BIS Standards Catalogue
BS 882:1992 BS 882:1992. Specification for aggregates from natural sources for concrete
WD/PP7305 EXERCISE SHEETS 1-34 WD/PP7305 EXERCISE SHEETS 1-34.
PP7305 : 1991 PP7305 : 1991 .
BS EN 139:1995 BS EN 139:1995. Respiratory protective devices. Compressed air line breathing apparatus for use with a full face mask, half mask or a mouthpiece assembly. Requirements, testing, marking
BS 4078-2:1989 BS 4078-2:1989. Powder actuated fixing systems. Specification for tools
BS 876:1995 BS 876:1995. Specification for hand hammers
BS 3424-6:1982 BS 3424-6:1982. Testing coated fabrics. Method 8B. Hydraulic method for determination of bursting strength
BS 3680-5:1992, ISO 1070:1992 BS 3680-5:1992, ISO 1070:1992. Measurement of liquid flow in open channels. Slope area method of estimation
BS AU 50-1.6.1b:1995, ISO 5751-1:1994 BS AU 50-1.6.1b:1995, ISO 5751-1:1994. Tyres and wheels. Tyres. Motorcycle tyres. Specification for general requirements and design guide for designations, dimens
BS EN 60335-2-36:1995 BS EN 60335-2-36:1995. Specification for safety of household and similar electrical appliances. Particular requirements. Commercial electric cooking ranges, ovens, hobs and hob e
BS EN 60601-2-10:2001, BS 5724-2.10:1988 BS EN 60601-2-10:2001, BS 5724-2.10:1988. Medical electrical equipment. Particular requirements for the safety of nerve and muscle stimulators
BS ISO 6107-3:1993, BS 6068-1.3:1993 BS ISO 6107-3:1993, BS 6068-1.3:1993. Water quality. Vocabulary. Part 3
BS 6219:1996, ISO 5223:1995 BS 6219:1996, ISO 5223:1995. Test sieves for cereals
BS AU 50-3.7:1985 BS AU 50-3.7:1985. Tyres and wheels. Valves. Code of practice for the selection and care of tyre inflation valves for passenger cars (including caravans and light trailers). Section
BS AU 50-3.8:1985 BS AU 50-3.8:1985. Tyres and wheels. Valves. Code of practice for the selection and care of tyre inflation valves for commercial vehicles. Section 8a: Code of practice for the select
BS EN ISO 6402-2:1999 BS EN ISO 6402-2:1999. Plastics. Impact resistant acrylonitrile/styrene moulding and extrusion materials (ASA, AES, ACS), excluding butadiene-modified materials. Preparation of t
BS EN ISO 1872-1:1999 BS EN ISO 1872-1:1999. Polyethylene (PE) moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 585:1999 BS EN ISO 585:1999. Plastics. Unplasticized cellulose acetate. Determination of moisture content
BS EN ISO 8986-1:1999 BS EN ISO 8986-1:1999. Plastics. Polybutene (PB) moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 2897-2:1999 BS EN ISO 2897-2:1999. Plastics. Impact-resistant polystyrene (PS-I) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 10366-2:1999 BS EN ISO 10366-2:1999. Plastics. Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials. Preparation of test specimens and determination of
BS EN ISO 1600:1999 BS EN ISO 1600:1999. Plastics. Cellulose acetate. Determination of light absorption of moulded specimens produced using different periods of heating
BS EN ISO 10366-1:1999 BS EN ISO 10366-1:1999. Plastics. Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 4894-2:1999 BS EN ISO 4894-2:1999. Plastics. Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials. Preparation of test specimens and determination of properties
BS 598-107:1990 BS 598-107:1990. Sampling and examination of bituminous mixtures for roads and other paved areas. Method of test for the determination of the composition of design wearing course rolle
BS EN ISO 1622-2:1999 BS EN ISO 1622-2:1999. Plastics. Polystrene (PS) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN 60598-2-7:1997 BS EN 60598-2-7:1997. Luminaires. Particular requirements. Portable luminaires for garden use
BS EN 437:1994 BS EN 437:1994. Specification for test gases, test pressures and categories of appliance, for gas appliances
BS EN 295-2:1991 BS EN 295-2:1991. Vitrified clay pipes and fittings and pipe joints for drains and sewers. Quality control and sampling
BS EN 55014-1:1997 BS EN 55014-1:1997. Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus. Emission. Product family standard
BS EN 60317-35:1995, IEC 60317-35:1992 BS EN 60317-35:1995, IEC 60317-35:1992. Specifications for particular types of winding wires. Solderable polyurethane enamelled round copper wire, class 155, wit
BS EN 60317-19:1996, IEC 60317-19:1990 BS EN 60317-19:1996, IEC 60317-19:1990. Specifications for particular types of winding wires. Solderable polyurethane enamelled round copper wire overcoated with
WD/BS5500 : 1997 (TEXT) WD/BS5500 : 1997 (TEXT). Specification for unfired fusion welded pressure vessels
BS 6701:1994 BS 6701:1994. Code of practice for installation of apparatus intended for connection to certain telecommunication systems
BS EN ISO 176:2000 BS EN ISO 176:2000. Plastics. Determination of loss of plasticizers. Activated carbon method
WD/BSEN12350-2 : 2000 WD/BSEN12350-2 : 2000. BS EN 12350-2 Testing fresh concrete. Part 2: Slump test
BS EN ISO 1797-1:1995 BS EN ISO 1797-1:1995. Dental rotary instruments. Shanks. Shanks made of metals
BS EN 60529:1992 BS EN 60529:1992. Specification for degrees of protection provided by enclosures (IP code)
BS 5911-2:1982 BS 5911-2:1982. Precast concrete pipes, fittings and ancillary products. Specification for inspection chambers
BS EN 494:1994 BS EN 494:1994. Fibre-cement profiled sheets and fittings for roofing. Product specification and test methods
BS EN ISO 177:2000 BS EN ISO 177:2000. Plastics. Determination of migration of plasticizers
BS EN ISO 9706:2000 BS EN ISO 9706:2000. Information and documentation. Paper for documents. Requirements for permanence
BS EN ISO 4614:2000 BS EN ISO 4614:2000. Plastics. Melamine-formaldehyde mouldings. Determination of extractable formaldehyde
BS EN 492:1994 BS EN 492:1994. Fibre-cement slates and their fittings for roofing. Product specification and test methods
BS EN ISO 60:2000 BS EN ISO 60:2000. Plastics. Determination of apparent density of material that can be poured from a specified funnel
BS EN 172:1995 BS EN 172:1995. Specification for sunglare filters used in personal eye-protectors for industrial use
BS EN ISO 11248:2000, BS 2782-1:Method 136:2000 BS EN ISO 11248:2000, BS 2782-1:Method 136:2000. Plastics. Thermosetting moulding materials. Evaluation of short-term performance at elevated temperatur
BS EN ISO 2555:2000 BS EN ISO 2555:2000. Plastics. Resins in the liquid state or as emulsions or dispersions. Determination of apparent viscosity by the Brookfield Test method
BS EN ISO 61:2000 BS EN ISO 61:2000. Plastics. Determination of apparent density of moulding material that cannot be poured from a specified funnel
BS EN ISO 1598:2000 BS EN ISO 1598:2000. Plastics. Cellulose acetate. Determination of insoluble particles
BS EN ISO 1157:2000 BS EN ISO 1157:2000. Plastics. Cellulose acetate in dilute solution. Determination of viscosity number and viscosity ratio
BS EN ISO 1597:2000 BS EN ISO 1597:2000. Plastics. Unplasticized cellulose acetate. Determination of acetic acid yield
BS EN ISO 1163-2:2000 BS EN ISO 1163-2:2000. Plastics. Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS 7449:1991 BS 7449:1991. Specification for inclusion of glass in the construction of furniture, other than tables or trolleys, including cabinets, shelving systems and wall hung or free standing mir
BS EN 60127-6:1994, IEC 60127-6:1994 BS EN 60127-6:1994, IEC 60127-6:1994. Miniature fuses. Fuse-holders for miniature cartridge fuse-links
BS EN 60265-2:1994 BS EN 60265-2:1994. Specification for high-voltage switches. Specification for high-voltage switches. High-voltage switches for rated voltages of 52 kV and above
BS 691:1987 BS 691:1987. Specification for sub-normal range ovulation and dual-scale clinical maximum thermometers (mercury-in-glass, solid stem)
BS 6985:1989 BS 6985:1989. Specification for dual-scale and ovulation clinical maximum thermometers (mercury-in-glass, enclosed scale)
BS 903-A58:1990 BS 903-A58:1990. Physical testing of rubber. Methods using the Mooney viscometer
BS EN 60603-1:2000, IEC 60603-1:1991 BS EN 60603-1:2000, IEC 60603-1:1991. Connectors for frequencies below 3 MHz for use with printed boards. Generic specification. General requirements and guide for
BS 4479-8:1990 BS 4479-8:1990. Design of articles that are to be coated. Recommendations for vitreous enamel coatings
BS 7016-2:1988, ISO 7967-2:1987 BS 7016-2:1988, ISO 7967-2:1987. Components and systems of reciprocating internal combustion engines. Glossary of terms for main running gear
BS ISO 5725-1:1994 BS ISO 5725-1:1994. Accuracy (trueness and precision) of measurement methods and results. General principles and definitions
BS EN 60285:1995, IEC 60285:1993 BS EN 60285:1995, IEC 60285:1993. Alkaline secondary cells and batteries. Sealed nickel-cadmium cylindrical rechargeable single cells
BS EN 60928:1995, IEC 60928:1995 BS EN 60928:1995, IEC 60928:1995. Auxiliaries for lamps. a.c. supplied electronic ballasts for tubular fluorescent lamps. General and safety requirements
BS EN 60947-6-2:1993 BS EN 60947-6-2:1993. Specification for low-voltage switchgear and controlgear. Multiple function equipment. Control and protective switching devices (or equipment) (CPS)
BS EN ISO 1622-1:2000 BS EN ISO 1622-1:2000. Plastics. Polystrene (PS) moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 2580-2:2000 BS EN ISO 2580-2:2000. Plastics. Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 8130-9:2000 BS EN ISO 8130-9:2000. Coating powders. Sampling
BS EN 60099-4:1993, IEC 60099-4:1991 BS EN 60099-4:1993, IEC 60099-4:1991. Surge arresters. Metal-oxide surge arresters without gaps for a.c. systems
BS EN ISO 7840:1995 BS EN ISO 7840:1995. Small craft. Fire resistant fuel hoses
BS 2F 128:1992 BS 2F 128:1992. Specification for cotton webbing suitable for aerospace purposes (warp yarn nominally R 310 tex)
BS EN ISO 8665:1996 BS EN ISO 8665:1996. Small craft. Marine propulsion engines and systems. Power measurements and declarations
BS 7F 47:1990 BS 7F 47:1990. Specification for cotton tape for aerospace purposes
