting steel, reduced internal radial clearance and threaded shank in
BS ISO/IEC 19795-1:2006 BS ISO/IEC 19795-1:2006. Information technology. Biometric performance testing and reporting. Principles and framework
BS EN 50290-2-23:2002 BS EN 50290-2-23:2002. Communication cables. Common design rules and construction. PE insulation
BS EN 3661-006:2006 BS EN 3661-006:2006. Aerospace series. Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A. With polarized signal contact. Bus bar version. Product s
06/30147288 DC 06/30147288 DC. EN ISO 6326-1. Natural gas. Determination of sulfur compounds. Part 1. General introduction
06/30147304 DC 06/30147304 DC. ISO 10928. Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Methods for regression analysis and their use
BS EN 50124-1:2001 BS EN 50124-1:2001. Railway applications. Insulation coordination. Basic requirements. Clearances and creepage distances for all electrical and electronic equipment
BS EN 14362-1:2003 BS EN 14362-1:2003. Textiles. Methods for the determination of certain aromatic amines derived from azo colorants. Detection of the use of certain azo colorants accessible without e
BS ISO 8820-6:2007 BS ISO 8820-6:2007. Road vehicles. Fuse-links. Single-bolt fuse-links
BS ISO 7634:2003 BS ISO 7634:2003. Road vehicles. Compressed-air braking systems. Test procedures
BS ISO 7240-15:2004 BS ISO 7240-15:2004. Fire detection and alarm systems. Point type fire detectors using scattered light, transmitted light or ionization sensors in combination with a heat sensor
06/30147340 DC 06/30147340 DC. EN 50397-2. Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV a.c. and not exceeding 36 kV a.c. Part 2. Accessories for cov
06/30147378 DC 06/30147378 DC. EN 15467. Food processing machinery. Fish heading and filleting machines. Safety and hygiene requirements
BS EN 12864:2001 BS EN 12864:2001. Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or equal to 200 mbar, with a capacity of less than or equa l to 4kg/h, and thei
BS ISO 18115:2001+A2:2007 BS ISO 18115:2001+A2:2007. Surface chemical analysis. Vocabulary
ISO/IEC23003-1 : 2007 EDTN1 ISO/IEC23003-1 : 2007 EDTN1. ISO/IEC 23003-1 Information technology - MPEG audio technologies -. Part 1: MPEG Surround
BS ISO/IEC 18000-6:2004 BS ISO/IEC 18000-6:2004. Information technology. Radio frequency identification for item management. Parameters for air interface communications at 860 MHz to 960 MHz
BS EN 10217-1:2002 BS EN 10217-1:2002. Welded steel tubes for pressure purposes. Technical delivery conditions. Non-alloy steel tubes with specified room temperature properties
PD CEN/TR 14585-2:2006 PD CEN/TR 14585-2:2006. Corrugated metal hose assemblies for pressure applications. Guidance on the use of conformity assessment procedures
BS ISO 19013-2:2005 BS ISO 19013-2:2005. Rubber hoses and tubing for fuel circuits for internal combustion engines. Specification. Gasoline fuels
BS EN 13171:2001 BS EN 13171:2001. Thermal insulation products for buildings. Factory made wood fibre (WF) products. Specification
BS EN 10217-3:2002 BS EN 10217-3:2002. Welded steel tubes for pressure purposes. Technical delivery conditions. Alloy fine grain steel tubes
BS EN 10312:2002 BS EN 10312:2002. Welded stainless steel tubes for the conveyance of aqueous liquids inclu ding water for human consumption. Technical delivery conditions
BS ISO 4000-2:2007 BS ISO 4000-2:2007. Passenger car tyres and rims. Rims
BS EN ISO 21572:2004 BS EN ISO 21572:2004. Foodstuffs. Methods for the detection of genetically modified organisms and derived products. Protein based methods
PAS 43:2006 PAS 43:2006. Safe working of vehicle breakdown, recovery and removal operations. Management system specification
BS EN 12111:2002 BS EN 12111:2002. Tunnelling machines. Road headers, continuous miners and impact rippers. Safety requirements
BS ISO 2575:2004 BS ISO 2575:2004. Road vehicles. Symbols for controls, indicators and tell-tales
BS ISO 11783-6:2004 BS ISO 11783-6:2004. Tractors and machinery for agriculture and forestry. Serial control and communications data network. Virtual terminal
BS EN 14362-2:2003 BS EN 14362-2:2003. Textiles. Methods for the determination of certain aromatic amines deriv ed from azo colorants. Detection of the use of certain azo colorants accessible by extra
BS EN 60034-9:2005 BS EN 60034-9:2005. Rotating electrical machines. Noise limits
06/30147660 DC 06/30147660 DC. IEC 60050-581. International electrotechnical vocabulary. Part 581. Electromechanical components for electronic equipment
BS EN 1968:2002 BS EN 1968:2002. Transportable gas cylinders. Periodic inspection and testing of seamless steel gas cylinders
BS EN 1995-1-1:2004+A1:2008 BS EN 1995-1-1:2004+A1:2008. Eurocode 5. Design of timber structures. General. Common rules and rules for buildings
06/30147694 DC 06/30147694 DC. CENELEC HD 603 S1 AMD. Distribution cables of rated voltage 0,6-1kV
06/30147703 DC 06/30147703 DC. ISO 16730. Fire safety engineering. Assessment, verification and validation of calculation methods
PD IEC/TR 61430:1997 PD IEC/TR 61430:1997. Secondary cells and batteries. Test methods for checking the performance of devices designed for reducing explosion hazards. Lead-acid starter batteries
06/30147727 DC 06/30147727 DC. ISO/IEC 26926. C++/CLI language specification
BS EN 14730-2:2006 BS EN 14730-2:2006. Railway applications. Track. Aluminothermic welding of rails. Qualifications of aluminothermic welders, approval of contractors and acceptance of welds
BS EN 13167:2001 BS EN 13167:2001. Thermal insulation products for buildings. Factory made cellular glass (CG) products. Specification
BS ISO 14686:2003 BS ISO 14686:2003. Hydrometric determinations. Pumping tests for water wells. Considerations and guidelines for design, performance and use
BS 434-2:2006 BS 434-2:2006. Bitumen road emulsions. Code of practice for the use of cationic bitumen emulsions on roads and other paved areas
06/30147760 DC 06/30147760 DC. ISO 3691-3. Industrial trucks. Safety requirements and verification. Part 3. Additional requirements for trucks with elevating operator position and trucks specifically
06/30147762 DC 06/30147762 DC. ISO 3691-4. Industrial trucks. Safety requirements and verification. Part 4. Driverless industrial trucks and their systems
06/30147763 DC 06/30147763 DC. IEC 61643-21 AMD 1. Low voltage surge protective devices. Part 21. Surge protective devices connected to telecommunications and signalling networks. Performance requirem
BS 8415:2005+A1:2009 BS 8415:2005+A1:2009. Monuments within burial grounds and memorial sites. Specification
BS ISO 14531-3:2006 BS ISO 14531-3:2006. Plastics pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels. Metric series. Specifications. Fittings for mech
BS ISO 14531-2:2004 BS ISO 14531-2:2004. Plastics pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels. Metric series. Specifications. Fittings for heat