BS EN 271:1995 BS EN 271:1995. Respiratory protective devices. Compressed air line or powered fresh air hose breathing apparatus incorporating a hood for use in abrasive blasting operations. Requireme
BS EN ISO 8469:1995 BS EN ISO 8469:1995. Small craft. Non-fire-resistant fuel hoses
BS 5599:1993 BS 5599:1993. Specification for hard anodic oxidation coatings on aluminium and its alloys for engineering purposes
BS 3987:1991 BS 3987:1991. Specification for anodic oxidation coatings on wrought aluminium for external architectural applications
BS EN ISO 182-2:2000 BS EN ISO 182-2:2000. Plastics. Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any oth
BS 6493-1.1:1984, IEC 60747-1:1983 BS 6493-1.1:1984, IEC 60747-1:1983. Semiconductor devices. Discrete devices. General
BS EN 60810:1995 BS EN 60810:1995. Specification for lamps for road vehicles. Performance requirements
BS EN ISO 2039-2:2000 BS EN ISO 2039-2:2000. Determination of Rockwell hardness. Rockwell hardness. Rockwell hardness
BS EN 397:1995 BS EN 397:1995. Specification for industrial safety helmets
BS 3999-5:1990 BS 3999-5:1990. Methods of measuring the performance of household electrical appliances. Electric cookers
BS EN ISO 8986-2:1996 BS EN ISO 8986-2:1996. Plastics. Polybutene (PB) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 7393-3:2000, BS 6068-2.27:1990 BS EN ISO 7393-3:2000, BS 6068-2.27:1990. Water quality. Determination of free chlorine and total chlorine. Iodometric titration method for the determination o
BS EN ISO 7393-1:2000, BS 6068-2.25:1986 BS EN ISO 7393-1:2000, BS 6068-2.25:1986. Water quality. Determination of free chlorine and total chlorine. Titrimetric method using N,N-diethyl-1,4-phenylened
BS EN ISO 7980:2000, BS 6068-2.30:1987 BS EN ISO 7980:2000, BS 6068-2.30:1987. Water quality. Determination of calcium and magnesium. Atomic absorption spectrometric method
BS EN ISO 7393-2:2000, BS 6068-2.26:1986 BS EN ISO 7393-2:2000, BS 6068-2.26:1986. Water quality. Determination of free chlorine and total chlorine. Colorimetric method using N,N-diethyl-1,4-phenylene
BS EN 563:1994 BS EN 563:1994. Safety of machinery. Temperatures of touchable surfaces. Ergonomics data to establish temperature limit values for hot surfaces
BS EN ISO 4535:2000, BS 1344-19:2000 BS EN ISO 4535:2000, BS 1344-19:2000. Vitreous and porcelain enamels. Apparatus for determination of resistance to hot detergent solutions used for washing textile
BS EN 60249-2-1:1994, IEC 60249-2-1:1985 BS EN 60249-2-1:1994, IEC 60249-2-1:1985. Specifications. Specification for phenolic cellulose paper copper-clad laminated sheet, high electrical quality. Spec
BS 2TA 100:1973 BS 2TA 100:1973. Procedure for inspection and testing of wrought titanium and titanium alloys
BS EN ISO 4892-3:2000 BS EN ISO 4892-3:2000. Plastics. Methods of exposure to laboratory light sources. Fluorescent UV lamps
BS M 34:1970 BS M 34:1970. Method of preparation and use of radiographic techniques
BS EN ISO 10592:1995 BS EN ISO 10592:1995. Small craft. Hydraulic steering systems
BS EN ISO 9097:1995 BS EN ISO 9097:1995. Small craft. Electric fans
BS EN 28849:1993, ISO 8849:1990 BS EN 28849:1993, ISO 8849:1990. Small craft. Electrically operated bilge-pumps
BS EN ISO 11547:1996 BS EN ISO 11547:1996. Small craft. Start-in-gear protection
BS EN 60249-2-2:1994, IEC 60249-2-2:1985 BS EN 60249-2-2:1994, IEC 60249-2-2:1985. Specifications. Specification for phenolic cellulose paper copper-clad laminated sheet, economic quality. Specificati
BS EN 60249-2-3:1994, IEC 60249-2-3:1987 BS EN 60249-2-3:1994, IEC 60249-2-3:1987. Specifications. Metal-clad base materials for printed wiring boards. Copper-clad base material. Specification for epo
BS EN 61068-3-1:1996, IEC 61068-3-1:1995 BS EN 61068-3-1:1996, IEC 61068-3-1:1995. Polyester fibre woven tapes. Specification for individual materials. Tapes woven on conventional or shuttleless looms
BS 2S 143:1976 BS 2S 143:1976. Specification for chromium-nickel-copper-molybdenum corrosion-resisting steel (precipitation hardening) billets, bars, forgings and parts (930-1080 MPa)
BS S 151:1975 BS S 151:1975. Specification for chromium-nickel-molybdenum-vanadium heat-resisting steel billets, bars, forgings and parts (930-1130 MPa: limiting ruling section 150 mm) (Cr 12, Ni 2.5,
BS 4S 106:1976 BS 4S 106:1976. Specification. 3% chromium-molybdenum steel billets, bars, forgings and parts (930-1080 MPa: limiting ruling section 150 mm) (suitable for nitriding)
BS 2F 127:1991 BS 2F 127:1991. Specification for nylon fabrics suitable for coating with natural or synthetic elastomers for aerospace purposes
BS F 139:1989 BS F 139:1989. Specification for aluminized polychloroprene rubber-coated nylon fabric (350 g/m2) for aerospace purposes
BS EN ISO 183:2000 BS EN ISO 183:2000. Plastics. Qualitative evaluation of the bleeding of colorants
WD/BS1000M PT1 : 1993 WD/BS1000M PT1 : 1993 .
BS EN ISO 8502-4:2000 BS EN ISO 8502-4:2000. Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Guidance on the estimat
BS EN ISO 8502-2:2000 BS EN ISO 8502-2:2000. Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Laboratory determinatio
BS EN ISO 8502-3:2000 BS EN ISO 8502-3:2000. Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Assessment of dust on s
BS 4008:1991 BS 4008:1991. Specification for cattle grids
BS EN 60095-1:1993 BS EN 60095-1:1993. Lead-acid starter batteries. General requirements and methods of test
BS 5075-3:1985 BS 5075-3:1985. Concrete admixtures. Specification for superplasticizing admixtures
BS 5075-1:1982 BS 5075-1:1982. Concrete admixtures. Specification for accelerating admixtures, retarding admixtures and water reducing admixtures
BS 2TA 6:1973 BS 2TA 6:1973. Specification for sheet and strip of commercially pure titanium (tensile strength 570-730 N/mm2)
BS EN ISO 2860:2001 BS EN ISO 2860:2001. Earth-moving machinery. Minimum access dimensions
WD/ISO/ASTM51939 : 2002 EDTN 1 WD/ISO/ASTM51939 : 2002 EDTN 1. ISO/ASTM51939 : 2002 Practice for blood irradiation dosimetry
BS 3A 100:1991 BS 3A 100:1991. Specification for general requirements for bolts and free running nuts of tensile strength not exceeding 1249 MPa
BS EN 969:1996 BS EN 969:1996. Specification for ductile iron pipes, fittings, accessories and their joints for gas pipelines. Requirements and test methods
BS L 164:1978 BS L 164:1978. Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, S
BS EN ISO 12193:2000 BS EN ISO 12193:2000. Animal and vegetable fats and oils. Determination of lead content. Graphite furnace atomic absorption method
BS EN 60335-2-4:1995, IEC 60335-2-4:1993 BS EN 60335-2-4:1995, IEC 60335-2-4:1993. Specification for safety of household and similar electrical appliances. Particular requirements. Spin extractors. Se
BS EN 60601-2-25:1996, IEC 60601-2-25:1993 BS EN 60601-2-25:1996, IEC 60601-2-25:1993. Medical electrical equipment. Particular requirements for safety. Specification for electrocardiographs
BS EN ISO 1628-3:2000 BS EN ISO 1628-3:2000. Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers. Polyethylenes and polypropylenes
BS EN 270:1995 BS EN 270:1995. Respiratory protective devices. Compressed air line breathing apparatus incorporating a hood. Requirements, testing, marking
BS EN ISO 8537:1995 BS EN ISO 8537:1995. Sterile, single-use syringes, with or without needle, for insulin
BS 4443-1:1988 BS 4443-1:1988. Methods of test for flexible cellular materials. Method 4. Measurement of cell count
BS 4443-4:1989 BS 4443-4:1989. Methods of test for flexible cellular materials. Method 10. Determination of solvent swelling
BS EN 61252:1997, IEC 61252:1993 BS EN 61252:1997, IEC 61252:1993. Electroacoustics. Specifications for personal sound exposure meters
BS EN 60249-2-6:1994, IEC 60249-2-6:1985 BS EN 60249-2-6:1994, IEC 60249-2-6:1985. Specifications. Specification No.6. Phenolic cellulose paper copper-clad laminated sheet of defined flammability (hor
BS EN 60249-2-7:1994, IEC 60249-2-7:1987 BS EN 60249-2-7:1994, IEC 60249-2-7:1987. Specifications. Specification No.7. Phenolic cellulose paper copper-clad laminated sheet of defined flammability (ver
BS EN 60249-2-9:1994, IEC 60249-2-9:1987 BS EN 60249-2-9:1994, IEC 60249-2-9:1987. Specifications. Epoxide cellulose paper core, epoxide glass cloth surfaces copper-clad laminated sheet of defined fla
BS EN 60249-2-10:1994, IEC 60249-2-10:1987 BS EN 60249-2-10:1994, IEC 60249-2-10:1987. Specifications. Epoxide non-woven/woven glass reinforced copper-clad laminated sheet of defined flammability (ver
BS EN 60249-2-11:1994, IEC 60249-2-11:1987 BS EN 60249-2-11:1994, IEC 60249-2-11:1987. Specifications. Specification for thin epoxide woven glass fabric copper-clad laminated sheet, general purpose gr
BS EN 60249-2-12:1994, IEC 60249-2-12:1987 BS EN 60249-2-12:1994, IEC 60249-2-12:1987. Specifications. Thin epoxide woven glass fabric copper-clad laminated sheet of defined flammability, for use in t
BS EN 60249-2-16:1993, IEC 60249-2-16:1992 BS EN 60249-2-16:1993, IEC 60249-2-16:1992. Specifications. Specification No. 16. Polyimide woven glass fabric copper-clad laminated sheet of defined flammab
BS EN 60249-2-17:1993, IEC 60249-2-17:1992 BS EN 60249-2-17:1993, IEC 60249-2-17:1992. Specifications. Specification No. 17. Thin polyimide woven glass fabric copper-clad laminated sheet of defined fl
BS EN 60249-2-18:1993, IEC 60249-2-18:1992 BS EN 60249-2-18:1993, IEC 60249-2-18:1992. Specifications. Specification No. 18. Bismaleimide/triazine modified epoxide woven glass fabric copper-clad lamin
BS 6118:1981 BS 6118:1981. Specification for multi-trip glass bottles for beer and cider
BS 2482:1981 BS 2482:1981. Specification for timber scaffold boards
BS EN ISO 8294:2000 BS EN ISO 8294:2000. Animal and vegetable fats and oils. Determination of copper, iron and nickel contents. Graphite furnace atomic absorption method
BS EN ISO 9832:2000 BS EN ISO 9832:2000. Animal and vegetable fats and oils. Determination of residual technical hexane content
SPECIAL BSENISO9004 : 2000 SPECIAL BSENISO9004 : 2000.