BS EN ISO 7391-1:2006 BS EN ISO 7391-1:2006. Plastics. Polycarbonate (PC) moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 7391-2:2006 BS EN ISO 7391-2:2006. Plastics. Polycarbonate (PC) moulding and extrusion materials. Preparation of test specimens and determination of properties
CWA 15517:2006 CWA 15517:2006. European handbook for defence procurement
BS EN ISO 6644:2007 BS EN ISO 6644:2007. Flowing cereals and milled cereal products. Automatic sampling by mechanical means
BS EN ISO 17353:2005 BS EN ISO 17353:2005. Water quality. Determination of selected organotin compounds. Gas chromatographic method
BS EN 14035-15:2003 BS EN 14035-15:2003. Fireworks. Fountains. Specification and test methods
BS EN 2713-004:2006 BS EN 2713-004:2006. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 200°C. Screened (braided) and jacketed
BS EN 2713-006:2006 BS EN 2713-006:2006. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 200°C. Screened (braided) and jacketed
BS EN 2713-008:2006 BS EN 2713-008:2006. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 200°. Screened (braided) and jacketed,
BS EN 2713-010:2006 BS EN 2713-010:2006. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 200°C. Screened (braided) and jacketed
BS EN 2714-004:2006 BS EN 2714-004:2006. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 260°C. Screened (braided) and jacketed
BS EN 2714-006:2006 BS EN 2714-006:2006. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 260°C. Screened (braided) and jacketed
BS EN 2714-008:2006 BS EN 2714-008:2006. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 260°C. Screened (braided) and jacketed
BS EN 2714-010:2006 BS EN 2714-010:2006. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 260°C. Screened (braided) and jacketed
PD ISO/TR 27628:2007 PD ISO/TR 27628:2007. Workplace atmospheres. Ultrafine, nanoparticle and nano-structured aerosols. Inhalation exposure characterization and assessment
BS EN 3733-008:2006 BS EN 3733-008:2006. Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150°C continuous . Plug sub-assembly
BS EN 3733-009:2006 BS EN 3733-009:2006. Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150°C continuous. Receptacle sub-asse
BS EN 2349-201:2006 BS EN 2349-201:2006. Aerospace series. Requirements and test procedures for relays and contactors. Visual inspection
BS EN 2349-202:2006 BS EN 2349-202:2006. Aerospace series. Requirements and test procedures for relays and contactors. Examination of dimensions and mass
BS EN 2349-301:2006 BS EN 2349-301:2006. Aerospace series. Requirements and test procedures for relays and contactors. Pick up and drop out voltage
BS EN 2349-302:2006 BS EN 2349-302:2006. Aerospace series. Requirements and test procedures for relays and contactors. Insulation resistance
BS EN 2349-303:2006 BS EN 2349-303:2006. Aerospace series. Requirements and test procedures for relays and contactors. Dielectric strength
BS EN 2349-304:2006 BS EN 2349-304:2006. Aerospace series. Requirements and test procedures for relays and contactors. Operate and release time
BS EN 2349-306:2006 BS EN 2349-306:2006. Aerospace series. Requirements and test procedures for relays and contactors. Overload d.c and a.c.
BS EN 2349-307:2006 BS EN 2349-307:2006. Aerospace series. Requirements and test procedures for relays and contactors. Contact voltage drop
BS EN 2349-308:2006 BS EN 2349-308:2006. Aerospace series. Requirements and test procedures for relays and contactors. Coil current
BS EN 2349-310:2006 BS EN 2349-310:2006. Aerospace series. Requirements and test procedures for relays and contactors. Rupture
BS EN 2349-312:2006 BS EN 2349-312:2006. Aerospace series. Requirements and test procedures for relays and contactors. Electrical service life. Mixed load
BS EN 2349-316:2006 BS EN 2349-316:2006. Aerospace series. Requirements and test procedures for relays and contactors. Mechanical life (endurance at reduced load)
BS EN 2349-317:2006 BS EN 2349-317:2006. Aerospace series. Requirements and test procedures for relays and contactors. Service life of coil switching device
BS EN 2349-318:2006 BS EN 2349-318:2006. Aerospace series. Requirements and test procedures for relays and contactors. Pick-up voltage at high temperature and drop-out voltage at low temperature
BS EN 2349-319:2006 BS EN 2349-319:2006. Aerospace series. Requirements and test procedures for relays and contactors. Miss test
DD CEN/TS 15480-1:2007 DD CEN/TS 15480-1:2007. Identification card systems. European Citizen Card. Physical, electrical and transport protocol characteristics
DD CEN/TS 15480-2:2007 DD CEN/TS 15480-2:2007. Identification card systems. European Citizen Card. Logical data structures and card services
BS ISO 5984:2002 BS ISO 5984:2002. Animal feeding stuffs. Determination of crude ash
BS EN 62086-1:2005, IEC 62086-1:2001 BS EN 62086-1:2005, IEC 62086-1:2001. Electrical apparatus for explosive gas atmospheres. Electrical resistance trace heating . General and testing requirements
06/30147903 DC 06/30147903 DC. ISO TS 22789. Health informatics. Conceptual framework for patient findings and problems in terminologies
BS EN 50379-2:2004 BS EN 50379-2:2004. Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances. Performance requirements for apparatus
BS ISO 5985:2002 BS ISO 5985:2002. Animal feeding stuffs. Determination of ash insoluble in hydrochloric acid
BS ISO 1832:2004 BS ISO 1832:2004. Indexable inserts for cutting tools. Designation
BS 6404-8.1:2001, IEC 60404-8-1:2001 BS 6404-8.1:2001, IEC 60404-8-1:2001. Magnetic materials. Individual materials. Magnetically hard materials
BS EN 13242:2002+A1:2007 BS EN 13242:2002+A1:2007. Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
BS EN ISO/IEC 15423:2005 BS EN ISO/IEC 15423:2005. Information technology. Automatic identification and data capture techniques. Bar code scanner and decoder performance testing
BS EN ISO 21187:2005 BS EN ISO 21187:2005. Milk. Quantitative determination of bacteriological quality. Guidance for establishing and verifying conversion relationship between routine method results a
BS EN 14035-27:2003 BS EN 14035-27:2003. Fireworks. Rockets. Specification and test methods
BS ISO 4309:2004+A1:2008 BS ISO 4309:2004+A1:2008. Cranes. Wire ropes. Care, maintenance, installation, examination and discard
BS EN 13060:2004 BS EN 13060:2004. Small steam sterilizers
BS EN 13162:2001 BS EN 13162:2001. Thermal insulation products for buildings. Factory made mineral wool (MW) products. Specification
PD EN 14035-4:2003 PD EN 14035-4:2003. Fireworks. Bangers and banger batteries. Specification and test methods
06/30147992 DC 06/30147992 DC. EN 15501. Thermal insulation products equipment and industrial installations. Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products. Specification