BS 4193-1:1993, ISO 1832:1991 BS 4193-1:1993, ISO 1832:1991. Hardmetal insert tooling. Specification for designation of indexable inserts for cutting tools
BS EN 61000-3-2:1995, IEC 61000-3-2:1995 BS EN 61000-3-2:1995, IEC 61000-3-2:1995. Electromagnetic compatibility (EMC). Limits. Limits for harmonic current emissions (equipment input current ≤ 16 A pe
BS EN 60352-4:1995, IEC 60352-4:1994 BS EN 60352-4:1995, IEC 60352-4:1994. Solderless connections. Solderless non-accessible insulation displacement connections. General requirements, test methods and
BS EN 60127-2:1991 BS EN 60127-2:1991. Miniature fuses. Specification for cartridge fuse-links
BS EN 60947-7-1:1992 BS EN 60947-7-1:1992. Specification for low-voltage switchgear and controlgear. Ancillary equipment. Terminal blocks for copper conductors
BS QC 300701:1993, IEC 60384-9-1:1988 BS QC 300701:1993, IEC 60384-9-1:1988. Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank
BS EN 60317-0-5:1995, IEC 60317-0-5:1992 BS EN 60317-0-5:1995, IEC 60317-0-5:1992. Specification for particular types of winding wires. General requirements. Glass-fibre braided, bare or enamelled rec
BS 4-1:1993 BS 4-1:1993. Structural steel sections. Specification for hot-rolled sections
BS 5385-2:1991 BS 5385-2:1991. Wall and floor tiling. Code of practice for the design and installation of external ceramic wall tiling and mosaics (including terra cotta and faience tiles)
BS 5502-75:1993 BS 5502-75:1993. Buildings and structures for agriculture. Code of practice for the design and construction of forage stores
BS 5502-50:1993 BS 5502-50:1993. Buildings and structures for agriculture. Code of practice for design, construction and use of storage tanks and reception pits for livestock slurry
BS 5502-21:1990 BS 5502-21:1990. Buildings and structures for agriculture. Code of practice for selection and use of construction materials
BS EN 60811-1-2:1995, IEC 60811-1-2:1985 BS EN 60811-1-2:1995, IEC 60811-1-2:1985. Insulating and sheathing materials of electric cables. Common test methods. General application. Thermal ageing metho
BS EN ISO 4611:2001 BS EN ISO 4611:2001. Plastics. Determination of the effects of exposure to damp heat, water spray and salt mist
BS 6155:1990 BS 6155:1990. Specification for tracheal tubes for large animals in veterinary anaesthesia
BS 7143:1989 BS 7143:1989. Specification for catheter mounts (flexible adaptors) for use with medical breathing systems
BS EN ISO 6683:2000, BS 6912-29:2000 BS EN ISO 6683:2000, BS 6912-29:2000. Earth-moving machinery. Seat belts and seat belt anchorages
BS EN 60335-2-8:1996 BS EN 60335-2-8:1996. Specification for safety of household and similar electrical appliances. Particular requirements. Shavers, hair clippers and similar appliances
DD ENV ISO 8502-1:2001 DD ENV ISO 8502-1:2001. Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Field test for solubl
BS EN ISO 1518:2001 BS EN ISO 1518:2001. Paints and varnishes. Scratch test
BS 6366:1983 BS 6366:1983. Specification for studs for rugby football boots
BS EN 61131-2:1995 BS EN 61131-2:1995. Programmable controllers. Equipment requirements and tests
BS EN 60269-4:1996, BS 88-4:1988 BS EN 60269-4:1996, BS 88-4:1988. Low-voltage fuses. Supplementary requirements for fuse-links for the protection of semiconductor devices
BS EN 60335-2-65:1996 BS EN 60335-2-65:1996. Specification for safety of household and similar electrical appliances. Particular requirements. Air-cleaning appliances
BS EN 60335-2-32:1996, IEC 60335-2-32:1993 BS EN 60335-2-32:1996, IEC 60335-2-32:1993. Specification for safety of household and similar electrical appliances. Particular requirements for massage appl
BS 3320:1988 BS 3320:1988. Method for determination of slippage resistance of yarns in woven fabrics: seam method
BS 1453:1972 BS 1453:1972. Specification for filler materials for gas welding
BS 6548-1:1984, IEC 60706-1:1982 BS 6548-1:1984, IEC 60706-1:1982. Maintainability of equipment. Guide to specifying and contracting for maintainability
BS EN ISO 7153-1:2001, BS 5194-1:1991 BS EN ISO 7153-1:2001, BS 5194-1:1991. Surgical instruments. Metallic materials. Stainless steel
BS EN ISO 10477:1996 BS EN ISO 10477:1996. Dentistry. Polymer-based crown and bridge materials
BS 2767:1991 BS 2767:1991. Specification for manually operated copper alloy valves for radiators
BS 5385-4:1992 BS 5385-4:1992. Wall and floor tiling. Code of practice for tiling and mosaics in specific conditions
BS 5385-1:1995 BS 5385-1:1995. Wall and floor tiling. Code of practice for the design and installation of internal ceramic and natural stone wall tiling and mosaics in normal conditions
BS EN 60335-2-2:1996 BS EN 60335-2-2:1996. Specification for safety of household and similar electrical appliances. Particular requirements for vacuum cleaners and water suction cleaning appliances. V
BS EN ISO 7837:2001 BS EN ISO 7837:2001. Fertilizers. Determination of bulk density (loose) of fine-grained fertilizers
BS 5911-200:1994 BS 5911-200:1994. Precast concrete pipes, fittings and ancillary products. Specification for unreinforced and reinforced manholes and soakaways of circular cross section
BS 5385-3:1989 BS 5385-3:1989. Wall and floor tiling. Code of practice for the design and installation of ceramic floor tiles and mosaics
BS 746:1987 BS 746:1987. Specification for gas meter unions and adaptors
BS 6172:1990 BS 6172:1990. Specification for installation of domestic gas cooking appliances (1st, 2nd and 3rd family gases)
BS EN 28662-5:1995 BS EN 28662-5:1995. Hand-held portable power tools. Measurement of vibrations at the handle. Pavement breakers and hammers for construction work
BS EN 28846:1993 BS EN 28846:1993. Small craft. Electrical devices. Protection against ignition of surrounding flammable gases
BS EN 61047:1993, IEC 61047:1991 BS EN 61047:1993, IEC 61047:1991. Specification for d.c. or a.c. supplied electronic step-down convertors for filament lamps. Performance requirements
BS 4433-1:1994 BS 4433-1:1994. Domestic solid mineral fuel fired boilers with rated output up to 45 kW. Domestic solid mineral fuel fired boilers with rated output up to 45 kw. Specification for boile
BS EN 29775:1993 BS EN 29775:1993. Small craft. Remote steering systems for single outboard motors of 15 kW to 40 kW power
BS EN 28848:1993 BS EN 28848:1993. Small craft. Remote steering systems
BS 5410-2:1978 BS 5410-2:1978. Code of practice for oil firing. Installations of 45 kW and above output capacity for space heating, hot water and steam supply services
BS 4433-2:1994 BS 4433-2:1994. Domestic solid mineral fuel fired boilers with rated output up to 45 kW. Specification for gravity feed boilers designed to burn small anthracite
BS EN 1235:1995 BS EN 1235:1995. Solid fertilizers. Test sieving
BS 6256:1989 BS 6256:1989. Specification for paper for steam sterilization paper bags, pouches and reels for medical use
BS 5645:1987, ISO 76-1987 BS 5645:1987, ISO 76-1987. Specification for static load ratings for rolling bearings
BS QC 400600:1990, IEC 60115-8:1989 BS QC 400600:1990, IEC 60115-8:1989. Harmonized system of quality assessment for electronic components. Fixed resistors for use in electronic equipment. Sectional s
BS EN 552:1994 BS EN 552:1994. Sterilization of medical devices. Validation and routine control of sterilization by irradiation
BS 5482-2:1977 BS 5482-2:1977. Domestic butane- and propane-gas-burning installations. Installations in caravans and non-permanent dwellings
BS EN 60517:1997, IEC 60517:1990 BS EN 60517:1997, IEC 60517:1990. Gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above
BS ISO 5800:1987 BS ISO 5800:1987. Photography. Colour negative films for still photography. Determination of ISO speed
BS EN 60168:1995, IEC 60168:1994 BS EN 60168:1995, IEC 60168:1994. Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000V
BS EN ISO 2495:2001, BS 283:1995 BS EN ISO 2495:2001, BS 283:1995. Specification for iron blue pigments
BS EN 50086-2-4:1994 BS EN 50086-2-4:1994. Specification for conduit systems for cable management. Particular requirements. Conduit systems buried underground
BS EN 60249-2-14:1994, IEC 60249-2-14:1988 BS EN 60249-2-14:1994, IEC 60249-2-14:1988. Specifications. Phenolic cellulose paper copper-clad laminated sheet of defined flammability (vertical burning te
BS EN 60811-1-3:1995 BS EN 60811-1-3:1995. Insulating and sheathing materials of electric cables. Common test methods. General application. Methods for determining the density. Water absorption tests.
BS EN 60811-3-1:1995, IEC 60811-3-1:1985 BS EN 60811-3-1:1995, IEC 60811-3-1:1985. Insulating and sheathing materials of electric cables. Common test methods. Methods specific to PVC compounds. Pressu
BS EN 60920:1991 BS EN 60920:1991. Ballasts for tubular fluorescent lamps. General and safety requirements
BS EN 29241-3:1993, ISO 9241-3:1992 BS EN 29241-3:1993, ISO 9241-3:1992. Ergonomic requirements for office work with visual display terminals (VDTs). Visual display requirements
BS 6160-8:1994, IEC 60489-8:1984 BS 6160-8:1994, IEC 60489-8:1984. Radio equipment used in mobile services. Methods of measurement for antennas
BS 903-A26:1995, ISO 48:1994 BS 903-A26:1995, ISO 48:1994. Physical testing of rubber. Method for determination of hardness (hardness between 10 IRHD and 100 IRHD)
BS 6652:1989 BS 6652:1989. Specification for packagings resistant to opening by children
BS EN 60969:1993 BS EN 60969:1993. Self-ballasted lamps for general lighting services. Performance requirements
BS EN 61010-1:1993 BS EN 61010-1:1993. Safety requirements for electrical equipment for measurement, control and laboratory use. General requirements
BS EN 61000-4-5:1995, IEC 61000-4-5:1995 BS EN 61000-4-5:1995, IEC 61000-4-5:1995. Electromagnetic compatibility (EMC). Testing and measurement techniques. Surge immunity test
BS 8002:1994 BS 8002:1994. Code of practice for earth retaining structures
BS EN 196000:1993 BS EN 196000:1993. Harmonized system of quality assessment for electronic components. Generic specification. Electromechanical switches
BSISO/IEC10918 PT2 : 1995 (TEXT) BSISO/IEC10918 PT2 : 1995 (TEXT).
BSISO/IEC10918 PT2 : 1995 (set 3 disks) BSISO/IEC10918 PT2 : 1995 (set 3 disks).
BS EN 61000-4-2:1995, IEC 61000-4-2:1995 BS EN 61000-4-2:1995, IEC 61000-4-2:1995. Electromagnetic compatibility (EMC). Testing and measurement techniques. Electrostatic discharge immunity test. Basic
BS EN 28662-2:1995 BS EN 28662-2:1995. Hand-held portable power tools. Measurement of vibrations at the handle. Chipping hammers and riveting hammers
BS EN 60976:2001, BS 5724-3.1:1990,IEC 60976:1989 BS EN 60976:2001, BS 5724-3.1:1990,IEC 60976:1989. Medical electrical equipment. Medical electron accelerators. Functional performance characteristics
BS EN 60034-7:1993, IEC 60034-7:1992 BS EN 60034-7:1993, IEC 60034-7:1992. Rotating electrical machines. Classification of types of constructions and mounting arrangements (IM Code)
BS EN 60099-1:1994, IEC 60099-1:1991 BS EN 60099-1:1994, IEC 60099-1:1991. Surge arresters. Non-linear resistor type gapped surge arrestors for a.c. systems
BS EN 61000-4-10:1994, IEC 61000-4-10:1993 BS EN 61000-4-10:1994, IEC 61000-4-10:1993. Electromagnetic compatibility (EMC). Testing and measurement techniques. Damped oscillatory magnetic field immuni
BS ISO 6107-8:1993 BS ISO 6107-8:1993. Water quality. Vocabulary. Part 8
BS EN 60898:1991 BS EN 60898:1991. Specification for circuit-breakers for overcurrent protection for household and similar installations
BS EN 61000-4-12:1996, IEC 61000-4-12:1995 BS EN 61000-4-12:1996, IEC 61000-4-12:1995. Electromagnetic compatibility (EMC). Testing and measurement techniques. Oscillatory waves immunity test. Basic E
BS EN 61000-4-8:1994, IEC 61000-4-8:1993 BS EN 61000-4-8:1994, IEC 61000-4-8:1993. Electromagnetic compatibility (EMC). Testing and measurement techniques. Power frequency magnetic field immunity test
BS 4482:1985 BS 4482:1985. Specification for cold reduced steel wire for the reinforcement of concrete
BS EN ISO 8504-3:2001, BS 7079-D3:1993 BS EN ISO 8504-3:2001, BS 7079-D3:1993. Preparation of steel substrates before application of paints and related products. Surface preparation methods. Hand- and
BS EN 28662-3:1995 BS EN 28662-3:1995. Hand-held portable power tools. Measurement of vibrations at the handle. Rock drills and rotary hammers
BS EN 61000-4-9:1994, IEC 61000-4-9:1993 BS EN 61000-4-9:1994, IEC 61000-4-9:1993. Electromagnetic compatibility (EMC). Testing and measurement techniques. Pulse magnetic field immunity test. Basic EM
BS EN ISO 2556:2001 BS EN ISO 2556:2001. Plastics. Determination of the gas transmission rate of films and thin sheets under atmospheric pressure. Manometric method
BS EN 60950:1992, BS 7002:1992 BS EN 60950:1992, BS 7002:1992. Specification for safety of information technology equipment, including electrical business equipment
BS 4370-2:1993 BS 4370-2:1993. Methods of test for rigid cellular materials. Methods 7 to 9
BS EN 61008-1:1995 BS EN 61008-1:1995. Specification for residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs). General rules
BS 594-1:1992 BS 594-1:1992. Hot rolled asphalt for roads and other paved areas. Specification for constituent materials and asphalt mixtures
BS ISO/IEC 10367:1991 BS ISO/IEC 10367:1991. Information technology. Standardized coded graphic character sets for use in 8-bit codes
BS EN 60674-2:1998 BS EN 60674-2:1998. Specification for plastic films for electrical purposes. Methods of test
BS EN 60264-2-1:1996, IEC 60264-2-1:1989 BS EN 60264-2-1:1996, IEC 60264-2-1:1989. Packaging for winding wires. Cylindrical barrelled delivery spools. Basic dimensions
BS EN 196500:1993 BS EN 196500:1993. Harmonized system of quality assessment for electronic components. Sectional specification. Membrane switches including blank detail specification EN 196501
BS 469:1995 BS 469:1995. Specification for railway signalling lamps
BS 594-2:1992 BS 594-2:1992. Hot rolled asphalt for roads and other paved areas. Specification for the transport, laying and compaction of rolled asphalt
BS EN 512:1995 BS EN 512:1995. Fibre-cement products. Pressure pipes and joints
BS EN 60998-1:1993 BS EN 60998-1:1993. Connecting devices for low-voltage circuits for household and similar purposes. General requirements
BS EN 61095:1993 BS EN 61095:1993. Specification for electromechanical contactors for household and similar purposes
BS EN 55020:1995 BS EN 55020:1995. Electromagnetic immunity of broadcast receivers and associated equipment
BS EN ISO 9626:1995 BS EN ISO 9626:1995. Stainless steel needle tubing for the manufacture of medical devices
BS EN 170:1992 BS EN 170:1992. Specification for ultraviolet filters used in personal eye-protection equipment
BS 4778-3.2:1991, IEC 60050-191:1990 BS 4778-3.2:1991, IEC 60050-191:1990. Quality vocabulary. Availability, reliability and maintainability terms. Glossary of international terms. 3.2 glossay of inte
BS EN 132400:1995 BS EN 132400:1995. Harmonized system of quality assessment for electronic components. Sectional specification. Fixed capacitors for electromagnetic interference suppression and conne
BS EN ISO 182-4:2000 BS EN ISO 182-4:2000. Plastics. Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any oth
BS 7448-1:1991 BS 7448-1:1991. Fracture mechanics toughness tests. Method for determination of KIc, critical CTOD and critical J values of metallic materials
BS EN 60730-2-2:1992 BS EN 60730-2-2:1992. Specification for automatic electrical controls for household and similar use. Particular requirements. Thermal motor protectors. Section 2.2: Thermal motors
BS EN 60730-2-6:1995 BS EN 60730-2-6:1995. Specification for automatic electrical controls for household and similar use. Particular requirements. Automatic electrical pressure sensing controls includ
BS EN 60730-2-8:1995 BS EN 60730-2-8:1995. Specification for automatic electrical controls for household and similar use. Particular requirements. Electrically operated water valves, including mechani
BS 3F 71:1991 BS 3F 71:1991. Specification for light duty braided rubber cord
BS 3F 70:1991 BS 3F 70:1991. Specification for heavy duty braided rubber cord
BS EN ISO 182-3:2000 BS EN ISO 182-3:2000. Plastics. Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any oth
BS ISO 5725-3:1994 BS ISO 5725-3:1994. Accuracy (trueness and precision) of measurement methods and results. Intermediate measures of the precision of a standard measurement method
BS EN 993-2:1995, BS 1902-3.4:1995 BS EN 993-2:1995, BS 1902-3.4:1995. Methods of test for dense shaped refractory products. Determination of true density
BS EN 60264-2-3:1996, IEC 60264-2-3:1990 BS EN 60264-2-3:1996, IEC 60264-2-3:1990. Packaging of winding wires. Cylindrical barrelled delivery spools. Specification for non-returnable spools made from
BS EN 60264-3-3:1996, IEC 60264-3-3:1990 BS EN 60264-3-3:1996, IEC 60264-3-3:1990. Packaging of winding wires. Taper barrelled delivery spools. Specification for non-returnable spools made from thermo
BS 3202-2:1991 BS 3202-2:1991. Laboratory furniture and fittings. Specification for performance
BS L 163:1978 BS L 163:1978. Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated, cold worked for flattening and aged at room tem
BS L 165:1978 BS L 165:1978. Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8,
BS L 167:1978 BS L 167:1978. Specification for close toleranced sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4,
BS L 166:1978 BS L 166:1978. Specification for close toleranced sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (
BS EN 29917:1994, ISO 9917:1991 BS EN 29917:1994, ISO 9917:1991. Specification for dental water-based cements
BS EN ISO 216:2001 BS EN ISO 216:2001. Writing paper and certain classes of printed matter. Trimmed sizes. A and B series
BS EN 60335-1:1995 BS EN 60335-1:1995. Specification for safety of household and similar electrical appliances. General requirements
BS ISO 5725-6:1994 BS ISO 5725-6:1994. Accuracy (trueness and precision) of measurement methods and results. Use in practice of accuracy values
BS ISO 8127-1:1989 BS ISO 8127-1:1989. Micrographics. A6 size microfilm jackets. Five-channel jacket for 16 mm microfilm
BS EN 61000-4-11:1994 BS EN 61000-4-11:1994. Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests
BS EN 60811-1-1:1995 BS EN 60811-1-1:1995. Insulating and sheathing materials of electric cables. Common test methods. General application. Measurement of thickness and overall dimensions. Tests for d
BS 2000-317:1995 BS 2000-317:1995. Methods of test for petroleum and its products. Determination of residues in liquefied petroleum gases. Low temperature evaporation method
BS EN 61000-4-4:1995, IEC 61000-4-4:1995 BS EN 61000-4-4:1995, IEC 61000-4-4:1995. Electromagnetic compatibility (EMC). Testing and measurement techniques. Electrical fast transient/burst immunity tes
BS EN 61204:1995 BS EN 61204:1995. Low-voltage power supply devices, d.c. output. Performance characteristics and safety requirements
BS 6493-1.4:1992, IEC 60747-4:1991 BS 6493-1.4:1992, IEC 60747-4:1991. Semiconductor devices. Discrete devices. Recommendations for microwave diodes and transistors. Recommendations for microwave devi
BS EN 60925:1991 BS EN 60925:1991. Specification for performance requirements for d.c. supplied electronic ballasts for tubular fluorescent lamps
BS EN 60855:1997 BS EN 60855:1997. Insulating foam-filled tubes and solid rods for live working
BS 7822-1:1995, IEC 60664-1:1992 BS 7822-1:1995, IEC 60664-1:1992. Insulation coordination for equipment within low-voltage systems. Principles, requirements and tests
PD ISO/TR 10200:1990 PD ISO/TR 10200:1990. Legal admissibility of microforms
BS 6493-2.1:1985, IEC 60748-1:1984 BS 6493-2.1:1985, IEC 60748-1:1984. Semiconductor devices. Integrated circuits. General
BS EN 60811-1-4:1995, IEC 60811-1-4:1985 BS EN 60811-1-4:1995, IEC 60811-1-4:1985. Insulating and sheathing materials of electric cables. Common test methods. General application. Tests at low tempera
BS7255 : 2001 (UPDATED POCKET BOOK A6) BS7255 : 2001 (UPDATED POCKET BOOK A6).
BS EN 60832:1997 BS EN 60832:1997. Specification for insulating poles (insulating sticks) and universal tool attachments (fittings) for live working
BSEN62079 : 2001(diskette of annex B&C) BSEN62079 : 2001(diskette of annex B&C).
BS 5328-3:1990 BS 5328-3:1990. Concrete. Specification for the procedures to be used in producing and transporting concrete
BS EN 60269-2:1995, BS 88-2.1:1988,IEC 60269-2:1986 BS EN 60269-2:1995, BS 88-2.1:1988,IEC 60269-2:1986. Low-voltage fuses. Supplementary requirements for fuses for use by authorized persons (fuses ma
BS EN 61058-2-1:1993 BS EN 61058-2-1:1993. Switches for appliances. Particular requirements. Cord switches
BS EN 61058-2-5:1995, IEC 61058-2-5:1994 BS EN 61058-2-5:1995, IEC 61058-2-5:1994. Switches for appliances. Particular requirements. Change-over selectors
BS EN 61230:1996 BS EN 61230:1996. Live working. Portable equipment for earthing or earthing and short-circuiting
BS 7806:1995 BS 7806:1995. Dry-type power transformers
BS EN 61236:1995 BS EN 61236:1995. Saddles, pole clamps (stick clamps) and accessories for live working
BS EN 60289:1995 BS EN 60289:1995. Reactors
BS EN 60900:1994 BS EN 60900:1994. Hand tools for live working up to 1000 V a.c. and 1500 V d.c.
BS ISO 5725-2:1994 BS ISO 5725-2:1994. Accuracy (trueness and precision) of measurement methods and results. Basic methods for the determination of repeatability and reproducibility of a standard meas
WD/BS1000M PT2 : 1993 WD/BS1000M PT2 : 1993 .
WD/BS1000M PT2 : 1993 (binder) WD/BS1000M PT2 : 1993 (binder).