BS EN ISO/IEC 15415:2005 BS EN ISO/IEC 15415:2005. Information technology. Automatic identification and data capture techniques. Bar code print quality test specification. Two-dimensional symbols
BS EN 14035-34:2003 BS EN 14035-34:2003. Fireworks. Table bombs. Specification and test methods
WD/ISO14896 : 2006 EDTN2 WD/ISO14896 : 2006 EDTN2. ISO 14896 Plastics - Polyurethane raw materials - Determination of isocyanate content
BS EN 14035-23:2003 BS EN 14035-23:2003. Fireworks. Non-hand-held sparklers. Specification and test methods
BS EN 50065-2-3:2003 BS EN 50065-2-3:2003. Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 Khz. Immunity requirements for mains communications equipment and sy
06/30148023 DC 06/30148023 DC. IEC 61076-3-115. Connectors for electronic equipment. Part 3-115. Rectangular connectors. Protective housings for use with 8-way shielded connectors for frequencies up t
BS 8487:2007 BS 8487:2007. The design and construction of gas boosters used in association with combustion equipment. Specification
BS EN 336:2003 BS EN 336:2003. Structural timber. Sizes, permitted deviations
BS EN 14704-1:2005 BS EN 14704-1:2005. Determination of the elasticity of fabrics. Strip tests
BS EN 50379-1:2004 BS EN 50379-1:2004. Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances. General requirements and test methods
BS EN 13481-7:2003 BS EN 13481-7:2003. Raiway applications. Track. Performance requirements for fastening systems. Special fastening systems for switches and crossings and check rails
BS EN 13481-4:2002 BS EN 13481-4:2002. Railway applications. Track. Performance requirements for fastening systems. Fastening systems for steel sleepers
BS EN 13481-3:2002 BS EN 13481-3:2002. Railway applications. Track. Performance requirements for fastening systems. Fastening systems for wood sleepers
BS EN 13481-2:2002 BS EN 13481-2:2002. Railway applications. Track. Performance requirements for fastening systems. Fastening systems for concrete sleepers
BS EN 13481-1:2002 BS EN 13481-1:2002. Railway applications. Track. Performance requirements for fastening systems. Definitions
BS ISO 363-1:2006 BS ISO 363-1:2006. Textile machinery and accessories. Flat steel healds with closed end loops. Dimensions of healds manufactured of rolled steel wire
BS EN 3155-019:2005 BS EN 3155-019:2005. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, female, type A, crimp, class S. Product standard
BS EN 2349-402:2006 BS EN 2349-402:2006. Aerospace series. Requirements and test procedures for relays and contactors. Corrosion, salt spray
BS EN 2349-405:2006 BS EN 2349-405:2006. Aerospace series. Requirements and test procedures for relays and contactors. Fluid resistance
BS EN 2349-407:2006 BS EN 2349-407:2006. Aerospace Series. Requirements and test procedures for relays and contactors. Cold/low pressure and moist heat
06/30148133 DC 06/30148133 DC. EN 15503. Garden equipment. Garden blowers, vacuums and blower/vacuums. Safety
BS EN 13163:2001 BS EN 13163:2001. Thermal insulation products for buildings. Factory made products of expanded polystyrene. Specification
PD CEN/TR 15356-1:2006 PD CEN/TR 15356-1:2006. Validation and interpretation of analytical methods, migration testing and analytical data for materials and articles in contact with food. General consi
06/30148148 DC 06/30148148 DC. EN ISO 2577. Plastics. Thermosetting moulding materials. Determination of shrinkage
PD CLC/TR 50489:2006 PD CLC/TR 50489:2006. Smart tracker chips. Feasibility study on the inclusion of RFID in electrical and electronic equipment for WEEE management
06/30148173 DC 06/30148173 DC. ISO 9809-1. Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing. Part 1. Quenched and tempered steel cylinders with tensile strength
06/30148176 DC 06/30148176 DC. ISO 9809-2. Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing. Part 2. Quenched and tempered steel cylinders with tensile strength
06/30148179 DC 06/30148179 DC. ISO 9809-3. Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing. Part 3. Normalized steel cylinders
06/30148182 DC 06/30148182 DC. ISO 7866. Gas cylinders Refillable seamless aluminium alloy gas cylinders. Design, construction and testing
BS EN 13169:2001 BS EN 13169:2001. Thermal insulation products for buildings. Factory made products of expanded perlite (EPB). Specification
BS EN 50379-3:2004 BS EN 50379-3:2004. Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances. Performance requirements for apparatus
DD CEN/TS 15234:2006 DD CEN/TS 15234:2006. Solid biofuels. Fuel quality assurance
BS EN 13164:2001 BS EN 13164:2001. Thermal insulation products for buildings. Factory made products of extruded polystyrene foam (XPS). Specification
BS EN 4416:2006 BS EN 4416:2006. Aerospace series. Non-metallic materials. Textiles. Wide woven fabrics. Technical specification
BS EN 4415:2006 BS EN 4415:2006. Aerospace series. Non-metallic materials. Textiles. Narrow woven fabrics. Technical specification
BS EN 13236:2001 BS EN 13236:2001. Safety requirements for superabrasives
BS EN 12873-3:2006 BS EN 12873-3:2006. Influence of materials on water intended for human consumption. Influence due to migration. Test method for ion exchange and adsorbent resins
06/30148318 DC 06/30148318 DC. EN 15497. Finger jointed structural timber. Performance requirements and minimum production requirements
BS EN 14035-2:2003 BS EN 14035-2:2003. Fireworks. Categorisation
06/30148335 DC 06/30148335 DC. IEC CISPR 32. Electromagnetic compatibility (EMC). Multimedia equipment. Radio disturbance characteristics. Limits and methods of measurement
06/30148351 DC 06/30148351 DC. EN 12566-6. Small wastewater treatment systems for up to 50 PT. Part 6. Prefabricated treatment units for septic tank effluent
BS 4978:2007 BS 4978:2007. Visual strength grading of softwood. Specification
BS 5756:2007 BS 5756:2007. Visual grading of hardwood. Specification
BS EN 4424:2006 BS EN 4424:2006. Aerospace series. Rod-ends, adjustable single fork and threaded shank with engagement: 1,5 x thread diameter in titanium alloys. Dimensions and loads
BS EN 4198:2006 BS EN 4198:2006. Aerospace series. Rod-ends, adjustable self-aligning plain bearing with self-lubricating liner and threaded shank in corrosion resisting steel. Dimensions and loads
BIP 0005:2006 BIP 0005:2006. A Managers' guide to service management. 5th edition
06/30148402 DC 06/30148402 DC. IEC 61000-3-2 AMD 1. Electromagnetic compatability (EMC). Part 3-2. Limits. Limits for harmonics (equipment input current ≤ 16A per phase)
BIP 3024:2006 BIP 3024:2006. The UK Guide to standardization for overhead electrical lines CD-ROM
BS EN 3155-016:2006 BS EN 3155-016:2006. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, male, type A, crimp, class S. Product standard
BS EN 3545-008:2006 BS EN 3545-008:2006. Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55°C to 175°C.
BS EN 2997-001:2006 BS EN 2997-001:2006. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65°C to 175°C conti
BS EN 2997-002:2006 BS EN 2997-002:2006. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65°C to 175°C conti
BS EN 2997-003:2006 BS EN 2997-003:2006. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65°C to 175°C conti
BS EN 2997-004:2006 BS EN 2997-004:2006. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65°C to 175°C conti
BS EN 2997-005:2006 BS EN 2997-005:2006. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65°C to 175°C conti
BS EN 2997-006:2006 BS EN 2997-006:2006. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65°C to 175°C conti
BS EN 2997-007:2006 BS EN 2997-007:2006. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65°C to 175°C conti
BS EN 2997-008:2006 BS EN 2997-008:2006. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65°C to 175°C conti
BS EN 2997-009:2006 BS EN 2997-009:2006. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65°C to 175°C conti
BS EN 2997-010:2006 BS EN 2997-010:2006. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65°C to 175°C conti
BS EN 2997-011:2006 BS EN 2997-011:2006. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65°C to 175°C conti
ISO/IEC9594-1 : 2006 EDTN 5 ISO/IEC9594-1 : 2006 EDTN 5. Information technology. Open Systems Interconnection. The Directory -. Part 1: Overview of concepts, models and services
ISO/IEC9594-2 : 2005 EDTN5 ISO/IEC9594-2 : 2005 EDTN5. Information technology. Open Systems Interconnection. The Directory. Part 2: Models
ISO/IEC9594-3 : 2005 EDTN5 ISO/IEC9594-3 : 2005 EDTN5. Information technology. Open Systems Interconnection The Directory -. Part 3: Abstract service definition
ISO/IEC9594-4 : 2005 EDTN5 ISO/IEC9594-4 : 2005 EDTN5. Information technology. Open Systems Interconnection The Directory. Part 4: Procedures for distributed operation
ISO/IEC9594-5 : 2005 EDTN5 ISO/IEC9594-5 : 2005 EDTN5. ISO/IEC 9594-5 : 2005 Information technology - Open Systems Interconnection - The Directory -. Part 5: Protocol specifications
ISO/IEC9594-6 : 2005 EDTN5 ISO/IEC9594-6 : 2005 EDTN5. Information technology. Open Systems Interconnection. The Directory. Part 6: Selected attribute types
ISO/IEC9594-7 : 2006 EDTN 5 ISO/IEC9594-7 : 2006 EDTN 5. Information technology. Open Systems Interconnection The Directory. Part 7: Selected object classes
WD/ISO/IEC9594-9 : 2006 EDTN 4 WD/ISO/IEC9594-9 : 2006 EDTN 4. Information technology. Open Systems Interconnection. The Directory. Part 9: Replication
ISO/IEC9594-10 : 2005 EDTN3 ISO/IEC9594-10 : 2005 EDTN3. ISO/IEC9594-10 : 2006 Information technology - Open Systems Interconnection - The Directory -. Part 10: Use of systems management for administr
BS ISO 16609:2004 BS ISO 16609:2004. Banking. Requirements for message authentication using symmetric techniques
PD 6662:2004 PD 6662:2004. Scheme for the application of European Standards for intruder and hold-up alarm systems
BS EN ISO 15715:2006 BS EN ISO 15715:2006. Binders for paints and varnishes. Determination of turbidity
BS EN 14591-1:2004 BS EN 14591-1:2004. Explosion prevention and protection in underground mines. Protective systems. 2-bar explosion proof ventilation structure
BS EN 12229:2007 BS EN 12229:2007. Surfaces for sports areas. Procedure for the preparation of synthetic turf and needle-punch test pieces
BS EN 62282-2:2004 BS EN 62282-2:2004. Fuel cell technologies. Fuel cell modules
BS EN IS0 22825:2006 BS EN IS0 22825:2006. Non-destructive testing of welds. Ultrasonic testing. Testing of welds in austenitic steels and nickel-based alloys
BIP 2105:2006 BIP 2105:2006. Environmental Management Report : Focus on climate change
BS EN 60512-1-100:2006 BS EN 60512-1-100:2006. Connectors for electronic equipment. Test and measurements. General. Applicable publications
CWA 15526:2006 CWA 15526:2006. European network for administrative nomenclature
06/30148714 DC 06/30148714 DC. ISO 15115. Leather. Vocabulary
06/30148719 DC 06/30148719 DC. IEC 62026-2 ED.2. Low-voltage switchgear and controlgear. Controller-device interfaces (C DIs). Part 2. Actuator sensor interface (AS-i)
06/30148723 DC 06/30148723 DC. IEC 62026-3 ED. 2.0. Low-voltage switchgear and controlgear. Controller-device interfaces (C DIs). Part 3. DeviceNet
06/30148766 DC 06/30148766 DC. EN 10248-2. Hot-rolled steel sheet piling. Part 2. Tolerances on shape and dimensions
06/30148769 DC 06/30148769 DC. EN 10249-1. Cold formed steel sheet piling. Part 1. Technical delivery conditions
06/30148772 DC 06/30148772 DC. EN 10249-2. Cold formed steel sheet piling. Part 2. Tolerances on shape and dimensions
BIP 2107:2006 BIP 2107:2006. Auditing for the 21st century
BS EN ISO 13503-3:2005 BS EN ISO 13503-3:2005. Petroleum and natural gas industries. Completion fluids and materials. Testing of heavy brines
BS EN 55012:2002 BS EN 55012:2002. Vehicles, boats and internal combustion engine driven devices. Radio disturbance characteristics. Limits and methods of measurement for the protection of receivers e
BS EN ISO 16000-10:2006 BS EN ISO 16000-10:2006. Indoor air. Determination of the emission of volatile organic compounds from building products and furnishing. Emission test cell method
BS EN ISO 4625-1:2006 BS EN ISO 4625-1:2006. Binders for paint and varnishes. Determination of softening point. Ring-and-ball method
BS EN 14394:2005+A1:2008 BS EN 14394:2005+A1:2008. Heating boilers. Heating boilers with forced draught Burners. Nominal heat output not exceeding 10 MW and maximum operating temperature of 110°C
06/30148912 DC 06/30148912 DC. EN 50477. Assessment of the compliance of broadcast station transmitters with the reference levels or the basic restrictions related to public and occupational exposure
BS ISO/IEC 27006:2007 BS ISO/IEC 27006:2007. Information technology. Security techniques. Requirements for bodies providing audit and certification of information security management systems
BS EN 13135-2:2004 BS EN 13135-2:2004. Cranes. Equipment. Non-electrotechnical equipment
BS EN 998-1:2003 BS EN 998-1:2003. Specification for mortar for masonry. Rendering and plastering mortar
BS ISO/IEC 10118-3:2003 BS ISO/IEC 10118-3:2003. Information technology. Security techniques. Hash-functions. Dedicated hash-functions
BS EN ISO 15156-2:2003 BS EN ISO 15156-2:2003. Petroleum, petrochemical and natural gas industries. Materials for use in H2S-containing environments in oil and gas production. Cracking resistant carbo
BS EN ISO 15156-3:2003 BS EN ISO 15156-3:2003. Petroleum, petrochemical and natural gas industries. Materials for use in H2S-containing environments in oil and gas production. Cracking-resistant CRAs
BS EN ISO 17070:2006 BS EN ISO 17070:2006. Leather. Chemical tests. Determination of pentachlorophenol content
BS ISO 9852:2007 BS ISO 9852:2007. Unplasticized poly(vinyl chloride) (PVC-U) pipes. Dichloromethane resistance at specified temperature (DCMT). Test method