BS 2000-168:1995 BS 2000-168:1995. Methods of test for petroleum and its products. Determination of rolling bearing performance of lubricating grease
BS EN 60984:1993 BS EN 60984:1993. Specification for sleeves of insulating material for live working
BS EN 61331-1:2002 BS EN 61331-1:2002. Protective devices against diagnostic medical X-radiation. Determination of attenuation properties of materials
BS EN 61331-2:2002 BS EN 61331-2:2002. Protective devices against diagnostic medical X-radiation. Protective glass plates
BS 1377-4:1990 BS 1377-4:1990. Methods of test for soils for civil engineering purposes. Compaction-related tests
BS EN 717-2:1995 BS EN 717-2:1995. Wood-based panels. Determination of formaldehyde release. Formaldehyde release by the gas analysis method
BS 638-5:1988 BS 638-5:1988. Arc welding power sources, equipment and accessories. Specification for accessories
BS 7520:1995, IEC 61318:1994 BS 7520:1995, IEC 61318:1994. Guide to quality assurance plans for tools for live working
BS EN 62262:2002 BS EN 62262:2002. Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
BS AU 262-1:1995, ISO 6550-1:1994 BS AU 262-1:1995, ISO 6550-1:1994. Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing. M14 x 1, 25 glow-plugs
BS EN 61235:1995 BS EN 61235:1995. Live working. Insulating hollow tubes for electrical purposes
BS AU 262-2:1995, ISO 6550-2:1994 BS AU 262-2:1995, ISO 6550-2:1994. Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing. M12 x 1.25 glow-plugs
BS 7117-1:1991 BS 7117-1:1991. Metering pumps and dispensers to be installed at filling stations and used to dispense liquid fuel. Specification for construction
BS 7697:1993 BS 7697:1993. Nominal voltages for low voltage public electricity supply systems
BS 4272-2:1996 BS 4272-2:1996. Anaesthetic and analgesic machines. Specification for intermittent (demand) flow analgesic machines for use with 50/50% (V/V) nitrous oxide and oxygen
BS EN ISO 4628-6:2001, BS 3900-H6:1991 BS EN ISO 4628-6:2001, BS 3900-H6:1991. Paints and varnishes. Evaluation of degradation of paint coatings. Designation of intensity, quantity and size of common
BS EN 60062:1994 BS EN 60062:1994. Marking codes for resistors and capacitors
BS EN 60335-2-9:1996 BS EN 60335-2-9:1996. Specification for safety of household and similar electrical appliances. Particular requirements. Toasters, grills, roasters and similar appliances
BS EN 60730-2-10:1995 BS EN 60730-2-10:1995. Specification for automatic electrical controls for household and similar use. Particular requirements. Motor starting relays
BS 903-A63:1995, ISO 3387:1994 BS 903-A63:1995, ISO 3387:1994. Physical testing of rubber. Method for determination of crystallization effects by hardness measurements
BS 5400-1:1988 BS 5400-1:1988. Steel, concrete and composite bridges. General statement
BS 7566-4:1992 BS 7566-4:1992. Installation of factory-made chimneys to BS 4543 for domestic appliances. Recommendations for installation design and installation
BS 5S 100:1993 BS 5S 100:1993. Procedure for inspection, testing and acceptance of wrought steels (other than plate, sheet, strip and tube)
BS 5724-3.1:Supplement No. 1:1990, IEC 60977:1989 BS 5724-3.1:Supplement No. 1:1990, IEC 60977:1989. Medical electrical equipment. Particular requirements for performance. Methods of declaring functio
BS 5395-3:1985 BS 5395-3:1985. Stairs, ladders and walkways. Code of practice for the design of industrial type stairs, permanent ladders and walkways
BS 4592-4:1992 BS 4592-4:1992. Industrial type flooring, walkways and stair treads. Specification for glass reinforced plastics open bar gratings
BS 4592-5:1995 BS 4592-5:1995. Industrial type flooring, walkways and stair treads. Specification for solid plates in steel, aluminium and glass reinforced plastics
BS 4592-2:1987 BS 4592-2:1987. Industrial type flooring, walkways and stair treads. Specification for expanded metal grating panels
BS 4592-3:1987 BS 4592-3:1987. Industrial type flooring, walkways and stair treads. Specification for cold formed planks
BS 4592-1:1995 BS 4592-1:1995. Industrial type flooring, walkways and stair treads. Specification for open bar gratings
BS 6493-1.5:1992, IEC 60747-5:1992 BS 6493-1.5:1992, IEC 60747-5:1992. Semiconductor devices. Discrete devices. Recommendations for optoelectronic devices. Section 5: Recommendations for optoelectroni
BS 915-2:1972 BS 915-2:1972. Specification for high alumina cement. Metric units
BS 3951-2.1:1991, ISO 1496-1:1990 BS 3951-2.1:1991, ISO 1496-1:1990. Freight containers. Specification and testing of series 1 freight containers. General cargo containers for general purposes
BS ISO 1496-3:1995 BS ISO 1496-3:1995. Series 1 Freight containers. Specification and testing. Tank containers for liquids, gases and pressurized dry bulk
BS EN 60730-2-4:1993 BS EN 60730-2-4:1993. Specification for automatic electrical controls for household and similar use. Particular requirements. Thermal motor protectors for motor-compressors of her
BS EN 60904-6:1995, IEC 60904-6:1994 BS EN 60904-6:1995, IEC 60904-6:1994. Photovoltaic devices. Requirements for reference solar modules
BS EN ISO 8501-1:Supplement:2001, BS 7079-A1:Supplement 1:1996 BS EN ISO 8501-1:Supplement:2001, BS 7079-A1:Supplement 1:1996. Preparation of steel substrates before application of paints and related
BS EN ISO 8501-2:2001, BS 7079-A2:1996 BS EN ISO 8501-2:2001, BS 7079-A2:1996. Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanline
BS EN 60127-1:1991 BS EN 60127-1:1991. Miniature fuses. Definitions for miniature fuses and general requirements for miniature fuse-links
BS S 524:1969 BS S 524:1969. Specification for cold-rolled 18/10 chromium-nickel corrosion-resisting steel sheet and strip (titanium stabilized: 800 MPa)
BS S 536:1970 BS S 536:1970. Specification for low carbon 18/10 chromium-nickel corrosion-resisting steel sheet and strip (500 MPa)
BS S 535:1969 BS S 535:1969. Specification for chromium-molybdenum steel sheet and strip (1150/1300 Mpa) (suitable for welding)
BS S 534:1969 BS S 534:1969. Specification for chromium-molybdenum steel sheet and strip (880/1080 MPa (suitable for welding)
BS S 525:1969 BS S 525:1969. Specification for cold-rolled 18/10 chromium-nickel corrosion-resisting steel sheet and strip (niobium stabilized: 800 MPa)
BS S 526:1969 BS S 526:1969. Specification for softened 18/10 chromium-nickel corrosion-resisting steel sheet and strip (titanium stabilized: 540 MPa)
BS S 533:1969 BS S 533:1969. Specification for chromium-nickel-copper-molybdenum corrosion-resisting steel sheet and strip (precipitation hardening: 1180/1370 MPa)
BS S 532:1969 BS S 532:1969. Specification for chromium-nickel-copper-molybdenum corrosion-resisting steel sheet and strip (precipitation hardening: 980/1180 MPa)
BS S 527:1969 BS S 527:1969. Specification for softened 18/10 chromium-nickel corrosion-resisting steel sheet and strip (niobium stabilized: 540 MPa)
BS S 530:1970 BS S 530:1970. Specification for 24/17 chromium-nickel heat-resisting steel sheet and strip (titanium stabilized: 540 MPa) (elevated temperature properties not verified)
BS 2S 510:1970 BS 2S 510:1970. Specification for carbon steel sheet and strip (430/540 MPa) (suitable for welding)
BS 2S 513:1970 BS 2S 513:1970. Specification for spring steel strip
BS S 537:1970 BS S 537:1970. Specification for low carbon 17/12 chromium-nickel-molybdenum corrosion-resisting steel sheet and strip (500 MPa)
BS 3S 132:1976 BS 3S 132:1976. Specification. 3% chromium-molybdenum-vanadium steel billets, bars, forgings and parts (1320-1470 MPa: limiting ruling section 70 mm) (suitable for nitriding)
BS 2S 515:1969 BS 2S 515:1969. Specification for carbon-manganese steel sheet and strip (softened) (for use in the softened condition: 460/600 MPa) (suitable for welding)
BS 2S 514:1969 BS 2S 514:1969. Specification for carbon-manganese steel sheet and strip (for use in the hardened and tempered condition: 770/1000 MPa) (suitable for welding)
BS 5S 82:1976 BS 5S 82:1976. Specification. 4% nickel-chromium-molybdenum case-hardening steel billets, bars, forgings and parts (1320-1520 MPa)
BS 2S 511:1970 BS 2S 511:1970. Specification for deep drawing carbon steel sheet and strip (280/400 MPa) (suitable for welding)
BS 3144:1968 BS 3144:1968. Methods of sampling and physical testing of leather
PD 2777:1994 PD 2777:1994. Fabric flammability and burning accidents
PD 6461-3:1995 PD 6461-3:1995. General metrology. Guide to the expression of uncertainty in measurement (GUM)
PD 6461-2:1980 PD 6461-2:1980. General metrology. Vocabulary of legal metrology (VLM)
PD 6461-1:1995 PD 6461-1:1995. General metrology. Basic and general terms (VIM)
BS 6765-4:1987 BS 6765-4:1987. Leisure accommodation vehicles. Caravans. Specification for undergear
BS EN 60317-12:1995 BS EN 60317-12:1995. Specifications for particular types of winding wires. Polyvinyl acetal enamelled round copper wire, class 120
BS EN 60317-30:1997, IEC 60317-30:1990 BS EN 60317-30:1997, IEC 60317-30:1990. Specifications for particular types of winding wires. Polyimide enamelled rectangular copper wire, class 220
BS EN 60317-31:1997, IEC 60317-31:1990 BS EN 60317-31:1997, IEC 60317-31:1990. Specifications for particular types of winding wires. Glass-fibre wound resin or varnish resin impregnated, bare or ename
BS EN 60317-32:1997, IEC 60317-32:1990 BS EN 60317-32:1997, IEC 60317-32:1990. Specifications for particular types of winding wires. Glass-fibre wound resin or varnish impregnated, bare or enamelled r
BS EN 60317-33:1997, IEC 60317-33:1990 BS EN 60317-33:1997, IEC 60317-33:1990. Specifications for particular types of winding wires. Glass-fibre wound resin or varnish impregnated, bare or enamelled r
BS EN 60317-39:1995, IEC 60317-39:1992 BS EN 60317-39:1995, IEC 60317-39:1992. Specifications for particular types of winding wire. Glass-fibre braided, resin or varnish impregnated, bare or enamelled
BS EN 60317-40:1995, IEC 60317-40:1992 BS EN 60317-40:1995, IEC 60317-40:1992. Specifications for particular types of winding wires. Glass-fibre braided resin or varnish impregnated, bare or enamelled
BS 7176:1995 BS 7176:1995. Specification for resistance to ignition of upholstered furniture for non-domestic seating by testing composites
BS 1902-10.2:1994 BS 1902-10.2:1994. Methods of testing refractory materials. Investment casting shell mould systems. Determination of permeability and standard air flow capacity at elevated temperatu
BS EN ISO 293:2003 BS EN ISO 293:2003. Plastics. Compression moulding test specimens of thermoplastic materials
BS EN 10242:1995 BS EN 10242:1995. Threaded pipe fittings in malleable cast iron
BS 6073-1:1981 BS 6073-1:1981. Precast concrete masonry units. Specification for precast concrete masonry units
BS 6102-3:1986 BS 6102-3:1986. Cycles. Specification for photometric and physical requirements of lighting equipment
BS EN ISO 10211-1:1996 BS EN ISO 10211-1:1996. Thermal bridges in building construction. Heat flows and surface temperatures. General calculation methods
BS EN 60317-17:1996, IEC 60317-17:1990 BS EN 60317-17:1996, IEC 60317-17:1990. Specifications for particular types of winding wire. Polyvinyl acetal enamelled rectangular copper wire, class 105
BS 2782-6:Methods 620A to 620D:1991 BS 2782-6:Methods 620A to 620D:1991. Methods of testing plastics. Dimensional properties. Determination of density and relative density of non-cellular plastics. Me
BS S 162:1990 BS S 162:1990. Specification for 18% nickel-cobalt-molybdenum maraging steel forging stock, forgings, bars and parts (1800 MPa: double vaccuum melted)
BS EN ISO 6845:2003, ISO 6845:1989 BS EN ISO 6845:2003, ISO 6845:1989. Surface active agents. Technical alkane sulfonates. Determination of mean relative molecular mass and content of the alkane monos
BS ISO 3767-2:1991 BS ISO 3767-2:1991. Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Symbols for operator controls and other displays. Symbols for agricultural t
KIT 129 KIT 129. Personal financial planning DPC kit
BS ISO 10494:1993 BS ISO 10494:1993. Gas turbines and gas turbine sets. Measurement of emitted airborne noise. Engineering/survey method
BS 7164-12:1991, ISO 2453:1991 BS 7164-12:1991, ISO 2453:1991. Chemical tests for raw and vulcanized rubber. Determination of bound styrene content of raw styrene-butadiene rubber; emulsion polymerize
BS 2TA 21:1973 BS 2TA 21:1973. Specification for sheet and strip of titanium-copper alloy (tensile strength 540-700 MPa)
BS S 538:1975 BS S 538:1975. Specification for chromium-nickel-molybdenum-vanadium heat-resisting steel sheet and strip (930-1130 MPa: maximum thickness 6 mm) (Cr 12, Ni 2.5, Mo 1.7, V 0.3)
BS EN 60730-2-7:1992 BS EN 60730-2-7:1992. Specification for automatic electrical controls for household and similar use. Particular requirements. Timers and time switches
KIT 129 KIT 129.
BS 7363:1990 BS 7363:1990. Method for bead-on-plate (BOP) test for welds
BS 1427:1993 BS 1427:1993. Guide to field and on-site test methods for the analysis of waters
KIT 129 KIT 129.
BS 5588-10:1991 BS 5588-10:1991. Fire precautions in the design, construction and use of buildings. Code of practice for shopping complexes
BS 3456:Part 2:Section 2.34:1976 BS 3456:Part 2:Section 2.34:1976. Specification for safety of household electrical appliances. Particular requirements. Room air conditioners
BS 4054:1966 BS 4054:1966. Methods for measuring and expressing the performance of radio receivers. Receivers for a.m. and f.m. sound broadcast transmissions
BS 4938-2P:1982 BS 4938-2P:1982. Dirt content of milk. Photographic standards for the method for the determination of visible dirt content of milk (rapid method)
BS 5551-4.2.2:1987 BS 5551-4.2.2:1987. Fertilizers. Chemical analysis. Determination of phosphorus. Extraction of phosphates soluble in mineral acids
BS AU 50-1.2.1:1991 BS AU 50-1.2.1:1991. Tyres and wheels. Tyres. Commercial vehicle tyres. Specifications for sizes, loads, inflation pressures and rims for commercial vehicle tyres
BS CECC 00009:1982 BS CECC 00009:1982. Harmonized system of quality assessment for electronic components. Basic specification: basic testing procedures and measuring methods for electromechanical comp
BS EN ISP 10607-2:1994 BS EN ISP 10607-2:1994. Information technology. International standardized profiles AFTnn. File transfer, access and management. Definition of document types, constraint sets an
BS EN ISP 10607-4:1994 BS EN ISP 10607-4:1994. Information technology. International standardized profiles AFTnn. File transfer, access and management. AFT12. Positional file transfer service (flat)
BS EN ISP 10607-5:1994 BS EN ISP 10607-5:1994. Information technology. International standardized profiles AFTnn. File transfer, access and management. AFT22. Positional file access service (flat)
BS EN ISP 10607-6:1994 BS EN ISP 10607-6:1994. Information technology. International standardized profiles AFTnn. File transfer, access and management. AFT3. File management service
BS QC 001005:1993 BS QC 001005:1993. IECQ Register of Approvals
PD 6460:1971 PD 6460:1971. Collected amendments to the CV7000 specifications for semiconductors adopted as British Standards (9300C series)
KIT 129 KIT 129.
BS 1922:1987 BS 1922:1987. Specification for glass dispensing measures for pharmaceutical purposes
BS S 150:1975 BS S 150:1975. Specification for chromium-molybdenum-vanadium-niobium heat-resisting steel billets, bars, forgings and parts (930-1080 MPa) (Cr 10.5, Mo 0.6, V 0.2, Nb 0.3)
BS EN 60269-3:1995, BS 88-3.1:1995,IEC 60269-3:1987 BS EN 60269-3:1995, BS 88-3.1:1995,IEC 60269-3:1987. BS Low-voltage fuses. Supplementary requirements for fuses for use by unskilled persons (fuses
BS 2S 140:1976 BS 2S 140:1976. Specification for 2 1/2% nickel-chromium-molybdenum steel billets, bars, forgings and parts (1080-1280 MPa: limiting ruling section 150 mm)
BS 5550-5.1.2:1993 BS 5550-5.1.2:1993. Cinematography. Common to more than one film gauge. Raw stock. Specification for the minimum information for the labelling of containers for raw stock motion-pic
KIT 129 KIT 129.
BS EN ISO 527-3:1996, BS 2782-3:Method 326E:1995 BS EN ISO 527-3:1996, BS 2782-3:Method 326E:1995. Plastics. Determination of tensile properties. Test conditions for films and sheets
BS 1006:B01C:LFS4:1990 BS 1006:B01C:LFS4:1990.
BS EN 60730-1:1995 BS EN 60730-1:1995. Automatic electrical controls for household and similar use. General requirements
BS 4999-145:1987 BS 4999-145:1987. General requirements for rotating electrical machines. Specification for winding terminations
BS 6048:1987, ISO 3720:1986 BS 6048:1987, ISO 3720:1986. Specification for black tea
BS 3016:1989 BS 3016:1989. Specification for pressure regulators for liquefied petroleum gases
BS EN 60439-4:1991 BS EN 60439-4:1991. Specification for low-voltage switchgear and controlgear assemblies . Particular requirements for assemblies for construction sites (ACS)
KIT 129 KIT 129.
BS EN 60264-2-2:1996, IEC 60264-2-2:1990 BS EN 60264-2-2:1996, IEC 60264-2-2:1990. Packaging of winding wires. Cylindrical barrelled delivery spools. Specification for returnable spools made from ther
BS S 152:1975 BS S 152:1975. Specification for chromium-cobalt-molybdenum-vanadium-niobium heat-resisting steel billets, bars, forgings and parts (consumable electrode remelted) (1000-1140 MPa) (Cr 10
BS EN 60811-3-2:1995, IEC 60811-3-2:1985 BS EN 60811-3-2:1995, IEC 60811-3-2:1985. Insulating and sheathing materials of electric cables. Common test methods. Methods specific to PVC compounds. Loss o
BS EN 60825-1:1994 BS EN 60825-1:1994. Safety of laser products. Equipment classification, requirements and user's guide
KIT 129 KIT 129.
BS EN 60730-2-3:1992 BS EN 60730-2-3:1992. Automatic electrical controls for household and similar use. Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps
BS EN 60730-2-15:1996, IEC 60730-2-15:1994 BS EN 60730-2-15:1996, IEC 60730-2-15:1994. Automatic electrical controls for household and similar use. Particular requirements for automatic electrical wat
BS 903-A13:1990, ISO 1432:1988 BS 903-A13:1990, ISO 1432:1988. Physical testing of rubber. Method for determination of stiffness at low temperature (Gehman test)
WD/PERSONAL FINANCIAL PLANNING DPCKIT143 WD/PERSONAL FINANCIAL PLANNING DPCKIT143.
KIT 129 KIT 129.
BS EN ISO 9920:2003 BS EN ISO 9920:2003. Ergonomics of the thermal environment. Estimation of the thermal insulation and evaporative resistance of a clothing ensemble
BS 5892-6:1992 BS 5892-6:1992. Railway rolling stock materials. Specification for wheelsets for traction and trailing stock
BS EN 61125:1993, IEC 61125:1992 BS EN 61125:1993, IEC 61125:1992. Unused hydrocarbon-based insulating liquids. Test methods for evaluating the oxidation stability
BS 11:1985 BS 11:1985. Specification for railway rails
BS 4573:1970 BS 4573:1970. Specification for 2-pin reversible plugs and shaver socket-outlets
BS ISO 9022-7:1994 BS ISO 9022-7:1994. Optics and optical instruments. Environmental test methods. Drip, rain
BS ISO 9039:1994 BS ISO 9039:1994. Optics and optical instruments. Quality evaluation of optical systems. Determination of distortion
KIT 129 KIT 129.
BS IEC 60191-2:1966 BS IEC 60191-2:1966. Mechanical standardization of semiconductor devices. Dimensions
KIT 129 KIT 129.
BS EN ISO 6383-1:2004 BS EN ISO 6383-1:2004. Plastics. Film and sheeting. Determination of tear resistance. Trouser tear method
BS EN ISO 6383-2:2004 BS EN ISO 6383-2:2004. Plastics. Film and sheeting. Determination of tear resistance. Elmendorf method
BS EN ISO 4613-2:1995 BS EN ISO 4613-2:1995. Plastics. Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials. Preparation of test specimens and determination of properties
KIT 129 KIT 129.
BS EN 2:1992 BS EN 2:1992. Classification of fires
BS EN 61543:1996 BS EN 61543:1996. Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility
KIT 129 KIT 129.
BS EN 639:1995 BS EN 639:1995. Common requirements for concrete pressure pipes including joints and fittings
BS EN 642:1995 BS EN 642:1995. Prestressed concrete pressure pipes, cylinder and non-cylinder, including joints, fittings and specific requirement for prestressing steel for pipes
BS 5588-1:1990 BS 5588-1:1990. Fire precautions in the design, construction and use of buildings. Code of practice for residential buildings
BS 5588-6:1991 BS 5588-6:1991. Fire precautions in the design, construction and use of buildings. Code of practice for places of assembly
BS 5975:1996 BS 5975:1996. Code of practice for falsework
KIT 129 KIT 129.
BS EN 60371-3-4:1996, IEC 60371-3-4:1992 BS EN 60371-3-4:1996, IEC 60371-3-4:1992. Specification for insulating materials based on mica. Specifications for individual materials. Polyester film-backed
BS EN 60371-3-6:1996, IEC 60371-3-6:1992 BS EN 60371-3-6:1996, IEC 60371-3-6:1992. Specification for insulating materials based on mica. Specifications for individual materials. Gloss-backed mica pape
KIT 129 KIT 129.
KIT 129 KIT 129.
BS 5000-11:1973 BS 5000-11:1973. Specification for rotating electrical machines of particular types or for particular applications. Small-power electric motors and generators
KIT 129 KIT 129.
BS EN 60619:1993, IEC 60619:1993 BS EN 60619:1993, IEC 60619:1993. Electrically operated food preparation appliances. Methods for measuring the performance
BS 2982:1992 BS 2982:1992. Specification for materials and packaging of surgical scalpels with detachable blades
BS 5808:1991 BS 5808:1991. Specification for underlays for textile floor coverings
BS EN ISO 3759:1995 BS EN ISO 3759:1995. Textiles. Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change
BS EN 61009-2-1:1995 BS EN 61009-2-1:1995. Specification for residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs). Applicability of th
KIT 129 KIT 129.
BS EN 50086-1:1994 BS EN 50086-1:1994. Specification for conduit systems for cable management. General requirements
BS EN 61009-1:1995 BS EN 61009-1:1995. Electrical accessories. Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's). General rules
KIT 129 KIT 129.
BS EN ISO 140-3:1995, BS 2750-3:1995 BS EN ISO 140-3:1995, BS 2750-3:1995. Acoustics. Measurement of sound insulation in buildings and of building elements. Laboratory measurement of airborne sound in
BS EN 60730-2-9:1995 BS EN 60730-2-9:1995. Specification for automatic electrical controls for household and similar use. Particular requirements. Temperature sensing controls
BS EN 60061-4:1992 BS EN 60061-4:1992. Specification for lamp caps and holders together with gauges for the control of interchangeability and safety. Guidelines and general information
BS 8100-1:1986 BS 8100-1:1986. Lattice towers and masts. Code of practice for loading Code of practice for loading
BS 6234:1987 BS 6234:1987. Specification for polyethylene insulation and sheath of electric cables
BS EN 30326-1:1994+A1:2007, ISO 10326-1:1992 BS EN 30326-1:1994+A1:2007, ISO 10326-1:1992. Mechanical vibration. Laboratory method for evaluating vehicle seat vibration. Basic requirements
KIT 129 KIT 129.
BS 6810-1:1987 BS 6810-1:1987. Determination of metals in textiles. Analysis by atomic absorption and colorimetric spectroscopy
WD/INFORMATION SECURITY STANDARDS(KIT20) WD/INFORMATION SECURITY STANDARDS(KIT20). Information security standards kit
KIT 129 KIT 129.
BS 6360:1991 BS 6360:1991. Specification for conductors in insulated cables and cords
SWD/BSI ELECTRONIC CAT.DISK (08/05) SWD/BSI ELECTRONIC CAT.DISK (08/05).
SWD/BSI ELECTRONIC CAT.DISK (09/05) SWD/BSI ELECTRONIC CAT.DISK (09/05).
BS 750:1984 BS 750:1984. Specification for underground fire hydrants and surface box frames and covers
SWD/BSI ELECTRONIC CAT.DISK (10/05) SWD/BSI ELECTRONIC CAT.DISK (10/05).
WD/BIP0023A: PROTEUS CONSULTANT (3 MTHS) WD/BIP0023A: PROTEUS CONSULTANT (3 MTHS). Proteus compliance CONSULTANT
BIP 2039 (QMS Boxed Set) BIP 2039 (QMS Boxed Set). BIP2039 ISO9000 Quality Management. Achieving Registration Presentation Set. Replacement section
BS 6658:1985 BS 6658:1985. Specification for protective helmets for vehicle users
SWD/BSI ELECTRONIC CAT.DISK (11/05) SWD/BSI ELECTRONIC CAT.DISK (11/05).