ISO/IEC14496-16 : 2006 EDTN2 ISO/IEC14496-16 : 2006 EDTN2. ISO/IEC14496-16 : 2006 Information technology - Coding of audio-visual objects. Part 16 : Animation Framework eXtension (AFX)
BS EN 12873-4:2006 BS EN 12873-4:2006. Influence of materials on water intended for human consumption. Influence due to migration. Test method for water treatment membranes
BS EN ISO 5943:2006 BS EN ISO 5943:2006. Cheese and processed cheese products. Determination of chloride content. Potentiometric titration method
BS EN 13725:2003 BS EN 13725:2003. Air quality. Determination of odour concentration by dynamic olfactometry
KIT 190 KIT 190. Achieving ISO/IEC 20000 series promotional kit
BS EN ISO 10405:2006 BS EN ISO 10405:2006. Petroleum and natural gas industries. Care and use of casing and tubing
BS EN ISO 10426-1:2006 BS EN ISO 10426-1:2006. Petroleum and natural gas industries. Cements and materials for well cementing. Specification
06/30149018 DC 06/30149018 DC. EN 15502-1. Gas-fired central heating boilers. Part 1: General requirements and tests
BS EN ISO 8502-11:2006, BS 7079-B11:2006 BS EN ISO 8502-11:2006, BS 7079-B11:2006. Preparation of steel substrates before application of paints and related products. Tests for the assessment of surfac
ISO518 : 2006 EDTN2 ISO518 : 2006 EDTN2. ISO518 : 2006 Photography - Camera accessory shoes, with and without electrical contacts, for photoflash lamps and electronic photoflash units - Specification
PD CEN/TR 15508:2006 PD CEN/TR 15508:2006. Key properties on solid recovered fuels to be used for establishing a classification system
BS ISO 17591:2002 BS ISO 17591:2002. Machinery for forestry. Knuckleboom log loaders. Identification, terminology, classification and component nomenclature
BS EN 13412:2006 BS EN 13412:2006. Products and systems for the protection and repair of concrete structures. Test methods. Determination of modulus of elasticity in compression
BS ISO 17268:2006 BS ISO 17268:2006. Compressed hydrogen surface vehicle refuelling connection devices
06/30149088 DC 06/30149088 DC. ISO 5630-6. Paper and board. Accelerated ageing. Part 6. Exposure to atmospheric pollution
BS EN 13835:2002 BS EN 13835:2002. Founding. Austenitic cast irons
BS EN 4425:2006 BS EN 4425:2006. Aerospace series. Washers, tab in corrosion resisting steel for flight control rods. Dimensions
BS EN 50182:2001 BS EN 50182:2001. Conductors for overhead lines. Round wire concentric lay stranded conductors
BS EN 1926:2006 BS EN 1926:2006. Natural stone test methods. Determination of uniaxial compressive strength
BS ISO 11460:2007 BS ISO 11460:2007. Two-wheeled motorcycles. Positioning of lighting and light-signalling devices
BS ISO 4000-1:2007 BS ISO 4000-1:2007. Passenger car tyres and rims. Tyres (metric series)
06/30149223 DC 06/30149223 DC. EN 10348. Steel for the reinforcement of concrete. Galvanized reinforcing steel
BS EN 12372:2006 BS EN 12372:2006. Natural stone test methods. Determination of flexural strength under concentrated load
BS EN 1936:2006 BS EN 1936:2006. Natural stone test methods. Determination of real density and apparent density, and of total and open porosity
06/30149243 DC 06/30149243 DC. EN 13001-2 AMD 1. Cranes. General design. Part 2. Load actions
BS ISO 15003:2006 BS ISO 15003:2006. Agricultural engineering. Electrical and electronic equipment. Testing resistance to environmental conditions
BS EN 14810:2006 BS EN 14810:2006. Surfaces for sports areas. Determination of spike resistance
BS EN 14904:2006 BS EN 14904:2006. Surfaces for sports areas. Indoor surfaces for multi-sports use. Specification
PD CISPR/TR 16-3:2003 PD CISPR/TR 16-3:2003. Specification for radio disturbance and immunity measuring apparatus and methods. CISPR technical reports
BS EN 14465:2003 BS EN 14465:2003. Textiles. Upholstery fabrics. Specification and methods of test
BS EN 12405-1:2005 BS EN 12405-1:2005. Gas meters. Conversion devices. Volume conversion
BS EN 15509:2007 BS EN 15509:2007. Road transport and traffic telematics. Electronic fee collection. Interoperability application profile for DSRC
06/30149421 DC 06/30149421 DC. IEC 60335-2-7 AMD 3. Household and similar electrical appliances. Safety. Particular requirements for washing machines
BIP 0015:2006 BIP 0015:2006. IT service management. Self assessment workbook. 2nd edition
06/30149441 DC 06/30149441 DC. ISO 8362-5. Injection containers and accessories. Part 5. Freeze drying closures for injection vials
BS EN 62132-4:2006 BS EN 62132-4:2006. Integrated circuits. Measurement of electromagnetic immunity. 150 kHz to 1 GHz. Direct RF power injection method
06/30149459 DC 06/30149459 DC. IEC 60331-13. Tests for electric cables under fire conditions. Circuit integrity. Part 13. Apparatus. Fire with shock at a temperature of at least 830°C for cables with
06/30149463 DC 06/30149463 DC. IEC 60331-32. Tests for electric cables under fire conditions. Circuit integrity. Part 32. Procedures and requirements for fire with shock. Cables of rated voltage up to
BS IEC 60880:2006 BS IEC 60880:2006. Nuclear power plants. Instrumentation and control systems important to safety. Software aspects for computer-based systems performing category A functions
06/30149539 DC 06/30149539 DC. IEC 61300-2-21. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-21. Tests. Composite temperature-humidity cycli
06/30149562 DC 06/30149562 DC. IEC 61083-2. Instruments and software used for measurements in high-voltage impulse test. Part 2. Requirements for software
BS ISO/IEC 1539-1:2004 BS ISO/IEC 1539-1:2004. Information technology. Programming languages. Fortran. Base language
BS EN 14358:2006 BS EN 14358:2006. Timber structures. Calculation of characteristic 5-percentile values and acceptance criteria for a sample
BS EN 383:2007 BS EN 383:2007. Timber structures. Test methods. Determination of embedment strength and foundation values for dowel type fasteners
BIP 2115:2006 BIP 2115:2006. Electrical maintenance
PD ISO/TR 11071-2:2006 PD ISO/TR 11071-2:2006. Comparison of worldwide lift safety standards. Hydraulic lifts (elevators)
BS EN 3155-030:2006 BS EN 3155-030:2006. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, coaxial, shielded, size 12, male, type D, crimp, class R. Product s
BS EN 3155-031:2006 BS EN 3155-031:2006. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, coaxial, shielded, size 12, female, type D, crimp, class R. Product
BS EN ISO 21183-2:2006 BS EN ISO 21183-2:2006. Light conveyor belts. List of equivalent terms
06/30149693 DC 06/30149693 DC. ISO 27471. Aircraft ground equipment. Upper deck loader. Functional requirements
BS EN 12094-8:2006 BS EN 12094-8:2006. Fixed firefighting systems. Components for gas extinguishing systems. Requirements and test methods for connectors
BS EN 12094-6:2006 BS EN 12094-6:2006. Fixed firefighting systems. Components for gas extinguishing systems. Requirements and test methods for non-electrical disable devices
BS EN 2349-309:2006 BS EN 2349-309:2006. Aerospace series. Requirements and test procedures for relays and contactors. Exported spikes
PD CLC/TR 50450:2006 PD CLC/TR 50450:2006. Resistibility requirements for equipment having (a) telecommunication port(s)
BS EN 253:2003+A2:2006 BS EN 253:2003+A2:2006. District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Pipe assembly of steel service pipe, polyurethane therma
06/30149749 DC 06/30149749 DC. ISO 24011. Resilient floor coverings. Specification for plain and decorative linoleum
BS ISO 11451-4:2006 BS ISO 11451-4:2006. Road vehicles. Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy. Bulk current injection (BCI)
BS ISO 16992:2006 BS ISO 16992:2006. Passenger car tyres. Spare unit substitutive equipment (SUSE)
06/30149765 DC 06/30149765 DC. IEC 60050-411 AMD 1. International Electrotechnical Vocabulary. Part 411. Rotating machinery
PD EN 14035-12:2003 PD EN 14035-12:2003. Fireworks. Flash bangers and flash banger batteries. Specification and test methods
BS EN 61086-2:2004 BS EN 61086-2:2004. Coatings for loaded printed wire boards (conformal coatings). Methods of test
BIP 2112:2006 BIP 2112:2006. The audit of active fire safety systems. Practitioner's assessment and approval procedures manual
06/30149782 DC 06/30149782 DC. EN 50348. Stationary automatic electrostatic spraying equipment for non-flammable liquid spraying material. Safety
BIP 3071:2006 BIP 3071:2006. Emergency lighting CD-ROM
CWA 15533:2006 CWA 15533:2006. A model for the classification of quality approaches in eLearning
CWA 15535-1:2006 CWA 15535-1:2006. Multi-application multi-issuer citizen card scheme standardisation. Business model agreement
CWA 15535-2:2006 CWA 15535-2:2006. Multi-application multi-issuer citizen scheme standardisation. Scheme architecture and implementation solution
CWA 15537:2006 CWA 15537:2006. Network enabled abilities. Service-oriented architecture for civilian and military crisis management
BS ISO/IEC 15426-1:2006 BS ISO/IEC 15426-1:2006. Information technology. Automatic identification and data capture techniques. Bar code verifier conformance specification. Linear symbols
06/30149817 DC 06/30149817 DC. EN 50289-1-17. Communication cables. Specifications for test methods. Part 1-17. Electrical test methods. Exogenous Crosstalk ExNEXT
06/30149821 DC 06/30149821 DC. IEC 62475. High current test techniques. General definitions and test requirements, measuring systems
06/30149825 DC 06/30149825 DC. EN 60079-25. Explosive atmospheres. Part 25. Intrinsically safe systems
06/30149829 DC 06/30149829 DC. EN 15518. Winter maintenance equipment. Road weather information systems. Product description and performance
06/30149923 DC 06/30149923 DC. IEC 60282-2. High voltage fuses. Part 2. Expulsion fuses
DD ISO/TS 2963:2006 DD ISO/TS 2963:2006. Cheese and processed cheese products. Determination of citric acid content. Enzymatic method
PD CEN/TR 15472:2006 PD CEN/TR 15472:2006. Postal services. Measurement of transit times for parcels by the use of a track and trace system
BS ISO 10842:2006 BS ISO 10842:2006. Aircraft. Ground service connections. Locations and types
PAS 72:2006 PAS 72:2006. Responsible fishing. Specification of good practice for fishing vessels
PAS 66:2005 PAS 66:2005. Official identification eartags for sheep and goats. Specification
BS EN 13243:2004 BS EN 13243:2004. Safety requirements for cableways installation designed to carry persons. Electrical equipment other than for drive systems
06/30149972 DC 06/30149972 DC. IEC 62055-41. Electricity metering. Payment systems. Part 41. Standard transfer specification. Application layer protocol for one-way token carrier systems
BS EN 50342-1:2006 BS EN 50342-1:2006. Lead-acid starter batteries. General requirements and methods of test
BS ISO 4306-5:2005 BS ISO 4306-5:2005. Cranes. Vocabulary. Bridge and gantry cranes
06/30150010 DC 06/30150010 DC. CISPR 16-2-3 AMD 1. Specification for radio disturbance and immunity measuring apparatus and methods. Part 2-3. Methods of measurement of disturbances and immunity. Radi
BS ISO 6883:2007 BS ISO 6883:2007. Animal and vegetable fats and oils. Determination of conventional mass per volume (litre weight in air)
DD CEN/TS 15213-3:2006 DD CEN/TS 15213-3:2006. Road transport and traffic telematics. After-theft systems for the recovery of stolen vehicles. Interface and system requirements for short range communi
DD CEN/TS 15213-4:2006 DD CEN/TS 15213-4:2006. Road transport and traffic telematics. After-theft systems for the recovery of stolen vehicles. Interface and system requirements for long range communic
DD CEN/TS 15213-5:2006 DD CEN/TS 15213-5:2006. Road transport and traffic telematics. After-theft systems for the recovery of stolen vehicles. Messaging interface
PD IEC/TR 61282-3:2006 PD IEC/TR 61282-3:2006. Fibre optic communication system design guides. Calculation of link polarization mode dispersion
BS ISO 1977:2006 BS ISO 1977:2006. Conveyor chains, attachments and sprockets
06/30150072 DC 06/30150072 DC. IEC 62055-51. Electricity Metering. Payment Systems. Part 51. Standard Transfer Specification. Physical layer protocol for one-way numeric and magnetic card token carrie
06/30150094 DC 06/30150094 DC. IEC 60906-2. Switches for household and similar fixed electrical installations. Part 2. Particular requirements. Section 2. Electromagnetic remote-control switches (RCS)
BIP 2102:2006 BIP 2102:2006. Environment management report. Focus on Waste Management
BS EN 61033:2006 BS EN 61033:2006. Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate
PD CEN/TR 15351:2006 PD CEN/TR 15351:2006. Plastics. Guide for vocabulary in the field of degradable and biodegradable polymers and plastic items
06/30150173 DC 06/30150173 DC. ISO 12945-3. Textiles-Determination of fabric propensity to surface fuzzing and to pilling-Part 3 :Random tumble pilling method
PD CLC/TR 50473:2007 PD CLC/TR 50473:2007. Recommendations for dimensional co-ordination between enclosures and built-in devices for rail fixing for household and similar installations
BS 1123:2006 BS 1123:2006. Fusible plugs for steam boilers and compressed air applications. Specification
BS EN 12975-1:2006 BS EN 12975-1:2006. Thermal solar systems and components. Solar collectors. General requirements
BS EN 12975-2:2006 BS EN 12975-2:2006. Thermal solar systems and components. Solar collectors. Test methods
06/30150269 DC 06/30150269 DC. EN 14636-2. Plastics piping systems for non-pressure drainage and sewerage. Polyester resin concrete (PRC). Part 2. Manholes and inspection chambers
BS EN 60335-2-97:2001 BS EN 60335-2-97:2001. Safety of household and similar electrical appliances. Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment
DD ISO/TS 21108:2005 DD ISO/TS 21108:2005. Hand-held power tools. Impulse wrenches. Dimensions and tolerances of interface to power socket