BS EN 60317-28:1997, IEC 60317-28:1990 BS EN 60317-28:1997, IEC 60317-28:1990. Specifications for particular types of winding wires. Polyesterimide enamelled rectangular copper wire, class 180
BS EN 60371-3-8:1996, IEC 60371-3-8:1995 BS EN 60371-3-8:1996, IEC 60371-3-8:1995. Insulating materials based on mica. Specifications for individual materials. Mica paper tapes for flame-resistant sec
BS 6057-3.13:1993, ISO 2005:1992 BS 6057-3.13:1993, ISO 2005:1992. Rubber latices. Methods of test. Determination of sludge content
SWD/BSI ELECTRONIC CAT.DISK (12/05) SWD/BSI ELECTRONIC CAT.DISK (12/05).
BS 8100-4:1995 BS 8100-4:1995. Lattice towers and masts. Code of practice for loading of guyed masts
BS 2819:1990 BS 2819:1990. Methods for determination of bow, skew and lengthway distortion in woven and knitted fabrics
BS 4443-7:1992+A1:2008 BS 4443-7:1992+A1:2008. Methods of test for flexible cellular materials. Method 17. Determination of tear strength of flexible cellular material with an integral skin
BS 8110-2:1985 BS 8110-2:1985. Structural use of concrete. Code of practice for special circumstances
WD/BS3730 PT1 : 1982, ISO 6318-1985 WD/BS3730 PT1 : 1982, ISO 6318-1985. Assessment of departures from roundness.
WD/BS3730 : 1964, ISO 6318-1985 WD/BS3730 : 1964, ISO 6318-1985.
BS817 : 1972 BS817 : 1972. Specification for surface plates
SWD/BSI ELECTRONIC CAT.DISK (01/06) SWD/BSI ELECTRONIC CAT.DISK (01/06).
BS 4438:1969 BS 4438:1969. Specification for filing cabinets and suspended filing pockets
BS EN 115:1995 BS EN 115:1995. Safety rules for the construction and installation of escalators and passenger conveyors.
BS 3044:1990 BS 3044:1990. Guide to ergonomics principles in the design and selection of office furniture
BS EN 60598-2-25:1995, IEC 60598-2-25:1994 BS EN 60598-2-25:1995, IEC 60598-2-25:1994. Luminaires. Particular requirements. Luminaires for use in clinical areas of hospitals and health care buildings
BS 6779-3:1994 BS 6779-3:1994. Highway parapets for bridges and other structures. Specification for vehicle containment parapets of combined metal and concrete construction
BS EN 71-5:1993, BS 5665-5:1993 BS EN 71-5:1993, BS 5665-5:1993. Safety of toys. Chemical toys (sets) other than experimental sets
SWD/BSI ELECTRONIC CAT.DISK (02/06) SWD/BSI ELECTRONIC CAT.DISK (02/06).
BS 6469-99.2:1992 BS 6469-99.2:1992. Insulating and sheathing materials of electric cables. Test methods used in the United Kingdom but not specified in BS EN 60811. Electrical tests
BS EN 60068-2-64:1995, IEC 60068-2-64:1993 BS EN 60068-2-64:1995, IEC 60068-2-64:1993. Environmental testing. Test methods. Test Fh. Vibration, broad-band random (digital control) and guidance
BS EN ISO 4892-2:2000 BS EN ISO 4892-2:2000. Plastics. Methods of exposure to laboratory light sources. Xenon-arc sources
BS 6068-2.39:1991 BS 6068-2.39:1991. Water quality. Physical, chemical and biochemical methods. Method for the determination of sulphate using barium chloride and gravimetry
SWD/BSI ELECTRONIC CAT.DISK (03/06) SWD/BSI ELECTRONIC CAT.DISK (03/06).
BS EN 10083-1:1991 BS EN 10083-1:1991. Quenched and tempered steels. Technical delivery conditions for special steels
BS SP 57 and 58:1955 BS SP 57 and 58:1955. Specifications for rivet burrs for aircraft
BS SP 107-112:1954 BS SP 107-112:1954. Specifications for tab washers for unified hexagons for aircraft
BS SP 41-46:1951 BS SP 41-46:1951. Specifications for tab washers. For aircraft
BS 5733:1995 BS 5733:1995. Specification for general requirements for electrical accessories
BS EN 40-1:1992 BS EN 40-1:1992. Lighting columns. Definitions and terms
SWD/BSI ELECTRONIC CAT.DISK (04/06) SWD/BSI ELECTRONIC CAT.DISK (04/06).
BS ISO 9057:1991 BS ISO 9057:1991. Glass containers. 28mm tamper-evident finish for pressurized liquids. Dimensions
BS 6480:1988 BS 6480:1988. Specification for impregnated paper-insulated lead or lead alloy sheathed electric cables of rated voltages up to and including 33000 V
SWD/BSI ELECTRONIC CAT.DISK (05/06) SWD/BSI ELECTRONIC CAT.DISK (05/06).
BS EN 60601-1:1990, BS 5724-1:1989 BS EN 60601-1:1990, BS 5724-1:1989. Medical electrical equipment. General requirements for safety
BS 7727:1994 BS 7727:1994. Code of practice for installation and inspection of pre-insulated compression terminals and connectors for cables with copper conductors up to 6 mm2
SWD/BSI ELECTRONIC CAT.DISK (06/06) SWD/BSI ELECTRONIC CAT.DISK (06/06).
SWD/BSI ELECTRONIC CAT.DISK (07/06) SWD/BSI ELECTRONIC CAT.DISK (07/06).
BS 4533-102.19:1990, EN 60598-2-19:1989 BS 4533-102.19:1990, EN 60598-2-19:1989. Luminaires. Particular requirements. Specification for air-handling luminaires (safety requirements)
BS EN 615:1995 BS EN 615:1995. Fire protection. Fire extinguishing media. Specifications for powders (other than class D powders)
BS EN 71-3:1995, BS 5665-3:1995 BS EN 71-3:1995, BS 5665-3:1995. Safety of toys. Specification for migration of certain elements
SWD/BSI ELECTRONIC CAT.DISK (08/06) SWD/BSI ELECTRONIC CAT.DISK (08/06).
BS EN ISO 9905:1998 BS EN ISO 9905:1998. Technical specifications for centrifugal pumps. Class I
BS EN 304:1992 BS EN 304:1992. Heating boilers. Test code for heating boilers for atomizing oil burners
BS 5268-6.1:1996 BS 5268-6.1:1996. Structural use of timber. Code of practice for timber frame walls. Dwellings not exceeding seven storeys
BS 31100:2008 (Paperback) BS 31100:2008 (Paperback). Code of practice for risk management
BS EN 297:1994 BS EN 297:1994. Gas-fired central heating boilers. Type B11 and B11BS boilers fitted with atmospheric burners of nominal heat input not exceeding 70 kW
BS 3449:1990 BS 3449:1990. Method for resistance of fabrics to water absorption (Static immersion test)
BS EN 61057:1994 BS EN 61057:1994. Aerial devices with insulating boom used for live working exceeding 1 kV a.c.
SWD/BSI ELECTRONIC CAT.DISK (09/06) SWD/BSI ELECTRONIC CAT.DISK (09/06).
SEC SCREEN UNDER&IMP BS7858 STD CH4-10-6 SEC SCREEN UNDER&IMP BS7858 STD CH4-10-6.
SEC SCREEN UNDER&IMP BS7858 PUB CH4-10-6 SEC SCREEN UNDER&IMP BS7858 PUB CH4-10-6.
BS EN 60264-4-2:1995, IEC 60264-4-2:1992 BS EN 60264-4-2:1995, IEC 60264-4-2:1992. Packaging of winding wires. Methods of test. Containers made from thermoplastic material for taper barrelled delivery
BS EN 61000-3-3:1995, IEC 61000-3-3:1994 BS EN 61000-3-3:1995, IEC 61000-3-3:1994. Electromagnetic compatibility (EMC). Limits. Limitation of voltage changes, voltage fluctuations and flicker in publi
BS EN ISO 4022:2006 BS EN ISO 4022:2006. Permeable sintered metal materials. Determination of fluid permeability
WD/BEST PRAC ISRM USE BS7799 11/12-12-06 WD/BEST PRAC ISRM USE BS7799 11/12-12-06.
ISEB CERT IN SAM 6-8-11-06 ISEB CERT IN SAM 6-8-11-06.
BS 7818:1995 BS 7818:1995. Specification for pedestrian restraint systems in metal
SWD/BSI ELECTRONIC CAT.DISK (10/06) SWD/BSI ELECTRONIC CAT.DISK (10/06).
WD/KIT195 DSGN OF FIRE DET INST BS5839-1 WD/KIT195 DSGN OF FIRE DET INST BS5839-1. KIT195 Design of fire detection installations BS 5839-1 Kit
BS 1363-1:1995 BS 1363-1:1995. 13 A plugs, socket-outlets, adaptors and connection units. Specification for rewirable and non-rewirable 13 A fused plugs
BS 1363-2:1995 BS 1363-2:1995. 13 A plugs, socket-outlets, adaptors and connection units. Specification for 13 A switched and unswitched socket-outlets
BS 1363-3:1995 BS 1363-3:1995. 13 A plugs, socket-outlets, adaptors and connection units. Specification for adaptors
BS 1363-4:1995 BS 1363-4:1995. 13 A plugs, socket-outlets, adaptors and connection units. Specification for 13 A fused connection units switched and unswitched
SWD/BSI ELECTRONIC CAT.DISK (11/06) SWD/BSI ELECTRONIC CAT.DISK (11/06).
WD/ISEB FOI CH2/3/4/17/18/19/20/27-04-07 WD/ISEB FOI CH2/3/4/17/18/19/20/27-04-07.
BS 5950-3.1:1990 BS 5950-3.1:1990. Structural use of steelwork in building. Design in composite construction. Code of practice for design of simple and continuous composite beams
BS 5400-9.1:1983 BS 5400-9.1:1983. Steel, concrete and composite bridges. Bridge bearings. Code of practice for design of bridge bearings
BS 7751-2:1994 BS 7751-2:1994. Prevailing torque type wire thread inserts. Specification for ISO metric fine pitch threads
BS 7751-1:1994 BS 7751-1:1994. Prevailing torque type wire thread inserts. Specification for ISO metric coarse pitch threads
ERROR ERROR.
SEC SCREEN UNDER&IMP BS7858 PUBCH300107 SEC SCREEN UNDER&IMP BS7858 PUBCH300107.
SEC SCREEN UNDER&IMP BS7858 STDCH220507 SEC SCREEN UNDER&IMP BS7858 STDCH220507.
SEC SCREEN UNDER&IMP BS7858 PUBCH220507 SEC SCREEN UNDER&IMP BS7858 PUBCH220507.
SEC SCREEN UNDER&IMP BS7858 STDCH300107 SEC SCREEN UNDER&IMP BS7858 STDCH300107.
BS 857:1967 BS 857:1967. Specification for safety glass for land transport
SWD/BSI ELECTRONIC CAT.DISK (12/06) SWD/BSI ELECTRONIC CAT.DISK (12/06).
BS ISO 1496-4:1991 BS ISO 1496-4:1991. Series 1 freight containers. Specification and testing. Non-pressurized containers for dry bulk
CILSMP WLB 5-9 02 07 CILSMP WLB 5-9 02 07.
CILSMP WLB 23-27 04 07 CILSMP WLB 23-27 04 07.
CILSMP WLB 18-22 06 07 CILSMP WLB 18-22 06 07.
CILSMP WLB 17-21 09 07 CILSMP WLB 17-21 09 07.
CILSMP WLB 12-16 11 07 CILSMP WLB 12-16 11 07.
ISEB PC INFO RSK MGMT 12-16 0207 ISEB PC INFO RSK MGMT 12-16 0207.
ISEB PC INFO RSK MGMT 16-20 0407 ISEB PC INFO RSK MGMT 16-20 0407.