DD CEN/TS 14014:2006 DD CEN/TS 14014:2006. Postal services. Hybrid mail. XML definition of encapsulation of letters for automated postal handling
06/30150303 DC 06/30150303 DC. EN 50291-1. Electrical apparatus for the detection of carbon monoxide in domestic premises. Part 1. Test methods and performance requirements
06/30150308 DC 06/30150308 DC. EN 50292. Electrical apparatus for the detection of carbon monoxide in domestic premises. Guide on the selection, installation, use and maintenance
06/30150311 DC 06/30150311 DC. ISO 6983-1. Industrial automation systems and Integration. Numerical control of machines. Program format and definitions of address words. Part 1. Data format for positi
PD IEC/TR 60068-3-12:2007 PD IEC/TR 60068-3-12:2007. Environmental testing. Supporting documentation and guidance. Method to evaluate a possible lead-free solder reflow temperature profile
BS EN 14681:2006 BS EN 14681:2006. Safety of machinery. Safety requirements for machinery and equipment for production of steel by electric arc furnaces
BS EN ISO 5674:2006 BS EN ISO 5674:2006. Tractors and machinery for agriculture and forestry. Guards for power take-off (PTO) drive-shafts. Strength and wear tests and acceptance criteria
BS EN ISO 22868:2006 BS EN ISO 22868:2006. Forestry machinery. Noise test code for portable hand-held machines with internal combustion engine. Engineering method (grade 2 accuracy)
BS EN 12915-1:2003 BS EN 12915-1:2003. Products used for the treatment of water intended for human consumption. Granular activated carbon. Virgin granular activated carbon
BS EN 12915-2:2003 BS EN 12915-2:2003. Products used for the treatment of water intended for human consumption. Granular activated carbon. Reactivated granular activated carbon
BS 5000-3:2006 BS 5000-3:2006. Rotating electrical machines of particular types or for particular applications. Generators to be driven by reciprocating internal combustion engines. Requirements for r
DD IEC/PAS 61169-4:2006 DD IEC/PAS 61169-4:2006. Radio-frequency connectors . Sectional specification. Radio-frequency coaxial connectors with inner diameter of outer conductor 16 mm (0,63 in) with sc
BS EN 14411:2006 BS EN 14411:2006. Ceramic tiles. Definitions, classification, characteristics and marking
BS ISO 31-0:1992 BS ISO 31-0:1992. Quantities and units. General principles
BS EN 13967:2004+A1:2006 BS EN 13967:2004+A1:2006. Flexible sheets for waterproofing. Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet. Definitions and characte
BS EN 13969:2004 BS EN 13969:2004. Flexible sheets for waterproofing. Bitumen damp proof sheets including bitumen basement tanking sheets. Definitions and characteristics
BS EN 13970:2004 BS EN 13970:2004. Flexible sheets for waterproofing. Bitumen water vapour control layers. Definitions and characteristics
BS EN 13984:2004+A1:2006 BS EN 13984:2004+A1:2006. Flexible sheets for waterproofing. Plastic and rubber vapour control layers. Definitions and characteristics
BS EN 13707:2004 BS EN 13707:2004. Flexible sheets for waterproofing. Reinforced bitumen sheets for roof waterproofing. Definition and characteristics
06/30150517 DC 06/30150517 DC. IEC 62153-4-9. Metallic communication cable test methods. Part 4-9. Electromagnetic compatibility (EMC). Coupling attenuation of screened balanced cables, triaxial metho
BS EN ISO 2419:2006 BS EN ISO 2419:2006. Leather. Physical and mechanical tests. Sample preparation and conditioning
BS EN 13785:2005+A1:2008 BS EN 13785:2005+A1:2008. Regulators with a capacity of up to and including 100 kg/h, having a maximum nominal outlet pressure of up to and including 4 bar, other than those c
BS EN 13786:2004+A1:2008 BS EN 13786:2004+A1:2008. Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a capacity of up to and including 100 kg/h, and their
BS EN 4406:2006 BS EN 4406:2006. Aerospace series. Paints and varnishes. Two component cold curing polyurethane coating. Abrasion resistant
BS EN 4592:2006 BS EN 4592:2006. Aerospace series. Paints and varnishes. Test method for determination of infrared reflectance
06/30150569 DC 06/30150569 DC. BS ISO 27327. Industrial fans. Laboratory methods of testing air curtain units for aerodynamic performance rating
BS EN 12588:2006 BS EN 12588:2006. Lead and lead alloys. Rolled lead sheet for building purposes
CWA 15538:2006 CWA 15538:2006. Coding for customers in the rail transport chain
CWA 15539:2006 CWA 15539:2006. Numbering of and coding system for trains
BS EN ISO 11960:2004 BS EN ISO 11960:2004. Petroleum and natural gas industries. Steel pipes for use as casing or tubing for wells
CWA 15540:2006 CWA 15540:2006. Coding for railway undertakings, infrastructure managers and other companies, involved in the rail transport chain
CWA 15541:2006 CWA 15541:2006. Coding for railway business locations
BS EN 60745-2-2:2003 BS EN 60745-2-2:2003. Hand-held motor-operated electric tools. Safety. Particular requirements for screwdrivers and impact wrenches
BS ISO 8267-1:2005 BS ISO 8267-1:2005. Aircraft. Tow bar attachment fittings interface requirements. Main line aircraft
BS ISO 8267-2:2005 BS ISO 8267-2:2005. Aircraft. Tow bar attachment fittings interface requirements. Regional aircraft
BS EN 14431:2004 BS EN 14431:2004. Vitreous and porcelain enamels. Characteristics of the enamel coatings applied to steel panels intended for architecture
BS ISO 1728:2006 BS ISO 1728:2006. Road vehicles. Pneumatic braking connections between motor vehicles and towed vehicles. Interchangeability
ISO11674 : 2006 EDTN2 ISO11674 : 2006 EDTN2. ISO 11674 Ships and marine technology - Heading control systems
BS ISO 14469-3:2006 BS ISO 14469-3:2006. Road vehicles. Compressed natural gas (CNG) refuelling connector. 25 MPa (250 bar) connector
BS EN 13964:2004+A1:2006 BS EN 13964:2004+A1:2006. Suspended ceilings. Requirements and test methods
BS EN 3155-045:2006 BS EN 3155-045:2006. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, female, type A, double crimping, class T. Product standard
06/30150714 DC 06/30150714 DC. BS IEC 61995-2. Devices for the connection of luminaires for household and similar purposes. Part 2. Standard sheets for DCL
PD IEC/TR 62350:2006 PD IEC/TR 62350:2006. Guidance for the correct use of residual current-operated protective devices (RCDs) for household and similar use
06/30150738 DC 06/30150738 DC. BS IEC 62423. Type B Residual Current Operated Circuit-Breakers with and without integral overcurrent protection for household and similar uses
BS ISO 4928:2006 BS ISO 4928:2006. Road vehicles. Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120°C max
BS EN 3646-011:2006 BS EN 3646-011:2006. Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175°C or 200°C continuous. Dummy receptacle. Product standard
BS ISO 6118:2006 BS ISO 6118:2006. Road vehicles. Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 70°C max.