WD/ISEB PC INFO RSK MGMT 21-25 0507 WD/ISEB PC INFO RSK MGMT 21-25 0507.
WD/ISEB PC INFO RSK MGMT 02-07 0707 WD/ISEB PC INFO RSK MGMT 02-07 0707.
ISEB PC INFO RSK MGMT 10-14 0907 ISEB PC INFO RSK MGMT 10-14 0907.
ISEB PC INFO RSK MGMT 19-23 1107 ISEB PC INFO RSK MGMT 19-23 1107.
ISEB CERT IN SAM 05-07 0207 ISEB CERT IN SAM 05-07 0207.
ISEB CERT IN SAM 12-14 0307 ISEB CERT IN SAM 12-14 0307.
ISEB CERT IN SAM 21-23 0507 ISEB CERT IN SAM 21-23 0507.
ISEB CERT IN SAM 02-04 0707 ISEB CERT IN SAM 02-04 0707.
ISEB CERT IN SAM 24-26 0907 ISEB CERT IN SAM 24-26 0907.
ISEB CERT IN SAM 26-28 1107 ISEB CERT IN SAM 26-28 1107.
WD/BSI ELECTRONIC CAT.DISK (01/07) WD/BSI ELECTRONIC CAT.DISK (01/07).
BS 4177:1992 BS 4177:1992. Specification for cooker control units
CP 2010-2:1970 CP 2010-2:1970. Code of practice for pipelines. Design and construction of steel pipelines in land
BS 6140-2:1982, ISO 6070:1981 BS 6140-2:1982, ISO 6070:1981. Test equipment for generating vibration. Methods of describing characteristics of auxiliary tables for test equipment for generating vibrat
BS EN ISO 787-25:2006, ISO 787-25:1993 BS EN ISO 787-25:2006, ISO 787-25:1993. General methods of test for pigments and extenders. Comparison of the colour, in full-shade systems, of white, black and
SWD/BSI ELECTRONIC CAT.DISK (02/07) SWD/BSI ELECTRONIC CAT.DISK (02/07).
NSSF Meeting 200107 NSSF Meeting 200107.
BS 8008:1996+A1:2008 BS 8008:1996+A1:2008. Safety precautions and procedures for the construction and descent of machine-bored shafts for piling and other purposes
SWD/BSI ELECTRONIC CAT.DISK (03/07) SWD/BSI ELECTRONIC CAT.DISK (03/07).
BS 7164-3:1992, ISO 1407:1992 BS 7164-3:1992, ISO 1407:1992. Chemical tests for raw and vulcanized rubber. Methods for determination of solvent extract
BS EN ISO 6504-1:2006, BS 3900-D7:1983 BS EN ISO 6504-1:2006, BS 3900-D7:1983. Paints and varnishes. Determination of hiding power. Kubelka-Munk method for white and light-coloured paints
BS EN 60155:1995, IEC 60155:1993 BS EN 60155:1995, IEC 60155:1993. Glow-starters for fluorescent lamps
BS 5315:1991 BS 5315:1991. Hose clamps (worm drive type) for general purpose use (metric series)
SWD/BSI ELECTRONIC CAT.DISK (04/07) SWD/BSI ELECTRONIC CAT.DISK (04/07).
BS 5896:1980 BS 5896:1980. Specification for high tensile steel wire and strand for the prestressing of concrete
BS EN 60264-1:1994+A1:2009, IEC 60264-1:1968 BS EN 60264-1:1994+A1:2009, IEC 60264-1:1968. Packaging of winding wires. Containers for round winding wires
BS 5839-3:1988 BS 5839-3:1988. Fire detection and alarm systems for buildings. Specification for automatic release mechanisms for certain fire protection equipment
BS ISO 3767-4:1993+A2:2008 BS ISO 3767-4:1993+A2:2008. Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Symbols for operator controls and other displays. Symbols fo
SWD/BSI ELECTRONIC CAT.DISK (05/07) SWD/BSI ELECTRONIC CAT.DISK (05/07).
BS 7273-2:1992 BS 7273-2:1992. Code of practice for the operation of fire protection measures. Mechanical actuation of gaseous total flooding and local application extinguishing systems
BS 6469-99-1:1992 BS 6469-99-1:1992. Insulating and sheathing materials of electric cables. Test methods used in the United Kingdom but not specified in BS EN 60811. Non-electrical tests
BS EN 60064:1995+A4:2007 BS EN 60064:1995+A4:2007. Tungsten filament lamps for domestic and similar general lighting purposes. Performance requirements
SWD/BSI ELECTRONIC CAT.DISK (06/07) SWD/BSI ELECTRONIC CAT.DISK (06/07).
BS EN 60439-3:1991 BS EN 60439-3:1991. Specification for low-voltage switchgear and controlgear assemblies. Particular requirements for low-voltage switchgear and controlgear assemblies intended to be
BS 5892-1:1992 BS 5892-1:1992. Railway rolling stock materials. Specification for axles for traction and trailing stock
SWD/BSI ELECTRONIC CAT.DISK (07/07) SWD/BSI ELECTRONIC CAT.DISK (07/07).
BS 1377-9:1990 BS 1377-9:1990. Methods for test for soils for civil engineering purposes. In-situ tests
BS EN ISO 4869-2:1995 BS EN ISO 4869-2:1995. Acoustics. Hearing protectors. Estimation of effective A-weighted sound pressure levels when hearing protectors are worn
BS 7752-1:1994+A1:2008 BS 7752-1:1994+A1:2008. Free running type wire thread inserts. Specification for ISO metric coarse pitch threads
BS EN ISO 6327:2008 BS EN ISO 6327:2008. Gas analysis. Determination of the water dew point of natural gas. Cooled surface condensation hygrometers
SWD/BSI ELECTRONIC CAT.DISK (08/07) SWD/BSI ELECTRONIC CAT.DISK (08/07).
PD ISO Guide 30:1993+A1:2008 PD ISO Guide 30:1993+A1:2008. Reference materials . Guide to terms and definitions used in connection with reference materials
BS 2795:1981 BS 2795:1981. Specification for dial test indicators (lever type) for linear measurement
BS 5892-5:1987+A2:2008 BS 5892-5:1987+A2:2008. Railway rolling stock material (metric). Specification for steel bars for retaining rings for tyred wheels
SWD/BSI ELECTRONIC CAT.DISK (09/07) SWD/BSI ELECTRONIC CAT.DISK (09/07).
IEC 62305-2(E) SIRAC CD IEC 62305-2(E) SIRAC CD. IEC 61305-2(E) Simplified IEC Risk Assessment Calculator (SIRAC)
SWD/BSI ELECTRONIC CAT.DISK (10/07) SWD/BSI ELECTRONIC CAT.DISK (10/07).
BS EN 50069:1991+A1:1993 BS EN 50069:1991+A1:1993. Specification for welded composite enclosures of cast and wrought aluminium alloys for gas-filled high- voltage switchgear and controlgear
BS 6878:1988+A2:1993, EN 50052:1986 BS 6878:1988+A2:1993, EN 50052:1986. Specification for high-voltage switchgear and controlgear for industrial use. Cast aluminium alloy enclosures or gas-filled hig
BS 7315:1990+A1:1993, EN 50064:1989+A1:1993 BS 7315:1990+A1:1993, EN 50064:1989+A1:1993. Specification for wrought aluminium and aluminium alloy enclosures for gas-filled high-voltage switchgear and c
BS EN 10051:1991+A1:1997 BS EN 10051:1991+A1:1997. Continuously hot-rolled uncoated plate, sheet and strip of non-alloy and alloy steels. Tolerances on dimensions and shape
SWD/BSI ELECTRONIC CAT.DISK (11/07) SWD/BSI ELECTRONIC CAT.DISK (11/07).
BS EN 349:1993+A1:2008 BS EN 349:1993+A1:2008. Safety of machinery. Minimum gaps to avoid crushing of parts of the human body
BS EN 626-1:1994+A1:2008 BS EN 626-1:1994+A1:2008. Safety of machinery. Reduction of risks to health from Hazardous substances emitted by machinery. Principles and specifications for machinery manufac
SWD/BSI ELECTRONIC CAT.DISK (12/07) SWD/BSI ELECTRONIC CAT.DISK (12/07).
BS ISO/IEC 9541-3:1994+A2:2009 BS ISO/IEC 9541-3:1994+A2:2009. Information technology. Font information interchange. Glyph shape representation
BS 2049:1985 BS 2049:1985. Specification for paraffin lighting appliances for domestic use
BS 3690-1:1989+A2:2008 BS 3690-1:1989+A2:2008. Bitumens for building and civil engineering. Specification for bitumens for roads and other paved areas
BS SP 114:1955 BS SP 114:1955. Specification for eye bolts (unified threads) for aircraft
BS EN ISO 6009:1994 BS EN ISO 6009:1994. Hypodermic needles for single use. Colour coding for identification
BS 7505:1995 BS 7505:1995. Specification for the elastic properties of flat, non- adhesive, extensible fabric bandages
BS 25999-2:2007 (Spanish) BS 25999-2:2007 (Spanish). Business continuity management . Specification
BS 5892-3:1992+A2:2009 BS 5892-3:1992+A2:2009. Railway rolling stock materials. Specification for monobloc wheels for traction and trailing stock
BS 7609:1992+A2:2009 BS 7609:1992+A2:2009. Code of practice for installation and inspection of uninsulated compression and mechanical connectors for power cables with copper or aluminium conductors
BS 949-1:1992 BS 949-1:1992. Screwing taps. Specification of general dimensions
BS 3655:1981+A1:2009 BS 3655:1981+A1:2009. Recommendations for informative labelling of textile floor coverings
BS EN ISO 12777-1:1996+A1:2008 BS EN ISO 12777-1:1996+A1:2008. Methods of test for pallet joints. Determination of bending resistance of pallet nails, other dowel-type fasteners and staples
BS 4825-1:1991+A2:2009 BS 4825-1:1991+A2:2009. Stainless steel tubes and fittings for the food industry and other hygienic applications. Specification for tubes
BS 4825-2:1991+A2:2009 BS 4825-2:1991+A2:2009. Stainless steel tubes and fittings for the food industry and other hygienic applications. Specification for bends and tees
BS 4825-3:1991+A2:2009 BS 4825-3:1991+A2:2009. Stainless steel tubes and fittings for the food industry and other hygienic applications. Specification for clamp type couplings
BS 4825-4:1991+A1:2009 BS 4825-4:1991+A1:2009. Stainless steel tubes and fittings for the food industry and other hygienic applications. Specification for threaded (IDF type) coupling
BS 4825-5:1991+A1:2009 BS 4825-5:1991+A1:2009. Stainless steel tubes and fittings for the food industry and other hygienic applications. Specification for recessed ring joint type couplings
BS EN ISO 9001:2008 (A5 Laminated) BS EN ISO 9001:2008 (A5 Laminated). Quality management systems. Requirements
BS SP 11:1949+A2:2009 BS SP 11:1949+A2:2009. Specification for washers for aircraft purposes. (primarily for facing purposes)
BS SP 127:1959+A2:2009 BS SP 127:1959+A2:2009. Washers for unified hexagons for aircraft (primarily for facing purposes )
BIP 0002:2009 BIP 0002:2009. Data Protection: Guidelines for the Use of Personal Data in System Testing (Second Edition)
BS 6593:1985+A1:2009 BS 6593:1985+A1:2009. Code of practice for on-site non-mechanical jointing of plied textile and steel reinforced conveyor belting
PAS 82:2009 PAS 82:2009. Shopfitting management system specification
BS 5395-2:1984 BS 5395-2:1984. Stairs, ladders and walkways. Code of practice for the design of helical and spiral stairs
BIP 2187:2009 BIP 2187:2009. Energy Management Principles and Practice: A Companion to BS EN 16001:2009
BIP PP1990 : 2007 Book (single copy) BIP PP1990 : 2007 Book (single copy). BIP PP 1990 Structural Eurocodes. Extracts from the Structural Eurocodes for students of structural design
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