BS EN 14035-28:2004 BS EN 14035-28:2004. Fireworks. Roman candles. Specification and test methods
BS EN 60745-2-4:2003 BS EN 60745-2-4:2003. Hand-held motor-operated electric tools. Safety. Particular requirements for sanders and polishers other than disk type
BS EN 13279-1:2005 BS EN 13279-1:2005. Gypsum binders and gypsum plasters. Definitions and requirements
BS EN 60335-2-5:2003 BS EN 60335-2-5:2003. Specification for safety of household and similar electrical appliances. Particular requirements for dishwashers
BS EN 60745-2-8:2003 BS EN 60745-2-8:2003. Hand-held motor-operated electric tools. Safety. Particular requirements for shears and nibblers
BS EN 1339:2003 BS EN 1339:2003. Concrete paving flags. Requirements and test methods
BS EN 1340:2003 BS EN 1340:2003. Concrete kerb units. Requirements and test methods
BS EN 3716-005:2006 BS EN 3716-005:2006. Aerospace series. Connector, single-way with triaxial interface, for transmission of digital data. Crimp receptacle. Product standard
BS EN 3716-006:2006 BS EN 3716-006:2006. Aerospace series. Connector, single-way with triaxial interface, for transmission of digital data. Crimp plug. Product standard
BS ISO 20653:2006 BS ISO 20653:2006. Road vehicles. Degrees of protection (IP-Code). Protection of electrical equipment against foreign objects, water and access
BS EN 4359:2006 BS EN 4359:2006. Aerospace series. Six lobe recess. Drivers. Technical Specification
BS EN 4358:2006 BS EN 4358:2006. Aerospace series. Six lobe recess. Drivers, double ended, 90
BS EN 4357:2006 BS EN 4357:2006. Aerospace series. Six lobe recess. Drivers, handle
BS EN 4356:2006 BS EN 4356:2006. Aerospace series. Six lobe recess. Drivers, short
BS EN 4354:2006 BS EN 4354:2006. Aerospace series. Six lobe recess. Drivers, relieved
BS EN 4110:2006 BS EN 4110:2006. Aerospace series. Wrenches, open end, box
BS EN 4109:2006 BS EN 4109:2006. Aerospace series. Wrenches, face spanner
BS EN 4108:2006 BS EN 4108:2006. Aerospace series. Wrenches, crow foot, attachment socket, socket drive
BS EN 3913:2007 BS EN 3913:2007. Aerospace series. Insert, thin wall, self-locking, short, in heat resisting nickel base alloy NI-PH2601 (Ni-P100HT, Inconel 718), silver plated on internal thread, for
BS EN 3912:2007 BS EN 3912:2007. Aerospace series. Bolts, pan head, six lobe recess, relieved shank, long thread, in heat resisting steel FE-PA2601 (FE-PA92HT, A286), silver plated. Classification: 11
BS EN 4158:2006 BS EN 4158:2006. Aerospace series. Paints and varnishes. Test method for measurement of electrical surface resistance of conductive layers
06/30150871 DC 06/30150871 DC. BS IEC 60061-1 AMD. Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1. Lamp caps
06/30150914 DC 06/30150914 DC. BS EN 81-31. Safety rules for the construction and installation of lifts. Lifts for the transport of goods only. Part 31. Accessible goods only lifts
BS EN 1555-3:2002 BS EN 1555-3:2002. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Fittings
BS ISO 19706:2007 BS ISO 19706:2007. Guidelines for assessing the fire threat to people
ISO13571 : 2007 EDTN1 ISO13571 : 2007 EDTN1. ISO 13571:2007 Life-threatening components of fire - Guidelines for the estimation of time available for escape using fire data
BS 8490:2007 BS 8490:2007. Guide to siphonic roof drainage systems
BIP 2103:2006 BIP 2103:2006. Environmental Management Report. Focus on Environment & Corporate Responsibility Communications
ISO/IEC9995-1 : 2006 EDTN2 ISO/IEC9995-1 : 2006 EDTN2. ISO/IEC 9995-1 Information technology - Keyboard layouts for text and office systems. Part 1: General principles governing keyboard layouts
ISO/IEC9995-5 : 2006 EDTN2 ISO/IEC9995-5 : 2006 EDTN2. ISO/IEC 9995-5 Information technology - Keyboard layouts for text and office systems. Part 5: Editing section
ISO/IEC9995-6 : 2006 EDTN2 ISO/IEC9995-6 : 2006 EDTN2. ISO/IEC 9995-6 Information technology - Keyboard layouts for text and office systems. Part 6: Function section
06/30150988 DC 06/30150988 DC. BS IEC 60512-26-100. Connectors for electronic equipment. Tests and measurements. Part 26-100. Measurement setup, test and reference arrangements and measurements for in
ISO/IEC9995-8 : 2006 EDTN2 ISO/IEC9995-8 : 2006 EDTN2. ISO/IEC 9995-8 Information technology - Keyboard layouts for text and office systems. Part 8: Allocation of letters to the keys of a numeric keyp
DD CEN/TS 14175-5:2006 DD CEN/TS 14175-5:2006. Fume cupboards. Recommendations for installation and maintenance
KIT 32 KIT 32. IT service management standards and guidance kit
BS EN 60335-2-70:2002 BS EN 60335-2-70:2002. Household and similar electrical appliances. Safety. Particular requirements for milking machines
BS 8501:2002 BS 8501:2002. Graphical symbols and signs. Public information symbols
06/30151043 DC 06/30151043 DC. BS ISO 4301-2. Cranes. Classification. Part 2. Mobile cranes
BS EN 60335-2-71:2003 BS EN 60335-2-71:2003. Household and similar electrical appliances. Safety. Particular requirements for electrical heating appliances for breeding and rearing animals
BS EN 60335-2-87:2002+A1:2007 BS EN 60335-2-87:2002+A1:2007. Household and similar electrical appliances. Safety. Particular requirements for electrical animal-stunning equipment
BS EN 62317-9:2006 BS EN 62317-9:2006. Ferrite cores. Dimensions. Planar cores
PAS 82:2006 PAS 82:2006. Shopfitting. Management system specification
BS EN 13096:2003 BS EN 13096:2003. Transportable gas cylinders. Conditions for filling gases into receptacles. Single component gases
BS EN ISO 18233:2006 BS EN ISO 18233:2006. Acoustics. Application of new measurement methods in building and room acoustics
BS EN 14035-19:2003 BS EN 14035-19:2003. Fireworks. Hand-held sparklers. Specification and test methods
BS EN 13938-1:2004 BS EN 13938-1:2004. Explosives for civil uses. Propellants and rocket propellants. Requirements
BS ISO 16750-1:2006 BS ISO 16750-1:2006. Road vehicles. Environmental conditions and testing for electrical and electronic equipment. General
BS ISO 16750-2:2006 BS ISO 16750-2:2006. Road vehicles. Environmental conditions and testing for electrical & electronic equipment. Electrical loads
BS ISO 16750-4:2006 BS ISO 16750-4:2006. Road vehicles. Environmental conditions and testing for electrical & electronic equipment. Climatic loads
BS ISO 19703:2005 BS ISO 19703:2005. Generation and analysis of toxic gases. Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires
BS EN ISO 6887-4:2003 BS EN ISO 6887-4:2003. Microbiology of food and animal feeding stuffs. Preparation of test samples, initial suspension and decimal dilutions for microbiological examination. Spec
06/30151320 DC 06/30151320 DC. BS IEC 62132-2. Integrated Circuits, Measurement of Electro magnetic Immunity, 150 kHz to 1 GHz. Part 2. Measurement of Radiated Immunity Tem-Cell and Wideband Tem-Cell
06/30151323 DC 06/30151323 DC. BS IEC 61988-5. Plasma display panels. Part 5. Generic specification
BS EN 55014-1:2006+A1:2009 BS EN 55014-1:2006+A1:2009. Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus. Emission
BS ISO/IEC 7812-2:2007 BS ISO/IEC 7812-2:2007. Identification cards. Identification of issuers. Application and registration procedures
BS ISO/IEC 7816-13:2007 BS ISO/IEC 7816-13:2007. Identification cards. Integrated circuit cards. Commands for application management in a multi-application environment
BS EN 55015:2006+A2:2009 BS EN 55015:2006+A2:2009. Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
BS EN 13317:2002 BS EN 13317:2002. Tanks for transport of dangerous goods. Service equipment for Tanks. Manhole cover assembly
BS ISO 1409:2006 BS ISO 1409:2006. Plastics/rubber. Polymer dispersions and rubber latices (natural and synthetic) Determination of surface tension by the ring method
ISO/IEC24738 : 2006 EDTN1 ISO/IEC24738 : 2006 EDTN1. ISO/IEC24738 : 2006 Information technology - Icon symbols and functions for multimedia link attributes
BS EN ISO 22088-4:2006 BS EN ISO 22088-4:2006. Plastics. Determination of resistance to environmental stress cracking (ESC). Ball or pin impression method
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
